diff options
Diffstat (limited to 'src/udev/udev-builtin-net_id.c')
| -rw-r--r-- | src/udev/udev-builtin-net_id.c | 638 |
1 files changed, 0 insertions, 638 deletions
diff --git a/src/udev/udev-builtin-net_id.c b/src/udev/udev-builtin-net_id.c deleted file mode 100644 index fe9d6f4482..0000000000 --- a/src/udev/udev-builtin-net_id.c +++ /dev/null @@ -1,638 +0,0 @@ -/*** - This file is part of systemd. - - Copyright 2012 Kay Sievers <kay@vrfy.org> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. -***/ - -/* - * Predictable network interface device names based on: - * - firmware/bios-provided index numbers for on-board devices - * - firmware-provided pci-express hotplug slot index number - * - physical/geographical location of the hardware - * - the interface's MAC address - * - * http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames - * - * Two character prefixes based on the type of interface: - * en — Ethernet - * sl — serial line IP (slip) - * wl — wlan - * ww — wwan - * - * Type of names: - * b<number> — BCMA bus core number - * c<bus_id> — CCW bus group name, without leading zeros [s390] - * o<index>[n<phys_port_name>|d<dev_port>] - * — on-board device index number - * s<slot>[f<function>][n<phys_port_name>|d<dev_port>] - * — hotplug slot index number - * x<MAC> — MAC address - * [P<domain>]p<bus>s<slot>[f<function>][n<phys_port_name>|d<dev_port>] - * — PCI geographical location - * [P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>] - * — USB port number chain - * - * All multi-function PCI devices will carry the [f<function>] number in the - * device name, including the function 0 device. - * - * When using PCI geography, The PCI domain is only prepended when it is not 0. - * - * For USB devices the full chain of port numbers of hubs is composed. If the - * name gets longer than the maximum number of 15 characters, the name is not - * exported. - * The usual USB configuration == 1 and interface == 0 values are suppressed. - * - * PCI Ethernet card with firmware index "1": - * ID_NET_NAME_ONBOARD=eno1 - * ID_NET_NAME_ONBOARD_LABEL=Ethernet Port 1 - * - * PCI Ethernet card in hotplug slot with firmware index number: - * /sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/net/ens1 - * ID_NET_NAME_MAC=enx000000000466 - * ID_NET_NAME_PATH=enp5s0 - * ID_NET_NAME_SLOT=ens1 - * - * PCI Ethernet multi-function card with 2 ports: - * /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/net/enp2s0f0 - * ID_NET_NAME_MAC=enx78e7d1ea46da - * ID_NET_NAME_PATH=enp2s0f0 - * /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.1/net/enp2s0f1 - * ID_NET_NAME_MAC=enx78e7d1ea46dc - * ID_NET_NAME_PATH=enp2s0f1 - * - * PCI wlan card: - * /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wlp3s0 - * ID_NET_NAME_MAC=wlx0024d7e31130 - * ID_NET_NAME_PATH=wlp3s0 - * - * USB built-in 3G modem: - * /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.6/net/wwp0s29u1u4i6 - * ID_NET_NAME_MAC=wwx028037ec0200 - * ID_NET_NAME_PATH=wwp0s29u1u4i6 - * - * USB Android phone: - * /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/net/enp0s29u1u2 - * ID_NET_NAME_MAC=enxd626b3450fb5 - * ID_NET_NAME_PATH=enp0s29u1u2 - */ - -#include <errno.h> -#include <fcntl.h> -#include <net/if.h> -#include <net/if_arp.h> -#include <stdarg.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> -#include <linux/pci_regs.h> - -#include "fd-util.h" -#include "fileio.h" -#include "stdio-util.h" -#include "string-util.h" -#include "udev.h" - -#define ONBOARD_INDEX_MAX (16*1024-1) - -enum netname_type{ - NET_UNDEF, - NET_PCI, - NET_USB, - NET_BCMA, - NET_VIRTIO, - NET_CCWGROUP, -}; - -struct netnames { - enum netname_type type; - - uint8_t mac[6]; - bool mac_valid; - - struct udev_device *pcidev; - char pci_slot[IFNAMSIZ]; - char pci_path[IFNAMSIZ]; - char pci_onboard[IFNAMSIZ]; - const char *pci_onboard_label; - - char usb_ports[IFNAMSIZ]; - char bcma_core[IFNAMSIZ]; - char ccw_group[IFNAMSIZ]; -}; - -/* retrieve on-board index number and label from firmware */ -static int dev_pci_onboard(struct udev_device *dev, struct netnames *names) { - unsigned dev_port = 0; - size_t l; - char *s; - const char *attr, *port_name; - int idx; - - /* ACPI _DSM — device specific method for naming a PCI or PCI Express device */ - attr = udev_device_get_sysattr_value(names->pcidev, "acpi_index"); - /* SMBIOS type 41 — Onboard Devices Extended Information */ - if (!attr) - attr = udev_device_get_sysattr_value(names->pcidev, "index"); - if (!attr) - return -ENOENT; - - idx = strtoul(attr, NULL, 0); - if (idx <= 0) - return -EINVAL; - - /* Some BIOSes report rubbish indexes that are excessively high (2^24-1 is an index VMware likes to report for - * example). Let's define a cut-off where we don't consider the index reliable anymore. We pick some arbitrary - * cut-off, which is somewhere beyond the realistic number of physical network interface a system might - * have. Ideally the kernel would already filter his crap for us, but it doesn't currently. */ - if (idx > ONBOARD_INDEX_MAX) - return -ENOENT; - - /* kernel provided port index for multiple ports on a single PCI function */ - attr = udev_device_get_sysattr_value(dev, "dev_port"); - if (attr) - dev_port = strtol(attr, NULL, 10); - - /* kernel provided front panel port name for multiple port PCI device */ - port_name = udev_device_get_sysattr_value(dev, "phys_port_name"); - - s = names->pci_onboard; - l = sizeof(names->pci_onboard); - l = strpcpyf(&s, l, "o%d", idx); - if (port_name) - l = strpcpyf(&s, l, "n%s", port_name); - else if (dev_port > 0) - l = strpcpyf(&s, l, "d%d", dev_port); - if (l == 0) - names->pci_onboard[0] = '\0'; - - names->pci_onboard_label = udev_device_get_sysattr_value(names->pcidev, "label"); - - return 0; -} - -/* read the 256 bytes PCI configuration space to check the multi-function bit */ -static bool is_pci_multifunction(struct udev_device *dev) { - _cleanup_close_ int fd = -1; - const char *filename; - uint8_t config[64]; - - filename = strjoina(udev_device_get_syspath(dev), "/config"); - fd = open(filename, O_RDONLY | O_CLOEXEC); - if (fd < 0) - return false; - if (read(fd, &config, sizeof(config)) != sizeof(config)) - return false; - - /* bit 0-6 header type, bit 7 multi/single function device */ - if ((config[PCI_HEADER_TYPE] & 0x80) != 0) - return true; - - return false; -} - -static int dev_pci_slot(struct udev_device *dev, struct netnames *names) { - struct udev *udev = udev_device_get_udev(names->pcidev); - unsigned domain, bus, slot, func, dev_port = 0; - size_t l; - char *s; - const char *attr, *port_name; - struct udev_device *pci = NULL; - char slots[PATH_MAX]; - _cleanup_closedir_ DIR *dir = NULL; - struct dirent *dent; - int hotplug_slot = 0, err = 0; - - if (sscanf(udev_device_get_sysname(names->pcidev), "%x:%x:%x.%u", &domain, &bus, &slot, &func) != 4) - return -ENOENT; - - /* kernel provided port index for multiple ports on a single PCI function */ - attr = udev_device_get_sysattr_value(dev, "dev_port"); - if (attr) - dev_port = strtol(attr, NULL, 10); - - /* kernel provided front panel port name for multiple port PCI device */ - port_name = udev_device_get_sysattr_value(dev, "phys_port_name"); - - /* compose a name based on the raw kernel's PCI bus, slot numbers */ - s = names->pci_path; - l = sizeof(names->pci_path); - if (domain > 0) - l = strpcpyf(&s, l, "P%u", domain); - l = strpcpyf(&s, l, "p%us%u", bus, slot); - if (func > 0 || is_pci_multifunction(names->pcidev)) - l = strpcpyf(&s, l, "f%u", func); - if (port_name) - l = strpcpyf(&s, l, "n%s", port_name); - else if (dev_port > 0) - l = strpcpyf(&s, l, "d%u", dev_port); - if (l == 0) - names->pci_path[0] = '\0'; - - /* ACPI _SUN — slot user number */ - pci = udev_device_new_from_subsystem_sysname(udev, "subsystem", "pci"); - if (!pci) { - err = -ENOENT; - goto out; - } - - snprintf(slots, sizeof slots, "%s/slots", udev_device_get_syspath(pci)); - dir = opendir(slots); - if (!dir) { - err = -errno; - goto out; - } - - for (dent = readdir(dir); dent != NULL; dent = readdir(dir)) { - int i; - char *rest, *address, str[PATH_MAX]; - - if (dent->d_name[0] == '.') - continue; - i = strtol(dent->d_name, &rest, 10); - if (rest[0] != '\0') - continue; - if (i < 1) - continue; - - snprintf(str, sizeof str, "%s/%s/address", slots, dent->d_name); - if (read_one_line_file(str, &address) >= 0) { - /* match slot address with device by stripping the function */ - if (strneq(address, udev_device_get_sysname(names->pcidev), strlen(address))) - hotplug_slot = i; - free(address); - } - - if (hotplug_slot > 0) - break; - } - - if (hotplug_slot > 0) { - s = names->pci_slot; - l = sizeof(names->pci_slot); - if (domain > 0) - l = strpcpyf(&s, l, "P%d", domain); - l = strpcpyf(&s, l, "s%d", hotplug_slot); - if (func > 0 || is_pci_multifunction(names->pcidev)) - l = strpcpyf(&s, l, "f%d", func); - if (port_name) - l = strpcpyf(&s, l, "n%s", port_name); - else if (dev_port > 0) - l = strpcpyf(&s, l, "d%d", dev_port); - if (l == 0) - names->pci_slot[0] = '\0'; - } -out: - udev_device_unref(pci); - return err; -} - -static int names_pci(struct udev_device *dev, struct netnames *names) { - struct udev_device *parent; - - assert(dev); - assert(names); - - parent = udev_device_get_parent(dev); - - /* there can only ever be one virtio bus per parent device, so we can - safely ignore any virtio buses. see - <http://lists.linuxfoundation.org/pipermail/virtualization/2015-August/030331.html> */ - while (parent && streq_ptr("virtio", udev_device_get_subsystem(parent))) - parent = udev_device_get_parent(parent); - - if (!parent) - return -ENOENT; - - /* check if our direct parent is a PCI device with no other bus in-between */ - if (streq_ptr("pci", udev_device_get_subsystem(parent))) { - names->type = NET_PCI; - names->pcidev = parent; - } else { - names->pcidev = udev_device_get_parent_with_subsystem_devtype(dev, "pci", NULL); - if (!names->pcidev) - return -ENOENT; - } - dev_pci_onboard(dev, names); - dev_pci_slot(dev, names); - return 0; -} - -static int names_usb(struct udev_device *dev, struct netnames *names) { - struct udev_device *usbdev; - char name[256]; - char *ports; - char *config; - char *interf; - size_t l; - char *s; - - assert(dev); - assert(names); - - usbdev = udev_device_get_parent_with_subsystem_devtype(dev, "usb", "usb_interface"); - if (!usbdev) - return -ENOENT; - - /* get USB port number chain, configuration, interface */ - strscpy(name, sizeof(name), udev_device_get_sysname(usbdev)); - s = strchr(name, '-'); - if (!s) - return -EINVAL; - ports = s+1; - - s = strchr(ports, ':'); - if (!s) - return -EINVAL; - s[0] = '\0'; - config = s+1; - - s = strchr(config, '.'); - if (!s) - return -EINVAL; - s[0] = '\0'; - interf = s+1; - - /* prefix every port number in the chain with "u" */ - s = ports; - while ((s = strchr(s, '.'))) - s[0] = 'u'; - s = names->usb_ports; - l = strpcpyl(&s, sizeof(names->usb_ports), "u", ports, NULL); - - /* append USB config number, suppress the common config == 1 */ - if (!streq(config, "1")) - l = strpcpyl(&s, sizeof(names->usb_ports), "c", config, NULL); - - /* append USB interface number, suppress the interface == 0 */ - if (!streq(interf, "0")) - l = strpcpyl(&s, sizeof(names->usb_ports), "i", interf, NULL); - if (l == 0) - return -ENAMETOOLONG; - - names->type = NET_USB; - return 0; -} - -static int names_bcma(struct udev_device *dev, struct netnames *names) { - struct udev_device *bcmadev; - unsigned int core; - - assert(dev); - assert(names); - - bcmadev = udev_device_get_parent_with_subsystem_devtype(dev, "bcma", NULL); - if (!bcmadev) - return -ENOENT; - - /* bus num:core num */ - if (sscanf(udev_device_get_sysname(bcmadev), "bcma%*u:%u", &core) != 1) - return -EINVAL; - /* suppress the common core == 0 */ - if (core > 0) - xsprintf(names->bcma_core, "b%u", core); - - names->type = NET_BCMA; - return 0; -} - -static int names_ccw(struct udev_device *dev, struct netnames *names) { - struct udev_device *cdev; - const char *bus_id; - size_t bus_id_len; - int rc; - - assert(dev); - assert(names); - - /* Retrieve the associated CCW device */ - cdev = udev_device_get_parent(dev); - if (!cdev) - return -ENOENT; - - /* Network devices are always grouped CCW devices */ - if (!streq_ptr("ccwgroup", udev_device_get_subsystem(cdev))) - return -ENOENT; - - /* Retrieve bus-ID of the grouped CCW device. The bus-ID uniquely - * identifies the network device on the Linux on System z channel - * subsystem. Note that the bus-ID contains lowercase characters. - */ - bus_id = udev_device_get_sysname(cdev); - if (!bus_id) - return -ENOENT; - - /* Check the length of the bus-ID. Rely on that the kernel provides - * a correct bus-ID; alternatively, improve this check and parse and - * verify each bus-ID part... - */ - bus_id_len = strlen(bus_id); - if (!bus_id_len || bus_id_len < 8 || bus_id_len > 9) - return -EINVAL; - - /* Strip leading zeros from the bus id for aesthetic purposes. This - * keeps the ccw names stable, yet much shorter in general case of - * bus_id 0.0.0600 -> 600. This is similar to e.g. how PCI domain is - * not prepended when it is zero. - */ - bus_id += strspn(bus_id, ".0"); - - /* Store the CCW bus-ID for use as network device name */ - rc = snprintf(names->ccw_group, sizeof(names->ccw_group), "c%s", bus_id); - if (rc >= 0 && rc < (int)sizeof(names->ccw_group)) - names->type = NET_CCWGROUP; - return 0; -} - -static int names_mac(struct udev_device *dev, struct netnames *names) { - const char *s; - unsigned int i; - unsigned int a1, a2, a3, a4, a5, a6; - - /* check for NET_ADDR_PERM, skip random MAC addresses */ - s = udev_device_get_sysattr_value(dev, "addr_assign_type"); - if (!s) - return EXIT_FAILURE; - i = strtoul(s, NULL, 0); - if (i != 0) - return 0; - - s = udev_device_get_sysattr_value(dev, "address"); - if (!s) - return -ENOENT; - if (sscanf(s, "%x:%x:%x:%x:%x:%x", &a1, &a2, &a3, &a4, &a5, &a6) != 6) - return -EINVAL; - - /* skip empty MAC addresses */ - if (a1 + a2 + a3 + a4 + a5 + a6 == 0) - return -EINVAL; - - names->mac[0] = a1; - names->mac[1] = a2; - names->mac[2] = a3; - names->mac[3] = a4; - names->mac[4] = a5; - names->mac[5] = a6; - names->mac_valid = true; - return 0; -} - -/* IEEE Organizationally Unique Identifier vendor string */ -static int ieee_oui(struct udev_device *dev, struct netnames *names, bool test) { - char str[32]; - - if (!names->mac_valid) - return -ENOENT; - /* skip commonly misused 00:00:00 (Xerox) prefix */ - if (memcmp(names->mac, "\0\0\0", 3) == 0) - return -EINVAL; - xsprintf(str, "OUI:%02X%02X%02X%02X%02X%02X", names->mac[0], - names->mac[1], names->mac[2], names->mac[3], names->mac[4], - names->mac[5]); - udev_builtin_hwdb_lookup(dev, NULL, str, NULL, test); - return 0; -} - -static int builtin_net_id(struct udev_device *dev, int argc, char *argv[], bool test) { - const char *s; - const char *p; - unsigned int i; - const char *devtype; - const char *prefix = "en"; - struct netnames names = {}; - int err; - - /* handle only ARPHRD_ETHER and ARPHRD_SLIP devices */ - s = udev_device_get_sysattr_value(dev, "type"); - if (!s) - return EXIT_FAILURE; - i = strtoul(s, NULL, 0); - switch (i) { - case ARPHRD_ETHER: - prefix = "en"; - break; - case ARPHRD_SLIP: - prefix = "sl"; - break; - default: - return 0; - } - - /* skip stacked devices, like VLANs, ... */ - s = udev_device_get_sysattr_value(dev, "ifindex"); - if (!s) - return EXIT_FAILURE; - p = udev_device_get_sysattr_value(dev, "iflink"); - if (!p) - return EXIT_FAILURE; - if (!streq(s, p)) - return 0; - - devtype = udev_device_get_devtype(dev); - if (devtype) { - if (streq("wlan", devtype)) - prefix = "wl"; - else if (streq("wwan", devtype)) - prefix = "ww"; - } - - err = names_mac(dev, &names); - if (err >= 0 && names.mac_valid) { - char str[IFNAMSIZ]; - - xsprintf(str, "%sx%02x%02x%02x%02x%02x%02x", prefix, - names.mac[0], names.mac[1], names.mac[2], - names.mac[3], names.mac[4], names.mac[5]); - udev_builtin_add_property(dev, test, "ID_NET_NAME_MAC", str); - - ieee_oui(dev, &names, test); - } - - /* get path names for Linux on System z network devices */ - err = names_ccw(dev, &names); - if (err >= 0 && names.type == NET_CCWGROUP) { - char str[IFNAMSIZ]; - - if (snprintf(str, sizeof(str), "%s%s", prefix, names.ccw_group) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_PATH", str); - goto out; - } - - /* get PCI based path names, we compose only PCI based paths */ - err = names_pci(dev, &names); - if (err < 0) - goto out; - - /* plain PCI device */ - if (names.type == NET_PCI) { - char str[IFNAMSIZ]; - - if (names.pci_onboard[0]) - if (snprintf(str, sizeof(str), "%s%s", prefix, names.pci_onboard) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_ONBOARD", str); - - if (names.pci_onboard_label) - if (snprintf(str, sizeof(str), "%s%s", prefix, names.pci_onboard_label) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_LABEL_ONBOARD", str); - - if (names.pci_path[0]) - if (snprintf(str, sizeof(str), "%s%s", prefix, names.pci_path) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_PATH", str); - - if (names.pci_slot[0]) - if (snprintf(str, sizeof(str), "%s%s", prefix, names.pci_slot) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_SLOT", str); - goto out; - } - - /* USB device */ - err = names_usb(dev, &names); - if (err >= 0 && names.type == NET_USB) { - char str[IFNAMSIZ]; - - if (names.pci_path[0]) - if (snprintf(str, sizeof(str), "%s%s%s", prefix, names.pci_path, names.usb_ports) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_PATH", str); - - if (names.pci_slot[0]) - if (snprintf(str, sizeof(str), "%s%s%s", prefix, names.pci_slot, names.usb_ports) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_SLOT", str); - goto out; - } - - /* Broadcom bus */ - err = names_bcma(dev, &names); - if (err >= 0 && names.type == NET_BCMA) { - char str[IFNAMSIZ]; - - if (names.pci_path[0]) - if (snprintf(str, sizeof(str), "%s%s%s", prefix, names.pci_path, names.bcma_core) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_PATH", str); - - if (names.pci_slot[0]) - if (snprintf(str, sizeof(str), "%s%s%s", prefix, names.pci_slot, names.bcma_core) < (int)sizeof(str)) - udev_builtin_add_property(dev, test, "ID_NET_NAME_SLOT", str); - goto out; - } -out: - return EXIT_SUCCESS; -} - -const struct udev_builtin udev_builtin_net_id = { - .name = "net_id", - .cmd = builtin_net_id, - .help = "Network device properties", -}; |