summaryrefslogtreecommitdiff
path: root/net/ipv6/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'net/ipv6/Kconfig')
-rw-r--r--net/ipv6/Kconfig261
1 files changed, 261 insertions, 0 deletions
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
new file mode 100644
index 000000000..438a73aa7
--- /dev/null
+++ b/net/ipv6/Kconfig
@@ -0,0 +1,261 @@
+#
+# IPv6 configuration
+#
+
+# IPv6 as module will cause a CRASH if you try to unload it
+menuconfig IPV6
+ tristate "The IPv6 protocol"
+ default m
+ ---help---
+ This is complemental support for the IP version 6.
+ You will still be able to do traditional IPv4 networking as well.
+
+ For general information about IPv6, see
+ <https://en.wikipedia.org/wiki/IPv6>.
+ For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
+ For specific information about IPv6 under Linux, read the HOWTO at
+ <http://www.bieringer.de/linux/IPv6/>.
+
+ To compile this protocol support as a module, choose M here: the
+ module will be called ipv6.
+
+if IPV6
+
+config IPV6_ROUTER_PREF
+ bool "IPv6: Router Preference (RFC 4191) support"
+ ---help---
+ Router Preference is an optional extension to the Router
+ Advertisement message which improves the ability of hosts
+ to pick an appropriate router, especially when the hosts
+ are placed in a multi-homed network.
+
+ If unsure, say N.
+
+config IPV6_ROUTE_INFO
+ bool "IPv6: Route Information (RFC 4191) support"
+ depends on IPV6_ROUTER_PREF
+ ---help---
+ This is experimental support of Route Information.
+
+ If unsure, say N.
+
+config IPV6_OPTIMISTIC_DAD
+ bool "IPv6: Enable RFC 4429 Optimistic DAD"
+ ---help---
+ This is experimental support for optimistic Duplicate
+ Address Detection. It allows for autoconfigured addresses
+ to be used more quickly.
+
+ If unsure, say N.
+
+config INET6_AH
+ tristate "IPv6: AH transformation"
+ select XFRM_ALGO
+ select CRYPTO
+ select CRYPTO_HMAC
+ select CRYPTO_MD5
+ select CRYPTO_SHA1
+ ---help---
+ Support for IPsec AH.
+
+ If unsure, say Y.
+
+config INET6_ESP
+ tristate "IPv6: ESP transformation"
+ select XFRM_ALGO
+ select CRYPTO
+ select CRYPTO_AUTHENC
+ select CRYPTO_HMAC
+ select CRYPTO_MD5
+ select CRYPTO_CBC
+ select CRYPTO_SHA1
+ select CRYPTO_DES
+ ---help---
+ Support for IPsec ESP.
+
+ If unsure, say Y.
+
+config INET6_IPCOMP
+ tristate "IPv6: IPComp transformation"
+ select INET6_XFRM_TUNNEL
+ select XFRM_IPCOMP
+ ---help---
+ Support for IP Payload Compression Protocol (IPComp) (RFC3173),
+ typically needed for IPsec.
+
+ If unsure, say Y.
+
+config IPV6_MIP6
+ tristate "IPv6: Mobility"
+ select XFRM
+ ---help---
+ Support for IPv6 Mobility described in RFC 3775.
+
+ If unsure, say N.
+
+config INET6_XFRM_TUNNEL
+ tristate
+ select INET6_TUNNEL
+ default n
+
+config INET6_TUNNEL
+ tristate
+ default n
+
+config INET6_XFRM_MODE_TRANSPORT
+ tristate "IPv6: IPsec transport mode"
+ default IPV6
+ select XFRM
+ ---help---
+ Support for IPsec transport mode.
+
+ If unsure, say Y.
+
+config INET6_XFRM_MODE_TUNNEL
+ tristate "IPv6: IPsec tunnel mode"
+ default IPV6
+ select XFRM
+ ---help---
+ Support for IPsec tunnel mode.
+
+ If unsure, say Y.
+
+config INET6_XFRM_MODE_BEET
+ tristate "IPv6: IPsec BEET mode"
+ default IPV6
+ select XFRM
+ ---help---
+ Support for IPsec BEET mode.
+
+ If unsure, say Y.
+
+config INET6_XFRM_MODE_ROUTEOPTIMIZATION
+ tristate "IPv6: MIPv6 route optimization mode"
+ select XFRM
+ ---help---
+ Support for MIPv6 route optimization mode.
+
+config IPV6_VTI
+tristate "Virtual (secure) IPv6: tunneling"
+ select IPV6_TUNNEL
+ select NET_IP_TUNNEL
+ depends on INET6_XFRM_MODE_TUNNEL
+ ---help---
+ Tunneling means encapsulating data of one protocol type within
+ another protocol and sending it over a channel that understands the
+ encapsulating protocol. This can be used with xfrm mode tunnel to give
+ the notion of a secure tunnel for IPSEC and then use routing protocol
+ on top.
+
+config IPV6_SIT
+ tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)"
+ select INET_TUNNEL
+ select NET_IP_TUNNEL
+ select IPV6_NDISC_NODETYPE
+ default y
+ ---help---
+ Tunneling means encapsulating data of one protocol type within
+ another protocol and sending it over a channel that understands the
+ encapsulating protocol. This driver implements encapsulation of IPv6
+ into IPv4 packets. This is useful if you want to connect two IPv6
+ networks over an IPv4-only path.
+
+ Saying M here will produce a module called sit. If unsure, say Y.
+
+config IPV6_SIT_6RD
+ bool "IPv6: IPv6 Rapid Deployment (6RD)"
+ depends on IPV6_SIT
+ default n
+ ---help---
+ IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon
+ mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly
+ deploy IPv6 unicast service to IPv4 sites to which it provides
+ customer premise equipment. Like 6to4, it utilizes stateless IPv6 in
+ IPv4 encapsulation in order to transit IPv4-only network
+ infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6
+ prefix of its own in place of the fixed 6to4 prefix.
+
+ With this option enabled, the SIT driver offers 6rd functionality by
+ providing additional ioctl API to configure the IPv6 Prefix for in
+ stead of static 2002::/16 for 6to4.
+
+ If unsure, say N.
+
+config IPV6_NDISC_NODETYPE
+ bool
+
+config IPV6_TUNNEL
+ tristate "IPv6: IP-in-IPv6 tunnel (RFC2473)"
+ select INET6_TUNNEL
+ ---help---
+ Support for IPv6-in-IPv6 and IPv4-in-IPv6 tunnels described in
+ RFC 2473.
+
+ If unsure, say N.
+
+config IPV6_GRE
+ tristate "IPv6: GRE tunnel"
+ select IPV6_TUNNEL
+ select NET_IP_TUNNEL
+ ---help---
+ Tunneling means encapsulating data of one protocol type within
+ another protocol and sending it over a channel that understands the
+ encapsulating protocol. This particular tunneling driver implements
+ GRE (Generic Routing Encapsulation) and at this time allows
+ encapsulating of IPv4 or IPv6 over existing IPv6 infrastructure.
+ This driver is useful if the other endpoint is a Cisco router: Cisco
+ likes GRE much better than the other Linux tunneling driver ("IP
+ tunneling" above). In addition, GRE allows multicast redistribution
+ through the tunnel.
+
+ Saying M here will produce a module called ip6_gre. If unsure, say N.
+
+config IPV6_MULTIPLE_TABLES
+ bool "IPv6: Multiple Routing Tables"
+ select FIB_RULES
+ ---help---
+ Support multiple routing tables.
+
+config IPV6_SUBTREES
+ bool "IPv6: source address based routing"
+ depends on IPV6_MULTIPLE_TABLES
+ ---help---
+ Enable routing by source address or prefix.
+
+ The destination address is still the primary routing key, so mixing
+ normal and source prefix specific routes in the same routing table
+ may sometimes lead to unintended routing behavior. This can be
+ avoided by defining different routing tables for the normal and
+ source prefix specific routes.
+
+ If unsure, say N.
+
+config IPV6_MROUTE
+ bool "IPv6: multicast routing"
+ depends on IPV6
+ ---help---
+ Experimental support for IPv6 multicast forwarding.
+ If unsure, say N.
+
+config IPV6_MROUTE_MULTIPLE_TABLES
+ bool "IPv6: multicast policy routing"
+ depends on IPV6_MROUTE
+ select FIB_RULES
+ help
+ Normally, a multicast router runs a userspace daemon and decides
+ what to do with a multicast packet based on the source and
+ destination addresses. If you say Y here, the multicast router
+ will also be able to take interfaces and packet marks into
+ account and run multiple instances of userspace daemons
+ simultaneously, each one handling a single table.
+
+ If unsure, say N.
+
+config IPV6_PIMSM_V2
+ bool "IPv6: PIM-SM version 2 support"
+ depends on IPV6_MROUTE
+ ---help---
+ Support for IPv6 PIM multicast routing protocol PIM-SMv2.
+ If unsure, say N.
+
+endif # IPV6