Fri May 4 20:00:31 UTC 2012

6 files changed, 0 insertions, 593 deletions

diff --git a/community-testing/multipath-tools/PKGBUILD b/community-testing/multipath-tools/PKGBUILD
deleted file mode 100644
index 267d1c27b..000000000
--- a/community-testing/multipath-tools/PKGBUILD
+++ /dev/null
@@ -1,44 +0,0 @@
-# $Id: PKGBUILD 68770 2012-04-01 19:51:20Z dreisner $
-# Maintainer:
-# Contributor: Thomas S Hatch <thatch45 ar gmail dot com>
-# Contributor: Michael P <ptchinster@archlinux.us>
-# Contributor: Matt Heagney <matt@heagney.com>
-
-pkgname=multipath-tools
-pkgver=0.4.9
-pkgrel=6
-pkgdesc="Multipath Tools For Linux"
-arch=('i686' 'x86_64')
-url="http://christophe.varoqui.free.fr/"
-license=('GPL')
-depends=('libaio' 'device-mapper')
-backup=('etc/multipath.conf' 'etc/multipath.conf.annotated')
-install=multipath-tools.install
-options=('!emptydirs')
-source=("http://christophe.varoqui.free.fr/multipath-tools/$pkgname-$pkgver.tar.bz2"
-        "multipath.conf" "multipath.conf.annotated" "multipathd.rc" 'fix-build.patch')
-md5sums=('a6d4b48afc28f1f50f5ee4b1b06d2765'
-         '9324ff0ba8330dcb21b2fcf64988026f'
-         'be11462922eeeb9fcd2ba5f3f137b7d9'
-         '7c04ef96441363b0d43a2ebb13a87659'
-         '2576fc535d7fa767837b1c7827013e52')
-
-build() {
-  patch -p1 -i fix-build.patch
-
-  sed -i 's|etc/udev|usr/lib/udev|g' multipath/Makefile kpartx/Makefile
-  sed -i 's|/sbin/|/usr/bin/|g' kpartx/kpartx.rules
-  
-  # Needs to be fixed upstream. Refer to
-  # https://bbs.archlinux.org/viewtopic.php?pid=793814#p793814
-  export LDFLAGS=${LDFLAGS/-Wl,--as-needed}
-  
-  make
-}
-
-package() {
-  make LIB="usr/lib" DESTDIR="$pkgdir" bindir="/usr/bin" libudevdir="/usr/lib/udev" install
-  install -D -m 644 multipath.conf "$pkgdir"/etc/multipath.conf
-  install -D -m 644 multipath.conf.annotated "$pkgdir"/etc/multipath.conf.annotated
-  install -D -m 755 multipathd.rc "$pkgdir"/etc/rc.d/multipathd
-}
diff --git a/community-testing/multipath-tools/fix-build.patch b/community-testing/multipath-tools/fix-build.patch
deleted file mode 100644
index c6196f73b..000000000
--- a/community-testing/multipath-tools/fix-build.patch
+++ /dev/null
@@ -1,140 +0,0 @@
---- multipath-tools-0.4.9.orig/kpartx/Makefile	2010-05-22 05:01:58.000000000 -0700
-+++ multipath-tools-0.4.9/kpartx/Makefile	2010-11-28 12:14:25.763531104 -0800
-@@ -6,7 +6,7 @@
- 
- CFLAGS += -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
- 
--LDFLAGS = -ldevmapper
-+LIBS = -ldevmapper
- OBJS = bsd.o dos.o kpartx.o solaris.o unixware.o dasd.o sun.o \
-        gpt.o mac.o crc32.o lopart.o xstrncpy.o devmapper.o
- EXEC = kpartx
-@@ -14,8 +14,7 @@
- all: $(EXEC)
- 
- $(EXEC): $(OBJS)
--	$(CC) $(OBJS) -o $(EXEC) $(LDFLAGS)
--	$(GZIP) $(EXEC).8 > $(EXEC).8.gz
-+	$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) -o $(EXEC)
- 	
- install: $(EXEC) $(EXEC).8
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
-@@ -23,13 +22,14 @@
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(libudevdir)
- 	$(INSTALL_PROGRAM) -m 755 kpartx_id $(DESTDIR)$(libudevdir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)/etc/udev/rules.d
--	$(INSTALL_PROGRAM) -m 644 kpartx.rules $(DESTDIR)/etc/udev/rules.d/
-+	$(INSTALL_PROGRAM) -m 644 kpartx.rules $(DESTDIR)/etc/udev/rules.d/66-kpartx.rules
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
--	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
-+	$(INSTALL_PROGRAM) -m 644 $(EXEC).8 $(DESTDIR)$(mandir)
- 
- uninstall:
- 	rm -f $(DESTDIR)$(bindir)/$(EXEC)
--	rm -f $(DESTDIR)$(mandir)/$(EXEC).8.gz
-+	rm -f $(DESTDIR)$(mandir)/$(EXEC).8
-+	rm -f $(DESTDIR)/etc/udev/rules.d/66-kpartx.rules
- 
- clean:
--	rm -f core *.o $(EXEC) *.gz
-+	rm -f core *.o $(EXEC)
---- multipath-tools-0.4.9.orig/Makefile.inc	2010-05-22 05:01:58.000000000 -0700
-+++ multipath-tools-0.4.9/Makefile.inc	2010-11-28 12:14:25.763531104 -0800
-@@ -32,11 +32,10 @@
- syslibdir   = $(prefix)/$(LIB)
- libdir	    = $(prefix)/$(LIB)/multipath
- 
--GZIP        = /bin/gzip -9 -c
- INSTALL_PROGRAM = install
- 
--OPTFLAGS     = -pipe -g -Wall -Wunused -Wstrict-prototypes
--CFLAGS	     = $(OPTFLAGS) -fPIC -DLIB_STRING=\"${LIB}\"
-+OPTFLAGS     = -Wall -Wunused -Wstrict-prototypes
-+CFLAGS	     += $(OPTFLAGS) -fPIC -DLIB_STRING=\"${LIB}\"
- SHARED_FLAGS = -shared
- 
- %.o:	%.c
---- multipath-tools-0.4.9.orig/multipath/Makefile	2010-05-22 05:01:58.000000000 -0700
-+++ multipath-tools-0.4.9/multipath/Makefile	2010-11-28 12:14:46.718697048 -0800
-@@ -7,32 +7,30 @@
- OBJS = main.o
- 
- CFLAGS += -I$(multipathdir)
--LDFLAGS += -lpthread -ldevmapper -ldl -lmultipath -L$(multipathdir)
-+LIBS = -lpthread -ldevmapper -ldl -L$(multipathdir) -lmultipath
- 
- EXEC = multipath
- 
- all: $(EXEC)
- 
- $(EXEC): $(OBJS)
--	$(CC) $(CFLAGS) $(OBJS) -o $(EXEC) $(LDFLAGS)
--	$(GZIP) $(EXEC).8 > $(EXEC).8.gz
--	$(GZIP) $(EXEC).conf.5 > $(EXEC).conf.5.gz
-+	$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) -o $(EXEC)
- 
- install:
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)/etc/udev/rules.d
--	$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)/etc/udev/rules.d/
-+	$(INSTALL_PROGRAM) -m 644 multipath.rules $(DESTDIR)/etc/udev/rules.d/65-multipath.rules
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
--	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
-+	$(INSTALL_PROGRAM) -m 644 $(EXEC).8 $(DESTDIR)$(mandir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir)
--	$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir)
-+	$(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5 $(DESTDIR)$(man5dir)
- 
- uninstall:
--	rm $(DESTDIR)/etc/udev/rules.d/multipath.rules
--	rm $(DESTDIR)$(bindir)/$(EXEC)
--	rm $(DESTDIR)$(mandir)/$(EXEC).8.gz
--	rm $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz
-+	rm -f $(DESTDIR)/etc/udev/rules.d/65-multipath.rules
-+	rm -f $(DESTDIR)$(bindir)/$(EXEC)
-+	rm -f $(DESTDIR)$(mandir)/$(EXEC).8
-+	rm -f $(DESTDIR)$(man5dir)/$(EXEC).conf.5
- 
- clean:
--	rm -f core *.o $(EXEC) *.gz
-+	rm -f core *.o $(EXEC)
---- multipath-tools-0.4.9.orig/multipathd/Makefile	2010-05-22 05:01:58.000000000 -0700
-+++ multipath-tools-0.4.9/multipathd/Makefile	2010-11-28 12:15:46.624171566 -0800
-@@ -6,8 +6,8 @@
- # basic flags setting
- #
- CFLAGS += -I$(multipathdir)
--LDFLAGS += -lpthread -ldevmapper -lreadline -lncurses -ldl \
--	   -lmultipath -L$(multipathdir)
-+LIBS = -lpthread -ldevmapper -lreadline -lncurses -ldl \
-+	   -L$(multipathdir) -lmultipath
- 
- #
- # debuging stuff
-@@ -28,21 +28,20 @@
- all : $(EXEC)
- 
- $(EXEC): $(OBJS)
--	$(CC) $(CFLAGS) $(LDFLAGS) -o $(EXEC) $(OBJS)
--	$(GZIP) $(EXEC).8 > $(EXEC).8.gz
-+	$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) -o $(EXEC)
- 
- install:
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(rcdir)
- 	$(INSTALL_PROGRAM) -d $(DESTDIR)$(mandir)
--	$(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir)
-+	$(INSTALL_PROGRAM) -m 644 $(EXEC).8 $(DESTDIR)$(mandir)
- 
- uninstall:
- 	rm -f $(DESTDIR)$(bindir)/$(EXEC)
- 	rm -f $(DESTDIR)$(rcdir)/$(EXEC)
--	rm -f $(DESTDIR)$(mandir)/$(EXEC).8.gz
-+	rm -f $(DESTDIR)$(mandir)/$(EXEC).8
- 
- clean:
--	rm -f core *.o $(EXEC) *.gz
-+	rm -f core *.o $(EXEC)
- 
diff --git a/community-testing/multipath-tools/multipath-tools.install b/community-testing/multipath-tools/multipath-tools.install
deleted file mode 100644
index fa58bbc35..000000000
--- a/community-testing/multipath-tools/multipath-tools.install
+++ /dev/null
@@ -1,4 +0,0 @@
-post_install() {
-
-    echo " * For full functonality ensure that the dm_multipath kernel module is loaded"
-}
diff --git a/community-testing/multipath-tools/multipath.conf b/community-testing/multipath-tools/multipath.conf
deleted file mode 100644
index 6dacf093d..000000000
--- a/community-testing/multipath-tools/multipath.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Very Basic Multipath Configuration File
-#
-
-defaults {
-	getuid_callout "/usr/lib/udev/scsi_id -g -u -d /dev/%n"
-}
-
diff --git a/community-testing/multipath-tools/multipath.conf.annotated b/community-testing/multipath-tools/multipath.conf.annotated
deleted file mode 100644
index b79488413..000000000
--- a/community-testing/multipath-tools/multipath.conf.annotated
+++ /dev/null
@@ -1,362 +0,0 @@
-##
-## This is a template multipath-tools configuration file
-## Uncomment the lines relevent to your environment
-##
-#
-##
-## name  : defaults
-## desc  : multipath-tools default settings
-##
-#defaults {
-#	#
-#	# name    : udev_dir
-#	# desc    : directory where udev creates its device nodes
-#	# default : /dev
-#	#
-#	udev_dir	/dev
-#
-#	#
-#	# name    : polling_interval
-#	# scope   : multipathd
-#	# desc    : interval between two path checks in seconds
-#	# default : 5
-#	#
-#	polling_interval 10
-#
-#	#
-#	# name    : selector
-#	# scope   : multipath
-#	# desc    : the default path selector algorithm to use
-#	#           these algorithms are offered by the kernel multipath target
-#	# values  : "round-robin 0"
-#	# default : "round-robin 0"
-#	#
-#	selector	"round-robin 0"
-#
-#	#
-#	# name    : path_grouping_policy
-#	# scope   : multipath
-#	# desc    : the default path grouping policy to apply to unspecified
-#	#           multipaths
-#	# default : multibus
-#	#
-#	path_grouping_policy	multibus
-#
-#	#
-#	# name    : getuid_callout
-#	# scope   : multipath
-#	# desc    : the default program and args to callout to obtain a unique 
-#	#           path identifier. Absolute path required
-#	# default : /usr/lib/udev/scsi_id -g -u -s
-#	#
-#	getuid_callout	"/usr/lib/udev/scsi_id -g -u -s /block/%n"
-#
-#	#
-#	# name    : prio_callout
-#	# scope   : multipath
-#	# desc    : the default program and args to callout to obtain a path 
-#	#           priority value. The ALUA bits in SPC-3 provide an
-#	#           exploitable prio value for example. "none" is a valid value
-#	# default : (null)
-#	#
-#	#prio_callout	"/bin/true"
-#
-#	#
-#	# name    : path_checker
-#	# scope   : multipath & multipathd
-#	# desc    : the default method used to determine the paths' state
-#	# values  : readsector0|tur|emc_clariion|hp_sw|directio
-#	# default : directio
-#	#
-#	#path_checker	directio
-#
-#	#
-#	# name    : rr_min_io
-#	# scope   : multipath
-#	# desc    : the number of IO to route to a path before switching
-#	#           to the next in the same path group
-#	# default : 1000
-#	#
-#	rr_min_io	100
-#
-#	#
-#	# name    : rr_weight
-#	# scope   : multipath
-#	# desc    : if set to priorities the multipath configurator will assign
-#	#	    path weights as "path prio * rr_min_io"
-#	# values  : priorities|uniform
-#	# default : uniform
-#	#
-#	rr_weight	priorities
-#
-#	#
-#	# name    : failback
-#	# scope   : multipathd
-#	# desc    : tell the daemon to manage path group failback, or not to.
-#	#	    0 means immediate failback, values >0 means deffered failback
-#	#	    expressed in seconds.
-#	# values  : manual|immediate|n > 0
-#	# default : immediate
-#	#
-#	failback	manual
-#
-#	#
-#	# name    : no_path_retry
-#	# scope   : multipath & multipathd
-#	# desc    : tell the number of retries until disable queueing, or
-#	#           "fail" means immediate failure (no queueing),
-#	#           "queue" means never stop queueing
-#	# values  : queue|fail|n (>0)
-#	# default : (null)
-#	#
-#	#no_path_retry  queue
-#
-#	#
-#	# name    : user_friendly_names
-#	# scope   : multipath
-#	# desc    : If set to "yes", using the bindings file
-#	#           /var/lib/multipath/bindings to assign a persistent and
-#	#           unique alias to the multipath, in the form of mpath<n>.
-#	#           If set to "no" use the WWID as the alias. In either case
-#	#           this be will be overriden by any specific aliases in this
-#	#           file.
-#	# values  : yes|no
-#	# default : no
-#	user_friendly_names no
-#
-#}
-#	
-##
-## name    : blacklist
-## scope   : multipath & multipathd
-## desc    : list of device names to discard as not multipath candidates
-## default : cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop
-##
-#blacklist {
-#       wwid 26353900f02796769
-#	devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
-#	devnode "^hd[a-z][[0-9]*]"
-#	devnode "^cciss!c[0-9]d[0-9]*[p[0-9]*]"
-#       device {
-#               vendor DEC.*
-#               product MSA[15]00
-#       }
-#}
-##
-## name    : blacklist_exceptions
-## scope   : multipath & multipathd
-## desc    : list of device names to be treated as multipath candidates
-##           even if they are on the blacklist.
-##           Note: blacklist exceptions are only valid in the same class.
-##           It is not possible to blacklist devices using the devnode keyword
-##           and to exclude some devices of them using the wwid keyword.
-## default : -
-##
-#blacklist_exceptions {
-#       devnode "^dasd[c-d]+[0-9]*"
-#       wwid    "IBM.75000000092461.4d00.34"
-#       wwid    "IBM.75000000092461.4d00.35"
-#       wwid    "IBM.75000000092461.4d00.36"
-#}
-#
-##
-## name    : multipaths
-## scope   : multipath & multipathd
-## desc    : list of multipaths finest-grained settings
-##
-#multipaths {
-#	#
-#	# name  : multipath
-#	# scope : multipath & multipathd
-#	# desc  : container for settings that apply to one specific multipath
-#	#
-#	multipath {
-#		#
-#		# name  : wwid
-#		# scope : multipath & multipathd
-#		# desc  : index of the container
-#		#
-#		wwid			3600508b4000156d700012000000b0000
-#
-#		#
-#		# name    : alias
-#		# scope   : multipath
-#		# desc    : symbolic name for the multipath
-#		#
-#		alias			yellow
-#
-#		#
-#		# name    : path_grouping_policy
-#		# scope   : multipath
-#		# desc    : path grouping policy to apply to this multipath
-#		# values  : failover, multibus, group_by_serial
-#		# default : failover
-#		#
-#		path_grouping_policy	multibus
-#
-#		#
-#		# name    : path_checker
-#		# scope   : multipathd
-#		# desc    : path checking alorithm to use to check path state
-#		# values  : readsector0|tur|emc_clariion|hp_sw|directio
-#		# default : directio
-#		#
-#		# path_checker		directio
-#		
-#		#
-#		# name    : path_selector
-#		# desc    : the path selector algorithm to use for this mpath
-#		#           these algo are offered by the kernel mpath target
-#		# values  : "round-robin 0"
-#		# default : "round-robin 0"
-#		#
-#		path_selector		"round-robin 0"
-#
-#		#
-#		# name    : failback
-#		# scope   : multipathd
-#		# desc    : tell the daemon to manage path group failback, or not to.
-#		#	    0 means immediate failback, values >0 means deffered failback
-#		#	    expressed in seconds.
-#		# values  : manual|immediate|n > 0
-#		# default : immediate
-#		#
-#		failback		manual
-#
-#		#
-#		# name    : no_path_retry
-#		# scope   : multipath & multipathd
-#		# desc    : tell the number of retries until disable queueing, or
-#		#           "fail" means immediate failure (no queueing),
-#		#           "queue" means never stop queueing
-#		# values  : queue|fail|n (>0)
-#		# default : (null)
-#		#
-#		#no_path_retry  queue
-#
-#		#
-#		# name    : rr_min_io
-#		# scope   : multipath
-#		# desc    : the number of IO to route to a path before switching
-#		#           to the next in the same path group
-#		# default : 1000
-#		#
-#		rr_min_io	100
-#	}
-#	multipath {
-#		wwid	1DEC_____321816758474
-#		alias	red
-#		rr_weight		priorities
-#	}
-#}
-#
-##
-## name  : devices
-## scope : multipath & multipathd
-## desc  : list of per storage controller settings
-##	  overrides default settings (device_maps block)
-##         overriden by per multipath settings (multipaths block)
-##
-#devices {
-#	#
-#	# name  : device
-#	# scope : multipath & multipathd
-#	# desc  : settings for this specific storage controller
-#	#
-#	device {
-#		#
-#		# name  : vendor, product
-#		# scope : multipath & multipathd
-#		# desc  : index for the block
-#		#
-#		vendor			"COMPAQ  "
-#		product			"HSV110 (C)COMPAQ"
-#
-#		#
-#		# name    : path_grouping_policy
-#		# scope   : multipath
-#		# desc    : path grouping policy to apply to multipath hosted
-#		#           by this storage controller
-#		# values  : failover        = 1 path per priority group
-#		#           multibus        = all valid paths in 1 priority
-#		#                             group
-#		#           group_by_serial = 1 priority group per detected
-#		#                             serial number
-#		# default : failover
-#		#
-#		path_grouping_policy	multibus
-#
-#		#
-#		# name    : getuid_callout
-#		# scope   : multipath
-#		# desc    : the program and args to callout to obtain a unique 
-#		#           path identifier. Absolute path required
-#		# default : /usr/lib/udev/scsi_id -g -u -s
-#		#
-#		getuid_callout          "/usr/lib/udev/scsi_id -g -u -s /block/%n"
-#
-#		#
-#		# name    : prio_callout
-#		# scope   : multipath
-#		# desc    : the program and args to callout to obtain a path 
-#		#           weight. Weights are summed for each path group to
-#		#	    determine the next PG to use case of failure.
-#		#	    "none" is a valid value.
-#		# default : no callout, all paths equals
-#		#
-#		prio_callout          "/sbin/mpath_prio_balance_units %d"
-#
-#		#
-#		# name    : path_checker
-#		# scope   : multipathd
-#		# desc    : path checking alorithm to use to check path state
-#		# values  : readsector0|tur|emc_clariion|hp_sw|directio
-#		# default : directio
-#		#
-#		path_checker		directio
-#
-#		#
-#		# name    : path_selector
-#		# desc    : the path selector algorithm to use for this mpath
-#		#           these algo are offered by the kernel mpath target
-#		# values  : "round-robin 0"
-#		# default : "round-robin 0"
-#		#
-#		path_selector		"round-robin 0"
-#
-#		#
-#		# name    : failback
-#		# scope   : multipathd
-#		# desc    : tell the daemon to manage path group failback, or not to.
-#		#	    0 means immediate failback, values >0 means deffered failback
-#		#	    expressed in seconds.
-#		# values  : manual|immediate|n > 0
-#		# default : immediate
-#		#
-#		failback		30
-#
-#		#
-#		# name    : rr_min_io
-#		# scope   : multipath
-#		# desc    : the number of IO to route to a path before switching
-#		#           to the next in the same path group
-#		# default : 1000
-#		#
-#		rr_min_io	100
-#
-#		#
-#		# name    : product_blacklist
-#		# scope   : multipath & multipathd
-#		# desc    : product strings to blacklist for this vendor
-#		# default : none
-#		#
-#		product_blacklist	LUN_Z
-#	}
-#	device {
-#		vendor			"COMPAQ  "
-#		product			"MSA1000         "
-#		path_grouping_policy	multibus
-#		path_checker		tur
-#		rr_weight		priorities
-#	}
-#}
diff --git a/community-testing/multipath-tools/multipathd.rc b/community-testing/multipath-tools/multipathd.rc
deleted file mode 100644
index 7f5ef5d6a..000000000
--- a/community-testing/multipath-tools/multipathd.rc
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/bash
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-case "$1" in
-  start)
-    stat_busy "Starting multipathd"
-    /usr/bin/multipathd
-    if [ $? -gt 0 ]; then
-      stat_fail
-    else
-      add_daemon multipathd
-      stat_done
-    fi
-    ;;
-  stop)
-    stat_busy "Stopping multipathd"
-    [ -f /var/run/multipathd.pid ] && kill `cat /var/run/multipathd.pid` >/dev/null 2>&1 
-      if [ $? -gt 0 ]; then
-        stat_fail
-      else
-        rm_daemon multipathd
-        stat_done
-      fi 
-      ;;
-  restart)
-    $0 stop
-    sleep 2
-    $0 start
-    ;;
-  *)
-    echo "usage: $0 {start|stop|restart}"  
-esac
-exit 0