diff options
Diffstat (limited to 'src/grp-journal/journalctl/journalctl.xml')
| -rw-r--r-- | src/grp-journal/journalctl/journalctl.xml | 914 |
1 files changed, 914 insertions, 0 deletions
diff --git a/src/grp-journal/journalctl/journalctl.xml b/src/grp-journal/journalctl/journalctl.xml new file mode 100644 index 0000000000..3efe6ef62a --- /dev/null +++ b/src/grp-journal/journalctl/journalctl.xml @@ -0,0 +1,914 @@ +<?xml version='1.0'?> <!--*-nxml-*--> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> + +<!-- + This file is part of systemd. + + Copyright 2012 Lennart Poettering + + systemd is free software; you can redistribute it and/or modify it + under the terms of the GNU Lesser General Public License as published by + the Free Software Foundation; either version 2.1 of the License, or + (at your option) any later version. + + systemd is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public License + along with systemd; If not, see <http://www.gnu.org/licenses/>. +--> + + <refentry id="journalctl" + xmlns:xi="http://www.w3.org/2001/XInclude"> + + <refentryinfo> + <title>journalctl</title> + <productname>systemd</productname> + + <authorgroup> + <author> + <contrib>Developer</contrib> + <firstname>Lennart</firstname> + <surname>Poettering</surname> + <email>lennart@poettering.net</email> + </author> + </authorgroup> + </refentryinfo> + + <refmeta> + <refentrytitle>journalctl</refentrytitle> + <manvolnum>1</manvolnum> + </refmeta> + + <refnamediv> + <refname>journalctl</refname> + <refpurpose>Query the systemd journal</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <cmdsynopsis> + <command>journalctl</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="opt" rep="repeat">MATCHES</arg> + </cmdsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Description</title> + + <para><command>journalctl</command> may be used to query the + contents of the + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> + journal as written by + <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> + + <para>If called without parameters, it will show the full + contents of the journal, starting with the oldest entry + collected.</para> + + <para>If one or more match arguments are passed, the output is + filtered accordingly. A match is in the format + <literal>FIELD=VALUE</literal>, + e.g. <literal>_SYSTEMD_UNIT=httpd.service</literal>, referring + to the components of a structured journal entry. See + <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> + for a list of well-known fields. If multiple matches are + specified matching different fields, the log entries are + filtered by both, i.e. the resulting output will show only + entries matching all the specified matches of this kind. If two + matches apply to the same field, then they are automatically + matched as alternatives, i.e. the resulting output will show + entries matching any of the specified matches for the same + field. Finally, the character <literal>+</literal> may appear + as a separate word between other terms on the command line. This + causes all matches before and after to be combined in a + disjunction (i.e. logical OR).</para> + + <para>As shortcuts for a few types of field/value matches, file + paths may be specified. If a file path refers to an executable + file, this is equivalent to an <literal>_EXE=</literal> match + for the canonicalized binary path. Similarly, if a path refers + to a device node then match is added for the kernel name of the + device (<literal>_KERNEL_DEVICE=</literal>). Also, matches for the + kernel names of all the parent devices are added automatically. + Device node paths are not stable across reboots, therefore match + for the current boot id (<literal>_BOOT_ID=</literal>) is + always added as well. Note that only the log entries for + the existing device nodes maybe queried by providing path to + the device node.</para> + + <para>Additional constraints may be added using options + <option>--boot</option>, <option>--unit=</option>, etc., to + further limit what entries will be shown (logical AND).</para> + + <para>Output is interleaved from all accessible journal files, + whether they are rotated or currently being written, and + regardless of whether they belong to the system itself or are + accessible user journals.</para> + + <para>The set of journal files which will be used can be + modified using the <option>--user</option>, + <option>--system</option>, <option>--directory</option>, and + <option>--file</option> options, see below.</para> + + <para>All users are granted access to their private per-user + journals. However, by default, only root and users who are + members of a few special groups are granted access to the system + journal and the journals of other users. Members of the groups + <literal>systemd-journal</literal>, <literal>adm</literal>, and + <literal>wheel</literal> can read all journal files. Note + that the two latter groups traditionally have additional + privileges specified by the distribution. Members of the + <literal>wheel</literal> group can often perform administrative + tasks.</para> + + <para>The output is paged through <command>less</command> by + default, and long lines are "truncated" to screen width. The + hidden part can be viewed by using the left-arrow and + right-arrow keys. Paging can be disabled; see the + <option>--no-pager</option> option and the "Environment" section + below.</para> + + <para>When outputting to a tty, lines are colored according to + priority: lines of level ERROR and higher are colored red; lines + of level NOTICE and higher are highlighted; other lines are + displayed normally.</para> + </refsect1> + + <refsect1> + <title>Options</title> + + <para>The following options are understood:</para> + + <variablelist> + <varlistentry> + <term><option>--no-full</option></term> + <term><option>--full</option></term> + <term><option>-l</option></term> + + <listitem><para>Ellipsize fields when they do not fit in + available columns. The default is to show full fields, + allowing them to wrap or be truncated by the pager, if one + is used.</para> + + <para>The old options + <option>-l</option>/<option>--full</option> are not useful + anymore, except to undo <option>--no-full</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>-a</option></term> + <term><option>--all</option></term> + + <listitem><para>Show all fields in full, even if they + include unprintable characters or are very + long.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-f</option></term> + <term><option>--follow</option></term> + + <listitem><para>Show only the most recent journal entries, + and continuously print new entries as they are appended to + the journal.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-e</option></term> + <term><option>--pager-end</option></term> + + <listitem><para>Immediately jump to the end of the journal + inside the implied pager tool. This implies + <option>-n1000</option> to guarantee that the pager will not + buffer logs of unbounded size. This may be overridden with + an explicit <option>-n</option> with some other numeric + value, while <option>-nall</option> will disable this cap. + Note that this option is only supported for the + <citerefentry project='man-pages'><refentrytitle>less</refentrytitle><manvolnum>1</manvolnum></citerefentry> + pager.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-n</option></term> + <term><option>--lines=</option></term> + + <listitem><para>Show the most recent journal events and + limit the number of events shown. If + <option>--follow</option> is used, this option is + implied. The argument is a positive integer or + <literal>all</literal> to disable line limiting. The default + value is 10 if no argument is given.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--no-tail</option></term> + + <listitem><para>Show all stored output lines, even in follow + mode. Undoes the effect of <option>--lines=</option>. + </para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-r</option></term> + <term><option>--reverse</option></term> + + <listitem><para>Reverse output so that the newest entries + are displayed first.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-o</option></term> + <term><option>--output=</option></term> + + <listitem><para>Controls the formatting of the journal + entries that are shown. Takes one of the following + options:</para> + <variablelist> + <varlistentry> + <term> + <option>short</option> + </term> + <listitem> + <para>is the default and generates an output that is + mostly identical to the formatting of classic syslog + files, showing one line per journal entry.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>short-iso</option> + </term> + <listitem> + <para>is very similar, but shows ISO 8601 wallclock + timestamps.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>short-precise</option> + </term> + <listitem> + <para>is very similar, but shows timestamps with full + microsecond precision.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>short-monotonic</option> + </term> + <listitem> + <para>is very similar, but shows monotonic timestamps + instead of wallclock timestamps.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>short-unix</option> + </term> + <listitem> + <para>is very similar, but shows seconds passed since January 1st 1970 UTC instead of wallclock + timestamps ("UNIX time"). The time is shown with microsecond accuracy.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>verbose</option> + </term> + <listitem> + <para>shows the full-structured entry items with all + fields.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>export</option> + </term> + <listitem> + <para>serializes the journal into a binary (but mostly + text-based) stream suitable for backups and network + transfer (see + <ulink url="http://www.freedesktop.org/wiki/Software/systemd/export">Journal Export Format</ulink> + for more information).</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>json</option> + </term> + <listitem> + <para>formats entries as JSON data structures, one per + line (see + <ulink url="http://www.freedesktop.org/wiki/Software/systemd/json">Journal JSON Format</ulink> + for more information).</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>json-pretty</option> + </term> + <listitem> + <para>formats entries as JSON data structures, but + formats them in multiple lines in order to make them + more readable by humans.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>json-sse</option> + </term> + <listitem> + <para>formats entries as JSON data structures, but wraps + them in a format suitable for + <ulink url="https://developer.mozilla.org/en-US/docs/Server-sent_events/Using_server-sent_events">Server-Sent Events</ulink>. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <option>cat</option> + </term> + <listitem> + <para>generates a very terse output, only showing the + actual message of each journal entry with no metadata, + not even a timestamp.</para> + </listitem> + </varlistentry> + </variablelist> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>--utc</option></term> + + <listitem><para>Express time in Coordinated Universal Time + (UTC).</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--no-hostname</option></term> + + <listitem><para>Don't show the hostname field of log messages originating from the local host. This switch only + has an effect on the <option>short</option> family of output modes (see above).</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-x</option></term> + <term><option>--catalog</option></term> + + <listitem><para>Augment log lines with explanation texts from + the message catalog. This will add explanatory help texts to + log messages in the output where this is available. These + short help texts will explain the context of an error or log + event, possible solutions, as well as pointers to support + forums, developer documentation, and any other relevant + manuals. Note that help texts are not available for all + messages, but only for selected ones. For more information on + the message catalog, please refer to the + <ulink url="http://www.freedesktop.org/wiki/Software/systemd/catalog">Message Catalog Developer Documentation</ulink>.</para> + + <para>Note: when attaching <command>journalctl</command> + output to bug reports, please do <emphasis>not</emphasis> use + <option>-x</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>-q</option></term> + <term><option>--quiet</option></term> + + <listitem><para>Suppresses all info messages + (i.e. "-- Logs begin at ...", "-- Reboot --"), + any warning messages regarding + inaccessible system journals when run as a normal + user.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-m</option></term> + <term><option>--merge</option></term> + + <listitem><para>Show entries interleaved from all available + journals, including remote ones.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-b <optional><replaceable>ID</replaceable></optional><optional><replaceable>±offset</replaceable></optional></option></term> + <term><option>--boot=<optional><replaceable>ID</replaceable></optional><optional><replaceable>±offset</replaceable></optional></option></term> + + <listitem><para>Show messages from a specific boot. This will + add a match for <literal>_BOOT_ID=</literal>.</para> + + <para>The argument may be empty, in which case logs for the + current boot will be shown.</para> + + <para>If the boot ID is omitted, a positive + <replaceable>offset</replaceable> will look up the boots + starting from the beginning of the journal, and an + equal-or-less-than zero <replaceable>offset</replaceable> will + look up boots starting from the end of the journal. Thus, + <constant>1</constant> means the first boot found in the + journal in chronological order, <constant>2</constant> the + second and so on; while <constant>-0</constant> is the last + boot, <constant>-1</constant> the boot before last, and so + on. An empty <replaceable>offset</replaceable> is equivalent + to specifying <constant>-0</constant>, except when the current + boot is not the last boot (e.g. because + <option>--directory</option> was specified to look at logs + from a different machine).</para> + + <para>If the 32-character <replaceable>ID</replaceable> is + specified, it may optionally be followed by + <replaceable>offset</replaceable> which identifies the boot + relative to the one given by boot + <replaceable>ID</replaceable>. Negative values mean earlier + boots and positive values mean later boots. If + <replaceable>offset</replaceable> is not specified, a value of + zero is assumed, and the logs for the boot given by + <replaceable>ID</replaceable> are shown.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>--list-boots</option></term> + + <listitem><para>Show a tabular list of boot numbers (relative to + the current boot), their IDs, and the timestamps of the first + and last message pertaining to the boot.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-k</option></term> + <term><option>--dmesg</option></term> + + <listitem><para>Show only kernel messages. This implies + <option>-b</option> and adds the match + <literal>_TRANSPORT=kernel</literal>.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-t</option></term> + <term><option>--identifier=<replaceable>SYSLOG_IDENTIFIER</replaceable></option></term> + + <listitem><para>Show messages for the specified syslog + identifier + <replaceable>SYSLOG_IDENTIFIER</replaceable>.</para> + + <para>This parameter can be specified multiple + times.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-u</option></term> + <term><option>--unit=<replaceable>UNIT</replaceable>|<replaceable>PATTERN</replaceable></option></term> + + <listitem><para>Show messages for the specified systemd unit + <replaceable>UNIT</replaceable> (such as a service unit), or + for any of the units matched by + <replaceable>PATTERN</replaceable>. If a pattern is + specified, a list of unit names found in the journal is + compared with the specified pattern and all that match are + used. For each unit name, a match is added for messages from + the unit + (<literal>_SYSTEMD_UNIT=<replaceable>UNIT</replaceable></literal>), + along with additional matches for messages from systemd and + messages about coredumps for the specified unit.</para> + + <para>This parameter can be specified multiple times.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>--user-unit=</option></term> + + <listitem><para>Show messages for the specified user session + unit. This will add a match for messages from the unit + (<literal>_SYSTEMD_USER_UNIT=</literal> and + <literal>_UID=</literal>) and additional matches for messages + from session systemd and messages about coredumps for the + specified unit.</para> + + <para>This parameter can be specified multiple times.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>-p</option></term> + <term><option>--priority=</option></term> + + <listitem><para>Filter output by message priorities or + priority ranges. Takes either a single numeric or textual log + level (i.e. between 0/<literal>emerg</literal> and + 7/<literal>debug</literal>), or a range of numeric/text log + levels in the form FROM..TO. The log levels are the usual + syslog log levels as documented in + <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, + i.e. <literal>emerg</literal> (0), + <literal>alert</literal> (1), <literal>crit</literal> (2), + <literal>err</literal> (3), <literal>warning</literal> (4), + <literal>notice</literal> (5), <literal>info</literal> (6), + <literal>debug</literal> (7). If a single log level is + specified, all messages with this log level or a lower (hence + more important) log level are shown. If a range is specified, + all messages within the range are shown, including both the + start and the end value of the range. This will add + <literal>PRIORITY=</literal> matches for the specified + priorities.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-c</option></term> + <term><option>--cursor=</option></term> + + <listitem><para>Start showing entries from the location in the + journal specified by the passed cursor.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--after-cursor=</option></term> + + <listitem><para>Start showing entries from the location in the + journal <emphasis>after</emphasis> the location specified by + the passed cursor. The cursor is shown when the + <option>--show-cursor</option> option is used.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>--show-cursor</option></term> + + <listitem><para>The cursor is shown after the last entry after + two dashes:</para> + <programlisting>-- cursor: s=0639...</programlisting> + <para>The format of the cursor is private + and subject to change.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-S</option></term> + <term><option>--since=</option></term> + <term><option>-U</option></term> + <term><option>--until=</option></term> + + <listitem><para>Start showing entries on or newer than the + specified date, or on or older than the specified date, + respectively. Date specifications should be of the format + <literal>2012-10-30 18:17:16</literal>. If the time part is + omitted, <literal>00:00:00</literal> is assumed. If only the + seconds component is omitted, <literal>:00</literal> is + assumed. If the date component is omitted, the current day is + assumed. Alternatively the strings + <literal>yesterday</literal>, <literal>today</literal>, + <literal>tomorrow</literal> are understood, which refer to + 00:00:00 of the day before the current day, the current day, + or the day after the current day, + respectively. <literal>now</literal> refers to the current + time. Finally, relative times may be specified, prefixed with + <literal>-</literal> or <literal>+</literal>, referring to + times before or after the current time, respectively. For complete + time and date specification, see + <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>-F</option></term> + <term><option>--field=</option></term> + + <listitem><para>Print all possible data values the specified + field can take in all entries of the journal.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-N</option></term> + <term><option>--fields</option></term> + + <listitem><para>Print all field names currently used in all entries of the journal.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--system</option></term> + <term><option>--user</option></term> + + <listitem><para>Show messages from system services and the + kernel (with <option>--system</option>). Show messages from + service of current user (with <option>--user</option>). If + neither is specified, show all messages that the user can see. + </para></listitem> + </varlistentry> + + <varlistentry> + <term><option>-M</option></term> + <term><option>--machine=</option></term> + + <listitem><para>Show messages from a running, local + container. Specify a container name to connect to.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>-D <replaceable>DIR</replaceable></option></term> + <term><option>--directory=<replaceable>DIR</replaceable></option></term> + + <listitem><para>Takes a directory path as argument. If + specified, journalctl will operate on the specified journal + directory <replaceable>DIR</replaceable> instead of the + default runtime and system journal paths.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--file=<replaceable>GLOB</replaceable></option></term> + + <listitem><para>Takes a file glob as an argument. If + specified, journalctl will operate on the specified journal + files matching <replaceable>GLOB</replaceable> instead of the + default runtime and system journal paths. May be specified + multiple times, in which case files will be suitably + interleaved.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--root=<replaceable>ROOT</replaceable></option></term> + + <listitem><para>Takes a directory path as an argument. If + specified, journalctl will operate on catalog file hierarchy + underneath the specified directory instead of the root + directory (e.g. <option>--update-catalog</option> will create + <filename><replaceable>ROOT</replaceable>/var/lib/systemd/catalog/database</filename>). + </para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--new-id128</option></term> + + <listitem><para>Instead of showing journal contents, generate + a new 128-bit ID suitable for identifying messages. This is + intended for usage by developers who need a new identifier for + a new message they introduce and want to make + recognizable. This will print the new ID in three different + formats which can be copied into source code or similar. + </para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--header</option></term> + + <listitem><para>Instead of showing journal contents, show + internal header information of the journal fields + accessed.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--disk-usage</option></term> + + <listitem><para>Shows the current disk usage of all journal + files. This shows the sum of the disk usage of all archived + and active journal files.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--vacuum-size=</option></term> + <term><option>--vacuum-time=</option></term> + <term><option>--vacuum-files=</option></term> + + <listitem><para>Removes archived journal files until the disk + space they use falls below the specified size (specified with + the usual <literal>K</literal>, <literal>M</literal>, + <literal>G</literal> and <literal>T</literal> suffixes), or all + archived journal files contain no data older than the specified + timespan (specified with the usual <literal>s</literal>, + <literal>m</literal>, <literal>h</literal>, + <literal>days</literal>, <literal>months</literal>, + <literal>weeks</literal> and <literal>years</literal> suffixes), + or no more than the specified number of separate journal files + remain. Note that running <option>--vacuum-size=</option> has + only an indirect effect on the output shown by + <option>--disk-usage</option>, as the latter includes active + journal files, while the vacuuming operation only operates + on archived journal files. Similarly, + <option>--vacuum-files=</option> might not actually reduce the + number of journal files to below the specified number, as it + will not remove active journal + files. <option>--vacuum-size=</option>, + <option>--vacuum-time=</option> and + <option>--vacuum-files=</option> may be combined in a single + invocation to enforce any combination of a size, a time and a + number of files limit on the archived journal + files. Specifying any of these three parameters as zero is + equivalent to not enforcing the specific limit, and is thus + redundant.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--list-catalog + <optional><replaceable>128-bit-ID...</replaceable></optional> + </option></term> + + <listitem><para>List the contents of the message catalog as a + table of message IDs, plus their short description strings. + </para> + + <para>If any <replaceable>128-bit-ID</replaceable>s are + specified, only those entries are shown.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>--dump-catalog + <optional><replaceable>128-bit-ID...</replaceable></optional> + </option></term> + + <listitem><para>Show the contents of the message catalog, with + entries separated by a line consisting of two dashes and the + ID (the format is the same as <filename>.catalog</filename> + files).</para> + + <para>If any <replaceable>128-bit-ID</replaceable>s are + specified, only those entries are shown.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><option>--update-catalog</option></term> + + <listitem><para>Update the message catalog index. This command + needs to be executed each time new catalog files are + installed, removed, or updated to rebuild the binary catalog + index.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--setup-keys</option></term> + + <listitem><para>Instead of showing journal contents, generate + a new key pair for Forward Secure Sealing (FSS). This will + generate a sealing key and a verification key. The sealing key + is stored in the journal data directory and shall remain on + the host. The verification key should be stored + externally. Refer to the <option>Seal=</option> option in + <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for information on Forward Secure Sealing and for a link to a + refereed scholarly paper detailing the cryptographic theory it + is based on.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--force</option></term> + + <listitem><para>When <option>--setup-keys</option> is passed + and Forward Secure Sealing (FSS) has already been configured, + recreate FSS keys.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--interval=</option></term> + + <listitem><para>Specifies the change interval for the sealing + key when generating an FSS key pair with + <option>--setup-keys</option>. Shorter intervals increase CPU + consumption but shorten the time range of undetectable journal + alterations. Defaults to 15min.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--verify</option></term> + + <listitem><para>Check the journal file for internal + consistency. If the file has been generated with FSS enabled and + the FSS verification key has been specified with + <option>--verify-key=</option>, authenticity of the journal file + is verified.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--verify-key=</option></term> + + <listitem><para>Specifies the FSS verification key to use for + the <option>--verify</option> operation.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--sync</option></term> + + <listitem><para>Asks the journal daemon to write all yet + unwritten journal data to the backing file system and + synchronize all journals. This call does not return until the + synchronization operation is complete. This command guarantees + that any log messages written before its invocation are safely + stored on disk at the time it returns.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--flush</option></term> + + <listitem><para>Asks the journal daemon to flush any log data + stored in <filename>/run/log/journal</filename> into + <filename>/var/log/journal</filename>, if persistent storage + is enabled. This call does not return until the operation is + complete. Note that this call is idempotent: the data is only + flushed from <filename>/run/log/journal</filename> into + <filename>/var/log/journal</filename> once during system + runtime, and this command exits cleanly without executing any + operation if this has already has happened. This command + effectively guarantees that all data is flushed to + <filename>/var/log/journal</filename> at the time it + returns.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--rotate</option></term> + + <listitem><para>Asks the journal daemon to rotate journal + files. This call does not return until the rotation operation + is complete.</para></listitem> + </varlistentry> + + <xi:include href="standard-options.xml" xpointer="help" /> + <xi:include href="standard-options.xml" xpointer="version" /> + <xi:include href="standard-options.xml" xpointer="no-pager" /> + </variablelist> + </refsect1> + + <refsect1> + <title>Exit status</title> + + <para>On success, 0 is returned; otherwise, a non-zero failure + code is returned.</para> + </refsect1> + + <xi:include href="less-variables.xml" /> + + <refsect1> + <title>Examples</title> + + <para>Without arguments, all collected logs are shown + unfiltered:</para> + + <programlisting>journalctl</programlisting> + + <para>With one match specified, all entries with a field matching + the expression are shown:</para> + + <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service</programlisting> + + <para>If two different fields are matched, only entries matching + both expressions at the same time are shown:</para> + + <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097</programlisting> + + <para>If two matches refer to the same field, all entries matching + either expression are shown:</para> + + <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _SYSTEMD_UNIT=dbus.service</programlisting> + + <para>If the separator <literal>+</literal> is used, two + expressions may be combined in a logical OR. The following will + show all messages from the Avahi service process with the PID + 28097 plus all messages from the D-Bus service (from any of its + processes):</para> + + <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097 + _SYSTEMD_UNIT=dbus.service</programlisting> + + <para>Show all logs generated by the D-Bus executable:</para> + + <programlisting>journalctl /usr/bin/dbus-daemon</programlisting> + + <para>Show all kernel logs from previous boot:</para> + + <programlisting>journalctl -k -b -1</programlisting> + + <para>Show a live log display from a system service + <filename>apache.service</filename>:</para> + + <programlisting>journalctl -f -u apache</programlisting> + + </refsect1> + + <refsect1> + <title>See Also</title> + <para> + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, + <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry> + </para> + </refsect1> +</refentry> |