summaryrefslogtreecommitdiff
path: root/mm/page-writeback.c
diff options
context:
space:
mode:
Diffstat (limited to 'mm/page-writeback.c')
-rw-r--r--mm/page-writeback.c1233
1 files changed, 801 insertions, 432 deletions
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 1979aed54..db0ff666a 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -138,31 +138,31 @@ EXPORT_SYMBOL(laptop_mode);
/* End of sysctl-exported parameters */
-unsigned long global_dirty_limit;
+struct wb_domain global_wb_domain;
-/*
- * Scale the writeback cache size proportional to the relative writeout speeds.
- *
- * We do this by keeping a floating proportion between BDIs, based on page
- * writeback completions [end_page_writeback()]. Those devices that write out
- * pages fastest will get the larger share, while the slower will get a smaller
- * share.
- *
- * We use page writeout completions because we are interested in getting rid of
- * dirty pages. Having them written out is the primary goal.
- *
- * We introduce a concept of time, a period over which we measure these events,
- * because demand can/will vary over time. The length of this period itself is
- * measured in page writeback completions.
- *
- */
-static struct fprop_global writeout_completions;
+/* consolidated parameters for balance_dirty_pages() and its subroutines */
+struct dirty_throttle_control {
+#ifdef CONFIG_CGROUP_WRITEBACK
+ struct wb_domain *dom;
+ struct dirty_throttle_control *gdtc; /* only set in memcg dtc's */
+#endif
+ struct bdi_writeback *wb;
+ struct fprop_local_percpu *wb_completions;
-static void writeout_period(unsigned long t);
-/* Timer for aging of writeout_completions */
-static struct timer_list writeout_period_timer =
- TIMER_DEFERRED_INITIALIZER(writeout_period, 0, 0);
-static unsigned long writeout_period_time = 0;
+ unsigned long avail; /* dirtyable */
+ unsigned long dirty; /* file_dirty + write + nfs */
+ unsigned long thresh; /* dirty threshold */
+ unsigned long bg_thresh; /* dirty background threshold */
+
+ unsigned long wb_dirty; /* per-wb counterparts */
+ unsigned long wb_thresh;
+ unsigned long wb_bg_thresh;
+
+ unsigned long pos_ratio;
+};
+
+#define DTC_INIT_COMMON(__wb) .wb = (__wb), \
+ .wb_completions = &(__wb)->completions
/*
* Length of period for aging writeout fractions of bdis. This is an
@@ -171,6 +171,97 @@ static unsigned long writeout_period_time = 0;
*/
#define VM_COMPLETIONS_PERIOD_LEN (3*HZ)
+#ifdef CONFIG_CGROUP_WRITEBACK
+
+#define GDTC_INIT(__wb) .dom = &global_wb_domain, \
+ DTC_INIT_COMMON(__wb)
+#define GDTC_INIT_NO_WB .dom = &global_wb_domain
+#define MDTC_INIT(__wb, __gdtc) .dom = mem_cgroup_wb_domain(__wb), \
+ .gdtc = __gdtc, \
+ DTC_INIT_COMMON(__wb)
+
+static bool mdtc_valid(struct dirty_throttle_control *dtc)
+{
+ return dtc->dom;
+}
+
+static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
+{
+ return dtc->dom;
+}
+
+static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
+{
+ return mdtc->gdtc;
+}
+
+static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
+{
+ return &wb->memcg_completions;
+}
+
+static void wb_min_max_ratio(struct bdi_writeback *wb,
+ unsigned long *minp, unsigned long *maxp)
+{
+ unsigned long this_bw = wb->avg_write_bandwidth;
+ unsigned long tot_bw = atomic_long_read(&wb->bdi->tot_write_bandwidth);
+ unsigned long long min = wb->bdi->min_ratio;
+ unsigned long long max = wb->bdi->max_ratio;
+
+ /*
+ * @wb may already be clean by the time control reaches here and
+ * the total may not include its bw.
+ */
+ if (this_bw < tot_bw) {
+ if (min) {
+ min *= this_bw;
+ do_div(min, tot_bw);
+ }
+ if (max < 100) {
+ max *= this_bw;
+ do_div(max, tot_bw);
+ }
+ }
+
+ *minp = min;
+ *maxp = max;
+}
+
+#else /* CONFIG_CGROUP_WRITEBACK */
+
+#define GDTC_INIT(__wb) DTC_INIT_COMMON(__wb)
+#define GDTC_INIT_NO_WB
+#define MDTC_INIT(__wb, __gdtc)
+
+static bool mdtc_valid(struct dirty_throttle_control *dtc)
+{
+ return false;
+}
+
+static struct wb_domain *dtc_dom(struct dirty_throttle_control *dtc)
+{
+ return &global_wb_domain;
+}
+
+static struct dirty_throttle_control *mdtc_gdtc(struct dirty_throttle_control *mdtc)
+{
+ return NULL;
+}
+
+static struct fprop_local_percpu *wb_memcg_completions(struct bdi_writeback *wb)
+{
+ return NULL;
+}
+
+static void wb_min_max_ratio(struct bdi_writeback *wb,
+ unsigned long *minp, unsigned long *maxp)
+{
+ *minp = wb->bdi->min_ratio;
+ *maxp = wb->bdi->max_ratio;
+}
+
+#endif /* CONFIG_CGROUP_WRITEBACK */
+
/*
* In a memory zone, there is a certain amount of pages we consider
* available for the page cache, which is essentially the number of
@@ -266,42 +357,88 @@ static unsigned long global_dirtyable_memory(void)
return x + 1; /* Ensure that we never return 0 */
}
-/*
- * global_dirty_limits - background-writeback and dirty-throttling thresholds
+/**
+ * domain_dirty_limits - calculate thresh and bg_thresh for a wb_domain
+ * @dtc: dirty_throttle_control of interest
*
- * Calculate the dirty thresholds based on sysctl parameters
- * - vm.dirty_background_ratio or vm.dirty_background_bytes
- * - vm.dirty_ratio or vm.dirty_bytes
- * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
+ * Calculate @dtc->thresh and ->bg_thresh considering
+ * vm_dirty_{bytes|ratio} and dirty_background_{bytes|ratio}. The caller
+ * must ensure that @dtc->avail is set before calling this function. The
+ * dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
* real-time tasks.
*/
-void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
+static void domain_dirty_limits(struct dirty_throttle_control *dtc)
{
- const unsigned long available_memory = global_dirtyable_memory();
- unsigned long background;
- unsigned long dirty;
+ const unsigned long available_memory = dtc->avail;
+ struct dirty_throttle_control *gdtc = mdtc_gdtc(dtc);
+ unsigned long bytes = vm_dirty_bytes;
+ unsigned long bg_bytes = dirty_background_bytes;
+ unsigned long ratio = vm_dirty_ratio;
+ unsigned long bg_ratio = dirty_background_ratio;
+ unsigned long thresh;
+ unsigned long bg_thresh;
struct task_struct *tsk;
- if (vm_dirty_bytes)
- dirty = DIV_ROUND_UP(vm_dirty_bytes, PAGE_SIZE);
+ /* gdtc is !NULL iff @dtc is for memcg domain */
+ if (gdtc) {
+ unsigned long global_avail = gdtc->avail;
+
+ /*
+ * The byte settings can't be applied directly to memcg
+ * domains. Convert them to ratios by scaling against
+ * globally available memory.
+ */
+ if (bytes)
+ ratio = min(DIV_ROUND_UP(bytes, PAGE_SIZE) * 100 /
+ global_avail, 100UL);
+ if (bg_bytes)
+ bg_ratio = min(DIV_ROUND_UP(bg_bytes, PAGE_SIZE) * 100 /
+ global_avail, 100UL);
+ bytes = bg_bytes = 0;
+ }
+
+ if (bytes)
+ thresh = DIV_ROUND_UP(bytes, PAGE_SIZE);
else
- dirty = (vm_dirty_ratio * available_memory) / 100;
+ thresh = (ratio * available_memory) / 100;
- if (dirty_background_bytes)
- background = DIV_ROUND_UP(dirty_background_bytes, PAGE_SIZE);
+ if (bg_bytes)
+ bg_thresh = DIV_ROUND_UP(bg_bytes, PAGE_SIZE);
else
- background = (dirty_background_ratio * available_memory) / 100;
+ bg_thresh = (bg_ratio * available_memory) / 100;
- if (background >= dirty)
- background = dirty / 2;
+ if (bg_thresh >= thresh)
+ bg_thresh = thresh / 2;
tsk = current;
if (tsk->flags & PF_LESS_THROTTLE || rt_task(tsk)) {
- background += background / 4;
- dirty += dirty / 4;
+ bg_thresh += bg_thresh / 4;
+ thresh += thresh / 4;
}
- *pbackground = background;
- *pdirty = dirty;
- trace_global_dirty_state(background, dirty);
+ dtc->thresh = thresh;
+ dtc->bg_thresh = bg_thresh;
+
+ /* we should eventually report the domain in the TP */
+ if (!gdtc)
+ trace_global_dirty_state(bg_thresh, thresh);
+}
+
+/**
+ * global_dirty_limits - background-writeback and dirty-throttling thresholds
+ * @pbackground: out parameter for bg_thresh
+ * @pdirty: out parameter for thresh
+ *
+ * Calculate bg_thresh and thresh for global_wb_domain. See
+ * domain_dirty_limits() for details.
+ */
+void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
+{
+ struct dirty_throttle_control gdtc = { GDTC_INIT_NO_WB };
+
+ gdtc.avail = global_dirtyable_memory();
+ domain_dirty_limits(&gdtc);
+
+ *pbackground = gdtc.bg_thresh;
+ *pdirty = gdtc.thresh;
}
/**
@@ -408,47 +545,52 @@ static unsigned long wp_next_time(unsigned long cur_time)
return cur_time;
}
-/*
- * Increment the BDI's writeout completion count and the global writeout
- * completion count. Called from test_clear_page_writeback().
- */
-static inline void __bdi_writeout_inc(struct backing_dev_info *bdi)
+static void wb_domain_writeout_inc(struct wb_domain *dom,
+ struct fprop_local_percpu *completions,
+ unsigned int max_prop_frac)
{
- __inc_bdi_stat(bdi, BDI_WRITTEN);
- __fprop_inc_percpu_max(&writeout_completions, &bdi->completions,
- bdi->max_prop_frac);
+ __fprop_inc_percpu_max(&dom->completions, completions,
+ max_prop_frac);
/* First event after period switching was turned off? */
- if (!unlikely(writeout_period_time)) {
+ if (!unlikely(dom->period_time)) {
/*
* We can race with other __bdi_writeout_inc calls here but
* it does not cause any harm since the resulting time when
* timer will fire and what is in writeout_period_time will be
* roughly the same.
*/
- writeout_period_time = wp_next_time(jiffies);
- mod_timer(&writeout_period_timer, writeout_period_time);
+ dom->period_time = wp_next_time(jiffies);
+ mod_timer(&dom->period_timer, dom->period_time);
}
}
-void bdi_writeout_inc(struct backing_dev_info *bdi)
+/*
+ * Increment @wb's writeout completion count and the global writeout
+ * completion count. Called from test_clear_page_writeback().
+ */
+static inline void __wb_writeout_inc(struct bdi_writeback *wb)
{
- unsigned long flags;
+ struct wb_domain *cgdom;
- local_irq_save(flags);
- __bdi_writeout_inc(bdi);
- local_irq_restore(flags);
+ __inc_wb_stat(wb, WB_WRITTEN);
+ wb_domain_writeout_inc(&global_wb_domain, &wb->completions,
+ wb->bdi->max_prop_frac);
+
+ cgdom = mem_cgroup_wb_domain(wb);
+ if (cgdom)
+ wb_domain_writeout_inc(cgdom, wb_memcg_completions(wb),
+ wb->bdi->max_prop_frac);
}
-EXPORT_SYMBOL_GPL(bdi_writeout_inc);
-/*
- * Obtain an accurate fraction of the BDI's portion.
- */
-static void bdi_writeout_fraction(struct backing_dev_info *bdi,
- long *numerator, long *denominator)
+void wb_writeout_inc(struct bdi_writeback *wb)
{
- fprop_fraction_percpu(&writeout_completions, &bdi->completions,
- numerator, denominator);
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __wb_writeout_inc(wb);
+ local_irq_restore(flags);
}
+EXPORT_SYMBOL_GPL(wb_writeout_inc);
/*
* On idle system, we can be called long after we scheduled because we use
@@ -456,22 +598,46 @@ static void bdi_writeout_fraction(struct backing_dev_info *bdi,
*/
static void writeout_period(unsigned long t)
{
- int miss_periods = (jiffies - writeout_period_time) /
+ struct wb_domain *dom = (void *)t;
+ int miss_periods = (jiffies - dom->period_time) /
VM_COMPLETIONS_PERIOD_LEN;
- if (fprop_new_period(&writeout_completions, miss_periods + 1)) {
- writeout_period_time = wp_next_time(writeout_period_time +
+ if (fprop_new_period(&dom->completions, miss_periods + 1)) {
+ dom->period_time = wp_next_time(dom->period_time +
miss_periods * VM_COMPLETIONS_PERIOD_LEN);
- mod_timer(&writeout_period_timer, writeout_period_time);
+ mod_timer(&dom->period_timer, dom->period_time);
} else {
/*
* Aging has zeroed all fractions. Stop wasting CPU on period
* updates.
*/
- writeout_period_time = 0;
+ dom->period_time = 0;
}
}
+int wb_domain_init(struct wb_domain *dom, gfp_t gfp)
+{
+ memset(dom, 0, sizeof(*dom));
+
+ spin_lock_init(&dom->lock);
+
+ init_timer_deferrable(&dom->period_timer);
+ dom->period_timer.function = writeout_period;
+ dom->period_timer.data = (unsigned long)dom;
+
+ dom->dirty_limit_tstamp = jiffies;
+
+ return fprop_global_init(&dom->completions, gfp);
+}
+
+#ifdef CONFIG_CGROUP_WRITEBACK
+void wb_domain_exit(struct wb_domain *dom)
+{
+ del_timer_sync(&dom->period_timer);
+ fprop_global_destroy(&dom->completions);
+}
+#endif
+
/*
* bdi_min_ratio keeps the sum of the minimum dirty shares of all
* registered backing devices, which, for obvious reasons, can not
@@ -526,17 +692,26 @@ static unsigned long dirty_freerun_ceiling(unsigned long thresh,
return (thresh + bg_thresh) / 2;
}
-static unsigned long hard_dirty_limit(unsigned long thresh)
+static unsigned long hard_dirty_limit(struct wb_domain *dom,
+ unsigned long thresh)
{
- return max(thresh, global_dirty_limit);
+ return max(thresh, dom->dirty_limit);
+}
+
+/* memory available to a memcg domain is capped by system-wide clean memory */
+static void mdtc_cap_avail(struct dirty_throttle_control *mdtc)
+{
+ struct dirty_throttle_control *gdtc = mdtc_gdtc(mdtc);
+ unsigned long clean = gdtc->avail - min(gdtc->avail, gdtc->dirty);
+
+ mdtc->avail = min(mdtc->avail, clean);
}
/**
- * bdi_dirty_limit - @bdi's share of dirty throttling threshold
- * @bdi: the backing_dev_info to query
- * @dirty: global dirty limit in pages
+ * __wb_calc_thresh - @wb's share of dirty throttling threshold
+ * @dtc: dirty_throttle_context of interest
*
- * Returns @bdi's dirty limit in pages. The term "dirty" in the context of
+ * Returns @wb's dirty limit in pages. The term "dirty" in the context of
* dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages.
*
* Note that balance_dirty_pages() will only seriously take it as a hard limit
@@ -544,34 +719,47 @@ static unsigned long hard_dirty_limit(unsigned long thresh)
* control. For example, when the device is completely stalled due to some error
* conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
* In the other normal situations, it acts more gently by throttling the tasks
- * more (rather than completely block them) when the bdi dirty pages go high.
+ * more (rather than completely block them) when the wb dirty pages go high.
*
* It allocates high/low dirty limits to fast/slow devices, in order to prevent
* - starving fast devices
* - piling up dirty pages (that will take long time to sync) on slow devices
*
- * The bdi's share of dirty limit will be adapting to its throughput and
+ * The wb's share of dirty limit will be adapting to its throughput and
* bounded by the bdi->min_ratio and/or bdi->max_ratio parameters, if set.
*/
-unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
+static unsigned long __wb_calc_thresh(struct dirty_throttle_control *dtc)
{
- u64 bdi_dirty;
+ struct wb_domain *dom = dtc_dom(dtc);
+ unsigned long thresh = dtc->thresh;
+ u64 wb_thresh;
long numerator, denominator;
+ unsigned long wb_min_ratio, wb_max_ratio;
/*
- * Calculate this BDI's share of the dirty ratio.
+ * Calculate this BDI's share of the thresh ratio.
*/
- bdi_writeout_fraction(bdi, &numerator, &denominator);
+ fprop_fraction_percpu(&dom->completions, dtc->wb_completions,
+ &numerator, &denominator);
- bdi_dirty = (dirty * (100 - bdi_min_ratio)) / 100;
- bdi_dirty *= numerator;
- do_div(bdi_dirty, denominator);
+ wb_thresh = (thresh * (100 - bdi_min_ratio)) / 100;
+ wb_thresh *= numerator;
+ do_div(wb_thresh, denominator);
- bdi_dirty += (dirty * bdi->min_ratio) / 100;
- if (bdi_dirty > (dirty * bdi->max_ratio) / 100)
- bdi_dirty = dirty * bdi->max_ratio / 100;
+ wb_min_max_ratio(dtc->wb, &wb_min_ratio, &wb_max_ratio);
- return bdi_dirty;
+ wb_thresh += (thresh * wb_min_ratio) / 100;
+ if (wb_thresh > (thresh * wb_max_ratio) / 100)
+ wb_thresh = thresh * wb_max_ratio / 100;
+
+ return wb_thresh;
+}
+
+unsigned long wb_calc_thresh(struct bdi_writeback *wb, unsigned long thresh)
+{
+ struct dirty_throttle_control gdtc = { GDTC_INIT(wb),
+ .thresh = thresh };
+ return __wb_calc_thresh(&gdtc);
}
/*
@@ -610,7 +798,7 @@ static long long pos_ratio_polynom(unsigned long setpoint,
*
* (o) global/bdi setpoints
*
- * We want the dirty pages be balanced around the global/bdi setpoints.
+ * We want the dirty pages be balanced around the global/wb setpoints.
* When the number of dirty pages is higher/lower than the setpoint, the
* dirty position control ratio (and hence task dirty ratelimit) will be
* decreased/increased to bring the dirty pages back to the setpoint.
@@ -620,8 +808,8 @@ static long long pos_ratio_polynom(unsigned long setpoint,
* if (dirty < setpoint) scale up pos_ratio
* if (dirty > setpoint) scale down pos_ratio
*
- * if (bdi_dirty < bdi_setpoint) scale up pos_ratio
- * if (bdi_dirty > bdi_setpoint) scale down pos_ratio
+ * if (wb_dirty < wb_setpoint) scale up pos_ratio
+ * if (wb_dirty > wb_setpoint) scale down pos_ratio
*
* task_ratelimit = dirty_ratelimit * pos_ratio >> RATELIMIT_CALC_SHIFT
*
@@ -646,7 +834,7 @@ static long long pos_ratio_polynom(unsigned long setpoint,
* 0 +------------.------------------.----------------------*------------->
* freerun^ setpoint^ limit^ dirty pages
*
- * (o) bdi control line
+ * (o) wb control line
*
* ^ pos_ratio
* |
@@ -672,33 +860,32 @@ static long long pos_ratio_polynom(unsigned long setpoint,
* | . .
* | . .
* 0 +----------------------.-------------------------------.------------->
- * bdi_setpoint^ x_intercept^
+ * wb_setpoint^ x_intercept^
*
- * The bdi control line won't drop below pos_ratio=1/4, so that bdi_dirty can
+ * The wb control line won't drop below pos_ratio=1/4, so that wb_dirty can
* be smoothly throttled down to normal if it starts high in situations like
* - start writing to a slow SD card and a fast disk at the same time. The SD
- * card's bdi_dirty may rush to many times higher than bdi_setpoint.
- * - the bdi dirty thresh drops quickly due to change of JBOD workload
+ * card's wb_dirty may rush to many times higher than wb_setpoint.
+ * - the wb dirty thresh drops quickly due to change of JBOD workload
*/
-static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
- unsigned long thresh,
- unsigned long bg_thresh,
- unsigned long dirty,
- unsigned long bdi_thresh,
- unsigned long bdi_dirty)
-{
- unsigned long write_bw = bdi->avg_write_bandwidth;
- unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
- unsigned long limit = hard_dirty_limit(thresh);
+static void wb_position_ratio(struct dirty_throttle_control *dtc)
+{
+ struct bdi_writeback *wb = dtc->wb;
+ unsigned long write_bw = wb->avg_write_bandwidth;
+ unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
+ unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
+ unsigned long wb_thresh = dtc->wb_thresh;
unsigned long x_intercept;
unsigned long setpoint; /* dirty pages' target balance point */
- unsigned long bdi_setpoint;
+ unsigned long wb_setpoint;
unsigned long span;
long long pos_ratio; /* for scaling up/down the rate limit */
long x;
- if (unlikely(dirty >= limit))
- return 0;
+ dtc->pos_ratio = 0;
+
+ if (unlikely(dtc->dirty >= limit))
+ return;
/*
* global setpoint
@@ -706,165 +893,167 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi,
* See comment for pos_ratio_polynom().
*/
setpoint = (freerun + limit) / 2;
- pos_ratio = pos_ratio_polynom(setpoint, dirty, limit);
+ pos_ratio = pos_ratio_polynom(setpoint, dtc->dirty, limit);
/*
* The strictlimit feature is a tool preventing mistrusted filesystems
* from growing a large number of dirty pages before throttling. For
- * such filesystems balance_dirty_pages always checks bdi counters
- * against bdi limits. Even if global "nr_dirty" is under "freerun".
+ * such filesystems balance_dirty_pages always checks wb counters
+ * against wb limits. Even if global "nr_dirty" is under "freerun".
* This is especially important for fuse which sets bdi->max_ratio to
* 1% by default. Without strictlimit feature, fuse writeback may
* consume arbitrary amount of RAM because it is accounted in
* NR_WRITEBACK_TEMP which is not involved in calculating "nr_dirty".
*
- * Here, in bdi_position_ratio(), we calculate pos_ratio based on
- * two values: bdi_dirty and bdi_thresh. Let's consider an example:
+ * Here, in wb_position_ratio(), we calculate pos_ratio based on
+ * two values: wb_dirty and wb_thresh. Let's consider an example:
* total amount of RAM is 16GB, bdi->max_ratio is equal to 1%, global
* limits are set by default to 10% and 20% (background and throttle).
- * Then bdi_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
- * bdi_dirty_limit(bdi, bg_thresh) is about ~4K pages. bdi_setpoint is
- * about ~6K pages (as the average of background and throttle bdi
+ * Then wb_thresh is 1% of 20% of 16GB. This amounts to ~8K pages.
+ * wb_calc_thresh(wb, bg_thresh) is about ~4K pages. wb_setpoint is
+ * about ~6K pages (as the average of background and throttle wb
* limits). The 3rd order polynomial will provide positive feedback if
- * bdi_dirty is under bdi_setpoint and vice versa.
+ * wb_dirty is under wb_setpoint and vice versa.
*
* Note, that we cannot use global counters in these calculations
- * because we want to throttle process writing to a strictlimit BDI
+ * because we want to throttle process writing to a strictlimit wb
* much earlier than global "freerun" is reached (~23MB vs. ~2.3GB
* in the example above).
*/
- if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
- long long bdi_pos_ratio;
- unsigned long bdi_bg_thresh;
+ if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
+ long long wb_pos_ratio;
- if (bdi_dirty < 8)
- return min_t(long long, pos_ratio * 2,
- 2 << RATELIMIT_CALC_SHIFT);
+ if (dtc->wb_dirty < 8) {
+ dtc->pos_ratio = min_t(long long, pos_ratio * 2,
+ 2 << RATELIMIT_CALC_SHIFT);
+ return;
+ }
- if (bdi_dirty >= bdi_thresh)
- return 0;
+ if (dtc->wb_dirty >= wb_thresh)
+ return;
- bdi_bg_thresh = div_u64((u64)bdi_thresh * bg_thresh, thresh);
- bdi_setpoint = dirty_freerun_ceiling(bdi_thresh,
- bdi_bg_thresh);
+ wb_setpoint = dirty_freerun_ceiling(wb_thresh,
+ dtc->wb_bg_thresh);
- if (bdi_setpoint == 0 || bdi_setpoint == bdi_thresh)
- return 0;
+ if (wb_setpoint == 0 || wb_setpoint == wb_thresh)
+ return;
- bdi_pos_ratio = pos_ratio_polynom(bdi_setpoint, bdi_dirty,
- bdi_thresh);
+ wb_pos_ratio = pos_ratio_polynom(wb_setpoint, dtc->wb_dirty,
+ wb_thresh);
/*
- * Typically, for strictlimit case, bdi_setpoint << setpoint
- * and pos_ratio >> bdi_pos_ratio. In the other words global
+ * Typically, for strictlimit case, wb_setpoint << setpoint
+ * and pos_ratio >> wb_pos_ratio. In the other words global
* state ("dirty") is not limiting factor and we have to
- * make decision based on bdi counters. But there is an
+ * make decision based on wb counters. But there is an
* important case when global pos_ratio should get precedence:
* global limits are exceeded (e.g. due to activities on other
- * BDIs) while given strictlimit BDI is below limit.
+ * wb's) while given strictlimit wb is below limit.
*
- * "pos_ratio * bdi_pos_ratio" would work for the case above,
+ * "pos_ratio * wb_pos_ratio" would work for the case above,
* but it would look too non-natural for the case of all
- * activity in the system coming from a single strictlimit BDI
+ * activity in the system coming from a single strictlimit wb
* with bdi->max_ratio == 100%.
*
* Note that min() below somewhat changes the dynamics of the
* control system. Normally, pos_ratio value can be well over 3
- * (when globally we are at freerun and bdi is well below bdi
+ * (when globally we are at freerun and wb is well below wb
* setpoint). Now the maximum pos_ratio in the same situation
* is 2. We might want to tweak this if we observe the control
* system is too slow to adapt.
*/
- return min(pos_ratio, bdi_pos_ratio);
+ dtc->pos_ratio = min(pos_ratio, wb_pos_ratio);
+ return;
}
/*
* We have computed basic pos_ratio above based on global situation. If
- * the bdi is over/under its share of dirty pages, we want to scale
+ * the wb is over/under its share of dirty pages, we want to scale
* pos_ratio further down/up. That is done by the following mechanism.
*/
/*
- * bdi setpoint
+ * wb setpoint
*
- * f(bdi_dirty) := 1.0 + k * (bdi_dirty - bdi_setpoint)
+ * f(wb_dirty) := 1.0 + k * (wb_dirty - wb_setpoint)
*
- * x_intercept - bdi_dirty
+ * x_intercept - wb_dirty
* := --------------------------
- * x_intercept - bdi_setpoint
+ * x_intercept - wb_setpoint
*
- * The main bdi control line is a linear function that subjects to
+ * The main wb control line is a linear function that subjects to
*
- * (1) f(bdi_setpoint) = 1.0
- * (2) k = - 1 / (8 * write_bw) (in single bdi case)
- * or equally: x_intercept = bdi_setpoint + 8 * write_bw
+ * (1) f(wb_setpoint) = 1.0
+ * (2) k = - 1 / (8 * write_bw) (in single wb case)
+ * or equally: x_intercept = wb_setpoint + 8 * write_bw
*
- * For single bdi case, the dirty pages are observed to fluctuate
+ * For single wb case, the dirty pages are observed to fluctuate
* regularly within range
- * [bdi_setpoint - write_bw/2, bdi_setpoint + write_bw/2]
+ * [wb_setpoint - write_bw/2, wb_setpoint + write_bw/2]
* for various filesystems, where (2) can yield in a reasonable 12.5%
* fluctuation range for pos_ratio.
*
- * For JBOD case, bdi_thresh (not bdi_dirty!) could fluctuate up to its
+ * For JBOD case, wb_thresh (not wb_dirty!) could fluctuate up to its
* own size, so move the slope over accordingly and choose a slope that
- * yields 100% pos_ratio fluctuation on suddenly doubled bdi_thresh.
+ * yields 100% pos_ratio fluctuation on suddenly doubled wb_thresh.
*/
- if (unlikely(bdi_thresh > thresh))
- bdi_thresh = thresh;
+ if (unlikely(wb_thresh > dtc->thresh))
+ wb_thresh = dtc->thresh;
/*
- * It's very possible that bdi_thresh is close to 0 not because the
+ * It's very possible that wb_thresh is close to 0 not because the
* device is slow, but that it has remained inactive for long time.
* Honour such devices a reasonable good (hopefully IO efficient)
* threshold, so that the occasional writes won't be blocked and active
* writes can rampup the threshold quickly.
*/
- bdi_thresh = max(bdi_thresh, (limit - dirty) / 8);
+ wb_thresh = max(wb_thresh, (limit - dtc->dirty) / 8);
/*
- * scale global setpoint to bdi's:
- * bdi_setpoint = setpoint * bdi_thresh / thresh
+ * scale global setpoint to wb's:
+ * wb_setpoint = setpoint * wb_thresh / thresh
*/
- x = div_u64((u64)bdi_thresh << 16, thresh | 1);
- bdi_setpoint = setpoint * (u64)x >> 16;
+ x = div_u64((u64)wb_thresh << 16, dtc->thresh | 1);
+ wb_setpoint = setpoint * (u64)x >> 16;
/*
- * Use span=(8*write_bw) in single bdi case as indicated by
- * (thresh - bdi_thresh ~= 0) and transit to bdi_thresh in JBOD case.
+ * Use span=(8*write_bw) in single wb case as indicated by
+ * (thresh - wb_thresh ~= 0) and transit to wb_thresh in JBOD case.
*
- * bdi_thresh thresh - bdi_thresh
- * span = ---------- * (8 * write_bw) + ------------------- * bdi_thresh
- * thresh thresh
+ * wb_thresh thresh - wb_thresh
+ * span = --------- * (8 * write_bw) + ------------------ * wb_thresh
+ * thresh thresh
*/
- span = (thresh - bdi_thresh + 8 * write_bw) * (u64)x >> 16;
- x_intercept = bdi_setpoint + span;
+ span = (dtc->thresh - wb_thresh + 8 * write_bw) * (u64)x >> 16;
+ x_intercept = wb_setpoint + span;
- if (bdi_dirty < x_intercept - span / 4) {
- pos_ratio = div64_u64(pos_ratio * (x_intercept - bdi_dirty),
- (x_intercept - bdi_setpoint) | 1);
+ if (dtc->wb_dirty < x_intercept - span / 4) {
+ pos_ratio = div64_u64(pos_ratio * (x_intercept - dtc->wb_dirty),
+ (x_intercept - wb_setpoint) | 1);
} else
pos_ratio /= 4;
/*
- * bdi reserve area, safeguard against dirty pool underrun and disk idle
+ * wb reserve area, safeguard against dirty pool underrun and disk idle
* It may push the desired control point of global dirty pages higher
* than setpoint.
*/
- x_intercept = bdi_thresh / 2;
- if (bdi_dirty < x_intercept) {
- if (bdi_dirty > x_intercept / 8)
- pos_ratio = div_u64(pos_ratio * x_intercept, bdi_dirty);
+ x_intercept = wb_thresh / 2;
+ if (dtc->wb_dirty < x_intercept) {
+ if (dtc->wb_dirty > x_intercept / 8)
+ pos_ratio = div_u64(pos_ratio * x_intercept,
+ dtc->wb_dirty);
else
pos_ratio *= 8;
}
- return pos_ratio;
+ dtc->pos_ratio = pos_ratio;
}
-static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
- unsigned long elapsed,
- unsigned long written)
+static void wb_update_write_bandwidth(struct bdi_writeback *wb,
+ unsigned long elapsed,
+ unsigned long written)
{
const unsigned long period = roundup_pow_of_two(3 * HZ);
- unsigned long avg = bdi->avg_write_bandwidth;
- unsigned long old = bdi->write_bandwidth;
+ unsigned long avg = wb->avg_write_bandwidth;
+ unsigned long old = wb->write_bandwidth;
u64 bw;
/*
@@ -877,14 +1066,14 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
* @written may have decreased due to account_page_redirty().
* Avoid underflowing @bw calculation.
*/
- bw = written - min(written, bdi->written_stamp);
+ bw = written - min(written, wb->written_stamp);
bw *= HZ;
if (unlikely(elapsed > period)) {
do_div(bw, elapsed);
avg = bw;
goto out;
}
- bw += (u64)bdi->write_bandwidth * (period - elapsed);
+ bw += (u64)wb->write_bandwidth * (period - elapsed);
bw >>= ilog2(period);
/*
@@ -897,21 +1086,22 @@ static void bdi_update_write_bandwidth(struct backing_dev_info *bdi,
avg += (old - avg) >> 3;
out:
- bdi->write_bandwidth = bw;
- bdi->avg_write_bandwidth = avg;
+ /* keep avg > 0 to guarantee that tot > 0 if there are dirty wbs */
+ avg = max(avg, 1LU);
+ if (wb_has_dirty_io(wb)) {
+ long delta = avg - wb->avg_write_bandwidth;
+ WARN_ON_ONCE(atomic_long_add_return(delta,
+ &wb->bdi->tot_write_bandwidth) <= 0);
+ }
+ wb->write_bandwidth = bw;
+ wb->avg_write_bandwidth = avg;
}
-/*
- * The global dirtyable memory and dirty threshold could be suddenly knocked
- * down by a large amount (eg. on the startup of KVM in a swapless system).
- * This may throw the system into deep dirty exceeded state and throttle
- * heavy/light dirtiers alike. To retain good responsiveness, maintain
- * global_dirty_limit for tracking slowly down to the knocked down dirty
- * threshold.
- */
-static void update_dirty_limit(unsigned long thresh, unsigned long dirty)
+static void update_dirty_limit(struct dirty_throttle_control *dtc)
{
- unsigned long limit = global_dirty_limit;
+ struct wb_domain *dom = dtc_dom(dtc);
+ unsigned long thresh = dtc->thresh;
+ unsigned long limit = dom->dirty_limit;
/*
* Follow up in one step.
@@ -924,63 +1114,57 @@ static void update_dirty_limit(unsigned long thresh, unsigned long dirty)
/*
* Follow down slowly. Use the higher one as the target, because thresh
* may drop below dirty. This is exactly the reason to introduce
- * global_dirty_limit which is guaranteed to lie above the dirty pages.
+ * dom->dirty_limit which is guaranteed to lie above the dirty pages.
*/
- thresh = max(thresh, dirty);
+ thresh = max(thresh, dtc->dirty);
if (limit > thresh) {
limit -= (limit - thresh) >> 5;
goto update;
}
return;
update:
- global_dirty_limit = limit;
+ dom->dirty_limit = limit;
}
-static void global_update_bandwidth(unsigned long thresh,
- unsigned long dirty,
+static void domain_update_bandwidth(struct dirty_throttle_control *dtc,
unsigned long now)
{
- static DEFINE_SPINLOCK(dirty_lock);
- static unsigned long update_time = INITIAL_JIFFIES;
+ struct wb_domain *dom = dtc_dom(dtc);
/*
* check locklessly first to optimize away locking for the most time
*/
- if (time_before(now, update_time + BANDWIDTH_INTERVAL))
+ if (time_before(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL))
return;
- spin_lock(&dirty_lock);
- if (time_after_eq(now, update_time + BANDWIDTH_INTERVAL)) {
- update_dirty_limit(thresh, dirty);
- update_time = now;
+ spin_lock(&dom->lock);
+ if (time_after_eq(now, dom->dirty_limit_tstamp + BANDWIDTH_INTERVAL)) {
+ update_dirty_limit(dtc);
+ dom->dirty_limit_tstamp = now;
}
- spin_unlock(&dirty_lock);
+ spin_unlock(&dom->lock);
}
/*
- * Maintain bdi->dirty_ratelimit, the base dirty throttle rate.
+ * Maintain wb->dirty_ratelimit, the base dirty throttle rate.
*
- * Normal bdi tasks will be curbed at or below it in long term.
+ * Normal wb tasks will be curbed at or below it in long term.
* Obviously it should be around (write_bw / N) when there are N dd tasks.
*/
-static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
- unsigned long thresh,
- unsigned long bg_thresh,
- unsigned long dirty,
- unsigned long bdi_thresh,
- unsigned long bdi_dirty,
- unsigned long dirtied,
- unsigned long elapsed)
-{
- unsigned long freerun = dirty_freerun_ceiling(thresh, bg_thresh);
- unsigned long limit = hard_dirty_limit(thresh);
+static void wb_update_dirty_ratelimit(struct dirty_throttle_control *dtc,
+ unsigned long dirtied,
+ unsigned long elapsed)
+{
+ struct bdi_writeback *wb = dtc->wb;
+ unsigned long dirty = dtc->dirty;
+ unsigned long freerun = dirty_freerun_ceiling(dtc->thresh, dtc->bg_thresh);
+ unsigned long limit = hard_dirty_limit(dtc_dom(dtc), dtc->thresh);
unsigned long setpoint = (freerun + limit) / 2;
- unsigned long write_bw = bdi->avg_write_bandwidth;
- unsigned long dirty_ratelimit = bdi->dirty_ratelimit;
+ unsigned long write_bw = wb->avg_write_bandwidth;
+ unsigned long dirty_ratelimit = wb->dirty_ratelimit;
unsigned long dirty_rate;
unsigned long task_ratelimit;
unsigned long balanced_dirty_ratelimit;
- unsigned long pos_ratio;
unsigned long step;
unsigned long x;
@@ -988,20 +1172,18 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
* The dirty rate will match the writeout rate in long term, except
* when dirty pages are truncated by userspace or re-dirtied by FS.
*/
- dirty_rate = (dirtied - bdi->dirtied_stamp) * HZ / elapsed;
+ dirty_rate = (dirtied - wb->dirtied_stamp) * HZ / elapsed;
- pos_ratio = bdi_position_ratio(bdi, thresh, bg_thresh, dirty,
- bdi_thresh, bdi_dirty);
/*
* task_ratelimit reflects each dd's dirty rate for the past 200ms.
*/
task_ratelimit = (u64)dirty_ratelimit *
- pos_ratio >> RATELIMIT_CALC_SHIFT;
+ dtc->pos_ratio >> RATELIMIT_CALC_SHIFT;
task_ratelimit++; /* it helps rampup dirty_ratelimit from tiny values */
/*
* A linear estimation of the "balanced" throttle rate. The theory is,
- * if there are N dd tasks, each throttled at task_ratelimit, the bdi's
+ * if there are N dd tasks, each throttled at task_ratelimit, the wb's
* dirty_rate will be measured to be (N * task_ratelimit). So the below
* formula will yield the balanced rate limit (write_bw / N).
*
@@ -1040,7 +1222,7 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
/*
* We could safely do this and return immediately:
*
- * bdi->dirty_ratelimit = balanced_dirty_ratelimit;
+ * wb->dirty_ratelimit = balanced_dirty_ratelimit;
*
* However to get a more stable dirty_ratelimit, the below elaborated
* code makes use of task_ratelimit to filter out singular points and
@@ -1074,32 +1256,31 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
step = 0;
/*
- * For strictlimit case, calculations above were based on bdi counters
- * and limits (starting from pos_ratio = bdi_position_ratio() and up to
+ * For strictlimit case, calculations above were based on wb counters
+ * and limits (starting from pos_ratio = wb_position_ratio() and up to
* balanced_dirty_ratelimit = task_ratelimit * write_bw / dirty_rate).
- * Hence, to calculate "step" properly, we have to use bdi_dirty as
- * "dirty" and bdi_setpoint as "setpoint".
+ * Hence, to calculate "step" properly, we have to use wb_dirty as
+ * "dirty" and wb_setpoint as "setpoint".
*
- * We rampup dirty_ratelimit forcibly if bdi_dirty is low because
- * it's possible that bdi_thresh is close to zero due to inactivity
- * of backing device (see the implementation of bdi_dirty_limit()).
+ * We rampup dirty_ratelimit forcibly if wb_dirty is low because
+ * it's possible that wb_thresh is close to zero due to inactivity
+ * of backing device.
*/
- if (unlikely(bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
- dirty = bdi_dirty;
- if (bdi_dirty < 8)
- setpoint = bdi_dirty + 1;
+ if (unlikely(wb->bdi->capabilities & BDI_CAP_STRICTLIMIT)) {
+ dirty = dtc->wb_dirty;
+ if (dtc->wb_dirty < 8)
+ setpoint = dtc->wb_dirty + 1;
else
- setpoint = (bdi_thresh +
- bdi_dirty_limit(bdi, bg_thresh)) / 2;
+ setpoint = (dtc->wb_thresh + dtc->wb_bg_thresh) / 2;
}
if (dirty < setpoint) {
- x = min3(bdi->balanced_dirty_ratelimit,
+ x = min3(wb->balanced_dirty_ratelimit,
balanced_dirty_ratelimit, task_ratelimit);
if (dirty_ratelimit < x)
step = x - dirty_ratelimit;
} else {
- x = max3(bdi->balanced_dirty_ratelimit,
+ x = max3(wb->balanced_dirty_ratelimit,
balanced_dirty_ratelimit, task_ratelimit);
if (dirty_ratelimit > x)
step = dirty_ratelimit - x;
@@ -1121,69 +1302,67 @@ static void bdi_update_dirty_ratelimit(struct backing_dev_info *bdi,
else
dirty_ratelimit -= step;
- bdi->dirty_ratelimit = max(dirty_ratelimit, 1UL);
- bdi->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
+ wb->dirty_ratelimit = max(dirty_ratelimit, 1UL);
+ wb->balanced_dirty_ratelimit = balanced_dirty_ratelimit;
- trace_bdi_dirty_ratelimit(bdi, dirty_rate, task_ratelimit);
+ trace_bdi_dirty_ratelimit(wb->bdi, dirty_rate, task_ratelimit);
}
-void __bdi_update_bandwidth(struct backing_dev_info *bdi,
- unsigned long thresh,
- unsigned long bg_thresh,
- unsigned long dirty,
- unsigned long bdi_thresh,
- unsigned long bdi_dirty,
- unsigned long start_time)
+static void __wb_update_bandwidth(struct dirty_throttle_control *gdtc,
+ struct dirty_throttle_control *mdtc,
+ unsigned long start_time,
+ bool update_ratelimit)
{
+ struct bdi_writeback *wb = gdtc->wb;
unsigned long now = jiffies;
- unsigned long elapsed = now - bdi->bw_time_stamp;
+ unsigned long elapsed = now - wb->bw_time_stamp;
unsigned long dirtied;
unsigned long written;
+ lockdep_assert_held(&wb->list_lock);
+
/*
* rate-limit, only update once every 200ms.
*/
if (elapsed < BANDWIDTH_INTERVAL)
return;
- dirtied = percpu_counter_read(&bdi->bdi_stat[BDI_DIRTIED]);
- written = percpu_counter_read(&bdi->bdi_stat[BDI_WRITTEN]);
+ dirtied = percpu_counter_read(&wb->stat[WB_DIRTIED]);
+ written = percpu_counter_read(&wb->stat[WB_WRITTEN]);
/*
* Skip quiet periods when disk bandwidth is under-utilized.
* (at least 1s idle time between two flusher runs)
*/
- if (elapsed > HZ && time_before(bdi->bw_time_stamp, start_time))
+ if (elapsed > HZ && time_before(wb->bw_time_stamp, start_time))
goto snapshot;
- if (thresh) {
- global_update_bandwidth(thresh, dirty, now);
- bdi_update_dirty_ratelimit(bdi, thresh, bg_thresh, dirty,
- bdi_thresh, bdi_dirty,
- dirtied, elapsed);
+ if (update_ratelimit) {
+ domain_update_bandwidth(gdtc, now);
+ wb_update_dirty_ratelimit(gdtc, dirtied, elapsed);
+
+ /*
+ * @mdtc is always NULL if !CGROUP_WRITEBACK but the
+ * compiler has no way to figure that out. Help it.
+ */
+ if (IS_ENABLED(CONFIG_CGROUP_WRITEBACK) && mdtc) {
+ domain_update_bandwidth(mdtc, now);
+ wb_update_dirty_ratelimit(mdtc, dirtied, elapsed);
+ }
}
- bdi_update_write_bandwidth(bdi, elapsed, written);
+ wb_update_write_bandwidth(wb, elapsed, written);
snapshot:
- bdi->dirtied_stamp = dirtied;
- bdi->written_stamp = written;
- bdi->bw_time_stamp = now;
+ wb->dirtied_stamp = dirtied;
+ wb->written_stamp = written;
+ wb->bw_time_stamp = now;
}
-static void bdi_update_bandwidth(struct backing_dev_info *bdi,
- unsigned long thresh,
- unsigned long bg_thresh,
- unsigned long dirty,
- unsigned long bdi_thresh,
- unsigned long bdi_dirty,
- unsigned long start_time)
+void wb_update_bandwidth(struct bdi_writeback *wb, unsigned long start_time)
{
- if (time_is_after_eq_jiffies(bdi->bw_time_stamp + BANDWIDTH_INTERVAL))
- return;
- spin_lock(&bdi->wb.list_lock);
- __bdi_update_bandwidth(bdi, thresh, bg_thresh, dirty,
- bdi_thresh, bdi_dirty, start_time);
- spin_unlock(&bdi->wb.list_lock);
+ struct dirty_throttle_control gdtc = { GDTC_INIT(wb) };
+
+ __wb_update_bandwidth(&gdtc, NULL, start_time, false);
}
/*
@@ -1203,10 +1382,10 @@ static unsigned long dirty_poll_interval(unsigned long dirty,
return 1;
}
-static unsigned long bdi_max_pause(struct backing_dev_info *bdi,
- unsigned long bdi_dirty)
+static unsigned long wb_max_pause(struct bdi_writeback *wb,
+ unsigned long wb_dirty)
{
- unsigned long bw = bdi->avg_write_bandwidth;
+ unsigned long bw = wb->avg_write_bandwidth;
unsigned long t;
/*
@@ -1216,20 +1395,20 @@ static unsigned long bdi_max_pause(struct backing_dev_info *bdi,
*
* 8 serves as the safety ratio.
*/
- t = bdi_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8));
+ t = wb_dirty / (1 + bw / roundup_pow_of_two(1 + HZ / 8));
t++;
return min_t(unsigned long, t, MAX_PAUSE);
}
-static long bdi_min_pause(struct backing_dev_info *bdi,
- long max_pause,
- unsigned long task_ratelimit,
- unsigned long dirty_ratelimit,
- int *nr_dirtied_pause)
+static long wb_min_pause(struct bdi_writeback *wb,
+ long max_pause,
+ unsigned long task_ratelimit,
+ unsigned long dirty_ratelimit,
+ int *nr_dirtied_pause)
{
- long hi = ilog2(bdi->avg_write_bandwidth);
- long lo = ilog2(bdi->dirty_ratelimit);
+ long hi = ilog2(wb->avg_write_bandwidth);
+ long lo = ilog2(wb->dirty_ratelimit);
long t; /* target pause */
long pause; /* estimated next pause */
int pages; /* target nr_dirtied_pause */
@@ -1297,34 +1476,27 @@ static long bdi_min_pause(struct backing_dev_info *bdi,
return pages >= DIRTY_POLL_THRESH ? 1 + t / 2 : t;
}
-static inline void bdi_dirty_limits(struct backing_dev_info *bdi,
- unsigned long dirty_thresh,
- unsigned long background_thresh,
- unsigned long *bdi_dirty,
- unsigned long *bdi_thresh,
- unsigned long *bdi_bg_thresh)
+static inline void wb_dirty_limits(struct dirty_throttle_control *dtc)
{
- unsigned long bdi_reclaimable;
+ struct bdi_writeback *wb = dtc->wb;
+ unsigned long wb_reclaimable;
/*
- * bdi_thresh is not treated as some limiting factor as
+ * wb_thresh is not treated as some limiting factor as
* dirty_thresh, due to reasons
- * - in JBOD setup, bdi_thresh can fluctuate a lot
+ * - in JBOD setup, wb_thresh can fluctuate a lot
* - in a system with HDD and USB key, the USB key may somehow
- * go into state (bdi_dirty >> bdi_thresh) either because
- * bdi_dirty starts high, or because bdi_thresh drops low.
+ * go into state (wb_dirty >> wb_thresh) either because
+ * wb_dirty starts high, or because wb_thresh drops low.
* In this case we don't want to hard throttle the USB key
- * dirtiers for 100 seconds until bdi_dirty drops under
- * bdi_thresh. Instead the auxiliary bdi control line in
- * bdi_position_ratio() will let the dirtier task progress
- * at some rate <= (write_bw / 2) for bringing down bdi_dirty.
+ * dirtiers for 100 seconds until wb_dirty drops under
+ * wb_thresh. Instead the auxiliary wb control line in
+ * wb_position_ratio() will let the dirtier task progress
+ * at some rate <= (write_bw / 2) for bringing down wb_dirty.
*/
- *bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
-
- if (bdi_bg_thresh)
- *bdi_bg_thresh = dirty_thresh ? div_u64((u64)*bdi_thresh *
- background_thresh,
- dirty_thresh) : 0;
+ dtc->wb_thresh = __wb_calc_thresh(dtc);
+ dtc->wb_bg_thresh = dtc->thresh ?
+ div_u64((u64)dtc->wb_thresh * dtc->bg_thresh, dtc->thresh) : 0;
/*
* In order to avoid the stacked BDI deadlock we need
@@ -1336,14 +1508,12 @@ static inline void bdi_dirty_limits(struct backing_dev_info *bdi,
* actually dirty; with m+n sitting in the percpu
* deltas.
*/
- if (*bdi_thresh < 2 * bdi_stat_error(bdi)) {
- bdi_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
- *bdi_dirty = bdi_reclaimable +
- bdi_stat_sum(bdi, BDI_WRITEBACK);
+ if (dtc->wb_thresh < 2 * wb_stat_error(wb)) {
+ wb_reclaimable = wb_stat_sum(wb, WB_RECLAIMABLE);
+ dtc->wb_dirty = wb_reclaimable + wb_stat_sum(wb, WB_WRITEBACK);
} else {
- bdi_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
- *bdi_dirty = bdi_reclaimable +
- bdi_stat(bdi, BDI_WRITEBACK);
+ wb_reclaimable = wb_stat(wb, WB_RECLAIMABLE);
+ dtc->wb_dirty = wb_reclaimable + wb_stat(wb, WB_WRITEBACK);
}
}
@@ -1355,12 +1525,16 @@ static inline void bdi_dirty_limits(struct backing_dev_info *bdi,
* perform some writeout.
*/
static void balance_dirty_pages(struct address_space *mapping,
+ struct bdi_writeback *wb,
unsigned long pages_dirtied)
{
+ struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
+ struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
+ struct dirty_throttle_control * const gdtc = &gdtc_stor;
+ struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
+ &mdtc_stor : NULL;
+ struct dirty_throttle_control *sdtc;
unsigned long nr_reclaimable; /* = file_dirty + unstable_nfs */
- unsigned long nr_dirty; /* = file_dirty + writeback + unstable_nfs */
- unsigned long background_thresh;
- unsigned long dirty_thresh;
long period;
long pause;
long max_pause;
@@ -1369,18 +1543,14 @@ static void balance_dirty_pages(struct address_space *mapping,
bool dirty_exceeded = false;
unsigned long task_ratelimit;
unsigned long dirty_ratelimit;
- unsigned long pos_ratio;
- struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ struct backing_dev_info *bdi = wb->bdi;
bool strictlimit = bdi->capabilities & BDI_CAP_STRICTLIMIT;
unsigned long start_time = jiffies;
for (;;) {
unsigned long now = jiffies;
- unsigned long uninitialized_var(bdi_thresh);
- unsigned long thresh;
- unsigned long uninitialized_var(bdi_dirty);
- unsigned long dirty;
- unsigned long bg_thresh;
+ unsigned long dirty, thresh, bg_thresh;
+ unsigned long m_dirty, m_thresh, m_bg_thresh;
/*
* Unstable writes are a feature of certain networked
@@ -1390,65 +1560,127 @@ static void balance_dirty_pages(struct address_space *mapping,
*/
nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
- nr_dirty = nr_reclaimable + global_page_state(NR_WRITEBACK);
+ gdtc->avail = global_dirtyable_memory();
+ gdtc->dirty = nr_reclaimable + global_page_state(NR_WRITEBACK);
- global_dirty_limits(&background_thresh, &dirty_thresh);
+ domain_dirty_limits(gdtc);
if (unlikely(strictlimit)) {
- bdi_dirty_limits(bdi, dirty_thresh, background_thresh,
- &bdi_dirty, &bdi_thresh, &bg_thresh);
+ wb_dirty_limits(gdtc);
- dirty = bdi_dirty;
- thresh = bdi_thresh;
+ dirty = gdtc->wb_dirty;
+ thresh = gdtc->wb_thresh;
+ bg_thresh = gdtc->wb_bg_thresh;
} else {
- dirty = nr_dirty;
- thresh = dirty_thresh;
- bg_thresh = background_thresh;
+ dirty = gdtc->dirty;
+ thresh = gdtc->thresh;
+ bg_thresh = gdtc->bg_thresh;
+ }
+
+ if (mdtc) {
+ unsigned long writeback;
+
+ /*
+ * If @wb belongs to !root memcg, repeat the same
+ * basic calculations for the memcg domain.
+ */
+ mem_cgroup_wb_stats(wb, &mdtc->avail, &mdtc->dirty,
+ &writeback);
+ mdtc_cap_avail(mdtc);
+ mdtc->dirty += writeback;
+
+ domain_dirty_limits(mdtc);
+
+ if (unlikely(strictlimit)) {
+ wb_dirty_limits(mdtc);
+ m_dirty = mdtc->wb_dirty;
+ m_thresh = mdtc->wb_thresh;
+ m_bg_thresh = mdtc->wb_bg_thresh;
+ } else {
+ m_dirty = mdtc->dirty;
+ m_thresh = mdtc->thresh;
+ m_bg_thresh = mdtc->bg_thresh;
+ }
}
/*
* Throttle it only when the background writeback cannot
* catch-up. This avoids (excessively) small writeouts
- * when the bdi limits are ramping up in case of !strictlimit.
+ * when the wb limits are ramping up in case of !strictlimit.
*
- * In strictlimit case make decision based on the bdi counters
- * and limits. Small writeouts when the bdi limits are ramping
+ * In strictlimit case make decision based on the wb counters
+ * and limits. Small writeouts when the wb limits are ramping
* up are the price we consciously pay for strictlimit-ing.
+ *
+ * If memcg domain is in effect, @dirty should be under
+ * both global and memcg freerun ceilings.
*/
- if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh)) {
+ if (dirty <= dirty_freerun_ceiling(thresh, bg_thresh) &&
+ (!mdtc ||
+ m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh))) {
+ unsigned long intv = dirty_poll_interval(dirty, thresh);
+ unsigned long m_intv = ULONG_MAX;
+
current->dirty_paused_when = now;
current->nr_dirtied = 0;
- current->nr_dirtied_pause =
- dirty_poll_interval(dirty, thresh);
+ if (mdtc)
+ m_intv = dirty_poll_interval(m_dirty, m_thresh);
+ current->nr_dirtied_pause = min(intv, m_intv);
break;
}
- if (unlikely(!writeback_in_progress(bdi)))
- bdi_start_background_writeback(bdi);
+ if (unlikely(!writeback_in_progress(wb)))
+ wb_start_background_writeback(wb);
+ /*
+ * Calculate global domain's pos_ratio and select the
+ * global dtc by default.
+ */
if (!strictlimit)
- bdi_dirty_limits(bdi, dirty_thresh, background_thresh,
- &bdi_dirty, &bdi_thresh, NULL);
-
- dirty_exceeded = (bdi_dirty > bdi_thresh) &&
- ((nr_dirty > dirty_thresh) || strictlimit);
- if (dirty_exceeded && !bdi->dirty_exceeded)
- bdi->dirty_exceeded = 1;
-
- bdi_update_bandwidth(bdi, dirty_thresh, background_thresh,
- nr_dirty, bdi_thresh, bdi_dirty,
- start_time);
-
- dirty_ratelimit = bdi->dirty_ratelimit;
- pos_ratio = bdi_position_ratio(bdi, dirty_thresh,
- background_thresh, nr_dirty,
- bdi_thresh, bdi_dirty);
- task_ratelimit = ((u64)dirty_ratelimit * pos_ratio) >>
+ wb_dirty_limits(gdtc);
+
+ dirty_exceeded = (gdtc->wb_dirty > gdtc->wb_thresh) &&
+ ((gdtc->dirty > gdtc->thresh) || strictlimit);
+
+ wb_position_ratio(gdtc);
+ sdtc = gdtc;
+
+ if (mdtc) {
+ /*
+ * If memcg domain is in effect, calculate its
+ * pos_ratio. @wb should satisfy constraints from
+ * both global and memcg domains. Choose the one
+ * w/ lower pos_ratio.
+ */
+ if (!strictlimit)
+ wb_dirty_limits(mdtc);
+
+ dirty_exceeded |= (mdtc->wb_dirty > mdtc->wb_thresh) &&
+ ((mdtc->dirty > mdtc->thresh) || strictlimit);
+
+ wb_position_ratio(mdtc);
+ if (mdtc->pos_ratio < gdtc->pos_ratio)
+ sdtc = mdtc;
+ }
+
+ if (dirty_exceeded && !wb->dirty_exceeded)
+ wb->dirty_exceeded = 1;
+
+ if (time_is_before_jiffies(wb->bw_time_stamp +
+ BANDWIDTH_INTERVAL)) {
+ spin_lock(&wb->list_lock);
+ __wb_update_bandwidth(gdtc, mdtc, start_time, true);
+ spin_unlock(&wb->list_lock);
+ }
+
+ /* throttle according to the chosen dtc */
+ dirty_ratelimit = wb->dirty_ratelimit;
+ task_ratelimit = ((u64)dirty_ratelimit * sdtc->pos_ratio) >>
RATELIMIT_CALC_SHIFT;
- max_pause = bdi_max_pause(bdi, bdi_dirty);
- min_pause = bdi_min_pause(bdi, max_pause,
- task_ratelimit, dirty_ratelimit,
- &nr_dirtied_pause);
+ max_pause = wb_max_pause(wb, sdtc->wb_dirty);
+ min_pause = wb_min_pause(wb, max_pause,
+ task_ratelimit, dirty_ratelimit,
+ &nr_dirtied_pause);
if (unlikely(task_ratelimit == 0)) {
period = max_pause;
@@ -1468,11 +1700,11 @@ static void balance_dirty_pages(struct address_space *mapping,
*/
if (pause < min_pause) {
trace_balance_dirty_pages(bdi,
- dirty_thresh,
- background_thresh,
- nr_dirty,
- bdi_thresh,
- bdi_dirty,
+ sdtc->thresh,
+ sdtc->bg_thresh,
+ sdtc->dirty,
+ sdtc->wb_thresh,
+ sdtc->wb_dirty,
dirty_ratelimit,
task_ratelimit,
pages_dirtied,
@@ -1497,11 +1729,11 @@ static void balance_dirty_pages(struct address_space *mapping,
pause:
trace_balance_dirty_pages(bdi,
- dirty_thresh,
- background_thresh,
- nr_dirty,
- bdi_thresh,
- bdi_dirty,
+ sdtc->thresh,
+ sdtc->bg_thresh,
+ sdtc->dirty,
+ sdtc->wb_thresh,
+ sdtc->wb_dirty,
dirty_ratelimit,
task_ratelimit,
pages_dirtied,
@@ -1516,33 +1748,33 @@ pause:
current->nr_dirtied_pause = nr_dirtied_pause;
/*
- * This is typically equal to (nr_dirty < dirty_thresh) and can
- * also keep "1000+ dd on a slow USB stick" under control.
+ * This is typically equal to (dirty < thresh) and can also
+ * keep "1000+ dd on a slow USB stick" under control.
*/
if (task_ratelimit)
break;
/*
* In the case of an unresponding NFS server and the NFS dirty
- * pages exceeds dirty_thresh, give the other good bdi's a pipe
+ * pages exceeds dirty_thresh, give the other good wb's a pipe
* to go through, so that tasks on them still remain responsive.
*
* In theory 1 page is enough to keep the comsumer-producer
* pipe going: the flusher cleans 1 page => the task dirties 1
- * more page. However bdi_dirty has accounting errors. So use
- * the larger and more IO friendly bdi_stat_error.
+ * more page. However wb_dirty has accounting errors. So use
+ * the larger and more IO friendly wb_stat_error.
*/
- if (bdi_dirty <= bdi_stat_error(bdi))
+ if (sdtc->wb_dirty <= wb_stat_error(wb))
break;
if (fatal_signal_pending(current))
break;
}
- if (!dirty_exceeded && bdi->dirty_exceeded)
- bdi->dirty_exceeded = 0;
+ if (!dirty_exceeded && wb->dirty_exceeded)
+ wb->dirty_exceeded = 0;
- if (writeback_in_progress(bdi))
+ if (writeback_in_progress(wb))
return;
/*
@@ -1556,8 +1788,8 @@ pause:
if (laptop_mode)
return;
- if (nr_reclaimable > background_thresh)
- bdi_start_background_writeback(bdi);
+ if (nr_reclaimable > gdtc->bg_thresh)
+ wb_start_background_writeback(wb);
}
static DEFINE_PER_CPU(int, bdp_ratelimits);
@@ -1593,15 +1825,22 @@ DEFINE_PER_CPU(int, dirty_throttle_leaks) = 0;
*/
void balance_dirty_pages_ratelimited(struct address_space *mapping)
{
- struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ struct inode *inode = mapping->host;
+ struct backing_dev_info *bdi = inode_to_bdi(inode);
+ struct bdi_writeback *wb = NULL;
int ratelimit;
int *p;
if (!bdi_cap_account_dirty(bdi))
return;
+ if (inode_cgwb_enabled(inode))
+ wb = wb_get_create_current(bdi, GFP_KERNEL);
+ if (!wb)
+ wb = &bdi->wb;
+
ratelimit = current->nr_dirtied_pause;
- if (bdi->dirty_exceeded)
+ if (wb->dirty_exceeded)
ratelimit = min(ratelimit, 32 >> (PAGE_SHIFT - 10));
preempt_disable();
@@ -1633,10 +1872,59 @@ void balance_dirty_pages_ratelimited(struct address_space *mapping)
preempt_enable();
if (unlikely(current->nr_dirtied >= ratelimit))
- balance_dirty_pages(mapping, current->nr_dirtied);
+ balance_dirty_pages(mapping, wb, current->nr_dirtied);
+
+ wb_put(wb);
}
EXPORT_SYMBOL(balance_dirty_pages_ratelimited);
+/**
+ * wb_over_bg_thresh - does @wb need to be written back?
+ * @wb: bdi_writeback of interest
+ *
+ * Determines whether background writeback should keep writing @wb or it's
+ * clean enough. Returns %true if writeback should continue.
+ */
+bool wb_over_bg_thresh(struct bdi_writeback *wb)
+{
+ struct dirty_throttle_control gdtc_stor = { GDTC_INIT(wb) };
+ struct dirty_throttle_control mdtc_stor = { MDTC_INIT(wb, &gdtc_stor) };
+ struct dirty_throttle_control * const gdtc = &gdtc_stor;
+ struct dirty_throttle_control * const mdtc = mdtc_valid(&mdtc_stor) ?
+ &mdtc_stor : NULL;
+
+ /*
+ * Similar to balance_dirty_pages() but ignores pages being written
+ * as we're trying to decide whether to put more under writeback.
+ */
+ gdtc->avail = global_dirtyable_memory();
+ gdtc->dirty = global_page_state(NR_FILE_DIRTY) +
+ global_page_state(NR_UNSTABLE_NFS);
+ domain_dirty_limits(gdtc);
+
+ if (gdtc->dirty > gdtc->bg_thresh)
+ return true;
+
+ if (wb_stat(wb, WB_RECLAIMABLE) > __wb_calc_thresh(gdtc))
+ return true;
+
+ if (mdtc) {
+ unsigned long writeback;
+
+ mem_cgroup_wb_stats(wb, &mdtc->avail, &mdtc->dirty, &writeback);
+ mdtc_cap_avail(mdtc);
+ domain_dirty_limits(mdtc); /* ditto, ignore writeback */
+
+ if (mdtc->dirty > mdtc->bg_thresh)
+ return true;
+
+ if (wb_stat(wb, WB_RECLAIMABLE) > __wb_calc_thresh(mdtc))
+ return true;
+ }
+
+ return false;
+}
+
void throttle_vm_writeout(gfp_t gfp_mask)
{
unsigned long background_thresh;
@@ -1644,7 +1932,7 @@ void throttle_vm_writeout(gfp_t gfp_mask)
for ( ; ; ) {
global_dirty_limits(&background_thresh, &dirty_thresh);
- dirty_thresh = hard_dirty_limit(dirty_thresh);
+ dirty_thresh = hard_dirty_limit(&global_wb_domain, dirty_thresh);
/*
* Boost the allowable dirty threshold a bit for page
@@ -1683,14 +1971,20 @@ void laptop_mode_timer_fn(unsigned long data)
struct request_queue *q = (struct request_queue *)data;
int nr_pages = global_page_state(NR_FILE_DIRTY) +
global_page_state(NR_UNSTABLE_NFS);
+ struct bdi_writeback *wb;
+ struct wb_iter iter;
/*
* We want to write everything out, not just down to the dirty
* threshold
*/
- if (bdi_has_dirty_io(&q->backing_dev_info))
- bdi_start_writeback(&q->backing_dev_info, nr_pages,
- WB_REASON_LAPTOP_TIMER);
+ if (!bdi_has_dirty_io(&q->backing_dev_info))
+ return;
+
+ bdi_for_each_wb(wb, &q->backing_dev_info, &iter, 0)
+ if (wb_has_dirty_io(wb))
+ wb_start_writeback(wb, nr_pages, true,
+ WB_REASON_LAPTOP_TIMER);
}
/*
@@ -1734,10 +2028,12 @@ void laptop_sync_completion(void)
void writeback_set_ratelimit(void)
{
+ struct wb_domain *dom = &global_wb_domain;
unsigned long background_thresh;
unsigned long dirty_thresh;
+
global_dirty_limits(&background_thresh, &dirty_thresh);
- global_dirty_limit = dirty_thresh;
+ dom->dirty_limit = dirty_thresh;
ratelimit_pages = dirty_thresh / (num_online_cpus() * 32);
if (ratelimit_pages < 16)
ratelimit_pages = 16;
@@ -1783,10 +2079,10 @@ static struct notifier_block ratelimit_nb = {
*/
void __init page_writeback_init(void)
{
+ BUG_ON(wb_domain_init(&global_wb_domain, GFP_KERNEL));
+
writeback_set_ratelimit();
register_cpu_notifier(&ratelimit_nb);
-
- fprop_global_init(&writeout_completions, GFP_KERNEL);
}
/**
@@ -2106,19 +2402,29 @@ int __set_page_dirty_no_writeback(struct page *page)
/*
* Helper function for set_page_dirty family.
+ *
+ * Caller must hold mem_cgroup_begin_page_stat().
+ *
* NOTE: This relies on being atomic wrt interrupts.
*/
-void account_page_dirtied(struct page *page, struct address_space *mapping)
+void account_page_dirtied(struct page *page, struct address_space *mapping,
+ struct mem_cgroup *memcg)
{
+ struct inode *inode = mapping->host;
+
trace_writeback_dirty_page(page, mapping);
if (mapping_cap_account_dirty(mapping)) {
- struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ struct bdi_writeback *wb;
+
+ inode_attach_wb(inode, page);
+ wb = inode_to_wb(inode);
+ mem_cgroup_inc_page_stat(memcg, MEM_CGROUP_STAT_DIRTY);
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_zone_page_state(page, NR_DIRTIED);
- __inc_bdi_stat(bdi, BDI_RECLAIMABLE);
- __inc_bdi_stat(bdi, BDI_DIRTIED);
+ __inc_wb_stat(wb, WB_RECLAIMABLE);
+ __inc_wb_stat(wb, WB_DIRTIED);
task_io_account_write(PAGE_CACHE_SIZE);
current->nr_dirtied++;
this_cpu_inc(bdp_ratelimits);
@@ -2129,21 +2435,18 @@ EXPORT_SYMBOL(account_page_dirtied);
/*
* Helper function for deaccounting dirty page without writeback.
*
- * Doing this should *normally* only ever be done when a page
- * is truncated, and is not actually mapped anywhere at all. However,
- * fs/buffer.c does this when it notices that somebody has cleaned
- * out all the buffers on a page without actually doing it through
- * the VM. Can you say "ext3 is horribly ugly"? Thought you could.
+ * Caller must hold mem_cgroup_begin_page_stat().
*/
-void account_page_cleaned(struct page *page, struct address_space *mapping)
+void account_page_cleaned(struct page *page, struct address_space *mapping,
+ struct mem_cgroup *memcg, struct bdi_writeback *wb)
{
if (mapping_cap_account_dirty(mapping)) {
+ mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_DIRTY);
dec_zone_page_state(page, NR_FILE_DIRTY);
- dec_bdi_stat(inode_to_bdi(mapping->host), BDI_RECLAIMABLE);
+ dec_wb_stat(wb, WB_RECLAIMABLE);
task_io_account_cancelled_write(PAGE_CACHE_SIZE);
}
}
-EXPORT_SYMBOL(account_page_cleaned);
/*
* For address_spaces which do not use buffers. Just tag the page as dirty in
@@ -2159,26 +2462,34 @@ EXPORT_SYMBOL(account_page_cleaned);
*/
int __set_page_dirty_nobuffers(struct page *page)
{
+ struct mem_cgroup *memcg;
+
+ memcg = mem_cgroup_begin_page_stat(page);
if (!TestSetPageDirty(page)) {
struct address_space *mapping = page_mapping(page);
unsigned long flags;
- if (!mapping)
+ if (!mapping) {
+ mem_cgroup_end_page_stat(memcg);
return 1;
+ }
spin_lock_irqsave(&mapping->tree_lock, flags);
BUG_ON(page_mapping(page) != mapping);
WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
- account_page_dirtied(page, mapping);
+ account_page_dirtied(page, mapping, memcg);
radix_tree_tag_set(&mapping->page_tree, page_index(page),
PAGECACHE_TAG_DIRTY);
spin_unlock_irqrestore(&mapping->tree_lock, flags);
+ mem_cgroup_end_page_stat(memcg);
+
if (mapping->host) {
/* !PageAnon && !swapper_space */
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
return 1;
}
+ mem_cgroup_end_page_stat(memcg);
return 0;
}
EXPORT_SYMBOL(__set_page_dirty_nobuffers);
@@ -2193,10 +2504,17 @@ EXPORT_SYMBOL(__set_page_dirty_nobuffers);
void account_page_redirty(struct page *page)
{
struct address_space *mapping = page->mapping;
+
if (mapping && mapping_cap_account_dirty(mapping)) {
+ struct inode *inode = mapping->host;
+ struct bdi_writeback *wb;
+ bool locked;
+
+ wb = unlocked_inode_to_wb_begin(inode, &locked);
current->nr_dirtied--;
dec_zone_page_state(page, NR_DIRTIED);
- dec_bdi_stat(inode_to_bdi(mapping->host), BDI_DIRTIED);
+ dec_wb_stat(wb, WB_DIRTIED);
+ unlocked_inode_to_wb_end(inode, locked);
}
}
EXPORT_SYMBOL(account_page_redirty);
@@ -2282,6 +2600,43 @@ int set_page_dirty_lock(struct page *page)
EXPORT_SYMBOL(set_page_dirty_lock);
/*
+ * This cancels just the dirty bit on the kernel page itself, it does NOT
+ * actually remove dirty bits on any mmap's that may be around. It also
+ * leaves the page tagged dirty, so any sync activity will still find it on
+ * the dirty lists, and in particular, clear_page_dirty_for_io() will still
+ * look at the dirty bits in the VM.
+ *
+ * Doing this should *normally* only ever be done when a page is truncated,
+ * and is not actually mapped anywhere at all. However, fs/buffer.c does
+ * this when it notices that somebody has cleaned out all the buffers on a
+ * page without actually doing it through the VM. Can you say "ext3 is
+ * horribly ugly"? Thought you could.
+ */
+void cancel_dirty_page(struct page *page)
+{
+ struct address_space *mapping = page_mapping(page);
+
+ if (mapping_cap_account_dirty(mapping)) {
+ struct inode *inode = mapping->host;
+ struct bdi_writeback *wb;
+ struct mem_cgroup *memcg;
+ bool locked;
+
+ memcg = mem_cgroup_begin_page_stat(page);
+ wb = unlocked_inode_to_wb_begin(inode, &locked);
+
+ if (TestClearPageDirty(page))
+ account_page_cleaned(page, mapping, memcg, wb);
+
+ unlocked_inode_to_wb_end(inode, locked);
+ mem_cgroup_end_page_stat(memcg);
+ } else {
+ ClearPageDirty(page);
+ }
+}
+EXPORT_SYMBOL(cancel_dirty_page);
+
+/*
* Clear a page's dirty flag, while caring for dirty memory accounting.
* Returns true if the page was previously dirty.
*
@@ -2298,10 +2653,16 @@ EXPORT_SYMBOL(set_page_dirty_lock);
int clear_page_dirty_for_io(struct page *page)
{
struct address_space *mapping = page_mapping(page);
+ int ret = 0;
BUG_ON(!PageLocked(page));
if (mapping && mapping_cap_account_dirty(mapping)) {
+ struct inode *inode = mapping->host;
+ struct bdi_writeback *wb;
+ struct mem_cgroup *memcg;
+ bool locked;
+
/*
* Yes, Virginia, this is indeed insane.
*
@@ -2337,13 +2698,17 @@ int clear_page_dirty_for_io(struct page *page)
* always locked coming in here, so we get the desired
* exclusion.
*/
+ memcg = mem_cgroup_begin_page_stat(page);
+ wb = unlocked_inode_to_wb_begin(inode, &locked);
if (TestClearPageDirty(page)) {
+ mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_DIRTY);
dec_zone_page_state(page, NR_FILE_DIRTY);
- dec_bdi_stat(inode_to_bdi(mapping->host),
- BDI_RECLAIMABLE);
- return 1;
+ dec_wb_stat(wb, WB_RECLAIMABLE);
+ ret = 1;
}
- return 0;
+ unlocked_inode_to_wb_end(inode, locked);
+ mem_cgroup_end_page_stat(memcg);
+ return ret;
}
return TestClearPageDirty(page);
}
@@ -2357,7 +2722,8 @@ int test_clear_page_writeback(struct page *page)
memcg = mem_cgroup_begin_page_stat(page);
if (mapping) {
- struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ struct inode *inode = mapping->host;
+ struct backing_dev_info *bdi = inode_to_bdi(inode);
unsigned long flags;
spin_lock_irqsave(&mapping->tree_lock, flags);
@@ -2367,8 +2733,10 @@ int test_clear_page_writeback(struct page *page)
page_index(page),
PAGECACHE_TAG_WRITEBACK);
if (bdi_cap_account_writeback(bdi)) {
- __dec_bdi_stat(bdi, BDI_WRITEBACK);
- __bdi_writeout_inc(bdi);
+ struct bdi_writeback *wb = inode_to_wb(inode);
+
+ __dec_wb_stat(wb, WB_WRITEBACK);
+ __wb_writeout_inc(wb);
}
}
spin_unlock_irqrestore(&mapping->tree_lock, flags);
@@ -2392,7 +2760,8 @@ int __test_set_page_writeback(struct page *page, bool keep_write)
memcg = mem_cgroup_begin_page_stat(page);
if (mapping) {
- struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
+ struct inode *inode = mapping->host;
+ struct backing_dev_info *bdi = inode_to_bdi(inode);
unsigned long flags;
spin_lock_irqsave(&mapping->tree_lock, flags);
@@ -2402,7 +2771,7 @@ int __test_set_page_writeback(struct page *page, bool keep_write)
page_index(page),
PAGECACHE_TAG_WRITEBACK);
if (bdi_cap_account_writeback(bdi))
- __inc_bdi_stat(bdi, BDI_WRITEBACK);
+ __inc_wb_stat(inode_to_wb(inode), WB_WRITEBACK);
}
if (!PageDirty(page))
radix_tree_tag_clear(&mapping->page_tree,