./tools/notsd-move

1 files changed, 1021 insertions, 0 deletions

diff --git a/src/grp-machine/machinectl/machinectl.xml b/src/grp-machine/machinectl/machinectl.xml
new file mode 100644
index 0000000000..597a5cc583
--- /dev/null
+++ b/src/grp-machine/machinectl/machinectl.xml
@@ -0,0 +1,1021 @@
+<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<!--
+  This file is part of systemd.
+
+  Copyright 2013 Zbigniew Jędrzejewski-Szmek
+
+  systemd is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Lesser General Public License as published by
+  the Free Software Foundation; either version 2.1 of the License, or
+  (at your option) any later version.
+
+  systemd is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public License
+  along with systemd; If not, see <http://www.gnu.org/licenses/>.
+-->
+
+<refentry id="machinectl" conditional='ENABLE_MACHINED'
+    xmlns:xi="http://www.w3.org/2001/XInclude">
+
+  <refentryinfo>
+    <title>machinectl</title>
+    <productname>systemd</productname>
+
+    <authorgroup>
+      <author>
+        <contrib>Developer</contrib>
+        <firstname>Lennart</firstname>
+        <surname>Poettering</surname>
+        <email>lennart@poettering.net</email>
+      </author>
+    </authorgroup>
+  </refentryinfo>
+
+  <refmeta>
+    <refentrytitle>machinectl</refentrytitle>
+    <manvolnum>1</manvolnum>
+  </refmeta>
+
+  <refnamediv>
+    <refname>machinectl</refname>
+    <refpurpose>Control the systemd machine manager</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>machinectl</command>
+      <arg choice="opt" rep="repeat">OPTIONS</arg>
+      <arg choice="req">COMMAND</arg>
+      <arg choice="opt" rep="repeat">NAME</arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para><command>machinectl</command> may be used to introspect and
+    control the state of the
+    <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+    virtual machine and container registration manager
+    <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>
+
+    <para><command>machinectl</command> may be used to execute
+    operations on machines and images. Machines in this sense are
+    considered running instances of:</para>
+
+    <itemizedlist>
+      <listitem><para>Virtual Machines (VMs) that virtualize hardware
+      to run full operating system (OS) instances (including their kernels)
+      in a virtualized environment on top of the host OS.</para></listitem>
+
+      <listitem><para>Containers that share the hardware and
+      OS kernel with the host OS, in order to run
+      OS userspace instances on top the host OS.</para></listitem>
+
+      <listitem><para>The host system itself</para></listitem>
+    </itemizedlist>
+
+    <para>Machines are identified by names that follow the same rules
+    as UNIX and DNS host names, for details, see below. Machines are
+    instantiated from disk or file system images that frequently — but not
+    necessarily — carry the same name as machines running from
+    them. Images in this sense are considered:</para>
+
+    <itemizedlist>
+      <listitem><para>Directory trees containing an OS, including its
+      top-level directories <filename>/usr</filename>,
+      <filename>/etc</filename>, and so on.</para></listitem>
+
+      <listitem><para>btrfs subvolumes containing OS trees, similar to
+      normal directory trees.</para></listitem>
+
+      <listitem><para>Binary "raw" disk images containing MBR or GPT
+      partition tables and Linux file system partitions.</para></listitem>
+
+      <listitem><para>The file system tree of the host OS itself.</para></listitem>
+    </itemizedlist>
+
+  </refsect1>
+
+  <refsect1>
+    <title>Options</title>
+
+    <para>The following options are understood:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term><option>-p</option></term>
+        <term><option>--property=</option></term>
+
+        <listitem><para>When showing machine or image properties,
+        limit the output to certain properties as specified by the
+        argument. If not specified, all set properties are shown. The
+        argument should be a property name, such as
+        <literal>Name</literal>. If specified more than once, all
+        properties with the specified names are
+        shown.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-a</option></term>
+        <term><option>--all</option></term>
+
+        <listitem><para>When showing machine or image properties, show
+        all properties regardless of whether they are set or
+        not.</para>
+
+        <para>When listing VM or container images, do not suppress
+        images beginning in a dot character
+        (<literal>.</literal>).</para>
+
+        <para>When cleaning VM or container images, remove all images, not just hidden ones.</para></listitem>
+      </varlistentry>
+
+       <varlistentry>
+        <term><option>--value</option></term>
+
+        <listitem><para>When printing properties with <command>show</command>, only print the value,
+        and skip the property name and <literal>=</literal>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-l</option></term>
+        <term><option>--full</option></term>
+
+        <listitem><para>Do not ellipsize process tree entries.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--no-ask-password</option></term>
+
+        <listitem><para>Do not query the user for authentication for
+        privileged operations.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--kill-who=</option></term>
+
+        <listitem><para>When used with <command>kill</command>, choose
+        which processes to kill. Must be one of
+        <option>leader</option>, or <option>all</option> to select
+        whether to kill only the leader process of the machine or all
+        processes of the machine. If omitted, defaults to
+        <option>all</option>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-s</option></term>
+        <term><option>--signal=</option></term>
+
+        <listitem><para>When used with <command>kill</command>, choose
+        which signal to send to selected processes. Must be one of the
+        well-known signal specifiers, such as
+        <constant>SIGTERM</constant>, <constant>SIGINT</constant> or
+        <constant>SIGSTOP</constant>. If omitted, defaults to
+        <constant>SIGTERM</constant>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+         <term><option>--uid=</option></term>
+
+         <listitem><para>When used with the <command>shell</command>
+         command, chooses the user ID to open the interactive shell
+         session as. If this switch is not specified, defaults to
+         <literal>root</literal>. Note that this switch is not
+         supported for the <command>login</command> command (see
+         below).</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-E <replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term>
+        <term><option>--setenv=<replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term>
+
+         <listitem><para>When used with the <command>shell</command> command, sets an environment
+         variable to pass to the executed shell. Takes an environment variable name and value,
+         separated by <literal>=</literal>. This switch may be used multiple times to set multiple
+         environment variables. Note that this switch is not supported for the
+         <command>login</command> command (see below).</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--mkdir</option></term>
+
+        <listitem><para>When used with <command>bind</command>, creates
+        the destination directory before applying the bind
+        mount.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--read-only</option></term>
+
+        <listitem><para>When used with <command>bind</command>, applies
+        a read-only bind mount.</para>
+
+        <para>When used with <command>clone</command>, <command>import-raw</command> or <command>import-tar</command> a
+        read-only container or VM image is created.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-n</option></term>
+        <term><option>--lines=</option></term>
+
+        <listitem><para>When used with <command>status</command>,
+        controls the number of journal lines to show, counting from
+        the most recent ones. Takes a positive integer argument.
+        Defaults to 10.</para>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>-o</option></term>
+        <term><option>--output=</option></term>
+
+        <listitem><para>When used with <command>status</command>,
+        controls the formatting of the journal entries that are shown.
+        For the available choices, see
+        <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+        Defaults to <literal>short</literal>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--verify=</option></term>
+
+        <listitem><para>When downloading a container or VM image,
+        specify whether the image shall be verified before it is made
+        available. Takes one of <literal>no</literal>,
+        <literal>checksum</literal> and <literal>signature</literal>.
+        If <literal>no</literal>, no verification is done. If
+        <literal>checksum</literal> is specified, the download is
+        checked for integrity after the transfer is complete, but no
+        signatures are verified. If <literal>signature</literal> is
+        specified, the checksum is verified and the image's signature
+        is checked against a local keyring of trustable vendors. It is
+        strongly recommended to set this option to
+        <literal>signature</literal> if the server and protocol
+        support this. Defaults to
+        <literal>signature</literal>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--force</option></term>
+
+        <listitem><para>When downloading a container or VM image, and
+        a local copy by the specified local machine name already
+        exists, delete it first and replace it by the newly downloaded
+        image.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><option>--format=</option></term>
+
+        <listitem><para>When used with the <option>export-tar</option>
+        or <option>export-raw</option> commands, specifies the
+        compression format to use for the resulting file. Takes one of
+        <literal>uncompressed</literal>, <literal>xz</literal>,
+        <literal>gzip</literal>, <literal>bzip2</literal>. By default,
+        the format is determined automatically from the image file
+        name passed.</para></listitem>
+      </varlistentry>
+
+      <xi:include href="user-system-options.xml" xpointer="host" />
+      <xi:include href="user-system-options.xml" xpointer="machine" />
+
+      <xi:include href="standard-options.xml" xpointer="no-pager" />
+      <xi:include href="standard-options.xml" xpointer="no-legend" />
+      <xi:include href="standard-options.xml" xpointer="help" />
+      <xi:include href="standard-options.xml" xpointer="version" />
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Commands</title>
+
+    <para>The following commands are understood:</para>
+
+    <refsect2><title>Machine Commands</title><variablelist>
+
+      <varlistentry>
+        <term><command>list</command></term>
+
+        <listitem><para>List currently running (online) virtual
+        machines and containers. To enumerate machine images that can
+        be started, use <command>list-images</command> (see
+        below). Note that this command hides the special
+        <literal>.host</literal> machine by default. Use the
+        <option>--all</option> switch to show it.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>status</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Show runtime status information about
+        one or more virtual machines and containers, followed by the
+        most recent log data from the journal. This function is
+        intended to generate human-readable output. If you are looking
+        for computer-parsable output, use <command>show</command>
+        instead. Note that the log data shown is reported by the
+        virtual machine or container manager, and frequently contains
+        console output of the machine, but not necessarily journal
+        contents of the machine itself.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>show</command> [<replaceable>NAME</replaceable>...]</term>
+
+        <listitem><para>Show properties of one or more registered
+        virtual machines or containers or the manager itself. If no
+        argument is specified, properties of the manager will be
+        shown. If a NAME is specified, properties of this virtual
+        machine or container are shown. By default, empty properties
+        are suppressed. Use <option>--all</option> to show those too.
+        To select specific properties to show, use
+        <option>--property=</option>. This command is intended to be
+        used whenever computer-parsable output is required, and does
+        not print the cgroup tree or journal entries. Use
+        <command>status</command> if you are looking for formatted
+        human-readable output.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>start</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Start a container as a system service, using
+        <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+        This starts <filename>systemd-nspawn@.service</filename>,
+        instantiated for the specified machine name, similar to the
+        effect of <command>systemctl start</command> on the service
+        name. <command>systemd-nspawn</command> looks for a container
+        image by the specified name in
+        <filename>/var/lib/machines/</filename> (and other search
+        paths, see below) and runs it. Use
+        <command>list-images</command> (see below) for listing
+        available container images to start.</para>
+
+        <para>Note that
+        <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
+        also interfaces with a variety of other container and VM
+        managers, <command>systemd-nspawn</command> is just one
+        implementation of it. Most of the commands available in
+        <command>machinectl</command> may be used on containers or VMs
+        controlled by other managers, not just
+        <command>systemd-nspawn</command>. Starting VMs and container
+        images on those managers requires manager-specific
+        tools.</para>
+
+        <para>To interactively start a container on the command line
+        with full access to the container's console, please invoke
+        <command>systemd-nspawn</command> directly. To stop a running
+        container use <command>machinectl poweroff</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>login</command> [<replaceable>NAME</replaceable>]</term>
+
+        <listitem><para>Open an interactive terminal login session in
+        a container or on the local host. If an argument is supplied,
+        it refers to the container machine to connect to. If none is
+        specified, or the container name is specified as the empty
+        string, or the special machine name <literal>.host</literal>
+        (see below) is specified, the connection is made to the local
+        host instead. This will create a TTY connection to a specific
+        container or the local host and asks for the execution of a
+        getty on it. Note that this is only supported for containers
+        running
+        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        as init system.</para>
+
+        <para>This command will open a full login prompt on the
+        container or the local host, which then asks for username and
+        password. Use <command>shell</command> (see below) or
+        <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        with the <option>--machine=</option> switch to directly invoke
+        a single command, either interactively or in the
+        background.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>shell</command> [[<replaceable>NAME</replaceable>@]<replaceable>NAME</replaceable> [<replaceable>PATH</replaceable> [<replaceable>ARGUMENTS</replaceable>...]]] </term>
+
+        <listitem><para>Open an interactive shell session in a
+        container or on the local host. The first argument refers to
+        the container machine to connect to. If none is specified, or
+        the machine name is specified as the empty string, or the
+        special machine name <literal>.host</literal> (see below) is
+        specified, the connection is made to the local host
+        instead. This works similar to <command>login</command> but
+        immediately invokes a user process. This command runs the
+        specified executable with the specified arguments, or
+        <filename>/bin/sh</filename> if none is specified. By default,
+        opens a <literal>root</literal> shell, but by using
+        <option>--uid=</option>, or by prefixing the machine name with
+        a username and an <literal>@</literal> character, a different
+        user may be selected. Use <option>--setenv=</option> to set
+        environment variables for the executed process.</para>
+
+        <para>When using the <command>shell</command> command without
+        arguments, (thus invoking the executed shell or command on the
+        local host), it is in many ways similar to a <citerefentry
+        project='die-net'><refentrytitle>su</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        session, but, unlike <command>su</command>, completely isolates
+        the new session from the originating session, so that it
+        shares no process or session properties, and is in a clean and
+        well-defined state. It will be tracked in a new utmp, login,
+        audit, security and keyring session, and will not inherit any
+        environment variables or resource limits, among other
+        properties.</para>
+
+        <para>Note that
+        <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        may be used in place of the <command>shell</command> command,
+        and allows more detailed, low-level configuration of the
+        invoked unit. However, it is frequently more privileged than
+        the <command>shell</command> command.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>enable</command> <replaceable>NAME</replaceable>...</term>
+        <term><command>disable</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Enable or disable a container as a system
+        service to start at system boot, using
+        <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+        This enables or disables
+        <filename>systemd-nspawn@.service</filename>, instantiated for
+        the specified machine name, similar to the effect of
+        <command>systemctl enable</command> or <command>systemctl
+        disable</command> on the service name.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>poweroff</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Power off one or more containers. This will
+        trigger a reboot by sending SIGRTMIN+4 to the container's init
+        process, which causes systemd-compatible init systems to shut
+        down cleanly. Use <command>stop</command> as alias for <command>poweroff</command>.
+        This operation does not work on containers that do not run a
+        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>-compatible
+        init system, such as sysvinit. Use
+        <command>terminate</command> (see below) to immediately
+        terminate a container or VM, without cleanly shutting it
+        down.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>reboot</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Reboot one or more containers. This will
+        trigger a reboot by sending SIGINT to the container's init
+        process, which is roughly equivalent to pressing Ctrl+Alt+Del
+        on a non-containerized system, and is compatible with
+        containers running any system manager.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>terminate</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Immediately terminates a virtual machine or
+        container, without cleanly shutting it down. This kills all
+        processes of the virtual machine or container and deallocates
+        all resources attached to that instance. Use
+        <command>poweroff</command> to issue a clean shutdown
+        request.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>kill</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Send a signal to one or more processes of the
+        virtual machine or container. This means processes as seen by
+        the host, not the processes inside the virtual machine or
+        container. Use <option>--kill-who=</option> to select which
+        process to kill. Use <option>--signal=</option> to select the
+        signal to send.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>bind</command> <replaceable>NAME</replaceable> <replaceable>PATH</replaceable> [<replaceable>PATH</replaceable>]</term>
+
+        <listitem><para>Bind mounts a directory from the host into the
+        specified container. The first directory argument is the
+        source directory on the host, the second directory argument
+        is the destination directory in the container. When the
+        latter is omitted, the destination path in the container is
+        the same as the source path on the host. When combined with
+        the <option>--read-only</option> switch, a ready-only bind
+        mount is created. When combined with the
+        <option>--mkdir</option> switch, the destination path is first
+        created before the mount is applied. Note that this option is
+        currently only supported for
+        <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+        containers.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>copy-to</command> <replaceable>NAME</replaceable> <replaceable>PATH</replaceable> [<replaceable>PATH</replaceable>]</term>
+
+        <listitem><para>Copies files or directories from the host
+        system into a running container. Takes a container name,
+        followed by the source path on the host and the destination
+        path in the container. If the destination path is omitted, the
+        same as the source path is used.</para></listitem>
+      </varlistentry>
+
+
+      <varlistentry>
+        <term><command>copy-from</command> <replaceable>NAME</replaceable> <replaceable>PATH</replaceable> [<replaceable>PATH</replaceable>]</term>
+
+        <listitem><para>Copies files or directories from a container
+        into the host system. Takes a container name, followed by the
+        source path in the container the destination path on the host.
+        If the destination path is omitted, the same as the source path
+        is used.</para></listitem>
+      </varlistentry>
+    </variablelist></refsect2>
+
+    <refsect2><title>Image Commands</title><variablelist>
+
+      <varlistentry>
+        <term><command>list-images</command></term>
+
+        <listitem><para>Show a list of locally installed container and
+        VM images. This enumerates all raw disk images and container
+        directories and subvolumes in
+        <filename>/var/lib/machines/</filename> (and other search
+        paths, see below). Use <command>start</command> (see above) to
+        run a container off one of the listed images. Note that, by
+        default, containers whose name begins with a dot
+        (<literal>.</literal>) are not shown. To show these too,
+        specify <option>--all</option>. Note that a special image
+        <literal>.host</literal> always implicitly exists and refers
+        to the image the host itself is booted from.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>image-status</command> [<replaceable>NAME</replaceable>...]</term>
+
+        <listitem><para>Show terse status information about one or
+        more container or VM images. This function is intended to
+        generate human-readable output. Use
+        <command>show-image</command> (see below) to generate
+        computer-parsable output instead.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>show-image</command> [<replaceable>NAME</replaceable>...]</term>
+
+        <listitem><para>Show properties of one or more registered
+        virtual machine or container images, or the manager itself. If
+        no argument is specified, properties of the manager will be
+        shown. If a NAME is specified, properties of this virtual
+        machine or container image are shown. By default, empty
+        properties are suppressed. Use <option>--all</option> to show
+        those too. To select specific properties to show, use
+        <option>--property=</option>. This command is intended to be
+        used whenever computer-parsable output is required. Use
+        <command>image-status</command> if you are looking for
+        formatted human-readable output.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>clone</command> <replaceable>NAME</replaceable> <replaceable>NAME</replaceable></term>
+
+        <listitem><para>Clones a container or VM image. The arguments specify the name of the image to clone and the
+        name of the newly cloned image. Note that plain directory container images are cloned into btrfs subvolume
+        images with this command, if the underlying file system supports this.  Note that cloning a container or VM
+        image is optimized for btrfs file systems, and might not be efficient on others, due to file system
+        limitations.</para>
+
+        <para>Note that this command leaves host name, machine ID and
+        all other settings that could identify the instance
+        unmodified. The original image and the cloned copy will hence
+        share these credentials, and it might be necessary to manually
+        change them in the copy.</para>
+
+        <para>If combined with the <option>--read-only</option> switch a read-only cloned image is
+        created.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>rename</command> <replaceable>NAME</replaceable> <replaceable>NAME</replaceable></term>
+
+        <listitem><para>Renames a container or VM image. The
+        arguments specify the name of the image to rename and the new
+        name of the image.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>read-only</command> <replaceable>NAME</replaceable> [<replaceable>BOOL</replaceable>]</term>
+
+        <listitem><para>Marks or (unmarks) a container or VM image
+        read-only. Takes a VM or container image name, followed by a
+        boolean as arguments. If the boolean is omitted, positive is
+        implied, i.e. the image is marked read-only.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>remove</command> <replaceable>NAME</replaceable>...</term>
+
+        <listitem><para>Removes one or more container or VM images.
+        The special image <literal>.host</literal>, which refers to
+        the host's own directory tree, may not be
+        removed.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>set-limit</command> [<replaceable>NAME</replaceable>] <replaceable>BYTES</replaceable></term>
+
+        <listitem><para>Sets the maximum size in bytes that a specific
+        container or VM image, or all images, may grow up to on disk
+        (disk quota). Takes either one or two parameters. The first,
+        optional parameter refers to a container or VM image name. If
+        specified, the size limit of the specified image is changed. If
+        omitted, the overall size limit of the sum of all images stored
+        locally is changed. The final argument specifies the size
+        limit in bytes, possibly suffixed by the usual K, M, G, T
+        units. If the size limit shall be disabled, specify
+        <literal>-</literal> as size.</para>
+
+        <para>Note that per-container size limits are only supported
+        on btrfs file systems. Also note that, if
+        <command>set-limit</command> is invoked without an image
+        parameter, and <filename>/var/lib/machines</filename> is
+        empty, and the directory is not located on btrfs, a btrfs
+        loopback file is implicitly created as
+        <filename>/var/lib/machines.raw</filename> with the given
+        size, and mounted to
+        <filename>/var/lib/machines</filename>. The size of the
+        loopback may later be readjusted with
+        <command>set-limit</command>, as well. If such a
+        loopback-mounted <filename>/var/lib/machines</filename>
+        directory is used, <command>set-limit</command> without an image
+        name alters both the quota setting within the file system as
+        well as the loopback file and file system size
+        itself.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>clean</command></term>
+
+        <listitem><para>Remove hidden VM or container images (or all). This command removes all hidden machine images
+        from <filename>/var/lib/machines</filename>, i.e. those whose name begins with a dot. Use <command>machinectl
+        list-images --all</command> to see a list of all machine images, including the hidden ones.</para>
+
+        <para>When combined with the <option>--all</option> switch removes all images, not just hidden ones. This
+        command effectively empties <filename>/var/lib/machines</filename>.</para>
+
+        <para>Note that commands such as <command>machinectl pull-tar</command> or <command>machinectl
+        pull-raw</command> usually create hidden, read-only, unmodified machine images from the downloaded image first,
+        before cloning a writable working copy of it, in order to avoid duplicate downloads in case of images that are
+        reused multiple times. Use <command>machinectl clean</command> to remove old, hidden images created this
+        way.</para></listitem>
+      </varlistentry>
+
+    </variablelist></refsect2>
+
+    <refsect2><title>Image Transfer Commands</title><variablelist>
+
+      <varlistentry>
+        <term><command>pull-tar</command> <replaceable>URL</replaceable> [<replaceable>NAME</replaceable>]</term>
+
+        <listitem><para>Downloads a <filename>.tar</filename>
+        container image from the specified URL, and makes it available
+        under the specified local machine name. The URL must be of
+        type <literal>http://</literal> or
+        <literal>https://</literal>, and must refer to a
+        <filename>.tar</filename>, <filename>.tar.gz</filename>,
+        <filename>.tar.xz</filename> or <filename>.tar.bz2</filename>
+        archive file. If the local machine name is omitted, it
+        is automatically derived from the last component of the URL,
+        with its suffix removed.</para>
+
+        <para>The image is verified before it is made available,
+        unless <option>--verify=no</option> is specified. Verification
+        is done via SHA256SUMS and SHA256SUMS.gpg files that need to
+        be made available on the same web server, under the same URL
+        as the <filename>.tar</filename> file, but with the last
+        component (the filename) of the URL replaced. With
+        <option>--verify=checksum</option>, only the SHA256 checksum
+        for the file is verified, based on the
+        <filename>SHA256SUMS</filename> file. With
+        <option>--verify=signature</option>, the SHA256SUMS file is
+        first verified with detached GPG signature file
+        <filename>SHA256SUMS.gpg</filename>. The public key for this
+        verification step needs to be available in
+        <filename>/usr/lib/systemd/import-pubring.gpg</filename> or
+        <filename>/etc/systemd/import-pubring.gpg</filename>.</para>
+
+        <para>The container image will be downloaded and stored in a
+        read-only subvolume in
+        <filename>/var/lib/machines/</filename> that is named after
+        the specified URL and its HTTP etag. A writable snapshot is
+        then taken from this subvolume, and named after the specified
+        local name. This behavior ensures that creating multiple
+        container instances of the same URL is efficient, as multiple
+        downloads are not necessary. In order to create only the
+        read-only image, and avoid creating its writable snapshot,
+        specify <literal>-</literal> as local machine name.</para>
+
+        <para>Note that the read-only subvolume is prefixed with
+        <filename>.tar-</filename>, and is thus not shown by
+        <command>list-images</command>, unless <option>--all</option>
+        is passed.</para>
+
+        <para>Note that pressing C-c during execution of this command
+        will not abort the download. Use
+        <command>cancel-transfer</command>, described
+        below.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>pull-raw</command> <replaceable>URL</replaceable> [<replaceable>NAME</replaceable>]</term>
+
+        <listitem><para>Downloads a <filename>.raw</filename>
+        container or VM disk image from the specified URL, and makes
+        it available under the specified local machine name. The URL
+        must be of type <literal>http://</literal> or
+        <literal>https://</literal>. The container image must either
+        be a <filename>.qcow2</filename> or raw disk image, optionally
+        compressed as <filename>.gz</filename>,
+        <filename>.xz</filename>, or <filename>.bz2</filename>. If the
+        local machine name is omitted, it is automatically
+        derived from the last component of the URL, with its suffix
+        removed.</para>
+
+        <para>Image verification is identical for raw and tar images
+        (see above).</para>
+
+        <para>If the downloaded image is in
+        <filename>.qcow2</filename> format it is converted into a raw
+        image file before it is made available.</para>
+
+        <para>Downloaded images of this type will be placed as
+        read-only <filename>.raw</filename> file in
+        <filename>/var/lib/machines/</filename>. A local, writable
+        (reflinked) copy is then made under the specified local
+        machine name. To omit creation of the local, writable copy
+        pass <literal>-</literal> as local machine name.</para>
+
+        <para>Similar to the behavior of <command>pull-tar</command>,
+        the read-only image is prefixed with
+        <filename>.raw-</filename>, and thus not shown by
+        <command>list-images</command>, unless <option>--all</option>
+        is passed.</para>
+
+        <para>Note that pressing C-c during execution of this command
+        will not abort the download. Use
+        <command>cancel-transfer</command>, described
+        below.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>import-tar</command> <replaceable>FILE</replaceable> [<replaceable>NAME</replaceable>]</term>
+        <term><command>import-raw</command> <replaceable>FILE</replaceable> [<replaceable>NAME</replaceable>]</term>
+        <listitem><para>Imports a TAR or RAW container or VM image,
+        and places it under the specified name in
+        <filename>/var/lib/machines/</filename>. When
+        <command>import-tar</command> is used, the file specified as
+        the first argument should be a tar archive, possibly compressed
+        with xz, gzip or bzip2. It will then be unpacked into its own
+        subvolume in <filename>/var/lib/machines</filename>. When
+        <command>import-raw</command> is used, the file should be a
+        qcow2 or raw disk image, possibly compressed with xz, gzip or
+        bzip2. If the second argument (the resulting image name) is
+        not specified, it is automatically derived from the file
+        name. If the file name is passed as <literal>-</literal>, the
+        image is read from standard input, in which case the second
+        argument is mandatory.</para>
+
+        <para>Both <command>pull-tar</command> and <command>pull-raw</command>
+        will resize <filename>/var/lib/machines.raw</filename> and the
+        filesystem therein as necessary. Optionally, the
+        <option>--read-only</option> switch may be used to create a
+        read-only container or VM image. No cryptographic validation
+        is done when importing the images.</para>
+
+        <para>Much like image downloads, ongoing imports may be listed
+        with <command>list-transfers</command> and aborted with
+        <command>cancel-transfer</command>.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>export-tar</command> <replaceable>NAME</replaceable> [<replaceable>FILE</replaceable>]</term>
+        <term><command>export-raw</command> <replaceable>NAME</replaceable> [<replaceable>FILE</replaceable>]</term>
+        <listitem><para>Exports a TAR or RAW container or VM image and
+        stores it in the specified file. The first parameter should be
+        a VM or container image name. The second parameter should be a
+        file path the TAR or RAW image is written to. If the path ends
+        in <literal>.gz</literal>, the file is compressed with gzip, if
+        it ends in <literal>.xz</literal>, with xz, and if it ends in
+        <literal>.bz2</literal>, with bzip2. If the path ends in
+        neither, the file is left uncompressed. If the second argument
+        is missing, the image is written to standard output. The
+        compression may also be explicitly selected with the
+        <option>--format=</option> switch. This is in particular
+        useful if the second parameter is left unspecified.</para>
+
+        <para>Much like image downloads and imports, ongoing exports
+        may be listed with <command>list-transfers</command> and
+        aborted with
+        <command>cancel-transfer</command>.</para>
+
+        <para>Note that, currently, only directory and subvolume images
+        may be exported as TAR images, and only raw disk images as RAW
+        images.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>list-transfers</command></term>
+
+        <listitem><para>Shows a list of container or VM image
+        downloads, imports and exports that are currently in
+        progress.</para></listitem>
+      </varlistentry>
+
+      <varlistentry>
+        <term><command>cancel-transfers</command> <replaceable>ID</replaceable>...</term>
+
+        <listitem><para>Aborts a download, import or export of the
+        container or VM image with the specified ID. To list ongoing
+        transfers and their IDs, use
+        <command>list-transfers</command>. </para></listitem>
+      </varlistentry>
+
+    </variablelist></refsect2>
+
+  </refsect1>
+
+  <refsect1>
+    <title>Machine and Image Names</title>
+
+    <para>The <command>machinectl</command> tool operates on machines
+    and images whose names must be chosen following strict
+    rules. Machine names must be suitable for use as host names
+    following a conservative subset of DNS and UNIX/Linux
+    semantics. Specifically, they must consist of one or more
+    non-empty label strings, separated by dots. No leading or trailing
+    dots are allowed. No sequences of multiple dots are allowed. The
+    label strings may only consist of alphanumeric characters as well
+    as the dash and underscore. The maximum length of a machine name
+    is 64 characters.</para>
+
+    <para>A special machine with the name <literal>.host</literal>
+    refers to the running host system itself. This is useful for execution
+    operations or inspecting the host system as well. Note that
+    <command>machinectl list</command> will not show this special
+    machine unless the <option>--all</option> switch is specified.</para>
+
+    <para>Requirements on image names are less strict, however, they must be
+    valid UTF-8, must be suitable as file names (hence not be the
+    single or double dot, and not include a slash), and may not
+    contain control characters. Since many operations search for an
+    image by the name of a requested machine, it is recommended to name
+    images in the same strict fashion as machines.</para>
+
+    <para>A special image with the name <literal>.host</literal>
+    refers to the image of the running host system. It hence
+    conceptually maps to the special <literal>.host</literal> machine
+    name described above. Note that <command>machinectl
+    list-images</command> will not show this special image either, unless
+    <option>--all</option> is specified.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Files and Directories</title>
+
+    <para>Machine images are preferably stored in
+    <filename>/var/lib/machines/</filename>, but are also searched for
+    in <filename>/usr/local/lib/machines/</filename> and
+    <filename>/usr/lib/machines/</filename>. For compatibility reasons,
+    the directory <filename>/var/lib/container/</filename> is
+    searched, too. Note that images stored below
+    <filename>/usr</filename> are always considered read-only. It is
+    possible to symlink machines images from other directories into
+    <filename>/var/lib/machines/</filename> to make them available for
+    control with <command>machinectl</command>.</para>
+
+    <para>Note that many image operations are only supported,
+    efficient or atomic on btrfs file systems. Due to this, if the
+    <command>pull-tar</command>, <command>pull-raw</command>,
+    <command>import-tar</command>, <command>import-raw</command> and
+    <command>set-limit</command> commands notice that
+    <filename>/var/lib/machines</filename> is empty and not located on
+    btrfs, they will implicitly set up a loopback file
+    <filename>/var/lib/machines.raw</filename> containing a btrfs file
+    system that is mounted to
+    <filename>/var/lib/machines</filename>. The size of this loopback
+    file may be controlled dynamically with
+    <command>set-limit</command>.</para>
+
+    <para>Disk images are understood by
+    <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+    and <command>machinectl</command> in three formats:</para>
+
+    <itemizedlist>
+      <listitem><para>A simple directory tree, containing the files
+      and directories of the container to boot.</para></listitem>
+
+      <listitem><para>Subvolumes (on btrfs file systems), which are
+      similar to the simple directories, described above. However,
+      they have additional benefits, such as efficient cloning and
+      quota reporting.</para></listitem>
+
+      <listitem><para>"Raw" disk images, i.e. binary images of disks
+      with a GPT or MBR partition table. Images of this type are
+      regular files with the suffix
+      <literal>.raw</literal>.</para></listitem>
+    </itemizedlist>
+
+    <para>See
+    <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+    for more information on image formats, in particular its
+    <option>--directory=</option> and <option>--image=</option>
+    options.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Examples</title>
+    <example>
+      <title>Download an Ubuntu image and open a shell in it</title>
+
+      <programlisting># machinectl pull-tar https://cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-root.tar.gz
+# systemd-nspawn -M trusty-server-cloudimg-amd64-root</programlisting>
+
+      <para>This downloads and verifies the specified
+      <filename>.tar</filename> image, and then uses
+      <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+      to open a shell in it.</para>
+    </example>
+
+    <example>
+      <title>Download a Fedora image, set a root password in it, start
+      it as service</title>
+
+      <programlisting># machinectl pull-raw --verify=no https://dl.fedoraproject.org/pub/fedora/linux/releases/23/Cloud/x86_64/Images/Fedora-Cloud-Base-23-20151030.x86_64.raw.xz
+# systemd-nspawn -M Fedora-Cloud-Base-23-20151030
+# passwd
+# exit
+# machinectl start Fedora-Cloud-Base-23-20151030
+# machinectl login Fedora-Cloud-Base-23-20151030</programlisting>
+
+      <para>This downloads the specified <filename>.raw</filename>
+      image with verification disabled. Then, a shell is opened in it
+      and a root password is set. Afterwards the shell is left, and
+      the machine started as system service. With the last command a
+      login prompt into the container is requested.</para>
+    </example>
+
+    <example>
+      <title>Exports a container image as tar file</title>
+
+      <programlisting># machinectl export-tar fedora myfedora.tar.xz</programlisting>
+
+      <para>Exports the container <literal>fedora</literal> as an
+      xz-compressed tar file <filename>myfedora.tar.xz</filename> into the
+      current directory.</para>
+    </example>
+
+    <example>
+      <title>Create a new shell session</title>
+
+      <programlisting># machinectl shell --uid=lennart</programlisting>
+
+      <para>This creates a new shell session on the local host for
+      the user ID <literal>lennart</literal>, in a <citerefentry
+      project='die-net'><refentrytitle>su</refentrytitle><manvolnum>1</manvolnum></citerefentry>-like
+      fashion.</para>
+    </example>
+
+  </refsect1>
+
+  <refsect1>
+    <title>Exit status</title>
+
+    <para>On success, 0 is returned, a non-zero failure code
+    otherwise.</para>
+  </refsect1>
+
+  <xi:include href="less-variables.xml" />
+
+  <refsect1>
+    <title>See Also</title>
+    <para>
+      <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+      <citerefentry project='die-net'><refentrytitle>tar</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry project='die-net'><refentrytitle>xz</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry project='die-net'><refentrytitle>gzip</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+      <citerefentry project='die-net'><refentrytitle>bzip2</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+    </para>
+  </refsect1>
+
+</refentry>