man: typo fixes

A mix of fixes for typos and UK english

13 files changed, 19 insertions, 19 deletions

diff --git a/man/logind.conf.xml b/man/logind.conf.xml
index 9b0e181849..994e0e1140 100644
--- a/man/logind.conf.xml
+++ b/man/logind.conf.xml
@@ -261,7 +261,7 @@
         <listitem><para>Controls whether actions that <command>systemd-logind</command>
         takes when the power and sleep keys and the lid switch are triggered are subject
         to high-level inhibitor locks ("shutdown", "sleep", "idle"). Low level inhibitor
-        locks ("handle-*-key"), are always honoured, irrespective of this setting.</para>
+        locks ("handle-*-key"), are always honored, irrespective of this setting.</para>
 
         <para>These settings take boolean arguments. If <literal>no</literal>, the
         inhibitor locks taken by applications are respected. If <literal>yes</literal>,
diff --git a/man/sd-event.xml b/man/sd-event.xml
index fc615f0906..24a69bb645 100644
--- a/man/sd-event.xml
+++ b/man/sd-event.xml
@@ -97,7 +97,7 @@
     iteration a single event source is dispatched. Each time an event
     source is dispatched the kernel is polled for new events, before
     the next event source is dispatched. The event loop is designed to
-    honour priorities and provide fairness within each priority. It is
+    honor priorities and provide fairness within each priority. It is
     not designed to provide optimal throughput, as this contradicts
     these goals due the limitations of the underlying <citerefentry
     project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry>
diff --git a/man/sd_event_source_set_priority.xml b/man/sd_event_source_set_priority.xml
index 8c9b39fe5e..6e7032fc80 100644
--- a/man/sd_event_source_set_priority.xml
+++ b/man/sd_event_source_set_priority.xml
@@ -115,7 +115,7 @@
     reliable. However, it is guaranteed that if events are seen on
     multiple same-priority event sources at the same time, each one is
     not dispatched again until all others have been dispatched
-    once. This behaviour guarantees that within each priority
+    once. This behavior guarantees that within each priority
     particular event sources do not starve or dominate the event
     loop.</para>
 
diff --git a/man/systemctl.xml b/man/systemctl.xml
index 3b883ea754..b51badf7fe 100644
--- a/man/systemctl.xml
+++ b/man/systemctl.xml
@@ -306,7 +306,7 @@
         <para><literal>ignore-requirements</literal> is similar to
         <literal>ignore-dependencies</literal>, but only causes the
         requirement dependencies to be ignored, the ordering
-        dependencies will still be honoured.</para>
+        dependencies will still be honored.</para>
         </listitem>
 
       </varlistentry>
@@ -1006,7 +1006,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
             desired, combine this command with the <option>--now</option> switch, or invoke <command>start</command>
             with appropriate arguments later. Note that in case of unit instance enablement (i.e. enablement of units of
             the form <filename>foo@bar.service</filename>), symlinks named the same as instances are created in the
-            unit configuration diectory, however they point to the single template unit file they are instantiated
+            unit configuration directory, however they point to the single template unit file they are instantiated
             from.</para>
 
             <para>This command expects either valid unit names (in which case various unit file directories are
diff --git a/man/systemd-coredump.xml b/man/systemd-coredump.xml
index a28dc62e5a..4a1bc8b296 100644
--- a/man/systemd-coredump.xml
+++ b/man/systemd-coredump.xml
@@ -107,7 +107,7 @@
     <citerefentry><refentrytitle>systemd-sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
     </para>
 
-    <para>The behaviour of <command>systemd-coredump</command> itself is configured through the configuration file
+    <para>The behavior of <command>systemd-coredump</command> itself is configured through the configuration file
     <filename>/etc/systemd/coredump.conf</filename> and corresponding snippets
     <filename>/etc/systemd/coredump.conf.d/*.conf</filename>, see
     <citerefentry><refentrytitle>coredump.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. A new
diff --git a/man/systemd-mount.xml b/man/systemd-mount.xml
index e6c07863c0..06b7c85bd8 100644
--- a/man/systemd-mount.xml
+++ b/man/systemd-mount.xml
@@ -260,7 +260,7 @@
   <refsect1>
     <title>The udev Database</title>
 
-    <para>If <option>--discover</option> is used, <command>systemd-mount</command> honours a couple of additional udev
+    <para>If <option>--discover</option> is used, <command>systemd-mount</command> honors a couple of additional udev
     properties of block devices:</para>
 
     <variablelist class='udev-directives'>
diff --git a/man/systemd-nspawn.xml b/man/systemd-nspawn.xml
index 5ac54df81a..f153034296 100644
--- a/man/systemd-nspawn.xml
+++ b/man/systemd-nspawn.xml
@@ -405,7 +405,7 @@
         purposes (usually in the range beyond the host's UID/GID 65536). The parameter may be specified as follows:</para>
 
         <orderedlist>
-          <listitem><para>If one or two colon-separated numers are specified, user namespacing is turned on. The first
+          <listitem><para>If one or two colon-separated numbers are specified, user namespacing is turned on. The first
           parameter specifies the first host UID/GID to assign to the container, the second parameter specifies the
           number of host UIDs/GIDs to assign to the container. If the second parameter is omitted, 65536 UIDs/GIDs are
           assigned.</para></listitem>
@@ -425,13 +425,13 @@
           range is automatically chosen. As first step, the file owner of the root directory of the container's
           directory tree is read, and it is checked that it is currently not used by the system otherwise (in
           particular, that no other container is using it). If this check is successful, the UID/GID range determined
-          this way is used, similar to the behaviour if "yes" is specified. If the check is not successful (and thus
+          this way is used, similar to the behavior if "yes" is specified. If the check is not successful (and thus
           the UID/GID range indicated in the root directory's file owner is already used elsewhere) a new – currently
           unused – UID/GID range of 65536 UIDs/GIDs is randomly chosen between the host UID/GIDs of 524288 and
           1878982656, always starting at a multiple of 65536. This setting implies
           <option>--private-users-chown</option> (see below), which has the effect that the files and directories in
           the container's directory tree will be owned by the appropriate users of the range picked. Using this option
-          makes user namespace behaviour fully automatic. Note that the first invocation of a previously unused
+          makes user namespace behavior fully automatic. Note that the first invocation of a previously unused
           container image might result in picking a new UID/GID range for it, and thus in the (possibly expensive) file
           ownership adjustment operation. However, subsequent invocations of the container will be cheap (unless of
           course the picked UID/GID range is assigned to a different use by then).</para></listitem>
@@ -440,7 +440,7 @@
         <para>It is recommended to assign at least 65536 UIDs/GIDs to each container, so that the usable UID/GID range in the
         container covers 16 bit. For best security, do not assign overlapping UID/GID ranges to multiple containers. It is
         hence a good idea to use the upper 16 bit of the host 32-bit UIDs/GIDs as container identifier, while the lower 16
-        bit encode the container UID/GID used. This is in fact the behaviour enforced by the
+        bit encode the container UID/GID used. This is in fact the behavior enforced by the
         <option>--private-users=pick</option> option.</para>
 
         <para>When user namespaces are used, the GID range assigned to each container is always chosen identical to the
@@ -722,7 +722,7 @@
         and the subdirectory is symlinked into the host at the same
         location. <literal>try-host</literal> and
         <literal>try-guest</literal> do the same but do not fail if
-        the host does not have persistent journalling enabled. If
+        the host does not have persistent journaling enabled. If
         <literal>auto</literal> (the default), and the right
         subdirectory of <filename>/var/log/journal</filename> exists,
         it will be bind mounted into the container. If the
diff --git a/man/systemd-run.xml b/man/systemd-run.xml
index 15f9119e54..2ad8cb0835 100644
--- a/man/systemd-run.xml
+++ b/man/systemd-run.xml
@@ -402,7 +402,7 @@ There is a screen on:
       when the user first logs in, and stays around as long as at least one
       login session is open. After the user logs out of the last session,
       <filename>user@.service</filename> and all services underneath it
-      are terminated. This behaviour is the default, when "lingering" is
+      are terminated. This behavior is the default, when "lingering" is
       not enabled for that user. Enabling lingering means that
       <filename>user@.service</filename> is started automatically during
       boot, even if the user is not logged in, and that the service is
diff --git a/man/systemd-system.conf.xml b/man/systemd-system.conf.xml
index a268397d09..1d995f143e 100644
--- a/man/systemd-system.conf.xml
+++ b/man/systemd-system.conf.xml
@@ -109,7 +109,7 @@
         <term><varname>CtrlAltDelBurstAction=</varname></term>
 
         <listitem><para>Defines what action will be performed
-        if user presses Ctr-Alt-Delete more than 7 times in 2s.
+        if user presses Ctrl-Alt-Delete more than 7 times in 2s.
         Can be set to <literal>reboot-force</literal>, <literal>poweroff-force</literal>
         or disabled with <literal>ignore</literal>. Defaults to
         <literal>reboot-force</literal>.
diff --git a/man/systemd.exec.xml b/man/systemd.exec.xml
index 986985ad35..c088042a51 100644
--- a/man/systemd.exec.xml
+++ b/man/systemd.exec.xml
@@ -988,7 +988,7 @@
         the unit's own user and group to themselves and everything else to the <literal>nobody</literal> user and
         group. This is useful to securely detach the user and group databases used by the unit from the rest of the
         system, and thus to create an effective sandbox environment. All files, directories, processes, IPC objects and
-        other resources owned by users/groups not equalling <literal>root</literal> or the unit's own will stay visible
+        other resources owned by users/groups not equaling <literal>root</literal> or the unit's own will stay visible
         from within the unit but appear owned by the <literal>nobody</literal> user and group. If this mode is enabled,
         all unit processes are run without privileges in the host user namespace (regardless if the unit's own
         user/group is <literal>root</literal> or not). Specifically this means that the process will have zero process
@@ -1560,7 +1560,7 @@
       <varlistentry>
         <term><varname>$MAINPID</varname></term>
 
-        <listitem><para>The PID of the units main process if it is
+        <listitem><para>The PID of the unit's main process if it is
         known. This is only set for control processes as invoked by
         <varname>ExecReload=</varname> and similar. </para></listitem>
       </varlistentry>
diff --git a/man/systemd.link.xml b/man/systemd.link.xml
index 10fddeced0..8edbe758d9 100644
--- a/man/systemd.link.xml
+++ b/man/systemd.link.xml
@@ -107,7 +107,7 @@
         <listitem>
           <para>A whitespace-separated list of shell-style globs matching
           the device name, as exposed by the udev property
-          "INTERFACE". This can not be used to match on names that have
+          "INTERFACE". This cannot be used to match on names that have
           already been changed from userspace. Caution is advised when matching on
           kernel-assigned names, as they are known to be unstable
           between reboots.</para>
diff --git a/man/systemd.socket.xml b/man/systemd.socket.xml
index d759e17289..0ce1203cfb 100644
--- a/man/systemd.socket.xml
+++ b/man/systemd.socket.xml
@@ -535,7 +535,7 @@
         and the kernel will ignore initial ACK packets without any
         data. The argument specifies the approximate amount of time
         the kernel should wait for incoming data before falling back
-        to the normal behavior of honouring empty ACK packets. This
+        to the normal behavior of honoring empty ACK packets. This
         option is beneficial for protocols where the client sends the
         data first (e.g. HTTP, in contrast to SMTP), because the
         server process will not be woken up unnecessarily before it
diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml
index 9778283fec..79bdb2cd38 100644
--- a/man/systemd.unit.xml
+++ b/man/systemd.unit.xml
@@ -195,7 +195,7 @@
     instantiated units, this logic will first look for the instance <literal>.d/</literal>
     subdirectory and read its <literal>.conf</literal> files, followed by the template
     <literal>.d/</literal> subdirectory and the <literal>.conf</literal> files there. Also note that
-    settings from the <literal>[Install]</literal> section are not honoured in drop-in unit files,
+    settings from the <literal>[Install]</literal> section are not honored in drop-in unit files,
     and have no effect.</para>
 
     <para>In addition to <filename>/etc/systemd/system</filename>, the drop-in <literal>.d</literal>