summaryrefslogtreecommitdiff
path: root/src/shared/conf-parser.h
AgeCommit message (Collapse)Author
2016-09-16shared/conf-parser: add config_parse_many which takes strv with dirsZbigniew Jędrzejewski-Szmek
This way we don't have to create a nulstr just to unpack it in a moment.
2016-09-16tree-wide: rename config_parse_many to …_nulstrZbigniew Jędrzejewski-Szmek
In preparation for adding a version which takes a strv.
2016-08-31networkd: add options to bridge (#4051)Tobias Jungel
This patch allows to configure AgeingTimeSec, Priority and DefaultPVID for bridge interfaces.
2016-05-09tree-wide: port more code to use ifname_valid()Lennart Poettering
2016-02-23tree-wide: minor formatting inconsistency cleanupsVito Caputo
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2015-12-06shared: include what we useThomas Hindoe Paaboel Andersen
The next step of a general cleanup of our includes. This one mostly adds missing includes but there are a few removals as well.
2015-11-18tree-wide: sort includes in *.hThomas Hindoe Paaboel Andersen
This is a continuation of the previous include sort patch, which only sorted for .c files.
2015-09-30log: move log_invalid_utf8() to log.hLennart Poettering
Also, make sure it follows the same scheme as log_syntax() does in its behaviour.
2015-09-10tree-wide: never use the off_t unless glibc makes us use itLennart Poettering
off_t is a really weird type as it is usually 64bit these days (at least in sane programs), but could theoretically be 32bit. We don't support off_t as 32bit builds though, but still constantly deal with safely converting from off_t to other types and back for no point. Hence, never use the type anymore. Always use uint64_t instead. This has various benefits, including that we can expose these values directly as D-Bus properties, and also that the values parse the same in all cases.
2015-09-06nspawn: add new .nspawn files for container settingsLennart Poettering
.nspawn fiels are simple settings files that may accompany container images and directories and contain settings otherwise passed on the nspawn command line. This provides an efficient way to attach execution data directly to containers.
2015-08-31networkd: dhcp-server - allow configuration of the poolTom Gundersen
The constraints we place on the pool is that it is a contiguous sequence of addresses in the same subnet as the server address, not including the subnet nor broadcast addresses, but possibly including the server address itself. If the server address is included in the pool it is (obviously) reserved and not handed out to clients.
2015-04-21log: move log_syntax() into src/shared/log.c, and make it more similar to ↵Lennart Poettering
the other log functions
2015-01-07conf-parse: make syntax logging functions behave more like other log functonsLennart Poettering
In particular, don't patch the error number to EINVAL if 0, and don't negate it. (Also, add do {} while (false) around multi-line macro)
2014-11-27log: add an "error" parameter to all low-level logging calls and intrdouce ↵Lennart Poettering
log_error_errno() as log calls that take error numbers This change has two benefits: - The format string %m will now resolve to the specified error (or to errno if the specified error is 0. This allows getting rid of a ton of strerror() invocations, a function that is not thread-safe. - The specified error can be passed to the journal in the ERRNO= field. Now of course, we just need somebody to convert all cases of this: log_error("Something happened: %s", strerror(-r)); into thus: log_error_errno(-r, "Something happened: %m");
2014-11-26logind: Support logind.conf.d directories in the usual search pathsJosh Triplett
This makes it possible to drop in logind configuration snippets from a package or other configuration management mechanism. Add documentation to the header of /etc/logind.conf pointing the user at /etc/logind.conf.d/*.conf. Introduce a new helper, conf_parse_many, to parse configuration files in a search path.
2014-09-18shared: conf-parser - don't leak memory on error in DEFINE_CONFIG_PARSE_ENUMVTom Gundersen
Found by Coverity. Fixes CID #1237746.
2014-09-17shared: conf-parserTom Gundersen
Check memory allocation. Found by Coverity. Fixes CID #1237644.
2014-07-31Reject invalid quoted stringsZbigniew Jędrzejewski-Szmek
String which ended in an unfinished quote were accepted, potentially with bad memory accesses. Reject anything which ends in a unfished quote, or contains non-whitespace characters right after the closing quote. _FOREACH_WORD now returns the invalid character in *state. But this return value is not checked anywhere yet. Also, make 'word' and 'state' variables const pointers, and rename 'w' to 'word' in various places. Things are easier to read if the same name is used consistently. mbiebl_> am I correct that something like this doesn't work mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-passwd "Unlock EncFS"' mbiebl_> systemd seems to strip of the quotes mbiebl_> systemctl status shows mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-password Unlock EncFS $RootDir $MountPoint mbiebl_> which is pretty weird
2014-07-16Let config_parse open file where applicableZbigniew Jędrzejewski-Szmek
Special care is needed so that we get an error message if the file failed to parse, but not when it is missing. To avoid duplicating the same error check in every caller, add an additional 'warn' boolean to tell config_parse whether a message should be issued. This makes things both shorter and more robust wrt. to error reporting.
2014-07-15Constify ConfigTableItem tablesZbigniew Jędrzejewski-Szmek
2014-04-28conf-parser: Fix typo in commentJonathan Boulle
Fix minor typo in conf parser
2014-03-04Do not print invalid UTF-8 in error messagesZbigniew Jędrzejewski-Szmek
Inexplicably, 550a40ec ('core: do not print invalid utf-8 in error messages') only fixed two paths. Convert all of them now.
2014-03-03conf-parser: config_parse_path_strv() is not generic, so let's move it into ↵Lennart Poettering
load-fragment.c The parse code actually checked for specific lvalue names, which is really wrong for supposedly generic parsers...
2014-03-03core: move config_parse_set_status() into load-fragment.cLennart Poettering
Let's keep specific config parsers close to where they are needed. Only the really generic ones should be defined in conf-parser.[ch].
2014-03-03core: move ShowStatus type into the coreLennart Poettering
Let's make the scope of the show-status stuff a bit smaller, and make it private to the core, rather than shared API in shared/.
2014-03-03conf-parse: rename config_parse_level() to config_parse_log_level()Lennart Poettering
"level" is a bit too generic, let's clarify what kind of level we are referring to here.
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-01-27manager: add systemd.show_status=auto modeZbigniew Jędrzejewski-Szmek
When set to auto, status will shown when the first ephemeral message is shown (a job has been running for five seconds). Then until the boot or shutdown ends, status messages will be shown. No indication about the switch is done: I think it should be clear for the user that first the cylon eye and the ephemeral messages appear, and afterwards messages are displayed. The initial arming of the event source was still wrong, but now should really be fixed.
2013-11-25conf-parser: fix memory realloc errorYin Kangkai
Otherwise there is some memory corruption and undefined behavior, e.g., in my case systemd-udev was always aborted at the _cleanup_freep_ around that code blocks.
2013-11-25conf-parser: distinguish between multiple sections with the same nameTom Gundersen
Pass on the line on which a section was decleared to the parsers, so they can distinguish between multiple sections (if they chose to). Currently no parsers take advantage of this, but a follow-up patch will do that to distinguish [Address] Address=192.168.0.1/24 Label=one [Address] Address=192.168.0.2/24 Label=two from [Address] Address=192.168.0.1/24 Label=one Address=192.168.0.2/24 Label=two
2013-11-08Remove dead code and unexport some callsLennart Poettering
"make check-api-unused" informs us about code that is not used anymore or that is exported but only used internally. Fix these all over the place.
2013-10-29conf-parser: add macro for ENUMVTom Gundersen
Parses a whitespace separated list of strings into a vector of enums.
2013-10-16macro: clean up usage of gcc attributesLennart Poettering
Always use our own macros, and name all our own macros the same style.
2013-04-25conf-parser: restrict .include usageLennart Poettering
Disallow recursive .include, and make it unavailable in anything but unit files.
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-04-03util: rename parse_usec() to parse_sec() sinds the default unit is secondsLennart Poettering
Internally we store all time values in usec_t, however parse_usec() actually was used mostly to parse values in seconds (unless explicit units were specified to define a different unit). Hence, be clear about this and name the function about what we pass into it, not what we get out of it.
2013-02-14bootchart: use conf-parser & CamelCase names in .confThomas Hindoe Paaboel Andersen
2012-08-14service: add options RestartPreventExitStatus and SuccessExitStatusLukas Nykryn
In some cases, like wrong configuration, restarting after error does not help, so administrator can specify statuses by RestartPreventExitStatus which will not cause restart of a service. Sometimes you have non-standart exit status, so this can be specified by SuccessfulExitStatus.
2012-07-19use #pragma once instead of foo*foo #define guardsShawn Landden
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported in other compilers. I've been using and maintaining (rebasing) this patch for a while now, as it annoyed me to see #ifndef fooblahfoo, etc all over the place, almost arrogant about the annoyance of having to define all these names to perform a commen but neccicary functionality, when a completely superior alternative exists. I havn't sent it till now, cause its kindof a style change, and it is bad voodoo to mess with style that has been established by more established editors. So feel free to lambast me as a crazy bafoon. v2 - preserve externally used headers
2012-06-01journal: allow setting of a cutoff log level for disk storage, syslog, kmsg, ↵Lennart Poettering
console forwarding
2012-05-31util: introduce a proper nsec_t and make use of it where appropriateLennart Poettering
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-10util: move all to shared/ and split external dependencies in separate ↵Kay Sievers
internal libraries Before: $ ldd /lib/systemd/systemd-timestamp linux-vdso.so.1 => (0x00007fffb05ff000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f90aac57000) libcap.so.2 => /lib64/libcap.so.2 (0x00007f90aaa53000) librt.so.1 => /lib64/librt.so.1 (0x00007f90aa84a000) libc.so.6 => /lib64/libc.so.6 (0x00007f90aa494000) /lib64/ld-linux-x86-64.so.2 (0x00007f90aae90000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f90aa290000) libattr.so.1 => /lib64/libattr.so.1 (0x00007f90aa08a000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f90a9e6e000) After: $ ldd systemd-timestamp linux-vdso.so.1 => (0x00007fff3cbff000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f5eaa1c3000) librt.so.1 => /lib64/librt.so.1 (0x00007f5ea9fbb000) libc.so.6 => /lib64/libc.so.6 (0x00007f5ea9c04000) /lib64/ld-linux-x86-64.so.2 (0x00007f5eaa3fc000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f5ea9a00000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f5ea97e4000)