summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h200
1 files changed, 154 insertions, 46 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7c30faff2..e385eb307 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -5,7 +5,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
- * Copyright (C) 2015 Intel Deutschland GmbH
+ * Copyright (C) 2015 - 2016 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -298,6 +298,7 @@ struct ieee80211_vif_chanctx_switch {
* note that this is only called when it changes after the channel
* context had been assigned.
* @BSS_CHANGED_OCB: OCB join status changed
+ * @BSS_CHANGED_MU_GROUPS: VHT MU-MIMO group id or user position changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -323,6 +324,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_BEACON_INFO = 1<<20,
BSS_CHANGED_BANDWIDTH = 1<<21,
BSS_CHANGED_OCB = 1<<22,
+ BSS_CHANGED_MU_GROUPS = 1<<23,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -436,6 +438,19 @@ struct ieee80211_event {
};
/**
+ * struct ieee80211_mu_group_data - STA's VHT MU-MIMO group data
+ *
+ * This structure describes the group id data of VHT MU-MIMO
+ *
+ * @membership: 64 bits array - a bit is set if station is member of the group
+ * @position: 2 bits per group id indicating the position in the group
+ */
+struct ieee80211_mu_group_data {
+ u8 membership[WLAN_MEMBERSHIP_LEN];
+ u8 position[WLAN_USER_POSITION_LEN];
+};
+
+/**
* struct ieee80211_bss_conf - holds the BSS's changing parameters
*
* This structure keeps information about a BSS (and an association
@@ -477,6 +492,7 @@ struct ieee80211_event {
* @enable_beacon: whether beaconing should be enabled or not
* @chandef: Channel definition for this BSS -- the hardware might be
* configured a higher bandwidth than this BSS uses, for example.
+ * @mu_group: VHT MU-MIMO group membership data
* @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
* This field is only valid when the channel is a wide HT/VHT channel.
* Note that with TDLS this can be the case (channel is HT, protection must
@@ -535,6 +551,7 @@ struct ieee80211_bss_conf {
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
struct cfg80211_chan_def chandef;
+ struct ieee80211_mu_group_data mu_group;
__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
int arp_addr_cnt;
bool qos;
@@ -691,12 +708,14 @@ enum mac80211_tx_info_flags {
* protocol frame (e.g. EAP)
* @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
* frame (PS-Poll or uAPSD).
+ * @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
*
* These flags are used in tx_info->control.flags.
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0),
IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1),
+ IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
};
/*
@@ -982,6 +1001,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* flag indicates that the PN was verified for replay protection.
* Note that this flag is also currently only supported when a frame
* is also decrypted (ie. @RX_FLAG_DECRYPTED must be set)
+ * @RX_FLAG_DUP_VALIDATED: The driver should set this flag if it did
+ * de-duplication by itself.
* @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on
* the frame.
* @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
@@ -993,6 +1014,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* @RX_FLAG_MACTIME_END: The timestamp passed in the RX status (@mactime
* field) is valid and contains the time the last symbol of the MPDU
* (including FCS) was received.
+ * @RX_FLAG_MACTIME_PLCP_START: The timestamp passed in the RX status (@mactime
+ * field) is valid and contains the time the SYNC preamble was received.
* @RX_FLAG_SHORTPRE: Short preamble was used for this frame
* @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
* @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index
@@ -1014,6 +1037,14 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
* is stored in the @ampdu_delimiter_crc field)
* @RX_FLAG_LDPC: LDPC was used
+ * @RX_FLAG_ONLY_MONITOR: Report frame only to monitor interfaces without
+ * processing it in any regular way.
+ * This is useful if drivers offload some frames but still want to report
+ * them for sniffing purposes.
+ * @RX_FLAG_SKIP_MONITOR: Process and report frame to all interfaces except
+ * monitor interfaces.
+ * This is useful if drivers offload some frames but still want to report
+ * them for sniffing purposes.
* @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
* @RX_FLAG_10MHZ: 10 MHz (half channel) was used
* @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
@@ -1033,6 +1064,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
RX_FLAG_DECRYPTED = BIT(1),
+ RX_FLAG_MACTIME_PLCP_START = BIT(2),
RX_FLAG_MMIC_STRIPPED = BIT(3),
RX_FLAG_IV_STRIPPED = BIT(4),
RX_FLAG_FAILED_FCS_CRC = BIT(5),
@@ -1046,7 +1078,7 @@ enum mac80211_rx_flags {
RX_FLAG_HT_GF = BIT(13),
RX_FLAG_AMPDU_DETAILS = BIT(14),
RX_FLAG_PN_VALIDATED = BIT(15),
- /* bit 16 free */
+ RX_FLAG_DUP_VALIDATED = BIT(16),
RX_FLAG_AMPDU_LAST_KNOWN = BIT(17),
RX_FLAG_AMPDU_IS_LAST = BIT(18),
RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19),
@@ -1054,6 +1086,8 @@ enum mac80211_rx_flags {
RX_FLAG_MACTIME_END = BIT(21),
RX_FLAG_VHT = BIT(22),
RX_FLAG_LDPC = BIT(23),
+ RX_FLAG_ONLY_MONITOR = BIT(24),
+ RX_FLAG_SKIP_MONITOR = BIT(25),
RX_FLAG_STBC_MASK = BIT(26) | BIT(27),
RX_FLAG_10MHZ = BIT(28),
RX_FLAG_5MHZ = BIT(29),
@@ -1072,6 +1106,7 @@ enum mac80211_rx_flags {
* @RX_VHT_FLAG_160MHZ: 160 MHz was used
* @RX_VHT_FLAG_BF: packet was beamformed
*/
+
enum mac80211_rx_vht_flags {
RX_VHT_FLAG_80MHZ = BIT(0),
RX_VHT_FLAG_160MHZ = BIT(1),
@@ -1091,6 +1126,8 @@ enum mac80211_rx_vht_flags {
* it but can store it and pass it back to the driver for synchronisation
* @band: the active band when this frame was received
* @freq: frequency the radio was tuned to when receiving this frame, in MHz
+ * This field must be set for management frames, but isn't strictly needed
+ * for data (other) frames - for those it only affects radiotap reporting.
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
@@ -1347,6 +1384,7 @@ enum ieee80211_vif_flags {
* @csa_active: marks whether a channel switch is going on. Internally it is
* write-protected by sdata_lock and local->mtx so holding either is fine
* for read access.
+ * @mu_mimo_owner: indicates interface owns MU-MIMO capability
* @driver_flags: flags/capabilities the driver has for this interface,
* these need to be set (or cleared) when the interface is added
* or, if supported by the driver, the interface type is changed
@@ -1373,6 +1411,7 @@ struct ieee80211_vif {
u8 addr[ETH_ALEN];
bool p2p;
bool csa_active;
+ bool mu_mimo_owner;
u8 cab_queue;
u8 hw_queue[IEEE80211_NUM_ACS];
@@ -1486,9 +1525,8 @@ enum ieee80211_key_flags {
* wants to be given when a frame is transmitted and needs to be
* encrypted in hardware.
* @cipher: The key's cipher suite selector.
- * @tx_pn: PN used for TX on non-TKIP keys, may be used by the driver
- * as well if it needs to do software PN assignment by itself
- * (e.g. due to TSO)
+ * @tx_pn: PN used for TX keys, may be used by the driver as well if it
+ * needs to do software PN assignment by itself (e.g. due to TSO)
* @flags: key flags, see &enum ieee80211_key_flags.
* @keyidx: the key index (0-3)
* @keylen: key material length
@@ -1514,6 +1552,9 @@ struct ieee80211_key_conf {
#define IEEE80211_MAX_PN_LEN 16
+#define TKIP_PN_TO_IV16(pn) ((u16)(pn & 0xffff))
+#define TKIP_PN_TO_IV32(pn) ((u32)((pn >> 16) & 0xffffffff))
+
/**
* struct ieee80211_key_seq - key sequence counter
*
@@ -1684,6 +1725,18 @@ struct ieee80211_sta_rates {
* @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
* valid if the STA is a TDLS peer in the first place.
* @mfp: indicates whether the STA uses management frame protection or not.
+ * @max_amsdu_subframes: indicates the maximal number of MSDUs in a single
+ * A-MSDU. Taken from the Extended Capabilities element. 0 means
+ * unlimited.
+ * @max_amsdu_len: indicates the maximal length of an A-MSDU in bytes. This
+ * field is always valid for packets with a VHT preamble. For packets
+ * with a HT preamble, additional limits apply:
+ * + If the skb is transmitted as part of a BA agreement, the
+ * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
+ * + If the skb is not part of a BA aggreement, the A-MSDU maximal
+ * size is min(max_amsdu_len, 7935) bytes.
+ * Both additional HT limits must be enforced by the low level driver.
+ * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2).
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
*/
struct ieee80211_sta {
@@ -1702,6 +1755,8 @@ struct ieee80211_sta {
bool tdls;
bool tdls_initiator;
bool mfp;
+ u8 max_amsdu_subframes;
+ u16 max_amsdu_len;
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
@@ -1910,6 +1965,11 @@ struct ieee80211_txq {
* by just its MAC address; this prevents, for example, the same station
* from connecting to two virtual AP interfaces at the same time.
*
+ * @IEEE80211_HW_SUPPORTS_REORDERING_BUFFER: Hardware (or driver) manages the
+ * reordering buffer internally, guaranteeing mac80211 receives frames in
+ * order and does not need to manage its own reorder buffer or BA session
+ * timeout.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -1946,6 +2006,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_AMSDU_IN_AMPDU,
IEEE80211_HW_BEACON_TX_STATUS,
IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR,
+ IEEE80211_HW_SUPPORTS_REORDERING_BUFFER,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -2167,7 +2228,7 @@ static inline void SET_IEEE80211_DEV(struct ieee80211_hw *hw, struct device *dev
* @hw: the &struct ieee80211_hw to set the MAC address for
* @addr: the address to set
*/
-static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr)
+static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, const u8 *addr)
{
memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN);
}
@@ -2684,6 +2745,33 @@ enum ieee80211_ampdu_mlme_action {
};
/**
+ * struct ieee80211_ampdu_params - AMPDU action parameters
+ *
+ * @action: the ampdu action, value from %ieee80211_ampdu_mlme_action.
+ * @sta: peer of this AMPDU session
+ * @tid: tid of the BA session
+ * @ssn: start sequence number of the session. TX/RX_STOP can pass 0. When
+ * action is set to %IEEE80211_AMPDU_RX_START the driver passes back the
+ * actual ssn value used to start the session and writes the value here.
+ * @buf_size: reorder buffer size (number of subframes). Valid only when the
+ * action is set to %IEEE80211_AMPDU_RX_START or
+ * %IEEE80211_AMPDU_TX_OPERATIONAL
+ * @amsdu: indicates the peer's ability to receive A-MSDU within A-MPDU.
+ * valid when the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL
+ * @timeout: BA session timeout. Valid only when the action is set to
+ * %IEEE80211_AMPDU_RX_START
+ */
+struct ieee80211_ampdu_params {
+ enum ieee80211_ampdu_mlme_action action;
+ struct ieee80211_sta *sta;
+ u16 tid;
+ u16 ssn;
+ u8 buf_size;
+ bool amsdu;
+ u16 timeout;
+};
+
+/**
* enum ieee80211_frame_release_type - frame release reason
* @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll
* @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to
@@ -3027,13 +3115,9 @@ enum ieee80211_reconfig_type {
* @ampdu_action: Perform a certain A-MPDU action
* The RA/TID combination determines the destination and TID we want
* the ampdu action to be performed for. The action is defined through
- * ieee80211_ampdu_mlme_action. Starting sequence number (@ssn)
- * is the first frame we expect to perform the action on. Notice
- * that TX/RX_STOP can pass NULL for this parameter.
- * The @buf_size parameter is only valid when the action is set to
- * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
- * buffer size (number of subframes) for this session -- the driver
- * may neither send aggregates containing more subframes than this
+ * ieee80211_ampdu_mlme_action.
+ * When the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL the driver
+ * may neither send aggregates containing more subframes than @buf_size
* nor send aggregates in a way that lost frames would exceed the
* buffer size. If just limiting the aggregate size, this would be
* possible with a buf_size of 8:
@@ -3044,9 +3128,6 @@ enum ieee80211_reconfig_type {
* buffer size of 8. Correct ways to retransmit #1 would be:
* - TX: 1 or 18 or 81
* Even "189" would be wrong since 1 could be lost again.
- * The @amsdu parameter is valid when the action is set to
- * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's ability
- * to receive A-MSDU within A-MPDU.
*
* Returns a negative error code on failure.
* The callback can sleep.
@@ -3388,9 +3469,7 @@ struct ieee80211_ops {
int (*tx_last_beacon)(struct ieee80211_hw *hw);
int (*ampdu_action)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size, bool amsdu);
+ struct ieee80211_ampdu_params *params);
int (*get_survey)(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void (*rfkill_poll)(struct ieee80211_hw *hw);
@@ -4374,21 +4453,19 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf,
struct sk_buff *skb, u8 *p2k);
/**
- * ieee80211_get_key_tx_seq - get key TX sequence counter
+ * ieee80211_tkip_add_iv - write TKIP IV and Ext. IV to pos
*
+ * @pos: start of crypto header
* @keyconf: the parameter passed with the set key
- * @seq: buffer to receive the sequence data
+ * @pn: PN to add
*
- * This function allows a driver to retrieve the current TX IV/PN
- * for the given key. It must not be called if IV generation is
- * offloaded to the device.
+ * Returns: pointer to the octet following IVs (i.e. beginning of
+ * the packet payload)
*
- * Note that this function may only be called when no TX processing
- * can be done concurrently, for example when queues are stopped
- * and the stop has been synchronized.
+ * This function writes the tkip IV value to pos (which should
+ * point to the crypto header)
*/
-void ieee80211_get_key_tx_seq(struct ieee80211_key_conf *keyconf,
- struct ieee80211_key_seq *seq);
+u8 *ieee80211_tkip_add_iv(u8 *pos, struct ieee80211_key_conf *keyconf, u64 pn);
/**
* ieee80211_get_key_rx_seq - get key RX sequence counter
@@ -4410,23 +4487,6 @@ void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf,
int tid, struct ieee80211_key_seq *seq);
/**
- * ieee80211_set_key_tx_seq - set key TX sequence counter
- *
- * @keyconf: the parameter passed with the set key
- * @seq: new sequence data
- *
- * This function allows a driver to set the current TX IV/PNs for the
- * given key. This is useful when resuming from WoWLAN sleep and the
- * device may have transmitted frames using the PTK, e.g. replies to
- * ARP requests.
- *
- * Note that this function may only be called when no TX processing
- * can be done concurrently.
- */
-void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf,
- struct ieee80211_key_seq *seq);
-
-/**
* ieee80211_set_key_rx_seq - set key RX sequence counter
*
* @keyconf: the parameter passed with the set key
@@ -5121,6 +5181,24 @@ void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap,
const u8 *addr);
/**
+ * ieee80211_mark_rx_ba_filtered_frames - move RX BA window and mark filtered
+ * @pubsta: station struct
+ * @tid: the session's TID
+ * @ssn: starting sequence number of the bitmap, all frames before this are
+ * assumed to be out of the window after the call
+ * @filtered: bitmap of filtered frames, BIT(0) is the @ssn entry etc.
+ * @received_mpdus: number of received mpdus in firmware
+ *
+ * This function moves the BA window and releases all frames before @ssn, and
+ * marks frames marked in the bitmap as having been filtered. Afterwards, it
+ * checks if any frames in the window starting from @ssn can now be released
+ * (in case they were only waiting for frames that were filtered.)
+ */
+void ieee80211_mark_rx_ba_filtered_frames(struct ieee80211_sta *pubsta, u8 tid,
+ u16 ssn, u64 filtered,
+ u16 received_mpdus);
+
+/**
* ieee80211_send_bar - send a BlockAckReq frame
*
* can be used to flush pending frames from the peer's aggregation reorder
@@ -5371,6 +5449,21 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
return ieee80211_iftype_p2p(vif->type, vif->p2p);
}
+/**
+ * ieee80211_update_mu_groups - set the VHT MU-MIMO groud data
+ *
+ * @vif: the specified virtual interface
+ * @membership: 64 bits array - a bit is set if station is member of the group
+ * @position: 2 bits per group id indicating the position in the group
+ *
+ * Note: This function assumes that the given vif is valid and the position and
+ * membership data is of the correct size and are in the same byte order as the
+ * matching GroupId management frame.
+ * Calls to this function need to be serialized with RX path.
+ */
+void ieee80211_update_mu_groups(struct ieee80211_vif *vif,
+ const u8 *membership, const u8 *position);
+
void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
int rssi_min_thold,
int rssi_max_thold);
@@ -5523,4 +5616,19 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid);
*/
struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
struct ieee80211_txq *txq);
+
+/**
+ * ieee80211_txq_get_depth - get pending frame/byte count of given txq
+ *
+ * The values are not guaranteed to be coherent with regard to each other, i.e.
+ * txq state can change half-way of this function and the caller may end up
+ * with "new" frame_cnt and "old" byte_cnt or vice-versa.
+ *
+ * @txq: pointer obtained from station or virtual interface
+ * @frame_cnt: pointer to store frame count
+ * @byte_cnt: pointer to store byte count
+ */
+void ieee80211_txq_get_depth(struct ieee80211_txq *txq,
+ unsigned long *frame_cnt,
+ unsigned long *byte_cnt);
#endif /* MAC80211_H */