summaryrefslogtreecommitdiff
path: root/include/linux/power/max17042_battery.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/power/max17042_battery.h')
-rw-r--r--include/linux/power/max17042_battery.h220
1 files changed, 220 insertions, 0 deletions
diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h
new file mode 100644
index 000000000..cf112b407
--- /dev/null
+++ b/include/linux/power/max17042_battery.h
@@ -0,0 +1,220 @@
+/*
+ * Fuel gauge driver for Maxim 17042 / 8966 / 8997
+ * Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MAX17042_BATTERY_H_
+#define __MAX17042_BATTERY_H_
+
+#define MAX17042_STATUS_BattAbsent (1 << 3)
+#define MAX17042_BATTERY_FULL (100)
+#define MAX17042_DEFAULT_SNS_RESISTOR (10000)
+
+#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
+
+enum max17042_register {
+ MAX17042_STATUS = 0x00,
+ MAX17042_VALRT_Th = 0x01,
+ MAX17042_TALRT_Th = 0x02,
+ MAX17042_SALRT_Th = 0x03,
+ MAX17042_AtRate = 0x04,
+ MAX17042_RepCap = 0x05,
+ MAX17042_RepSOC = 0x06,
+ MAX17042_Age = 0x07,
+ MAX17042_TEMP = 0x08,
+ MAX17042_VCELL = 0x09,
+ MAX17042_Current = 0x0A,
+ MAX17042_AvgCurrent = 0x0B,
+
+ MAX17042_SOC = 0x0D,
+ MAX17042_AvSOC = 0x0E,
+ MAX17042_RemCap = 0x0F,
+ MAX17042_FullCAP = 0x10,
+ MAX17042_TTE = 0x11,
+ MAX17042_V_empty = 0x12,
+
+ MAX17042_RSLOW = 0x14,
+
+ MAX17042_AvgTA = 0x16,
+ MAX17042_Cycles = 0x17,
+ MAX17042_DesignCap = 0x18,
+ MAX17042_AvgVCELL = 0x19,
+ MAX17042_MinMaxTemp = 0x1A,
+ MAX17042_MinMaxVolt = 0x1B,
+ MAX17042_MinMaxCurr = 0x1C,
+ MAX17042_CONFIG = 0x1D,
+ MAX17042_ICHGTerm = 0x1E,
+ MAX17042_AvCap = 0x1F,
+ MAX17042_ManName = 0x20,
+ MAX17042_DevName = 0x21,
+
+ MAX17042_FullCAPNom = 0x23,
+ MAX17042_TempNom = 0x24,
+ MAX17042_TempLim = 0x25,
+ MAX17042_TempHot = 0x26,
+ MAX17042_AIN = 0x27,
+ MAX17042_LearnCFG = 0x28,
+ MAX17042_FilterCFG = 0x29,
+ MAX17042_RelaxCFG = 0x2A,
+ MAX17042_MiscCFG = 0x2B,
+ MAX17042_TGAIN = 0x2C,
+ MAx17042_TOFF = 0x2D,
+ MAX17042_CGAIN = 0x2E,
+ MAX17042_COFF = 0x2F,
+
+ MAX17042_MaskSOC = 0x32,
+ MAX17042_SOC_empty = 0x33,
+ MAX17042_T_empty = 0x34,
+
+ MAX17042_FullCAP0 = 0x35,
+ MAX17042_LAvg_empty = 0x36,
+ MAX17042_FCTC = 0x37,
+ MAX17042_RCOMP0 = 0x38,
+ MAX17042_TempCo = 0x39,
+ MAX17042_EmptyTempCo = 0x3A,
+ MAX17042_K_empty0 = 0x3B,
+ MAX17042_TaskPeriod = 0x3C,
+ MAX17042_FSTAT = 0x3D,
+
+ MAX17042_SHDNTIMER = 0x3F,
+
+ MAX17042_dQacc = 0x45,
+ MAX17042_dPacc = 0x46,
+
+ MAX17042_VFSOC0 = 0x48,
+
+ MAX17042_QH = 0x4D,
+ MAX17042_QL = 0x4E,
+
+ MAX17042_VFSOC0Enable = 0x60,
+ MAX17042_MLOCKReg1 = 0x62,
+ MAX17042_MLOCKReg2 = 0x63,
+
+ MAX17042_MODELChrTbl = 0x80,
+
+ MAX17042_OCV = 0xEE,
+
+ MAX17042_OCVInternal = 0xFB,
+
+ MAX17042_VFSOC = 0xFF,
+};
+
+/* Registers specific to max17047/50 */
+enum max17047_register {
+ MAX17047_QRTbl00 = 0x12,
+ MAX17047_FullSOCThr = 0x13,
+ MAX17047_QRTbl10 = 0x22,
+ MAX17047_QRTbl20 = 0x32,
+ MAX17047_V_empty = 0x3A,
+ MAX17047_QRTbl30 = 0x42,
+};
+
+enum max170xx_chip_type {
+ MAXIM_DEVICE_TYPE_UNKNOWN = 0,
+ MAXIM_DEVICE_TYPE_MAX17042,
+ MAXIM_DEVICE_TYPE_MAX17047,
+ MAXIM_DEVICE_TYPE_MAX17050,
+
+ MAXIM_DEVICE_TYPE_NUM
+};
+
+/*
+ * used for setting a register to a desired value
+ * addr : address for a register
+ * data : setting value for the register
+ */
+struct max17042_reg_data {
+ u8 addr;
+ u16 data;
+};
+
+struct max17042_config_data {
+ /* External current sense resistor value in milli-ohms */
+ u32 cur_sense_val;
+
+ /* A/D measurement */
+ u16 tgain; /* 0x2C */
+ u16 toff; /* 0x2D */
+ u16 cgain; /* 0x2E */
+ u16 coff; /* 0x2F */
+
+ /* Alert / Status */
+ u16 valrt_thresh; /* 0x01 */
+ u16 talrt_thresh; /* 0x02 */
+ u16 soc_alrt_thresh; /* 0x03 */
+ u16 config; /* 0x01D */
+ u16 shdntimer; /* 0x03F */
+
+ /* App data */
+ u16 full_soc_thresh; /* 0x13 */
+ u16 design_cap; /* 0x18 */
+ u16 ichgt_term; /* 0x1E */
+
+ /* MG3 config */
+ u16 at_rate; /* 0x04 */
+ u16 learn_cfg; /* 0x28 */
+ u16 filter_cfg; /* 0x29 */
+ u16 relax_cfg; /* 0x2A */
+ u16 misc_cfg; /* 0x2B */
+ u16 masksoc; /* 0x32 */
+
+ /* MG3 save and restore */
+ u16 fullcap; /* 0x10 */
+ u16 fullcapnom; /* 0x23 */
+ u16 socempty; /* 0x33 */
+ u16 lavg_empty; /* 0x36 */
+ u16 dqacc; /* 0x45 */
+ u16 dpacc; /* 0x46 */
+ u16 qrtbl00; /* 0x12 */
+ u16 qrtbl10; /* 0x22 */
+ u16 qrtbl20; /* 0x32 */
+ u16 qrtbl30; /* 0x42 */
+
+ /* Cell technology from power_supply.h */
+ u16 cell_technology;
+
+ /* Cell Data */
+ u16 vempty; /* 0x12 */
+ u16 temp_nom; /* 0x24 */
+ u16 temp_lim; /* 0x25 */
+ u16 fctc; /* 0x37 */
+ u16 rcomp0; /* 0x38 */
+ u16 tcompc0; /* 0x39 */
+ u16 empty_tempco; /* 0x3A */
+ u16 kempty0; /* 0x3B */
+ u16 cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE];
+} __packed;
+
+struct max17042_platform_data {
+ struct max17042_reg_data *init_data;
+ struct max17042_config_data *config_data;
+ int num_init_data; /* Number of enties in init_data array */
+ bool enable_current_sense;
+ bool enable_por_init; /* Use POR init from Maxim appnote */
+
+ /*
+ * R_sns in micro-ohms.
+ * default 10000 (if r_sns = 0) as it is the recommended value by
+ * the datasheet although it can be changed by board designers.
+ */
+ unsigned int r_sns;
+};
+
+#endif /* __MAX17042_BATTERY_H_ */