Mon May 2 00:29:22 UTC 2011

19 files changed, 0 insertions, 1174 deletions

diff --git a/community/cherrypy/837.2049.patch b/community/cherrypy/837.2049.patch
deleted file mode 100644
index 20cc0dd36..000000000
--- a/community/cherrypy/837.2049.patch
+++ /dev/null
@@ -1,554 +0,0 @@
-Index: cherrypy/test/test_tools.py
-===================================================================
---- cherrypy/test/test_tools.py	(revision 2049)
-+++ cherrypy/test/test_tools.py	(working copy)
-@@ -3,6 +3,7 @@
- import gzip
- import StringIO
- import sys
-+from httplib import IncompleteRead
- import time
- timeout = 0.2
- 
-@@ -272,8 +273,12 @@
-             # Because this error is raised after the response body has
-             # started, and because it's chunked output, an error is raised by
-             # the HTTP client when it encounters incomplete output.
--            self.assertRaises(ValueError, self.getPage,
--                              "/demo/errinstream?id=5")
-+            if sys.version_info[:2] >= (2, 6):
-+                self.assertRaises(IncompleteRead, self.getPage,
-+                                  "/demo/errinstream?id=5")
-+            else:
-+                self.assertRaises(ValueError, self.getPage,
-+                                  "/demo/errinstream?id=5")
-         # If this fails, then on_end_request isn't being called at all.
-         time.sleep(0.1)
-         self.getPage("/demo/ended/5")
-Index: cherrypy/test/webtest.py
-===================================================================
---- cherrypy/test/webtest.py	(revision 2049)
-+++ cherrypy/test/webtest.py	(working copy)
-@@ -491,7 +491,7 @@
-                     # IN6ADDR_ANY, which should respond on localhost.
-                     host = "::1"
-                 conn = http_conn(host, port)
--            
-+
-             conn._http_vsn_str = protocol
-             conn._http_vsn = int("".join([x for x in protocol if x.isdigit()]))
-             
-Index: cherrypy/test/test_encoding.py
-===================================================================
---- cherrypy/test/test_encoding.py	(revision 2049)
-+++ cherrypy/test/test_encoding.py	(working copy)
-@@ -1,7 +1,9 @@
- from cherrypy.test import test
- test.prefer_parent_path()
- 
-+import sys
- import gzip, StringIO
-+from httplib import IncompleteRead
- import cherrypy
- europoundUnicode = u'\x80\xa3'
- europoundUtf8 = u'\x80\xa3'.encode('utf-8')
-@@ -160,10 +162,13 @@
-         else:
-             # The wsgiserver will simply stop sending data, and the HTTP client
-             # will error due to an incomplete chunk-encoded stream.
--            self.assertRaises(ValueError, self.getPage, '/gzip/noshow_stream',
--                              headers=[("Accept-Encoding", "gzip")])
-+            if sys.version_info[:2] >= (2, 6):
-+                self.assertRaises(IncompleteRead, self.getPage, '/gzip/noshow_stream',
-+                                  headers=[("Accept-Encoding", "gzip")])
-+            else:
-+                self.assertRaises(ValueError, self.getPage, '/gzip/noshow_stream',
-+                                  headers=[("Accept-Encoding", "gzip")])
- 
--
- if __name__ == "__main__":
-     setup_server()
-     helper.testmain()
-Index: cherrypy/test/test_core.py
-===================================================================
---- cherrypy/test/test_core.py	(revision 2049)
-+++ cherrypy/test/test_core.py	(working copy)
-@@ -7,6 +7,7 @@
- localDir = os.path.dirname(__file__)
- import sys
- import types
-+from httplib import IncompleteRead
- 
- import cherrypy
- from cherrypy import _cptools, tools
-@@ -760,8 +761,12 @@
-             else:
-                 # Under HTTP/1.1, the chunked transfer-coding is used.
-                 # The HTTP client will choke when the output is incomplete.
--                self.assertRaises(ValueError, self.getPage,
--                                  "/error/page_streamed")
-+                if sys.version_info[:2] >= (2, 6):
-+                    self.assertRaises(IncompleteRead, self.getPage,
-+                                      "/error/page_streamed")
-+                else:
-+                    self.assertRaises(ValueError, self.getPage,
-+                                      "/error/page_streamed")
-             
-             # No traceback should be present
-             self.getPage("/error/cause_err_in_finalize")
-Index: cherrypy/wsgiserver/__init__.py
-===================================================================
---- cherrypy/wsgiserver/__init__.py	(revision 2049)
-+++ cherrypy/wsgiserver/__init__.py	(working copy)
-@@ -713,148 +713,325 @@
-     """Exception raised when the SSL implementation signals a fatal alert."""
-     pass
- 
-+if sys.version_info[:2] >= (2, 6) or sys.version_info[:3] >= (2, 5, 2):
-+    class CP_fileobject(socket._fileobject):
-+        """Faux file object attached to a socket object."""
- 
--class CP_fileobject(socket._fileobject):
--    """Faux file object attached to a socket object."""
--    
--    def sendall(self, data):
--        """Sendall for non-blocking sockets."""
--        while data:
--            try:
--                bytes_sent = self.send(data)
--                data = data[bytes_sent:]
--            except socket.error, e:
--                if e.args[0] not in socket_errors_nonblocking:
--                    raise
--    
--    def send(self, data):
--        return self._sock.send(data)
--    
--    def flush(self):
--        if self._wbuf:
--            buffer = "".join(self._wbuf)
--            self._wbuf = []
--            self.sendall(buffer)
--    
--    def recv(self, size):
--        while True:
--            try:
--                return self._sock.recv(size)
--            except socket.error, e:
--                if e.args[0] not in socket_errors_nonblocking:
--                    raise
--    
--    def read(self, size=-1):
--        if size < 0:
--            # Read until EOF
--            buffers = [self._rbuf]
--            self._rbuf = ""
--            if self._rbufsize <= 1:
--                recv_size = self.default_bufsize
-+        def sendall(self, data):
-+            """Sendall for non-blocking sockets."""
-+            while data:
-+                try:
-+                    bytes_sent = self.send(data)
-+                    data = data[bytes_sent:]
-+                except socket.error, e:
-+                    if e.args[0] not in socket_errors_nonblocking:
-+                        raise
-+
-+        def send(self, data):
-+            return self._sock.send(data)
-+
-+        def flush(self):
-+            if self._wbuf:
-+                buffer = "".join(self._wbuf)
-+                self._wbuf = []
-+                self.sendall(buffer)
-+
-+        def recv(self, size):
-+            while True:
-+                try:
-+                    return self._sock.recv(size)
-+                except socket.error, e:
-+                    if e.args[0] not in socket_errors_nonblocking:
-+                        raise
-+
-+        def read(self, size=-1):
-+            # Use max, disallow tiny reads in a loop as they are very inefficient.
-+            # We never leave read() with any leftover data from a new recv() call
-+            # in our internal buffer.
-+            rbufsize = max(self._rbufsize, self.default_bufsize)
-+            # Our use of StringIO rather than lists of string objects returned by
-+            # recv() minimizes memory usage and fragmentation that occurs when
-+            # rbufsize is large compared to the typical return value of recv().
-+            buf = self._rbuf
-+            buf.seek(0, 2)  # seek end
-+            if size < 0:
-+                # Read until EOF
-+                self._rbuf = StringIO.StringIO()  # reset _rbuf.  we consume it via buf.
-+                while True:
-+                    data = self.recv(rbufsize)
-+                    if not data:
-+                        break
-+                    buf.write(data)
-+                return buf.getvalue()
-             else:
--                recv_size = self._rbufsize
--            
-+                # Read until size bytes or EOF seen, whichever comes first
-+                buf_len = buf.tell()
-+                if buf_len >= size:
-+                    # Already have size bytes in our buffer?  Extract and return.
-+                    buf.seek(0)
-+                    rv = buf.read(size)
-+                    self._rbuf = StringIO.StringIO()
-+                    self._rbuf.write(buf.read())
-+                    return rv
-+
-+                self._rbuf = StringIO.StringIO()  # reset _rbuf.  we consume it via buf.
-+                while True:
-+                    left = size - buf_len
-+                    # recv() will malloc the amount of memory given as its
-+                    # parameter even though it often returns much less data
-+                    # than that.  The returned data string is short lived
-+                    # as we copy it into a StringIO and free it.  This avoids
-+                    # fragmentation issues on many platforms.
-+                    data = self.recv(left)
-+                    if not data:
-+                        break
-+                    n = len(data)
-+                    if n == size and not buf_len:
-+                        # Shortcut.  Avoid buffer data copies when:
-+                        # - We have no data in our buffer.
-+                        # AND
-+                        # - Our call to recv returned exactly the
-+                        #   number of bytes we were asked to read.
-+                        return data
-+                    if n == left:
-+                        buf.write(data)
-+                        del data  # explicit free
-+                        break
-+                    assert n <= left, "recv(%d) returned %d bytes" % (left, n)
-+                    buf.write(data)
-+                    buf_len += n
-+                    del data  # explicit free
-+                    #assert buf_len == buf.tell()
-+                return buf.getvalue()
-+
-+        def readline(self, size=-1):
-+            buf = self._rbuf
-+            buf.seek(0, 2)  # seek end
-+            if buf.tell() > 0:
-+                # check if we already have it in our buffer
-+                buf.seek(0)
-+                bline = buf.readline(size)
-+                if bline.endswith('\n') or len(bline) == size:
-+                    self._rbuf = StringIO.StringIO()
-+                    self._rbuf.write(buf.read())
-+                    return bline
-+                del bline
-+            if size < 0:
-+                # Read until \n or EOF, whichever comes first
-+                if self._rbufsize <= 1:
-+                    # Speed up unbuffered case
-+                    buf.seek(0)
-+                    buffers = [buf.read()]
-+                    self._rbuf = StringIO.StringIO()  # reset _rbuf.  we consume it via buf.
-+                    data = None
-+                    recv = self.recv
-+                    while data != "\n":
-+                        data = recv(1)
-+                        if not data:
-+                            break
-+                        buffers.append(data)
-+                    return "".join(buffers)
-+
-+                buf.seek(0, 2)  # seek end
-+                self._rbuf = StringIO.StringIO()  # reset _rbuf.  we consume it via buf.
-+                while True:
-+                    data = self.recv(self._rbufsize)
-+                    if not data:
-+                        break
-+                    nl = data.find('\n')
-+                    if nl >= 0:
-+                        nl += 1
-+                        buf.write(data[:nl])
-+                        self._rbuf.write(data[nl:])
-+                        del data
-+                        break
-+                    buf.write(data)
-+                return buf.getvalue()
-+            else:
-+                # Read until size bytes or \n or EOF seen, whichever comes first
-+                buf.seek(0, 2)  # seek end
-+                buf_len = buf.tell()
-+                if buf_len >= size:
-+                    buf.seek(0)
-+                    rv = buf.read(size)
-+                    self._rbuf = StringIO.StringIO()
-+                    self._rbuf.write(buf.read())
-+                    return rv
-+                self._rbuf = StringIO.StringIO()  # reset _rbuf.  we consume it via buf.
-+                while True:
-+                    data = self.recv(self._rbufsize)
-+                    if not data:
-+                        break
-+                    left = size - buf_len
-+                    # did we just receive a newline?
-+                    nl = data.find('\n', 0, left)
-+                    if nl >= 0:
-+                        nl += 1
-+                        # save the excess data to _rbuf
-+                        self._rbuf.write(data[nl:])
-+                        if buf_len:
-+                            buf.write(data[:nl])
-+                            break
-+                        else:
-+                            # Shortcut.  Avoid data copy through buf when returning
-+                            # a substring of our first recv().
-+                            return data[:nl]
-+                    n = len(data)
-+                    if n == size and not buf_len:
-+                        # Shortcut.  Avoid data copy through buf when
-+                        # returning exactly all of our first recv().
-+                        return data
-+                    if n >= left:
-+                        buf.write(data[:left])
-+                        self._rbuf.write(data[left:])
-+                        break
-+                    buf.write(data)
-+                    buf_len += n
-+                    #assert buf_len == buf.tell()
-+                return buf.getvalue()
-+
-+else:
-+    class CP_fileobject(socket._fileobject):
-+        """Faux file object attached to a socket object."""
-+
-+        def sendall(self, data):
-+            """Sendall for non-blocking sockets."""
-+            while data:
-+                try:
-+                    bytes_sent = self.send(data)
-+                    data = data[bytes_sent:]
-+                except socket.error, e:
-+                    if e.args[0] not in socket_errors_nonblocking:
-+                        raise
-+
-+        def send(self, data):
-+            return self._sock.send(data)
-+
-+        def flush(self):
-+            if self._wbuf:
-+                buffer = "".join(self._wbuf)
-+                self._wbuf = []
-+                self.sendall(buffer)
-+
-+        def recv(self, size):
-             while True:
--                data = self.recv(recv_size)
--                if not data:
--                    break
--                buffers.append(data)
--            return "".join(buffers)
--        else:
--            # Read until size bytes or EOF seen, whichever comes first
--            data = self._rbuf
--            buf_len = len(data)
--            if buf_len >= size:
--                self._rbuf = data[size:]
--                return data[:size]
--            buffers = []
--            if data:
--                buffers.append(data)
--            self._rbuf = ""
--            while True:
--                left = size - buf_len
--                recv_size = max(self._rbufsize, left)
--                data = self.recv(recv_size)
--                if not data:
--                    break
--                buffers.append(data)
--                n = len(data)
--                if n >= left:
--                    self._rbuf = data[left:]
--                    buffers[-1] = data[:left]
--                    break
--                buf_len += n
--            return "".join(buffers)
-+                try:
-+                    return self._sock.recv(size)
-+                except socket.error, e:
-+                    if e.args[0] not in socket_errors_nonblocking:
-+                        raise
- 
--    def readline(self, size=-1):
--        data = self._rbuf
--        if size < 0:
--            # Read until \n or EOF, whichever comes first
--            if self._rbufsize <= 1:
--                # Speed up unbuffered case
--                assert data == ""
-+        def read(self, size=-1):
-+            if size < 0:
-+                # Read until EOF
-+                buffers = [self._rbuf]
-+                self._rbuf = ""
-+                if self._rbufsize <= 1:
-+                    recv_size = self.default_bufsize
-+                else:
-+                    recv_size = self._rbufsize
-+
-+                while True:
-+                    data = self.recv(recv_size)
-+                    if not data:
-+                        break
-+                    buffers.append(data)
-+                return "".join(buffers)
-+            else:
-+                # Read until size bytes or EOF seen, whichever comes first
-+                data = self._rbuf
-+                buf_len = len(data)
-+                if buf_len >= size:
-+                    self._rbuf = data[size:]
-+                    return data[:size]
-                 buffers = []
--                while data != "\n":
--                    data = self.recv(1)
-+                if data:
-+                    buffers.append(data)
-+                self._rbuf = ""
-+                while True:
-+                    left = size - buf_len
-+                    recv_size = max(self._rbufsize, left)
-+                    data = self.recv(recv_size)
-                     if not data:
-                         break
-                     buffers.append(data)
-+                    n = len(data)
-+                    if n >= left:
-+                        self._rbuf = data[left:]
-+                        buffers[-1] = data[:left]
-+                        break
-+                    buf_len += n
-                 return "".join(buffers)
--            nl = data.find('\n')
--            if nl >= 0:
--                nl += 1
--                self._rbuf = data[nl:]
--                return data[:nl]
--            buffers = []
--            if data:
--                buffers.append(data)
--            self._rbuf = ""
--            while True:
--                data = self.recv(self._rbufsize)
--                if not data:
--                    break
--                buffers.append(data)
-+
-+        def readline(self, size=-1):
-+            data = self._rbuf
-+            if size < 0:
-+                # Read until \n or EOF, whichever comes first
-+                if self._rbufsize <= 1:
-+                    # Speed up unbuffered case
-+                    assert data == ""
-+                    buffers = []
-+                    while data != "\n":
-+                        data = self.recv(1)
-+                        if not data:
-+                            break
-+                        buffers.append(data)
-+                    return "".join(buffers)
-                 nl = data.find('\n')
-                 if nl >= 0:
-                     nl += 1
-                     self._rbuf = data[nl:]
--                    buffers[-1] = data[:nl]
--                    break
--            return "".join(buffers)
--        else:
--            # Read until size bytes or \n or EOF seen, whichever comes first
--            nl = data.find('\n', 0, size)
--            if nl >= 0:
--                nl += 1
--                self._rbuf = data[nl:]
--                return data[:nl]
--            buf_len = len(data)
--            if buf_len >= size:
--                self._rbuf = data[size:]
--                return data[:size]
--            buffers = []
--            if data:
--                buffers.append(data)
--            self._rbuf = ""
--            while True:
--                data = self.recv(self._rbufsize)
--                if not data:
--                    break
--                buffers.append(data)
--                left = size - buf_len
--                nl = data.find('\n', 0, left)
-+                    return data[:nl]
-+                buffers = []
-+                if data:
-+                    buffers.append(data)
-+                self._rbuf = ""
-+                while True:
-+                    data = self.recv(self._rbufsize)
-+                    if not data:
-+                        break
-+                    buffers.append(data)
-+                    nl = data.find('\n')
-+                    if nl >= 0:
-+                        nl += 1
-+                        self._rbuf = data[nl:]
-+                        buffers[-1] = data[:nl]
-+                        break
-+                return "".join(buffers)
-+            else:
-+                # Read until size bytes or \n or EOF seen, whichever comes first
-+                nl = data.find('\n', 0, size)
-                 if nl >= 0:
-                     nl += 1
-                     self._rbuf = data[nl:]
--                    buffers[-1] = data[:nl]
--                    break
--                n = len(data)
--                if n >= left:
--                    self._rbuf = data[left:]
--                    buffers[-1] = data[:left]
--                    break
--                buf_len += n
--            return "".join(buffers)
-+                    return data[:nl]
-+                buf_len = len(data)
-+                if buf_len >= size:
-+                    self._rbuf = data[size:]
-+                    return data[:size]
-+                buffers = []
-+                if data:
-+                    buffers.append(data)
-+                self._rbuf = ""
-+                while True:
-+                    data = self.recv(self._rbufsize)
-+                    if not data:
-+                        break
-+                    buffers.append(data)
-+                    left = size - buf_len
-+                    nl = data.find('\n', 0, left)
-+                    if nl >= 0:
-+                        nl += 1
-+                        self._rbuf = data[nl:]
-+                        buffers[-1] = data[:nl]
-+                        break
-+                    n = len(data)
-+                    if n >= left:
-+                        self._rbuf = data[left:]
-+                        buffers[-1] = data[:left]
-+                        break
-+                    buf_len += n
-+                return "".join(buffers)
-     
- 
- class SSL_fileobject(CP_fileobject):
diff --git a/community/cherrypy/ChangeLog b/community/cherrypy/ChangeLog
deleted file mode 100644
index 90276417c..000000000
--- a/community/cherrypy/ChangeLog
+++ /dev/null
@@ -1,26 +0,0 @@
-
-2009-04-15  Douglas Soares de Andrade  <douglas@archlinux.org>
-
-	* Updated for i686: 3.1.2
-
-2008-12-14  Douglas Soares de Andrade  <douglas@archlinux.org>
-
-	* Updated for i686: 3.1.1
-
-2008-11-04  Douglas Soares de Andrade  <douglas@archlinux.org>
-
-	* Updated for python 2.6
-	* Thanks to David Moore
-
-2008-07-09  Mateusz Herych <heniekk@gmail.com>
-
-	* Updating for x86_64: 3.1.0
-
-2008-07-09  Douglas Soares de Andrade  <douglas@archlinux.org>
-
-	* Updating for i686: 3.1.0
-
-2008-02-28  Douglas Soares de Andrade  <dsa@aur.archlinux.org>
-
-	* Updating in i686:  3.0.3
-
diff --git a/community/cherrypy/PKGBUILD b/community/cherrypy/PKGBUILD
deleted file mode 100644
index b352f6296..000000000
--- a/community/cherrypy/PKGBUILD
+++ /dev/null
@@ -1,23 +0,0 @@
-$Id: PKGBUILD 40928 2011-03-01 19:03:36Z angvp $
-# Maintainer: Angel Velasquez <angvp@archlinux.org> 
-# Contributor: Douglas Soares de Andrade <dsa@aur.archlinux.org>
-# Contributor: Armando M. Baratti <amblistas@ajato.com.br>
-# Contributor: Florian Richter <Florian_Richter@gmx.de>
-pkgname=cherrypy
-pkgver=3.2.0
-pkgrel=1
-pkgdesc="A pythonic, object-oriented web development framework"
-arch=('i686' 'x86_64')
-url="http://www.cherrypy.org"
-license=('BSD')
-depends=('python2')
-source=(http://download.cherrypy.org/cherrypy/$pkgver/CherryPy-$pkgver.tar.gz 
-	license)
-md5sums=('e5c1322bf5ce962c16283ab7a6dcca3f'
-         '22365dc6b0e6835b53da009aa36af017')
-
-build() {
-    cd $srcdir/CherryPy-$pkgver
-    python2 ./setup.py install --root=$pkgdir
-    install -D -m644 $srcdir/license $pkgdir/usr/share/licenses/$pkgname/license
-}
diff --git a/community/cherrypy/license b/community/cherrypy/license
deleted file mode 100644
index 32e9cf6bd..000000000
--- a/community/cherrypy/license
+++ /dev/null
@@ -1,25 +0,0 @@
-Copyright (c) 2004, CherryPy Team (team@cherrypy.org)
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, 
-are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright notice, 
-      this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright notice, 
-      this list of conditions and the following disclaimer in the documentation 
-      and/or other materials provided with the distribution.
-    * Neither the name of the CherryPy Team nor the names of its contributors 
-      may be used to endorse or promote products derived from this software 
-      without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE 
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/community/gecko-mediaplayer/gecko-mediaplayer-xulrunner2.0.patch b/community/gecko-mediaplayer/gecko-mediaplayer-xulrunner2.0.patch
deleted file mode 100644
index 59d934c89..000000000
--- a/community/gecko-mediaplayer/gecko-mediaplayer-xulrunner2.0.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-Index: src/np_entry.cpp
-===================================================================
---- src/np_entry.cpp.orig
-+++ src/np_entry.cpp
-@@ -175,7 +175,6 @@ NPError OSCALL NP_Initialize(NPNetscapeF
-     pluginFuncs->javaClass = NPP_GetJavaClass();
- #endif
- 
--    NPP_Initialize();
- #endif
- 
-     return NPERR_NO_ERROR;
diff --git a/community/gnote/gtk2.20.patch b/community/gnote/gtk2.20.patch
deleted file mode 100644
index 13b3ee1a9..000000000
--- a/community/gnote/gtk2.20.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From b2e62adb1ed94f9a3f681bd6d0b8117b2ec3c1f9 Mon Sep 17 00:00:00 2001
-From: Debarshi Ray <debarshir@src.gnome.org>
-Date: Sun, 14 Mar 2010 21:24:21 +0000
-Subject: Replaced deprecated macros -- GTK_WIDGET_REALIZED & GTK_WIDGET_VISIBLE
-
-These macros have been deprecated since Gtk+ 2.20, and their
-replacements were introduced in Gtk+ 2.18. Thus, the minimum Gtk+
-version has been bumped accordingly.
----
-diff --git a/configure.ac b/configure.ac
-index 564c0b0..0189b88 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -23,7 +23,7 @@ AC_SUBST(GNOTE_VERSION)
- dnl all the library version.
- dnl if one is harcoded elsewhere, it is a bug
- 
--GTK_VERSION=2.12
-+GTK_VERSION=2.18
- LIBGLIBMM_VERSION=2.0
- LIBGTKMM_VERSION=2.12.0
- LIBGCONF_VERSION=2.0.0
-diff --git a/libtomboy/tomboyutil.c b/libtomboy/tomboyutil.c
-index 162e4a2..9de7e62 100644
---- a/libtomboy/tomboyutil.c
-+++ b/libtomboy/tomboyutil.c
-@@ -153,9 +153,9 @@ tomboy_window_override_user_time (GtkWindow *window)
- void
- tomboy_window_present_hardcore (GtkWindow *window)
- {
--	if (!GTK_WIDGET_REALIZED (window))
-+	if (!gtk_widget_get_realized (GTK_WIDGET (window)))
- 		gtk_widget_realize (GTK_WIDGET (window));
--	else if (GTK_WIDGET_VISIBLE (window))
-+	else if (gtk_widget_get_visible (GTK_WIDGET (window)))
- 		tomboy_window_move_to_current_workspace (window);
- 
- 	tomboy_window_override_user_time (window);
---
-cgit v0.8.3.1
diff --git a/community/llvm/PKGBUILD b/community/llvm/PKGBUILD
deleted file mode 100644
index 99ea6e4a7..000000000
--- a/community/llvm/PKGBUILD
+++ /dev/null
@@ -1,225 +0,0 @@
-# $Id: PKGBUILD 44752 2011-04-11 14:36:48Z foutrelis $
-# Maintainer: Evangelos Foutras <foutrelis@gmail.com>
-# Contributor: Jan "heftig" Steffens <jan.steffens@gmail.com>
-# Contributor: Sebastian Nowicki <sebnow@gmail.com>
-# Contributor: Devin Cofer <ranguvar{AT]archlinux[DOT}us>
-# Contributor: Tobias Kieslich <tobias@justdreams.de>
-# Contributor: Geoffroy Carrier <geoffroy.carrier@aur.archlinux.org>
-# Contributor: Tomas Lindquist Olsen <tomas@famolsen.dk>
-# Contributor: Roberto Alsina <ralsina@kde.org>
-# Contributor: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
-
-pkgname=('llvm' 'llvm-ocaml' 'clang' 'clang-analyzer')
-pkgver=2.9
-_gcc_ver=4.6.0
-pkgrel=4
-arch=('i686' 'x86_64')
-url="http://llvm.org/"
-license=('custom:University of Illinois/NCSA Open Source License')
-makedepends=('gcc-libs' 'libffi' 'python2' 'ocaml' "gcc=$_gcc_ver")
-source=(http://llvm.org/releases/$pkgver/$pkgname-$pkgver.tgz
-        http://llvm.org/releases/$pkgver/clang-$pkgver.tgz
-        ftp://ftp.archlinux.org/other/community/clang/gcc-headers-4.5.2.tar.xz
-        clang-plugin-loader-registry.patch
-        cindexer-clang-path.patch
-        clang-toolchains-gcc-versions.patch
-        clang-pure64.patch
-        enable-lto.patch)
-md5sums=('793138412d2af2c7c7f54615f8943771'
-         '634de18d04b7a4ded19ec4c17d23cfca'
-         '70e23a3dc2b38ecb2bb4d2c48f47295d'
-         '02c23b4aaca3445b8bf39fddb2f9906e'
-         '87a7162dbe99e9ffce6c40bd09f5f4f0'
-         '8da236120a9a287a977b575b8b905c93'
-         '225ee6b531f8327f34f344a18cb4ec81'
-         '8f7582d7440e4a8342c3aea9ec714fb4')
-
-build() {
-  cd "$srcdir/$pkgname-$pkgver"
-
-  # At the present, clang must reside inside the LLVM source code tree to build
-  # See http://llvm.org/bugs/show_bug.cgi?id=4840
-  rm -rf tools/clang
-  cp -r "$srcdir/clang-$pkgver" tools/clang
-
-  # Fix symbolic links from OCaml bindings to LLVM libraries
-  sed -i 's:\$(PROJ_libdir):/usr/lib/llvm:' bindings/ocaml/Makefile.ocaml
-
-  # Fix installation directories, ./configure doesn't seem to set them right
-  sed -i -e 's:\$(PROJ_prefix)/etc/llvm:/etc/llvm:' \
-         -e 's:\$(PROJ_prefix)/lib:$(PROJ_prefix)/lib/llvm:' \
-         -e 's:\$(PROJ_prefix)/docs/llvm:$(PROJ_prefix)/share/doc/llvm:' \
-    Makefile.config.in
-
-  # Fix insecure rpath (http://bugs.archlinux.org/task/14017)
-  sed -i 's:$(RPATH) -Wl,$(\(ToolDir\|LibDir\|ExmplDir\))::g' Makefile.rules
-
-  # Get the correct list of symbols to export
-  # See http://lists.cs.uiuc.edu/pipermail/cfe-dev/2010-April/008559.html
-  patch -Np1 -i "$srcdir/clang-plugin-loader-registry.patch"
-
-  # Fix clang path in CIndexer.cpp (https://bugs.archlinux.org/task/22799)
-  patch -d tools/clang -Np0 -i "$srcdir/cindexer-clang-path.patch"
-
-  # Add GCC 4.6.0 to GccVersions (FS#23631)
-  patch -d tools/clang -Np1 -i "$srcdir/clang-toolchains-gcc-versions.patch"
-
-  if [[ $CARCH == x86_64 ]]; then
-    # Adjust lib paths
-    patch -d tools/clang -Np0 -i "$srcdir/clang-pure64.patch"
-  fi
-
-  # Make -flto work
-  # Use gold instead of default linker, and always use the plugin
-  patch -d tools/clang -Np0 -i "$srcdir/enable-lto.patch"
-
-  # Apply strip option to configure
-  _optimized_switch="enable"
-  [[ $(check_option strip) == n ]] && _optimized_switch="disable"
-
-  # Include location of libffi headers in CPPFLAGS
-  export CPPFLAGS="$CPPFLAGS $(pkg-config --cflags libffi)"
-
-  # TODO: Uncomment when clang works with GCC 4.6+
-  #_cxx_headers="/usr/include/c++/$_gcc_ver"
-  #if [[ ! -d $_cxx_headers ]]; then
-  #  error "Couldn't find the C++ headers, PKGBUILD needs fixing!"
-  #  return 1
-  #fi
-  _cxx_headers="/usr/include/c++/clang-$pkgver"
-
-  _32bit_headers=""
-  if [[ $CARCH == x86_64 ]]; then
-    # Important for multilib
-    _32bit_headers="32"
-  fi
-
-  ./configure \
-    --prefix=/usr \
-    --libdir=/usr/lib/llvm \
-    --sysconfdir=/etc \
-    --enable-shared \
-    --enable-libffi \
-    --enable-targets=all \
-    --disable-expensive-checks \
-    --disable-debug-runtime \
-    --disable-assertions \
-    --with-binutils-include=/usr/include \
-    --with-cxx-include-root=$_cxx_headers \
-    --with-cxx-include-arch=$CHOST \
-    --with-cxx-include-32bit-dir=$_32bit_headers \
-    --$_optimized_switch-optimized
-
-  make REQUIRES_RTTI=1
-}
-
-package_llvm() {
-  pkgdesc="Low Level Virtual Machine"
-  depends=('perl' 'libffi')
-
-  cd "$srcdir/$pkgname-$pkgver"
-
-  # We move the clang directory out of the tree so it won't get installed and
-  # then we bring it back in for the clang package
-  mv tools/clang "$srcdir"
-  # -j1 is due to race conditions during the installation of the OCaml bindings
-  make -j1 DESTDIR="$pkgdir" install
-  mv "$srcdir/clang" tools
-
-  # OCaml bindings go to a separate package
-  rm -rf "$srcdir"/{ocaml,ocamldoc}
-  mv "$pkgdir"/usr/{lib/ocaml,share/doc/llvm/ocamldoc} "$srcdir"
-
-  # Remove duplicate files installed by the OCaml bindings
-  rm "$pkgdir"/usr/{lib/llvm/libllvm*,share/doc/llvm/ocamldoc.tar.gz}
-
-  # Fix permissions of static libs
-  chmod -x "$pkgdir"/usr/lib/llvm/*.a
-
-  # Fix libdir in llvm-config (http://bugs.archlinux.org/task/14487)
-  sed -i 's:\(ABS_RUN_DIR/lib\):\1/llvm:' "$pkgdir/usr/bin/llvm-config"
-
-  # Get rid of example Hello transformation
-  rm "$pkgdir"/usr/lib/llvm/*LLVMHello.*
-
-  # Symlink the gold plugin where clang expects it
-  ln -s llvm/LLVMgold.so "$pkgdir/usr/lib/LLVMgold.so"
-
-  # Add ld.so.conf.d entry
-  install -d "$pkgdir/etc/ld.so.conf.d"
-  echo /usr/lib/llvm >"$pkgdir/etc/ld.so.conf.d/llvm.conf"
-
-  install -Dm644 LICENSE.TXT "$pkgdir/usr/share/licenses/$pkgname/LICENSE"
-}
-
-package_llvm-ocaml() {
-  pkgdesc="OCaml bindings for LLVM"
-  depends=("llvm=$pkgver-$pkgrel" 'ocaml')
-
-  cd "$srcdir/llvm-$pkgver"
-
-  install -d "$pkgdir"/{usr/lib,usr/share/doc/llvm}
-  cp -r "$srcdir/ocaml" "$pkgdir/usr/lib"
-  cp -r "$srcdir/ocamldoc" "$pkgdir/usr/share/doc/llvm"
-
-  # Remove execute bit from static libraries
-  chmod -x "$pkgdir"/usr/lib/ocaml/libllvm*.a
-
-  install -Dm644 LICENSE.TXT "$pkgdir/usr/share/licenses/llvm-ocaml/LICENSE"
-}
-
-package_clang() {
-  pkgdesc="C language family frontend for LLVM"
-  url="http://clang.llvm.org/"
-  # It looks like clang still needs GCC to assemble and link object files
-  # See http://old.nabble.com/%22clang--v%22-shows-a-GCC-call-td28378453.html
-  depends=("llvm=$pkgver-$pkgrel" "gcc=$_gcc_ver")
-
-  # Fix installation path for clang docs
-  sed -i 's:$(PROJ_prefix)/share/doc/llvm:$(PROJ_prefix)/share/doc/clang:' \
-    "$srcdir/llvm-$pkgver/Makefile.config"
-
-  cd "$srcdir/llvm-$pkgver/tools/clang"
-  make DESTDIR="$pkgdir" install
-
-  # Fix permissions of static libs
-  chmod -x "$pkgdir"/usr/lib/llvm/*.a
-
-  # Revert the path change in case we want to do a repackage later
-  sed -i 's:$(PROJ_prefix)/share/doc/clang:$(PROJ_prefix)/share/doc/llvm:' \
-    "$srcdir/llvm-$pkgver/Makefile.config"
-
-  # Install old libstdc++ headers. Contains combined headers from
-  # gcc 4.5.2-6-i686 and gcc-multilib-4.5.2-6-x86_64
-  install -d "$pkgdir/usr/include/c++"
-  cp -rd "$srcdir/gcc-headers-4.5.2" "$pkgdir/usr/include/c++/clang-$pkgver"
-
-  install -Dm644 LICENSE.TXT "$pkgdir/usr/share/licenses/clang/LICENSE"
-}
-
-package_clang-analyzer() {
-  pkgdesc="A source code analysis framework"
-  url="http://clang-analyzer.llvm.org/"
-  depends=("clang=$pkgver-$pkgrel" 'python2')
-
-  cd "$srcdir/llvm-$pkgver/tools/clang"
-
-  install -d "$pkgdir"/usr/{bin,lib/clang-analyzer}
-  for _tool in scan-{build,view}; do
-    cp -r tools/$_tool "$pkgdir/usr/lib/clang-analyzer/"
-    ln -s /usr/lib/clang-analyzer/$_tool/$_tool "$pkgdir/usr/bin/"
-  done
-
-  # Use Python 2
-  sed -i 's/env python$/\02/' \
-    "$pkgdir/usr/lib/clang-analyzer/scan-view/scan-view" \
-    "$pkgdir/usr/lib/clang-analyzer/scan-build/set-xcode-analyzer"
-
-  # Compile Python scripts
-  python2 -m compileall "$pkgdir/usr/lib/clang-analyzer"
-  python2 -O -m compileall "$pkgdir/usr/lib/clang-analyzer"
-
-  install -Dm644 LICENSE.TXT "$pkgdir/usr/share/licenses/clang-analyzer/LICENSE"
-}
-
-# vim:set ts=2 sw=2 et:
diff --git a/community/llvm/cindexer-clang-path.patch b/community/llvm/cindexer-clang-path.patch
deleted file mode 100644
index ddaab690e..000000000
--- a/community/llvm/cindexer-clang-path.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- tools/libclang/CIndexer.cpp.orig	2011-04-07 13:08:24.000000000 +0300
-+++ tools/libclang/CIndexer.cpp	2011-04-07 13:11:52.224884642 +0300
-@@ -80,6 +80,7 @@ std::string CIndexer::getClangResourcesP
-   
-   // We now have the CIndex directory, locate clang relative to it.
-   LibClangPath.eraseComponent();
-+  LibClangPath.eraseComponent();
- #endif
-   
-   LibClangPath.appendComponent("clang");
diff --git a/community/llvm/clang-plugin-loader-registry.patch b/community/llvm/clang-plugin-loader-registry.patch
deleted file mode 100644
index f46eb9fce..000000000
--- a/community/llvm/clang-plugin-loader-registry.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -upr llvm-2.7.orig/autoconf/ExportMap.map llvm-2.7/autoconf/ExportMap.map
---- llvm-2.7.orig/autoconf/ExportMap.map	2010-02-25 00:33:41.000000000 +0200
-+++ llvm-2.7/autoconf/ExportMap.map	2010-05-10 14:14:22.000000000 +0300
-@@ -2,6 +2,7 @@
- 	global: main;
- 		__progname;
- 		environ;
-+		_ZN4llvm8RegistryIN5clang14FrontendActionENS_14RegistryTraitsIS2_EEE4HeadE;
- 
- 	local: *;
- };
diff --git a/community/llvm/clang-pure64.patch b/community/llvm/clang-pure64.patch
deleted file mode 100644
index da6178519..000000000
--- a/community/llvm/clang-pure64.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-Index: lib/Driver/Tools.cpp
-===================================================================
---- lib/Driver/Tools.cpp	(revision 123373)
-+++ lib/Driver/Tools.cpp	(working copy)
-@@ -3306,7 +3306,7 @@
-     else if (ToolChain.getArch() == llvm::Triple::arm)
-       CmdArgs.push_back("/lib/ld-linux.so.3");
-     else
--      CmdArgs.push_back("/lib64/ld-linux-x86-64.so.2");
-+      CmdArgs.push_back("/lib/ld-linux-x86-64.so.2");
-   }
- 
-   CmdArgs.push_back("-o");
-Index: lib/Driver/ToolChains.cpp
-===================================================================
---- lib/Driver/ToolChains.cpp	(revision 123373)
-+++ lib/Driver/ToolChains.cpp	(working copy)
-@@ -1317,18 +1317,10 @@
-   if (Arch == llvm::Triple::x86)
-     Suffix64 = "/64";
- 
--  std::string Lib32 = "lib";
--
--  bool Exists;
--  if (!llvm::sys::fs::exists("/lib32", Exists) && Exists)
--    Lib32 = "lib32";
--
-+  std::string Lib32 = "lib32";
-   std::string Lib64 = "lib";
--  bool Symlink;
--  if (!llvm::sys::fs::exists("/lib64", Exists) && Exists &&
--      (llvm::sys::fs::is_symlink("/lib64", Symlink) || !Symlink))
--    Lib64 = "lib64";
- 
-+  bool Exists;
-   std::string GccTriple = "";
-   if (Arch == llvm::Triple::arm) {
-     if (!llvm::sys::fs::exists("/usr/lib/gcc/arm-linux-gnueabi", Exists) &&
diff --git a/community/llvm/clang-toolchains-gcc-versions.patch b/community/llvm/clang-toolchains-gcc-versions.patch
deleted file mode 100644
index 2e527300d..000000000
--- a/community/llvm/clang-toolchains-gcc-versions.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -upr clang-2.9.orig/lib/Driver/ToolChains.cpp clang-2.9/lib/Driver/ToolChains.cpp
---- clang-2.9.orig/lib/Driver/ToolChains.cpp	2011-03-21 23:29:27.000000000 +0200
-+++ clang-2.9/lib/Driver/ToolChains.cpp	2011-04-08 00:03:34.000000000 +0300
-@@ -1449,7 +1449,7 @@ Linux::Linux(const HostInfo &Host, const
-       GccTriple = "i586-suse-linux";
-   }
- 
--  const char* GccVersions[] = {"4.5.2", "4.5.1", "4.5", "4.4.5", "4.4.4",
-+  const char* GccVersions[] = {"4.6.0", "4.5.2", "4.5.1", "4.5", "4.4.5", "4.4.4",
-                                "4.4.3", "4.4", "4.3.4", "4.3.3", "4.3.2",
-                                "4.3", "4.2.4", "4.2.3", "4.2.2", "4.2.1",
-                                "4.2"};
diff --git a/community/llvm/enable-lto.patch b/community/llvm/enable-lto.patch
deleted file mode 100644
index 40d93104a..000000000
--- a/community/llvm/enable-lto.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-Index: lib/Driver/ToolChains.cpp
-===================================================================
---- lib/Driver/ToolChains.cpp	(revision 123373)
-+++ lib/Driver/ToolChains.cpp	(working copy)
-@@ -1398,11 +1398,11 @@
-     Lib = Lib64;
-   }
- 
--  llvm::sys::Path LinkerPath(Base + "/../../../../" + GccTriple + "/bin/ld");
-+  llvm::sys::Path LinkerPath(Base + "/../../../../" + GccTriple + "/bin/ld.gold");
-   if (!llvm::sys::fs::exists(LinkerPath.str(), Exists) && Exists)
-     Linker = LinkerPath.str();
-   else
--    Linker = GetProgramPath("ld");
-+    Linker = GetProgramPath("ld.gold");
- 
-   LinuxDistro Distro = DetectLinuxDistro(Arch);
- 
-Index: lib/Driver/Tools.cpp
-===================================================================
---- lib/Driver/Tools.cpp	(revision 123373)
-+++ lib/Driver/Tools.cpp	(working copy)
-@@ -3412,11 +3412,11 @@
-     }
-   }
- 
--  if (Args.hasArg(options::OPT_use_gold_plugin)) {
-+  // if (Args.hasArg(options::OPT_use_gold_plugin)) {
-     CmdArgs.push_back("-plugin");
-     std::string Plugin = ToolChain.getDriver().Dir + "/../lib/LLVMgold.so";
-     CmdArgs.push_back(Args.MakeArgString(Plugin));
--  }
-+  // }
- 
-   C.addCommand(new Command(JA, *this, ToolChain.Linker.c_str(), CmdArgs));
- }
diff --git a/community/xonotic/PKGBUILD b/community/xonotic/PKGBUILD
deleted file mode 100644
index 676240162..000000000
--- a/community/xonotic/PKGBUILD
+++ /dev/null
@@ -1,53 +0,0 @@
-# $Id$
-# Maintainer: Sven-Hendrik Haase <sh@lutzhaase.com>
-# Contributor: Alexander Suhoverhov <cy at ngs dot ru>
-pkgname=xonotic
-pkgver=0.1.0
-pkgrel=2
-pkgdesc="A free, fast-paced crossplatform first-person shooter"
-arch=('i686' 'x86_64')
-url="http://xonotic.org"
-license=('GPL')
-depends=('alsa-lib' 'curl' 'libjpeg>=8' 'libmodplug' 'libvorbis' 'libxpm' 'libxxf86dga' 'libxxf86vm' 'sdl' 'libpng>=1.4.0' 'xonotic-data')
-makedepends=('unzip' 'mesa')
-source=('http://dl.xonotic.org/xonotic-0.1.0preview.zip'
-        'xonotic-dedicated.sh'
-        'xonotic-glx.sh'
-        'xonotic-sdl.sh'
-        'xonotic-glx.desktop'
-        'xonotic-sdl.desktop')
-md5sums=('aafb43893aa66e01488c817e3a60d96d'
-        '2c0aef8104fa34aef58d368d994abca3'
-        'd2f357eab92db585448476470bbf9c1c'
-        'fdb9b96cd2b700ea9e8a7d6a1ab3505e'
-        '914c7b9163e92b35f0ab57fdb1653ac5'
-        'da7d812ff231c9332cd694b39757adda')
-
-build() {
-	# le compiling
-	cd $srcdir/Xonotic/source/darkplaces
-
-	# build the binaries separately instead to avoid truncated files
-	make CPUOPTIMIZATIONS="${CFLAGS}" DP_LINK_TO_LIBJPEG=1 cl-nexuiz
-	make CPUOPTIMIZATIONS="${CFLAGS}" DP_LINK_TO_LIBJPEG=1 sdl-nexuiz
-	make CPUOPTIMIZATIONS="${CFLAGS}" DP_LINK_TO_LIBJPEG=1 sv-nexuiz
-}
-
-package() {
-	cd $srcdir/Xonotic
-
-	# binaries
-	install -Dm755 source/darkplaces/nexuiz-dedicated $pkgdir/opt/xonotic/xonotic-dedicated
-	install -Dm755 source/darkplaces/nexuiz-glx $pkgdir/opt/xonotic/xonotic-glx
-	install -Dm755 source/darkplaces/nexuiz-sdl $pkgdir/opt/xonotic/xonotic-sdl
-
-	# convenience files
-	mkdir -p $pkgdir/usr/share/applications
-	install -Dm644 $srcdir/*.desktop -t $pkgdir/usr/share/applications
-	install -Dm755 $srcdir/xonotic-dedicated.sh $pkgdir/usr/bin/xonotic-dedicated
-	install -Dm755 $srcdir/xonotic-glx.sh $pkgdir/usr/bin/xonotic-glx
-	install -Dm755 $srcdir/xonotic-sdl.sh $pkgdir/usr/bin/xonotic-sdl
-	install -Dm644 $srcdir/Xonotic/misc/logos/icons_png/xonotic_512.png $pkgdir/usr/share/pixmaps/xonotic.png
-}
-
-# vim: ts=2:sw=2 et:
diff --git a/community/xonotic/xonotic-dedicated.sh b/community/xonotic/xonotic-dedicated.sh
deleted file mode 100644
index b9998ca3c..000000000
--- a/community/xonotic/xonotic-dedicated.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-cd /opt/xonotic
-./xonotic-dedicated $@
diff --git a/community/xonotic/xonotic-glx.desktop b/community/xonotic/xonotic-glx.desktop
deleted file mode 100644
index 9f9e78cc1..000000000
--- a/community/xonotic/xonotic-glx.desktop
+++ /dev/null
@@ -1,11 +0,0 @@
-[Desktop Entry]
-Type=Application
-Version=2.5
-Encoding=UTF-8
-Name=Xonotic (GLX)
-Comment=a free open-source first person shooter
-Icon=/usr/share/pixmaps/xonotic.png
-Exec=/usr/bin/xonotic-glx
-Terminal=false
-StartupNotify=false
-Categories=Game;
diff --git a/community/xonotic/xonotic-glx.sh b/community/xonotic/xonotic-glx.sh
deleted file mode 100644
index e52a99c9f..000000000
--- a/community/xonotic/xonotic-glx.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-cd /opt/xonotic
-./xonotic-glx $@
diff --git a/community/xonotic/xonotic-sdl.desktop b/community/xonotic/xonotic-sdl.desktop
deleted file mode 100644
index 32b37f2c5..000000000
--- a/community/xonotic/xonotic-sdl.desktop
+++ /dev/null
@@ -1,11 +0,0 @@
-[Desktop Entry]
-Type=Application
-Version=2.5
-Encoding=UTF-8
-Name=Xonotic (SDL)
-Comment=a free open-source first person shooter
-Icon=/usr/share/pixmaps/xonotic.png
-Exec=/usr/bin/xonotic-sdl
-Terminal=false
-StartupNotify=false
-Categories=Game;
diff --git a/community/xonotic/xonotic-sdl.sh b/community/xonotic/xonotic-sdl.sh
deleted file mode 100644
index 976d3ccf5..000000000
--- a/community/xonotic/xonotic-sdl.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-cd /opt/xonotic
-./xonotic-sdl $@
diff --git a/community/yajl/handle-null-case.patch b/community/yajl/handle-null-case.patch
deleted file mode 100644
index 923e23961..000000000
--- a/community/yajl/handle-null-case.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 615924b7bf68791c166149a9f76bec740dacefd6 Mon Sep 17 00:00:00 2001
-From: Lloyd Hilaiel <lloyd@hilaiel.com>
-Date: Tue, 26 Apr 2011 09:47:13 -0600
-Subject: [PATCH] crash fix, handle the case where yajl_alloc() is followed by
- yajl_complete_parse() without a call to yajl_parse() in the
- middle.  closes #27.
-
----
- src/yajl.c        |   18 +++++++++++++++---
- src/yajl_parser.c |    2 +-
- 2 files changed, 16 insertions(+), 4 deletions(-)
-
-diff --git a/src/yajl.c b/src/yajl.c
-index 793eea3..293e545 100644
---- a/src/yajl.c
-+++ b/src/yajl.c
-@@ -49,7 +49,7 @@ yajl_alloc(const yajl_callbacks * callbacks,
- {
-     yajl_handle hand = NULL;
-     yajl_alloc_funcs afsBuffer;
--    
-+
-     /* first order of business is to set up memory allocation routines */
-     if (afs != NULL) {
-         if (afs->malloc == NULL || afs->realloc == NULL || afs->free == NULL)
-@@ -73,7 +73,7 @@ yajl_alloc(const yajl_callbacks * callbacks,
-     hand->decodeBuf = yajl_buf_alloc(&(hand->alloc));
-     hand->flags	    = 0;
-     yajl_bs_init(hand->stateStack, &(hand->alloc));
--    yajl_bs_push(hand->stateStack, yajl_state_start);    
-+    yajl_bs_push(hand->stateStack, yajl_state_start);
- 
-     return hand;
- }
-@@ -120,7 +120,7 @@ yajl_parse(yajl_handle hand, const unsigned char * jsonText,
- {
-     yajl_status status;
- 
--    // lazy allocate the lexer
-+    /* lazy allocation of the lexer */
-     if (hand->lexer == NULL) {
-         hand->lexer = yajl_lex_alloc(&(hand->alloc),
-                                      hand->flags & yajl_allow_comments,
-@@ -135,6 +135,18 @@ yajl_parse(yajl_handle hand, const unsigned char * jsonText,
- yajl_status
- yajl_complete_parse(yajl_handle hand)
- {
-+    /* The lexer is lazy allocated in the first call to parse.  if parse is
-+     * never called, then no data was provided to parse at all.  This is a
-+     * "premature EOF" error unless yajl_allow_partial_values is specified.
-+     * allocating the lexer now is the simplest possible way to handle this
-+     * case while preserving all the other semantics of the parser
-+     * (multiple values, partial values, etc). */
-+    if (hand->lexer == NULL) {
-+        hand->lexer = yajl_lex_alloc(&(hand->alloc),
-+                                     hand->flags & yajl_allow_comments,
-+                                     !(hand->flags & yajl_dont_validate_strings));
-+    }
-+
-     return yajl_do_finish(hand);
- }
- 
-diff --git a/src/yajl_parser.c b/src/yajl_parser.c
-index 20d73bf..3903b38 100644
---- a/src/yajl_parser.c
-+++ b/src/yajl_parser.c
-@@ -155,7 +155,7 @@ yajl_status
- yajl_do_finish(yajl_handle hand)
- {
-     yajl_status stat;
--    stat = yajl_do_parse(hand,(const unsigned char *)" ",1);
-+    stat = yajl_do_parse(hand,(const unsigned char *) " ",1);
- 
-     if (stat != yajl_status_ok) return stat;
- 
--- 
-1.7.4.4
-