1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
* General Purpose Input Output (GPIO) bus.
Properties:
- compatible: "cavium,octeon-3860-gpio"
Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
- reg: The base address of the GPIO unit's register bank.
- gpio-controller: This is a GPIO controller.
- #gpio-cells: Must be <2>. The first cell is the GPIO pin.
- interrupt-controller: The GPIO controller is also an interrupt
controller, many of its pins may be configured as an interrupt
source.
- #interrupt-cells: Must be <2>. The first cell is the GPIO pin
connected to the interrupt source. The second cell is the interrupt
triggering protocol and may have one of four values:
1 - edge triggered on the rising edge.
2 - edge triggered on the falling edge
4 - level triggered active high.
8 - level triggered active low.
- interrupts: Interrupt routing for each pin.
Example:
gpio-controller@1070000000800 {
#gpio-cells = <2>;
compatible = "cavium,octeon-3860-gpio";
reg = <0x10700 0x00000800 0x0 0x100>;
gpio-controller;
/* Interrupts are specified by two parts:
* 1) GPIO pin number (0..15)
* 2) Triggering (1 - edge rising
* 2 - edge falling
* 4 - level active high
* 8 - level active low)
*/
interrupt-controller;
#interrupt-cells = <2>;
/* The GPIO pin connect to 16 consecutive CUI bits */
interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
<0 20>, <0 21>, <0 22>, <0 23>,
<0 24>, <0 25>, <0 26>, <0 27>,
<0 28>, <0 29>, <0 30>, <0 31>;
};
|
