diff options
Diffstat (limited to 'src/grp-system/systemd/systemd.service.xml')
-rw-r--r-- | src/grp-system/systemd/systemd.service.xml | 1350 |
1 files changed, 1350 insertions, 0 deletions
diff --git a/src/grp-system/systemd/systemd.service.xml b/src/grp-system/systemd/systemd.service.xml new file mode 100644 index 0000000000..875d368fcf --- /dev/null +++ b/src/grp-system/systemd/systemd.service.xml @@ -0,0 +1,1350 @@ +<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> + +<!-- + This file is part of systemd. + + Copyright 2010 Lennart Poettering + + systemd is free software; you can redistribute it and/or modify it + under the terms of the GNU Lesser General Public License as published by + the Free Software Foundation; either version 2.1 of the License, or + (at your option) any later version. + + systemd is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public License + along with systemd; If not, see <http://www.gnu.org/licenses/>. +--> + +<refentry id="systemd.service"> + <refentryinfo> + <title>systemd.service</title> + <productname>systemd</productname> + + <authorgroup> + <author> + <contrib>Developer</contrib> + <firstname>Lennart</firstname> + <surname>Poettering</surname> + <email>lennart@poettering.net</email> + </author> + </authorgroup> + </refentryinfo> + + <refmeta> + <refentrytitle>systemd.service</refentrytitle> + <manvolnum>5</manvolnum> + </refmeta> + + <refnamediv> + <refname>systemd.service</refname> + <refpurpose>Service unit configuration</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <para><filename><replaceable>service</replaceable>.service</filename></para> + </refsynopsisdiv> + + <refsect1> + <title>Description</title> + + <para>A unit configuration file whose name ends in + <filename>.service</filename> encodes information about a process + controlled and supervised by systemd.</para> + + <para>This man page lists the configuration options specific to + this unit type. See + <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for the common options of all unit configuration files. The common + configuration items are configured in the generic + <literal>[Unit]</literal> and <literal>[Install]</literal> + sections. The service specific configuration options are + configured in the <literal>[Service]</literal> section.</para> + + <para>Additional options are listed in + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + which define the execution environment the commands are executed + in, and in + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + which define the way the processes of the service are terminated, + and in + <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + which configure resource control settings for the processes of the + service.</para> + + <para>If a service is requested under a certain name but no unit + configuration file is found, systemd looks for a SysV init script + by the same name (with the <filename>.service</filename> suffix + removed) and dynamically creates a service unit from that script. + This is useful for compatibility with SysV. Note that this + compatibility is quite comprehensive but not 100%. For details + about the incompatibilities, see the <ulink + url="http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities">Incompatibilities + with SysV</ulink> document.</para> + </refsect1> + + <refsect1> + <title>Automatic Dependencies</title> + + <para>Services with <varname>Type=dbus</varname> set automatically + acquire dependencies of type <varname>Requires=</varname> and + <varname>After=</varname> on + <filename>dbus.socket</filename>.</para> + + <para>Socket activated service are automatically ordered after + their activated <filename>.socket</filename> units via an + automatic <varname>After=</varname> dependency.</para> + + <para>Unless <varname>DefaultDependencies=</varname> in the <literal>[Unit]</literal> is set to + <option>false</option>, service units will implicitly have dependencies of type <varname>Requires=</varname> and + <varname>After=</varname> on <filename>sysinit.target</filename>, a dependency of type <varname>After=</varname> on + <filename>basic.target</filename> as well as dependencies of type <varname>Conflicts=</varname> and + <varname>Before=</varname> on <filename>shutdown.target</filename>. These ensure that normal service units pull in + basic system initialization, and are terminated cleanly prior to system shutdown. Only services involved with early + boot or late system shutdown should disable this option.</para> + + <para>Instanced service units (i.e. service units with an <literal>@</literal> in their name) are assigned by + default a per-template slice unit (see + <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>), named after the + template unit, containing all instances of the specific template. This slice is normally stopped at shutdown, + together with all template instances. If that is not desired, set <varname>DefaultDependencies=no</varname> in the + template unit, and either define your own per-template slice unit file that also sets + <varname>DefaultDependencies=no</varname>, or set <varname>Slice=system.slice</varname> (or another suitable slice) + in the template unit. Also see + <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> + + <para>Additional implicit dependencies may be added as result of + execution and resource control parameters as documented in + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> + and + <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> + </refsect1> + + <refsect1> + <title>Options</title> + + <para>Service files must include a <literal>[Service]</literal> + section, which carries information about the service and the + process it supervises. A number of options that may be used in + this section are shared with other unit types. These options are + documented in + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> + and + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. + The options specific to the <literal>[Service]</literal> section + of service units are the following:</para> + + <variablelist class='unit-directives'> + <varlistentry> + <term><varname>Type=</varname></term> + + <listitem><para>Configures the process start-up type for this + service unit. One of + <option>simple</option>, + <option>forking</option>, + <option>oneshot</option>, + <option>dbus</option>, + <option>notify</option> or + <option>idle</option>.</para> + + <para>If set to <option>simple</option> (the default if + neither <varname>Type=</varname> nor + <varname>BusName=</varname>, but <varname>ExecStart=</varname> + are specified), it is expected that the process configured + with <varname>ExecStart=</varname> is the main process of the + service. In this mode, if the process offers functionality to + other processes on the system, its communication channels + should be installed before the daemon is started up (e.g. + sockets set up by systemd, via socket activation), as systemd + will immediately proceed starting follow-up units.</para> + + <para>If set to <option>forking</option>, it is expected that + the process configured with <varname>ExecStart=</varname> will + call <function>fork()</function> as part of its start-up. The + parent process is expected to exit when start-up is complete + and all communication channels are set up. The child continues + to run as the main daemon process. This is the behavior of + traditional UNIX daemons. If this setting is used, it is + recommended to also use the <varname>PIDFile=</varname> + option, so that systemd can identify the main process of the + daemon. systemd will proceed with starting follow-up units as + soon as the parent process exits.</para> + + <para>Behavior of <option>oneshot</option> is similar to + <option>simple</option>; however, it is expected that the + process has to exit before systemd starts follow-up units. + <varname>RemainAfterExit=</varname> is particularly useful for + this type of service. This is the implied default if neither + <varname>Type=</varname> or <varname>ExecStart=</varname> are + specified.</para> + + <para>Behavior of <option>dbus</option> is similar to + <option>simple</option>; however, it is expected that the + daemon acquires a name on the D-Bus bus, as configured by + <varname>BusName=</varname>. systemd will proceed with + starting follow-up units after the D-Bus bus name has been + acquired. Service units with this option configured implicitly + gain dependencies on the <filename>dbus.socket</filename> + unit. This type is the default if <varname>BusName=</varname> + is specified.</para> + + <para>Behavior of <option>notify</option> is similar to + <option>simple</option>; however, it is expected that the + daemon sends a notification message via + <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> + or an equivalent call when it has finished starting up. + systemd will proceed with starting follow-up units after this + notification message has been sent. If this option is used, + <varname>NotifyAccess=</varname> (see below) should be set to + open access to the notification socket provided by systemd. If + <varname>NotifyAccess=</varname> is missing or set to + <option>none</option>, it will be forcibly set to + <option>main</option>. Note that currently + <varname>Type=</varname><option>notify</option> will not work + if used in combination with + <varname>PrivateNetwork=</varname><option>yes</option>.</para> + + <para>Behavior of <option>idle</option> is very similar to + <option>simple</option>; however, actual execution of the + service binary is delayed until all jobs are dispatched. This + may be used to avoid interleaving of output of shell services + with the status output on the console.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>RemainAfterExit=</varname></term> + + <listitem><para>Takes a boolean value that specifies whether + the service shall be considered active even when all its + processes exited. Defaults to <option>no</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>GuessMainPID=</varname></term> + + <listitem><para>Takes a boolean value that specifies whether + systemd should try to guess the main PID of a service if it + cannot be determined reliably. This option is ignored unless + <option>Type=forking</option> is set and + <option>PIDFile=</option> is unset because for the other types + or with an explicitly configured PID file, the main PID is + always known. The guessing algorithm might come to incorrect + conclusions if a daemon consists of more than one process. If + the main PID cannot be determined, failure detection and + automatic restarting of a service will not work reliably. + Defaults to <option>yes</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>PIDFile=</varname></term> + + <listitem><para>Takes an absolute file name pointing to the + PID file of this daemon. Use of this option is recommended for + services where <varname>Type=</varname> is set to + <option>forking</option>. systemd will read the PID of the + main process of the daemon after start-up of the service. + systemd will not write to the file configured here, although + it will remove the file after the service has shut down if it + still exists. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>BusName=</varname></term> + + <listitem><para>Takes a D-Bus bus name that this service is + reachable as. This option is mandatory for services where + <varname>Type=</varname> is set to + <option>dbus</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>ExecStart=</varname></term> + <listitem><para>Commands with their arguments that are + executed when this service is started. The value is split into + zero or more command lines according to the rules described + below (see section "Command Lines" below). + </para> + + <para>When <varname>Type=</varname> is not + <option>oneshot</option>, only one command may and must be + given. When <varname>Type=oneshot</varname> is used, zero or + more commands may be specified. This can be specified by + providing multiple command lines in the same directive, or + alternatively, this directive may be specified more than once + with the same effect. If the empty string is assigned to this + option, the list of commands to start is reset, prior + assignments of this option will have no effect. If no + <varname>ExecStart=</varname> is specified, then the service + must have <varname>RemainAfterExit=yes</varname> set.</para> + + <para>For each of the specified commands, the first argument must be an absolute path to an + executable. Optionally, if this file name is prefixed with <literal>@</literal>, the second token will be + passed as <literal>argv[0]</literal> to the executed process, followed by the further arguments specified. If + the absolute filename is prefixed with <literal>-</literal>, an exit code of the command normally considered a + failure (i.e. non-zero exit status or abnormal exit due to signal) is ignored and considered success. If the + absolute path is prefixed with <literal>+</literal> then it is executed with full + privileges. <literal>-</literal>, <literal>@</literal>, and <literal>+</literal> may be used together and they + can appear in any order.</para> + + <para>If more than one command is specified, the commands are + invoked sequentially in the order they appear in the unit + file. If one of the commands fails (and is not prefixed with + <literal>-</literal>), other lines are not executed, and the + unit is considered failed.</para> + + <para>Unless <varname>Type=forking</varname> is set, the + process started via this command line will be considered the + main process of the daemon.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>ExecStartPre=</varname></term> + <term><varname>ExecStartPost=</varname></term> + <listitem><para>Additional commands that are executed before + or after the command in <varname>ExecStart=</varname>, + respectively. Syntax is the same as for + <varname>ExecStart=</varname>, except that multiple command + lines are allowed and the commands are executed one after the + other, serially.</para> + + <para>If any of those commands (not prefixed with + <literal>-</literal>) fail, the rest are not executed and the + unit is considered failed.</para> + + <para><varname>ExecStart=</varname> commands are only run after + all <varname>ExecStartPre=</varname> commands that were not prefixed + with a <literal>-</literal> exit successfully.</para> + + <para><varname>ExecStartPost=</varname> commands are only run after + the service has started successfully, as determined by <varname>Type=</varname> + (i.e. the process has been started for <varname>Type=simple</varname> + or <varname>Type=idle</varname>, the process exits successfully for + <varname>Type=oneshot</varname>, the initial process exits successfully + for <varname>Type=forking</varname>, <literal>READY=1</literal> is sent + for <varname>Type=notify</varname>, or the <varname>BusName=</varname> + has been taken for <varname>Type=dbus</varname>).</para> + + <para>Note that <varname>ExecStartPre=</varname> may not be + used to start long-running processes. All processes forked + off by processes invoked via <varname>ExecStartPre=</varname> will + be killed before the next service process is run.</para> + + <para>Note that if any of the commands specified in <varname>ExecStartPre=</varname>, + <varname>ExecStart=</varname>, or <varname>ExecStartPost=</varname> fail (and are not prefixed with + <literal>-</literal>, see above) or time out before the service is fully up, execution continues with commands + specified in <varname>ExecStopPost=</varname>, the commands in <varname>ExecStop=</varname> are skipped.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>ExecReload=</varname></term> + <listitem><para>Commands to execute to trigger a configuration + reload in the service. This argument takes multiple command + lines, following the same scheme as described for + <varname>ExecStart=</varname> above. Use of this setting is + optional. Specifier and environment variable substitution is + supported here following the same scheme as for + <varname>ExecStart=</varname>.</para> + + <para>One additional, special environment variable is set: if + known, <varname>$MAINPID</varname> is set to the main process + of the daemon, and may be used for command lines like the + following:</para> + + <programlisting>/bin/kill -HUP $MAINPID</programlisting> + + <para>Note however that reloading a daemon by sending a signal + (as with the example line above) is usually not a good choice, + because this is an asynchronous operation and hence not + suitable to order reloads of multiple services against each + other. It is strongly recommended to set + <varname>ExecReload=</varname> to a command that not only + triggers a configuration reload of the daemon, but also + synchronously waits for it to complete.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>ExecStop=</varname></term> + <listitem><para>Commands to execute to stop the service + started via <varname>ExecStart=</varname>. This argument takes + multiple command lines, following the same scheme as described + for <varname>ExecStart=</varname> above. Use of this setting + is optional. After the commands configured in this option are + run, all processes remaining for a service are terminated + according to the <varname>KillMode=</varname> setting (see + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). + If this option is not specified, the process is terminated by + sending the signal specified in <varname>KillSignal=</varname> + when service stop is requested. Specifier and environment + variable substitution is supported (including + <varname>$MAINPID</varname>, see above).</para> + + <para>Note that it is usually not sufficient to specify a + command for this setting that only asks the service to + terminate (for example, by queuing some form of termination + signal for it), but does not wait for it to do so. Since the + remaining processes of the services are killed using + <constant>SIGKILL</constant> immediately after the command + exited, this would not result in a clean stop. The specified + command should hence be a synchronous operation, not an + asynchronous one.</para> + + <para>Note that the commands specified in <varname>ExecStop=</varname> are only executed when the service + started successfully first. They are not invoked if the service was never started at all, or in case its + start-up failed, for example because any of the commands specified in <varname>ExecStart=</varname>, + <varname>ExecStartPre=</varname> or <varname>ExecStartPost=</varname> failed (and weren't prefixed with + <literal>-</literal>, see above) or timed out. Use <varname>ExecStopPost=</varname> to invoke commands when a + service failed to start up correctly and is shut down again.</para> + + <para>It is recommended to use this setting for commands that communicate with the service requesting clean + termination. When the commands specified with this option are executed it should be assumed that the service is + still fully up and is able to react correctly to all commands. For post-mortem clean-up steps use + <varname>ExecStopPost=</varname> instead.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>ExecStopPost=</varname></term> + <listitem><para>Additional commands that are executed after the service is stopped. This includes cases where + the commands configured in <varname>ExecStop=</varname> were used, where the service does not have any + <varname>ExecStop=</varname> defined, or where the service exited unexpectedly. This argument takes multiple + command lines, following the same scheme as described for <varname>ExecStart=</varname>. Use of these settings + is optional. Specifier and environment variable substitution is supported. Note that – unlike + <varname>ExecStop=</varname> – commands specified with this setting are invoked when a service failed to start + up correctly and is shut down again.</para> + + <para>It is recommended to use this setting for clean-up operations that shall be executed even when the + service failed to start up correctly. Commands configured with this setting need to be able to operate even if + the service failed starting up half-way and left incompletely initialized data around. As the service's + processes have been terminated already when the commands specified with this setting are executed they should + not attempt to communicate with them.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>RestartSec=</varname></term> + <listitem><para>Configures the time to sleep before restarting + a service (as configured with <varname>Restart=</varname>). + Takes a unit-less value in seconds, or a time span value such + as "5min 20s". Defaults to 100ms.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>TimeoutStartSec=</varname></term> + <listitem><para>Configures the time to wait for start-up. If a + daemon service does not signal start-up completion within the + configured time, the service will be considered failed and + will be shut down again. Takes a unit-less value in seconds, + or a time span value such as "5min 20s". Pass + <literal>infinity</literal> to disable the timeout logic. Defaults to + <varname>DefaultTimeoutStartSec=</varname> from the manager + configuration file, except when + <varname>Type=oneshot</varname> is used, in which case the + timeout is disabled by default (see + <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>). + </para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>TimeoutStopSec=</varname></term> + <listitem><para>Configures the time to wait for stop. If a + service is asked to stop, but does not terminate in the + specified time, it will be terminated forcibly via + <constant>SIGTERM</constant>, and after another timeout of + equal duration with <constant>SIGKILL</constant> (see + <varname>KillMode=</varname> in + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). + Takes a unit-less value in seconds, or a time span value such + as "5min 20s". Pass <literal>infinity</literal> to disable the + timeout logic. Defaults to + <varname>DefaultTimeoutStopSec=</varname> from the manager + configuration file (see + <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>). + </para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>TimeoutSec=</varname></term> + <listitem><para>A shorthand for configuring both + <varname>TimeoutStartSec=</varname> and + <varname>TimeoutStopSec=</varname> to the specified value. + </para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>RuntimeMaxSec=</varname></term> + + <listitem><para>Configures a maximum time for the service to run. If this is used and the service has been + active for longer than the specified time it is terminated and put into a failure state. Note that this setting + does not have any effect on <varname>Type=oneshot</varname> services, as they terminate immediately after + activation completed. Pass <literal>infinity</literal> (the default) to configure no runtime + limit.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>WatchdogSec=</varname></term> + <listitem><para>Configures the watchdog timeout for a service. + The watchdog is activated when the start-up is completed. The + service must call + <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> + regularly with <literal>WATCHDOG=1</literal> (i.e. the + "keep-alive ping"). If the time between two such calls is + larger than the configured time, then the service is placed in + a failed state and it will be terminated with + <constant>SIGABRT</constant>. By setting + <varname>Restart=</varname> to <option>on-failure</option>, + <option>on-watchdog</option>, <option>on-abnormal</option> or + <option>always</option>, the service will be automatically + restarted. The time configured here will be passed to the + executed service process in the + <varname>WATCHDOG_USEC=</varname> environment variable. This + allows daemons to automatically enable the keep-alive pinging + logic if watchdog support is enabled for the service. If this + option is used, <varname>NotifyAccess=</varname> (see below) + should be set to open access to the notification socket + provided by systemd. If <varname>NotifyAccess=</varname> is + not set, it will be implicitly set to <option>main</option>. + Defaults to 0, which disables this feature. The service can + check whether the service manager expects watchdog keep-alive + notifications. See + <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> + for details. + <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry> + may be used to enable automatic watchdog notification support. + </para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>Restart=</varname></term> + <listitem><para>Configures whether the service shall be + restarted when the service process exits, is killed, or a + timeout is reached. The service process may be the main + service process, but it may also be one of the processes + specified with <varname>ExecStartPre=</varname>, + <varname>ExecStartPost=</varname>, + <varname>ExecStop=</varname>, + <varname>ExecStopPost=</varname>, or + <varname>ExecReload=</varname>. When the death of the process + is a result of systemd operation (e.g. service stop or + restart), the service will not be restarted. Timeouts include + missing the watchdog "keep-alive ping" deadline and a service + start, reload, and stop operation timeouts.</para> + + <para>Takes one of + <option>no</option>, + <option>on-success</option>, + <option>on-failure</option>, + <option>on-abnormal</option>, + <option>on-watchdog</option>, + <option>on-abort</option>, or + <option>always</option>. + If set to <option>no</option> (the default), the service will + not be restarted. If set to <option>on-success</option>, it + will be restarted only when the service process exits cleanly. + In this context, a clean exit means an exit code of 0, or one + of the signals + <constant>SIGHUP</constant>, + <constant>SIGINT</constant>, + <constant>SIGTERM</constant> or + <constant>SIGPIPE</constant>, and + additionally, exit statuses and signals specified in + <varname>SuccessExitStatus=</varname>. If set to + <option>on-failure</option>, the service will be restarted + when the process exits with a non-zero exit code, is + terminated by a signal (including on core dump, but excluding + the aforementioned four signals), when an operation (such as + service reload) times out, and when the configured watchdog + timeout is triggered. If set to <option>on-abnormal</option>, + the service will be restarted when the process is terminated + by a signal (including on core dump, excluding the + aforementioned four signals), when an operation times out, or + when the watchdog timeout is triggered. If set to + <option>on-abort</option>, the service will be restarted only + if the service process exits due to an uncaught signal not + specified as a clean exit status. If set to + <option>on-watchdog</option>, the service will be restarted + only if the watchdog timeout for the service expires. If set + to <option>always</option>, the service will be restarted + regardless of whether it exited cleanly or not, got terminated + abnormally by a signal, or hit a timeout.</para> + + <table> + <title>Exit causes and the effect of the <varname>Restart=</varname> settings on them</title> + + <tgroup cols='2'> + <colspec colname='path' /> + <colspec colname='expl' /> + <thead> + <row> + <entry>Restart settings/Exit causes</entry> + <entry><option>no</option></entry> + <entry><option>always</option></entry> + <entry><option>on-success</option></entry> + <entry><option>on-failure</option></entry> + <entry><option>on-abnormal</option></entry> + <entry><option>on-abort</option></entry> + <entry><option>on-watchdog</option></entry> + </row> + </thead> + <tbody> + <row> + <entry>Clean exit code or signal</entry> + <entry/> + <entry>X</entry> + <entry>X</entry> + <entry/> + <entry/> + <entry/> + <entry/> + </row> + <row> + <entry>Unclean exit code</entry> + <entry/> + <entry>X</entry> + <entry/> + <entry>X</entry> + <entry/> + <entry/> + <entry/> + </row> + <row> + <entry>Unclean signal</entry> + <entry/> + <entry>X</entry> + <entry/> + <entry>X</entry> + <entry>X</entry> + <entry>X</entry> + <entry/> + </row> + <row> + <entry>Timeout</entry> + <entry/> + <entry>X</entry> + <entry/> + <entry>X</entry> + <entry>X</entry> + <entry/> + <entry/> + </row> + <row> + <entry>Watchdog</entry> + <entry/> + <entry>X</entry> + <entry/> + <entry>X</entry> + <entry>X</entry> + <entry/> + <entry>X</entry> + </row> + </tbody> + </tgroup> + </table> + + <para>As exceptions to the setting above, the service will not + be restarted if the exit code or signal is specified in + <varname>RestartPreventExitStatus=</varname> (see below). + Also, the services will always be restarted if the exit code + or signal is specified in + <varname>RestartForceExitStatus=</varname> (see below).</para> + + <para>Setting this to <option>on-failure</option> is the + recommended choice for long-running services, in order to + increase reliability by attempting automatic recovery from + errors. For services that shall be able to terminate on their + own choice (and avoid immediate restarting), + <option>on-abnormal</option> is an alternative choice.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><varname>SuccessExitStatus=</varname></term> + <listitem><para>Takes a list of exit status definitions that, + when returned by the main service process, will be considered + successful termination, in addition to the normal successful + exit code 0 and the signals <constant>SIGHUP</constant>, + <constant>SIGINT</constant>, <constant>SIGTERM</constant>, and + <constant>SIGPIPE</constant>. Exit status definitions can + either be numeric exit codes or termination signal names, + separated by spaces. For example: + + <programlisting>SuccessExitStatus=1 2 8 SIGKILL</programlisting> + + ensures that exit codes 1, 2, 8 and + the termination signal <constant>SIGKILL</constant> are + considered clean service terminations. + </para> + + <para>Note that if a process has a signal handler installed + and exits by calling + <citerefentry><refentrytitle>_exit</refentrytitle><manvolnum>2</manvolnum></citerefentry> + in response to a signal, the information about the signal is + lost. Programs should instead perform cleanup and kill + themselves with the same signal instead. See + <ulink url="http://www.cons.org/cracauer/sigint.html">Proper + handling of SIGINT/SIGQUIT — How to be a proper + program</ulink>.</para> + + <para>This option may appear more than once, in which case the + list of successful exit statuses is merged. If the empty + string is assigned to this option, the list is reset, all + prior assignments of this option will have no + effect.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>RestartPreventExitStatus=</varname></term> + <listitem><para>Takes a list of exit status definitions that, + when returned by the main service process, will prevent + automatic service restarts, regardless of the restart setting + configured with <varname>Restart=</varname>. Exit status + definitions can either be numeric exit codes or termination + signal names, and are separated by spaces. Defaults to the + empty list, so that, by default, no exit status is excluded + from the configured restart logic. For example: + + <programlisting>RestartPreventExitStatus=1 6 SIGABRT</programlisting> + + ensures that exit codes 1 and 6 and the termination signal + <constant>SIGABRT</constant> will not result in automatic + service restarting. This option may appear more than once, in + which case the list of restart-preventing statuses is + merged. If the empty string is assigned to this option, the + list is reset and all prior assignments of this option will + have no effect.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>RestartForceExitStatus=</varname></term> + <listitem><para>Takes a list of exit status definitions that, + when returned by the main service process, will force automatic + service restarts, regardless of the restart setting configured + with <varname>Restart=</varname>. The argument format is + similar to + <varname>RestartPreventExitStatus=</varname>.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>PermissionsStartOnly=</varname></term> + <listitem><para>Takes a boolean argument. If true, the + permission-related execution options, as configured with + <varname>User=</varname> and similar options (see + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for more information), are only applied to the process started + with + <varname>ExecStart=</varname>, and not to the various other + <varname>ExecStartPre=</varname>, + <varname>ExecStartPost=</varname>, + <varname>ExecReload=</varname>, + <varname>ExecStop=</varname>, and + <varname>ExecStopPost=</varname> + commands. If false, the setting is applied to all configured + commands the same way. Defaults to false.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>RootDirectoryStartOnly=</varname></term> + <listitem><para>Takes a boolean argument. If true, the root + directory, as configured with the + <varname>RootDirectory=</varname> option (see + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for more information), is only applied to the process started + with <varname>ExecStart=</varname>, and not to the various + other <varname>ExecStartPre=</varname>, + <varname>ExecStartPost=</varname>, + <varname>ExecReload=</varname>, <varname>ExecStop=</varname>, + and <varname>ExecStopPost=</varname> commands. If false, the + setting is applied to all configured commands the same way. + Defaults to false.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>NonBlocking=</varname></term> + <listitem><para>Set the <constant>O_NONBLOCK</constant> flag + for all file descriptors passed via socket-based activation. + If true, all file descriptors >= 3 (i.e. all except stdin, + stdout, and stderr) will have the + <constant>O_NONBLOCK</constant> flag set and hence are in + non-blocking mode. This option is only useful in conjunction + with a socket unit, as described in + <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>. + Defaults to false.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>NotifyAccess=</varname></term> + <listitem><para>Controls access to the service status + notification socket, as accessible via the + <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> + call. Takes one of <option>none</option> (the default), + <option>main</option> or <option>all</option>. If + <option>none</option>, no daemon status updates are accepted + from the service processes, all status update messages are + ignored. If <option>main</option>, only service updates sent + from the main process of the service are accepted. If + <option>all</option>, all services updates from all members of + the service's control group are accepted. This option should + be set to open access to the notification socket when using + <varname>Type=notify</varname> or + <varname>WatchdogSec=</varname> (see above). If those options + are used but <varname>NotifyAccess=</varname> is not + configured, it will be implicitly set to + <option>main</option>.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>Sockets=</varname></term> + <listitem><para>Specifies the name of the socket units this + service shall inherit socket file descriptors from when the + service is started. Normally, it should not be necessary to use + this setting, as all socket file descriptors whose unit shares + the same name as the service (subject to the different unit + name suffix of course) are passed to the spawned + process.</para> + + <para>Note that the same socket file descriptors may be passed + to multiple processes simultaneously. Also note that a + different service may be activated on incoming socket traffic + than the one which is ultimately configured to inherit the + socket file descriptors. Or, in other words: the + <varname>Service=</varname> setting of + <filename>.socket</filename> units does not have to match the + inverse of the <varname>Sockets=</varname> setting of the + <filename>.service</filename> it refers to.</para> + + <para>This option may appear more than once, in which case the + list of socket units is merged. If the empty string is + assigned to this option, the list of sockets is reset, and all + prior uses of this setting will have no + effect.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>FailureAction=</varname></term> + <listitem><para>Configure the action to take when the service enters a failed state. Takes the same values as + the unit setting <varname>StartLimitAction=</varname> and executes the same actions (see + <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>). Defaults to + <option>none</option>. </para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>FileDescriptorStoreMax=</varname></term> + <listitem><para>Configure how many file descriptors may be + stored in the service manager for the service using + <citerefentry><refentrytitle>sd_pid_notify_with_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>'s + <literal>FDSTORE=1</literal> messages. This is useful for + implementing service restart schemes where the state is + serialized to <filename>/run</filename> and the file + descriptors passed to the service manager, to allow restarts + without losing state. Defaults to 0, i.e. no file descriptors + may be stored in the service manager by default. All file + descriptors passed to the service manager from a specific + service are passed back to the service's main process on the + next service restart. Any file descriptors passed to the + service manager are automatically closed when POLLHUP or + POLLERR is seen on them, or when the service is fully stopped + and no job queued or being executed for it.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>USBFunctionDescriptors=</varname></term> + <listitem><para>Configure the location of a file containing + <ulink + url="https://www.kernel.org/doc/Documentation/usb/functionfs.txt">USB + FunctionFS</ulink> descriptors, for implementation of USB + gadget functions. This is used only in conjunction with a + socket unit with <varname>ListenUSBFunction=</varname> + configured. The contents of this file are written to the + <filename>ep0</filename> file after it is + opened.</para></listitem> + </varlistentry> + + <varlistentry> + <term><varname>USBFunctionStrings=</varname></term> + <listitem><para>Configure the location of a file containing + USB FunctionFS strings. Behavior is similar to + <varname>USBFunctionDescriptors=</varname> + above.</para></listitem> + </varlistentry> + + </variablelist> + + <para>Check + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> + and + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for more settings.</para> + + </refsect1> + + <refsect1> + <title>Command lines</title> + + <para>This section describes command line parsing and + variable and specifier substitutions for + <varname>ExecStart=</varname>, + <varname>ExecStartPre=</varname>, + <varname>ExecStartPost=</varname>, + <varname>ExecReload=</varname>, + <varname>ExecStop=</varname>, and + <varname>ExecStopPost=</varname> options.</para> + + <para>Multiple command lines may be concatenated in a single + directive by separating them with semicolons (these semicolons + must be passed as separate words). Lone semicolons may be escaped + as <literal>\;</literal>.</para> + + <para>Each command line is split on whitespace, with the first + item being the command to execute, and the subsequent items being + the arguments. Double quotes ("...") and single quotes ('...') may + be used, in which case everything until the next matching quote + becomes part of the same argument. C-style escapes are also + supported. The table below contains the list of allowed escape + patterns. Only patterns which match the syntax in the table are + allowed; others will result in an error, and must be escaped by + doubling the backslash. Quotes themselves are removed after + parsing and escape sequences substituted. In addition, a trailing + backslash (<literal>\</literal>) may be used to merge lines. + </para> + + <para>This syntax is intended to be very similar to shell syntax, + but only the meta-characters and expansions described in the + following paragraphs are understood. Specifically, redirection + using + <literal><</literal>, + <literal><<</literal>, + <literal>></literal>, and + <literal>>></literal>, pipes using + <literal>|</literal>, running programs in the background using + <literal>&</literal>, and <emphasis>other elements of shell + syntax are not supported</emphasis>.</para> + + <para>The command to execute must be an absolute path name. It may + contain spaces, but control characters are not allowed.</para> + + <para>The command line accepts <literal>%</literal> specifiers as + described in + <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. + Note that the first argument of the command line (i.e. the program + to execute) may not include specifiers.</para> + + <para>Basic environment variable substitution is supported. Use + <literal>${FOO}</literal> as part of a word, or as a word of its + own, on the command line, in which case it will be replaced by the + value of the environment variable including all whitespace it + contains, resulting in a single argument. Use + <literal>$FOO</literal> as a separate word on the command line, in + which case it will be replaced by the value of the environment + variable split at whitespace, resulting in zero or more arguments. + For this type of expansion, quotes are respected when splitting + into words, and afterwards removed.</para> + + <para>Example:</para> + + <programlisting>Environment="ONE=one" 'TWO=two two' +ExecStart=/bin/echo $ONE $TWO ${TWO}</programlisting> + + <para>This will execute <command>/bin/echo</command> with four + arguments: <literal>one</literal>, <literal>two</literal>, + <literal>two</literal>, and <literal>two two</literal>.</para> + + <para>Example:</para> + <programlisting>Environment=ONE='one' "TWO='two two' too" THREE= +ExecStart=/bin/echo ${ONE} ${TWO} ${THREE} +ExecStart=/bin/echo $ONE $TWO $THREE</programlisting> + <para>This results in <filename>echo</filename> being + called twice, the first time with arguments + <literal>'one'</literal>, + <literal>'two two' too</literal>, <literal></literal>, + and the second time with arguments + <literal>one</literal>, <literal>two two</literal>, + <literal>too</literal>. + </para> + + <para>To pass a literal dollar sign, use <literal>$$</literal>. + Variables whose value is not known at expansion time are treated + as empty strings. Note that the first argument (i.e. the program + to execute) may not be a variable.</para> + + <para>Variables to be used in this fashion may be defined through + <varname>Environment=</varname> and + <varname>EnvironmentFile=</varname>. In addition, variables listed + in the section "Environment variables in spawned processes" in + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + which are considered "static configuration", may be used (this + includes e.g. <varname>$USER</varname>, but not + <varname>$TERM</varname>).</para> + + <para>Note that shell command lines are not directly supported. If + shell command lines are to be used, they need to be passed + explicitly to a shell implementation of some kind. Example:</para> + <programlisting>ExecStart=/bin/sh -c 'dmesg | tac'</programlisting> + + <para>Example:</para> + + <programlisting>ExecStart=/bin/echo one ; /bin/echo "two two"</programlisting> + + <para>This will execute <command>/bin/echo</command> two times, + each time with one argument: <literal>one</literal> and + <literal>two two</literal>, respectively. Because two commands are + specified, <varname>Type=oneshot</varname> must be used.</para> + + <para>Example:</para> + + <programlisting>ExecStart=/bin/echo / >/dev/null & \; \ +/bin/ls</programlisting> + + <para>This will execute <command>/bin/echo</command> + with five arguments: <literal>/</literal>, + <literal>>/dev/null</literal>, + <literal>&</literal>, <literal>;</literal>, and + <literal>/bin/ls</literal>.</para> + + <table> + <title>C escapes supported in command lines and environment variables</title> + <tgroup cols='2'> + <colspec colname='escape' /> + <colspec colname='meaning' /> + <thead> + <row> + <entry>Literal</entry> + <entry>Actual value</entry> + </row> + </thead> + <tbody> + <row> + <entry><literal>\a</literal></entry> + <entry>bell</entry> + </row> + <row> + <entry><literal>\b</literal></entry> + <entry>backspace</entry> + </row> + <row> + <entry><literal>\f</literal></entry> + <entry>form feed</entry> + </row> + <row> + <entry><literal>\n</literal></entry> + <entry>newline</entry> + </row> + <row> + <entry><literal>\r</literal></entry> + <entry>carriage return</entry> + </row> + <row> + <entry><literal>\t</literal></entry> + <entry>tab</entry> + </row> + <row> + <entry><literal>\v</literal></entry> + <entry>vertical tab</entry> + </row> + <row> + <entry><literal>\\</literal></entry> + <entry>backslash</entry> + </row> + <row> + <entry><literal>\"</literal></entry> + <entry>double quotation mark</entry> + </row> + <row> + <entry><literal>\'</literal></entry> + <entry>single quotation mark</entry> + </row> + <row> + <entry><literal>\s</literal></entry> + <entry>space</entry> + </row> + <row> + <entry><literal>\x<replaceable>xx</replaceable></literal></entry> + <entry>character number <replaceable>xx</replaceable> in hexadecimal encoding</entry> + </row> + <row> + <entry><literal>\<replaceable>nnn</replaceable></literal></entry> + <entry>character number <replaceable>nnn</replaceable> in octal encoding</entry> + </row> + </tbody> + </tgroup> + </table> + </refsect1> + + <refsect1> + <title>Examples</title> + + <example> + <title>Simple service</title> + + <para>The following unit file creates a service that will + execute <filename>/usr/sbin/foo-daemon</filename>. Since no + <varname>Type=</varname> is specified, the default + <varname>Type=</varname><option>simple</option> will be assumed. + systemd will assume the unit to be started immediately after the + program has begun executing.</para> + + <programlisting>[Unit] +Description=Foo + +[Service] +ExecStart=/usr/sbin/foo-daemon + +[Install] +WantedBy=multi-user.target</programlisting> + + <para>Note that systemd assumes here that the process started by + systemd will continue running until the service terminates. If + the program daemonizes itself (i.e. forks), please use + <varname>Type=</varname><option>forking</option> instead.</para> + + <para>Since no <varname>ExecStop=</varname> was specified, + systemd will send SIGTERM to all processes started from this + service, and after a timeout also SIGKILL. This behavior can be + modified, see + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for details.</para> + + <para>Note that this unit type does not include any type of + notification when a service has completed initialization. For + this, you should use other unit types, such as + <varname>Type=</varname><option>notify</option> if the service + understands systemd's notification protocol, + <varname>Type=</varname><option>forking</option> if the service + can background itself or + <varname>Type=</varname><option>dbus</option> if the unit + acquires a DBus name once initialization is complete. See + below.</para> + </example> + + <example> + <title>Oneshot service</title> + + <para>Sometimes, units should just execute an action without + keeping active processes, such as a filesystem check or a + cleanup action on boot. For this, + <varname>Type=</varname><option>oneshot</option> exists. Units + of this type will wait until the process specified terminates + and then fall back to being inactive. The following unit will + perform a cleanup action:</para> + + <programlisting>[Unit] +Description=Cleanup old Foo data + +[Service] +Type=oneshot +ExecStart=/usr/sbin/foo-cleanup + +[Install] +WantedBy=multi-user.target</programlisting> + + <para>Note that systemd will consider the unit to be in the + state "starting" until the program has terminated, so ordered + dependencies will wait for the program to finish before starting + themselves. The unit will revert to the "inactive" state after + the execution is done, never reaching the "active" state. That + means another request to start the unit will perform the action + again.</para> + + <para><varname>Type=</varname><option>oneshot</option> are the + only service units that may have more than one + <varname>ExecStart=</varname> specified. They will be executed + in order until either they are all successful or one of them + fails.</para> + </example> + + <example> + <title>Stoppable oneshot service</title> + + <para>Similarly to the oneshot services, there are sometimes + units that need to execute a program to set up something and + then execute another to shut it down, but no process remains + active while they are considered "started". Network + configuration can sometimes fall into this category. Another use + case is if a oneshot service shall not be executed each time + when they are pulled in as a dependency, but only the first + time.</para> + + <para>For this, systemd knows the setting + <varname>RemainAfterExit=</varname><option>yes</option>, which + causes systemd to consider the unit to be active if the start + action exited successfully. This directive can be used with all + types, but is most useful with + <varname>Type=</varname><option>oneshot</option> and + <varname>Type=</varname><option>simple</option>. With + <varname>Type=</varname><option>oneshot</option>, systemd waits + until the start action has completed before it considers the + unit to be active, so dependencies start only after the start + action has succeeded. With + <varname>Type=</varname><option>simple</option>, dependencies + will start immediately after the start action has been + dispatched. The following unit provides an example for a simple + static firewall.</para> + + <programlisting>[Unit] +Description=Simple firewall + +[Service] +Type=oneshot +RemainAfterExit=yes +ExecStart=/usr/local/sbin/simple-firewall-start +ExecStop=/usr/local/sbin/simple-firewall-stop + +[Install] +WantedBy=multi-user.target</programlisting> + + <para>Since the unit is considered to be running after the start + action has exited, invoking <command>systemctl start</command> + on that unit again will cause no action to be taken.</para> + </example> + + <example> + <title>Traditional forking services</title> + + <para>Many traditional daemons/services background (i.e. fork, + daemonize) themselves when starting. Set + <varname>Type=</varname><option>forking</option> in the + service's unit file to support this mode of operation. systemd + will consider the service to be in the process of initialization + while the original program is still running. Once it exits + successfully and at least a process remains (and + <varname>RemainAfterExit=</varname><option>no</option>), the + service is considered started.</para> + + <para>Often, a traditional daemon only consists of one process. + Therefore, if only one process is left after the original + process terminates, systemd will consider that process the main + process of the service. In that case, the + <varname>$MAINPID</varname> variable will be available in + <varname>ExecReload=</varname>, <varname>ExecStop=</varname>, + etc.</para> + + <para>In case more than one process remains, systemd will be + unable to determine the main process, so it will not assume + there is one. In that case, <varname>$MAINPID</varname> will not + expand to anything. However, if the process decides to write a + traditional PID file, systemd will be able to read the main PID + from there. Please set <varname>PIDFile=</varname> accordingly. + Note that the daemon should write that file before finishing + with its initialization. Otherwise, systemd might try to read the + file before it exists.</para> + + <para>The following example shows a simple daemon that forks and + just starts one process in the background:</para> + + <programlisting>[Unit] +Description=Some simple daemon + +[Service] +Type=forking +ExecStart=/usr/sbin/my-simple-daemon -d + +[Install] +WantedBy=multi-user.target</programlisting> + + <para>Please see + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for details on how you can influence the way systemd terminates + the service.</para> + </example> + + <example> + <title>DBus services</title> + + <para>For services that acquire a name on the DBus system bus, + use <varname>Type=</varname><option>dbus</option> and set + <varname>BusName=</varname> accordingly. The service should not + fork (daemonize). systemd will consider the service to be + initialized once the name has been acquired on the system bus. + The following example shows a typical DBus service:</para> + + <programlisting>[Unit] +Description=Simple DBus service + +[Service] +Type=dbus +BusName=org.example.simple-dbus-service +ExecStart=/usr/sbin/simple-dbus-service + +[Install] +WantedBy=multi-user.target</programlisting> + + <para>For <emphasis>bus-activatable</emphasis> services, do not + include a <literal>[Install]</literal> section in the systemd + service file, but use the <varname>SystemdService=</varname> + option in the corresponding DBus service file, for example + (<filename>/usr/share/dbus-1/system-services/org.example.simple-dbus-service.service</filename>):</para> + + <programlisting>[D-BUS Service] +Name=org.example.simple-dbus-service +Exec=/usr/sbin/simple-dbus-service +User=root +SystemdService=simple-dbus-service.service</programlisting> + + <para>Please see + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for details on how you can influence the way systemd terminates + the service.</para> + </example> + + <example> + <title>Services that notify systemd about their initialization</title> + + <para><varname>Type=</varname><option>simple</option> services + are really easy to write, but have the major disadvantage of + systemd not being able to tell when initialization of the given + service is complete. For this reason, systemd supports a simple + notification protocol that allows daemons to make systemd aware + that they are done initializing. Use + <varname>Type=</varname><option>notify</option> for this. A + typical service file for such a daemon would look like + this:</para> + + <programlisting>[Unit] +Description=Simple notifying service + +[Service] +Type=notify +ExecStart=/usr/sbin/simple-notifying-service + +[Install] +WantedBy=multi-user.target</programlisting> + + <para>Note that the daemon has to support systemd's notification + protocol, else systemd will think the service has not started yet + and kill it after a timeout. For an example of how to update + daemons to support this protocol transparently, take a look at + <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>. + systemd will consider the unit to be in the 'starting' state + until a readiness notification has arrived.</para> + + <para>Please see + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for details on how you can influence the way systemd terminates + the service.</para> + </example> + </refsect1> + + <refsect1> + <title>See Also</title> + <para> + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> + </para> + </refsect1> + +</refentry> |