1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
|
* Marvell PXA Keypad controller
Required Properties
- compatible : should be "marvell,pxa27x-keypad"
- reg : Address and length of the register set for the device
- interrupts : The interrupt for the keypad controller
- marvell,debounce-interval : How long time the key will be
recognized when it is pressed. It is a u32 value, and bit[31:16]
is debounce interval for direct key and bit[15:0] is debounce
interval for matrix key. The value is in binary number of 2ms
Optional Properties For Matrix Keyes
Please refer to matrix-keymap.txt
Optional Properties for Direct Keyes
- marvell,direct-key-count : How many direct keyes are used.
- marvell,direct-key-mask : The mask indicates which keyes
are used. If bit[X] of the mask is set, the direct key X
is used.
- marvell,direct-key-low-active : Direct key status register
tells the level of pins that connects to the direct keyes.
When this property is set, it means that when the pin level
is low, the key is pressed(active).
- marvell,direct-key-map : It is a u16 array. Each item indicates
the linux key-code for the direct key.
Optional Properties For Rotary
- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
linux key-code for rotary up. Bit[15:0] is the linux key-code
for rotary down. It is for rotary 0.
- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
- marvell,rotary-rel-key : When rotary is used for relative axes
in the device, the value indicates the key-code for relative
axes measurement in the device. It is a u32 value. Bit[31:16]
is for rotary 1, and Bit[15:0] is for rotary 0.
Examples:
keypad: keypad@d4012000 {
keypad,num-rows = <3>;
keypad,num-columns = <5>;
linux,keymap = <0x0000000e /* KEY_BACKSPACE */
0x0001006b /* KEY_END */
0x00020061 /* KEY_RIGHTCTRL */
0x0003000b /* KEY_0 */
0x00040002 /* KEY_1 */
0x0100008b /* KEY_MENU */
0x01010066 /* KEY_HOME */
0x010200e7 /* KEY_SEND */
0x01030009 /* KEY_8 */
0x0104000a /* KEY_9 */
0x02000160 /* KEY_OK */
0x02010003 /* KEY_2 */
0x02020004 /* KEY_3 */
0x02030005 /* KEY_4 */
0x02040006>; /* KEY_5 */
marvell,rotary0 = <0x006c0067>; /* KEY_UP & KEY_DOWN */
marvell,direct-key-count = <1>;
marvell,direct-key-map = <0x001c>;
marvell,debounce-interval = <0x001e001e>;
};
|
