path: root/man/journald.conf.xml

<?xml version='1.0'?> <!--*-nxml-*-->
<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
        "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="journald.conf">
        <refentryinfo>
                <title>journald.conf</title>
                <productname>systemd</productname>

                <authorgroup>
                        <author>
                                <contrib>Developer</contrib>
                                <firstname>Lennart</firstname>
                                <surname>Poettering</surname>
                                <email>lennart@poettering.net</email>
                        </author>
                </authorgroup>
        </refentryinfo>

        <refmeta>
                <refentrytitle>journald.conf</refentrytitle>
                <manvolnum>5</manvolnum>
        </refmeta>

        <refnamediv>
                <refname>journald.conf</refname>
                <refpurpose>Journal service configuration file</refpurpose>
        </refnamediv>

        <refsynopsisdiv>
                <para><filename>/etc/systemd/journald.conf</filename></para>
        </refsynopsisdiv>

        <refsect1>
                <title>Description</title>

                <para>This files configures various parameters of the
                systemd journal service
                <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>

        </refsect1>

        <refsect1>
                <title>Options</title>

                <para>All options are configured in the
                <literal>[Journal]</literal> section:</para>

                <variablelist>

                        <varlistentry>
                                <term><varname>Storage=</varname></term>

                                <listitem><para>Controls where to
                                store journal data. One of
                                <literal>volatile</literal>,
                                <literal>persistent</literal>,
                                <literal>auto</literal> and
                                <literal>none</literal>. If
                                <literal>volatile</literal> journal
                                log data will be stored only in
                                memory, i.e. below the
                                <filename>/run/log/journal</filename>
                                hierarchy (which is created if
                                needed). If
                                <literal>persistent</literal> data will
                                be stored preferably on disk,
                                i.e. below the
                                <filename>/var/log/journal</filename>
                                hierarchy (which is created if
                                needed), with a fallback to
                                <filename>/run/log/journal</filename>
                                (which is created if needed), during
                                early boot and if the disk is not
                                writable. <literal>auto</literal> is
                                similar to
                                <literal>persistent</literal> but the
                                directory
                                <filename>/var/log/journal</filename>
                                is not created if needed, so that its
                                existence controls where log data
                                goes. <literal>none</literal> turns
                                off all storage, all log data received
                                will be dropped. Forwarding to other
                                targets, such as the console, the
                                kernel log buffer or a syslog daemon
                                will still work however.  Defaults to
                                <literal>auto</literal>.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>Compress=</varname></term>

                                <listitem><para>Takes a boolean
                                value. If enabled (the default) data
                                objects that shall be stored in the
                                journal and are larger than a certain
                                threshold are compressed with the XZ
                                compression algorithm before they are
                                written to the file
                                system.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>Seal=</varname></term>

                                <listitem><para>Takes a boolean
                                value. If enabled (the default) and a
                                sealing key is available (as created
                                by
                                <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
                                <option>--setup-keys</option>
                                command), forward secure sealing (FSS) for
                                all persistent journal files is
                                enabled.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>SplitMode=</varname></term>

                                <listitem><para>Controls whether to
                                split up journal files per user. One
                                of <literal>login</literal>,
                                <literal>uid</literal> and
                                <literal>none</literal>. If
                                <literal>login</literal> each logged
                                in user will get his own journal
                                files, but systemd user IDs will log
                                into the system journal. If
                                <literal>uid</literal> any user ID
                                will get his own journal files
                                regardless whether it belongs to a
                                system service or refers to a real
                                logged in user. If
                                <literal>none</literal> journal files
                                are not split up per-user and all
                                messages are stored in the single
                                system journal. Note that splitting
                                up journal files per-user is only
                                available of journals are stored
                                persistently. If journals are stored
                                on volatile storage (see above) only a
                                single journal file for all user IDs
                                is kept. Defaults to
                                <literal>login</literal>.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RateLimitInterval=</varname></term>
                                <term><varname>RateLimitBurst=</varname></term>

                                <listitem><para>Configures the rate
                                limiting that is applied to all
                                messages generated on the system. If
                                in the time interval defined by
                                <varname>RateLimitInterval=</varname>
                                more messages than specified in
                                <varname>RateLimitBurst=</varname> are
                                logged by a service all further
                                messages within the interval are
                                dropped, until the interval is over. A
                                message about the number of dropped
                                messages is generated. This rate
                                limiting is applied per-service, so
                                that two services which log do not
                                interfere with each other's
                                limits. Defaults to 200 messages in
                                10s. The time specification for
                                <varname>RateLimitInterval=</varname>
                                may be specified in the following
                                units: <literal>s</literal>,
                                <literal>min</literal>,
                                <literal>h</literal>,
                                <literal>ms</literal>,
                                <literal>us</literal>. To turn off any
                                kind of rate limiting, set either
                                value to 0.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>SystemMaxUse=</varname></term>
                                <term><varname>SystemKeepFree=</varname></term>
                                <term><varname>SystemMaxFileSize=</varname></term>
                                <term><varname>RuntimeMaxUse=</varname></term>
                                <term><varname>RuntimeKeepFree=</varname></term>
                                <term><varname>RuntimeMaxFileSize=</varname></term>

                                <listitem><para>Enforce size limits on
                                the journal files stored. The options
                                prefixed with
                                <literal>System</literal> apply to the
                                journal files when stored on a
                                persistent file system, more
                                specifically
                                <filename>/var/log/journal</filename>. The
                                options prefixed with
                                <literal>Runtime</literal> apply to
                                the journal files when stored on a
                                volatile in-memory file system, more
                                specifically
                                <filename>/run/log/journal</filename>. The
                                former is used only when
                                <filename>/var</filename> is mounted,
                                writable and the directory
                                <filename>/var/log/journal</filename>
                                exists. Otherwise only the latter
                                applies. Note that this means that
                                during early boot and if the
                                administrator disabled persistent
                                logging only the latter options apply,
                                while the former apply if persistent
                                logging is enabled and the system is
                                fully booted
                                up. <varname>SystemMaxUse=</varname>
                                and <varname>RuntimeMaxUse=</varname>
                                control how much disk space the
                                journal may use up at
                                maximum. Defaults to 10% of the size
                                of the respective file
                                system. <varname>SystemKeepFree=</varname>
                                and
                                <varname>RuntimeKeepFree=</varname>
                                control how much disk space the
                                journal shall always leave free for
                                other uses if less than the disk space
                                configured in
                                <varname>SystemMaxUse=</varname> and
                                <varname>RuntimeMaxUse=</varname> is
                                available. Defaults to 15% of the size
                                of the respective file
                                system. <varname>SystemMaxFileSize=</varname>
                                and
                                <varname>RuntimeMaxFileSize=</varname>
                                control how large individual journal
                                files may grow at maximum. This
                                influences the granularity in which
                                disk space is made available through
                                rotation, i.e. deletion of historic
                                data. Defaults to one eighth of the
                                values configured with
                                <varname>SystemMaxUse=</varname> and
                                <varname>RuntimeMaxUse=</varname>, so
                                that usually seven rotated journal
                                files are kept as history. Specify
                                values in bytes or use K, M, G, T, P,
                                E as units for the specified
                                sizes. Note that size limits are
                                enforced synchronously to journal
                                files as they are extended, and need
                                no explicit rotation step triggered by
                                time.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>MaxFileSec=</varname></term>

                                <listitem><para>The maximum time to
                                store entries in a single journal
                                file, before rotating to the next
                                one. Normally time-based rotation
                                should not be required as size-based
                                rotation with options such as
                                <varname>SystemMaxFileSize=</varname>
                                should be sufficient to ensure that
                                journal files don't grow without
                                bounds. However, to ensure that not
                                too much data is lost at once when old
                                journal files are deleted it might
                                make sense to change this value from
                                the default of one month. Set to 0 to
                                turn off this feature. This setting
                                takes time values which may be
                                suffixed with the units year, month,
                                week, day, h, m to override the
                                default time unit of
                                seconds.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>MaxRetentionSec=</varname></term>

                                <listitem><para>The maximum time to
                                store journal entries. This
                                controls whether journal files
                                containing entries older then the
                                specified time span are
                                deleted. Normally time-based deletion
                                of old journal files should not be
                                required as size-based deletion with
                                options such as
                                <varname>SystemMaxUse=</varname>
                                should be sufficient to ensure that
                                journal files don't grow without
                                bounds. However, to enforce data
                                retention policies it might make sense
                                to change this value from the
                                default of 0 (which turns off this
                                feature). This setting also takes
                                time values which may be suffixed with
                                the units year, month, week, day, h, m
                                to override the default time unit of
                                seconds. </para></listitem>
                        </varlistentry>


                        <varlistentry>
                                <term><varname>SyncIntervalSec=</varname></term>

                                <listitem><para>The timeout before syncing journal
                                data to disk. After syncing journal files have
                                OFFLINE state. Default timeout is 5 minutes.
                                </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>ForwardToSyslog=</varname></term>
                                <term><varname>ForwardToKMsg=</varname></term>
                                <term><varname>ForwardToConsole=</varname></term>

                                <listitem><para>Control whether log
                                messages received by the journal
                                daemon shall be forwarded to a
                                traditional syslog daemon, to the
                                kernel log buffer (kmsg), or to the
                                system console. These options take
                                boolean arguments. If forwarding to
                                syslog is enabled but no syslog daemon
                                is running the respective option has
                                no effect. By default only forwarding
                                to syslog is enabled. These settings
                                may be overridden at boot time with
                                the kernel command line options
                                <literal>systemd.journald.forward_to_syslog=</literal>,
                                <literal>systemd.journald.forward_to_kmsg=</literal>
                                and
                                <literal>systemd.journald.forward_to_console=</literal>.
                                </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>MaxLevelStore=</varname></term>
                                <term><varname>MaxLevelSyslog=</varname></term>
                                <term><varname>MaxLevelKMsg=</varname></term>
                                <term><varname>MaxLevelConsole=</varname></term>

                                <listitem><para>Controls the maximum
                                log level of messages that are stored
                                on disk, forwarded to syslog, kmsg or
                                the console (if that is enabled, see
                                above). As argument, takes one of
                                <literal>emerg</literal>,
                                <literal>alert</literal>,
                                <literal>crit</literal>,
                                <literal>err</literal>,
                                <literal>warning</literal>,
                                <literal>notice</literal>,
                                <literal>info</literal>,
                                <literal>debug</literal> or integer
                                values in the range of 0..7 (corresponding
                                to the same levels). Messages equal or below
                                the log level specified are
                                stored/forwarded, messages above are
                                dropped. Defaults to
                                <literal>debug</literal> for
                                <varname>MaxLevelStore=</varname> and
                                <varname>MaxLevelSyslog=</varname>, to
                                ensure that the all messages are
                                written to disk and forwarded to
                                syslog. Defaults to
                                <literal>notice</literal> for
                                <varname>MaxLevelKMsg=</varname> and
                                <literal>info</literal> for
                                <varname>MaxLevelConsole=</varname>.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>TTYPath=</varname></term>

                                <listitem><para>Change the console TTY
                                to use if
                                <varname>ForwardToConsole=yes</varname>
                                is used. Defaults to
                                <filename>/dev/console</filename>.</para></listitem>
                        </varlistentry>

                </variablelist>

        </refsect1>

        <refsect1>
                  <title>See Also</title>
                  <para>
                          <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                  </para>
        </refsect1>

</refentry>