summaryrefslogtreecommitdiff
path: root/include/linux/regulator/machine.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regulator/machine.h')
-rw-r--r--include/linux/regulator/machine.h212
1 files changed, 212 insertions, 0 deletions
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
new file mode 100644
index 000000000..b07562e08
--- /dev/null
+++ b/include/linux/regulator/machine.h
@@ -0,0 +1,212 @@
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE: Regulator output voltage can be changed by software on this
+ * board/machine.
+ * CURRENT: Regulator output current can be changed by software on this
+ * board/machine.
+ * MODE: Regulator operating mode can be changed by software on this
+ * board/machine.
+ * STATUS: Regulator can be enabled and disabled.
+ * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator.
+ * BYPASS: Regulator can be put into bypass mode
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE 0x1
+#define REGULATOR_CHANGE_CURRENT 0x2
+#define REGULATOR_CHANGE_MODE 0x4
+#define REGULATOR_CHANGE_STATUS 0x8
+#define REGULATOR_CHANGE_DRMS 0x10
+#define REGULATOR_CHANGE_BYPASS 0x20
+
+/**
+ * struct regulator_state - regulator state during low power system states
+ *
+ * This describes a regulators state during a system wide low power
+ * state. One of enabled or disabled must be set for the
+ * configuration to be applied.
+ *
+ * @uV: Operating voltage during suspend.
+ * @mode: Operating mode during suspend.
+ * @enabled: Enabled during suspend.
+ * @disabled: Disabled during suspend.
+ */
+struct regulator_state {
+ int uV; /* suspend voltage */
+ unsigned int mode; /* suspend regulator operating mode */
+ int enabled; /* is regulator enabled in this suspend state */
+ int disabled; /* is the regulator disbled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ *
+ * @name: Descriptive name for the constraints, used for display purposes.
+ *
+ * @min_uV: Smallest voltage consumers may set.
+ * @max_uV: Largest voltage consumers may set.
+ * @uV_offset: Offset applied to voltages from consumer to compensate for
+ * voltage drops.
+ *
+ * @min_uA: Smallest current consumers may set.
+ * @max_uA: Largest current consumers may set.
+ *
+ * @valid_modes_mask: Mask of modes which may be configured by consumers.
+ * @valid_ops_mask: Operations which may be performed by consumers.
+ *
+ * @always_on: Set if the regulator should never be disabled.
+ * @boot_on: Set if the regulator is enabled when the system is initially
+ * started. If the regulator is not enabled by the hardware or
+ * bootloader then it will be enabled when the constraints are
+ * applied.
+ * @apply_uV: Apply the voltage constraint when initialising.
+ * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
+ *
+ * @input_uV: Input voltage for regulator when supplied by another regulator.
+ *
+ * @state_disk: State for regulator when system is suspended in disk mode.
+ * @state_mem: State for regulator when system is suspended in mem mode.
+ * @state_standby: State for regulator when system is suspended in standby
+ * mode.
+ * @initial_state: Suspend state to set by default.
+ * @initial_mode: Mode to set at startup.
+ * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @enable_time: Turn-on time of the rails (unit: microseconds)
+ */
+struct regulation_constraints {
+
+ const char *name;
+
+ /* voltage output range (inclusive) - for voltage control */
+ int min_uV;
+ int max_uV;
+
+ int uV_offset;
+
+ /* current output range (inclusive) - for current control */
+ int min_uA;
+ int max_uA;
+
+ /* valid regulator operating modes for this machine */
+ unsigned int valid_modes_mask;
+
+ /* valid operations for regulator on this machine */
+ unsigned int valid_ops_mask;
+
+ /* regulator input voltage - only if supply is another regulator */
+ int input_uV;
+
+ /* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+ struct regulator_state state_disk;
+ struct regulator_state state_mem;
+ struct regulator_state state_standby;
+ suspend_state_t initial_state; /* suspend state to set at init */
+
+ /* mode to set on startup */
+ unsigned int initial_mode;
+
+ unsigned int ramp_delay;
+ unsigned int enable_time;
+
+ /* constraint flags */
+ unsigned always_on:1; /* regulator never off when system is on */
+ unsigned boot_on:1; /* bootloader/firmware enabled regulator */
+ unsigned apply_uV:1; /* apply uV constraint if min == max */
+ unsigned ramp_disable:1; /* disable ramp delay */
+};
+
+/**
+ * struct regulator_consumer_supply - supply -> device mapping
+ *
+ * This maps a supply name to a device. Use of dev_name allows support for
+ * buses which make struct device available late such as I2C.
+ *
+ * @dev_name: Result of dev_name() for the consumer.
+ * @supply: Name for the supply.
+ */
+struct regulator_consumer_supply {
+ const char *dev_name; /* dev_name() for consumer */
+ const char *supply; /* consumer supply - e.g. "vcc" */
+};
+
+/* Initialize struct regulator_consumer_supply */
+#define REGULATOR_SUPPLY(_name, _dev_name) \
+{ \
+ .supply = _name, \
+ .dev_name = _dev_name, \
+}
+
+/**
+ * struct regulator_init_data - regulator platform initialisation data.
+ *
+ * Initialisation constraints, our supply and consumers supplies.
+ *
+ * @supply_regulator: Parent regulator. Specified using the regulator name
+ * as it appears in the name field in sysfs, which can
+ * be explicitly set using the constraints field 'name'.
+ *
+ * @constraints: Constraints. These must be specified for the regulator to
+ * be usable.
+ * @num_consumer_supplies: Number of consumer device supplies.
+ * @consumer_supplies: Consumer device supply configuration.
+ *
+ * @regulator_init: Callback invoked when the regulator has been registered.
+ * @driver_data: Data passed to regulator_init.
+ */
+struct regulator_init_data {
+ const char *supply_regulator; /* or NULL for system supply */
+
+ struct regulation_constraints constraints;
+
+ int num_consumer_supplies;
+ struct regulator_consumer_supply *consumer_supplies;
+
+ /* optional regulator machine specific init */
+ int (*regulator_init)(void *driver_data);
+ void *driver_data; /* core does not touch this */
+};
+
+#ifdef CONFIG_REGULATOR
+void regulator_has_full_constraints(void);
+int regulator_suspend_prepare(suspend_state_t state);
+int regulator_suspend_finish(void);
+#else
+static inline void regulator_has_full_constraints(void)
+{
+}
+static inline int regulator_suspend_prepare(suspend_state_t state)
+{
+ return 0;
+}
+static inline int regulator_suspend_finish(void)
+{
+ return 0;
+}
+#endif
+
+#endif