Sun Jun 19 02:48:26 UTC 2011

31 files changed, 0 insertions, 2618 deletions

diff --git a/extra/alpine/2.00-lpam.patch b/extra/alpine/2.00-lpam.patch
deleted file mode 100644
index 69e66d7ef..000000000
--- a/extra/alpine/2.00-lpam.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- alpine-2.00.orig/alpine/Makefile.in
-+++ alpine-2.00/alpine/Makefile.in
-@@ -169,7 +169,7 @@
- LIBICONV = @LIBICONV@
- LIBINTL = @LIBINTL@
- LIBOBJS = @LIBOBJS@
--LIBS = @LIBS@
-+LIBS = @LIBS@ -lpam
- LIBTOOL = @LIBTOOL@
- LN = @LN@
- LN_S = @LN_S@
- LTLIBICONV = @LTLIBICONV@
- LTLIBINTL = @LTLIBINTL@
diff --git a/extra/alpine/CVE-2008-5514.patch b/extra/alpine/CVE-2008-5514.patch
deleted file mode 100644
index 594bea0b2..000000000
--- a/extra/alpine/CVE-2008-5514.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- alpine-2.00/imap/src/c-client/rfc822.c
-+++ alpine-2.00/imap/src/c-client/rfc822.c
-@@ -1351,6 +1351,7 @@
- 
- static long rfc822_output_char (RFC822BUFFER *buf,int c)
- {
-+  if ((buf->cur == buf->end) && !rfc822_output_flush (buf)) return NIL;
-   *buf->cur++ = c;		/* add character, soutr buffer if full */
-   return (buf->cur == buf->end) ? rfc822_output_flush (buf) : LONGT;
- }
-@@ -1374,7 +1375,8 @@
-       len -= i;
-     }
- 				/* soutr buffer now if full */
--    if (len && !rfc822_output_flush (buf)) return NIL;
-+    if ((len || (buf->cur == buf->end)) && !rfc822_output_flush (buf))
-+      return NIL;
-   }
-   return LONGT;
- }
diff --git a/extra/alpine/PKGBUILD b/extra/alpine/PKGBUILD
deleted file mode 100644
index 6b2f9ee73..000000000
--- a/extra/alpine/PKGBUILD
+++ /dev/null
@@ -1,44 +0,0 @@
-# $Id: PKGBUILD 121113 2011-04-29 02:56:31Z eric $
-# Maintainer: Eric Bélanger <eric@archlinux.org>
-
-pkgname=alpine
-pkgver=2.00
-pkgrel=13
-_patchlevel=79
-pkgdesc="The Apache-licensed PINE (a tool for reading, sending, and managing electronic messages)"
-arch=('i686' 'x86_64')
-url="http://www.washington.edu/alpine/"
-license=('APACHE')
-depends=('libldap' 'krb5' 'gettext')
-optdepends=('aspell: for spell-checking support')
-provides=('pine')
-conflicts=('pine')
-replaces=('pine')
-options=('!makeflags')
-source=(ftp://ftp.cac.washington.edu/${pkgname}/${pkgname}.tar.bz2 \
-        http://staff.washington.edu/chappa/alpine/patches/alpine-${pkgver}/all_${_patchlevel}.patch.gz \
-        2.00-lpam.patch CVE-2008-5514.patch)
-md5sums=('84e44cbf71ed674800a5d57eed9c1c52'
-         'd7dffd121c9a1cac4c458c0ff71df1ce'
-         'cd3911c16fc6a072e853c0ccfc35857c'
-         '1b52a54a656979116c09fb1d948a4325')
-sha1sums=('dcbd3c5419954f484ccf706feaba31ce48cdebc4'
-          'd3acbf0e46c50feb2e822ef3bdc0a0f43c007294'
-          '1b39525f91ebd5a9de5a1e04f5554f6fa5f58ae3'
-          'bc61d76a237ff42b00b3f60f2e6fc5c45e261dbb')
-
-build() {
-  cd "${srcdir}/${pkgname}-${pkgver}"
-  patch -p1 < ../all_${_patchlevel}.patch
-  patch -p1 < ../2.00-lpam.patch
-  patch -p1 < ../CVE-2008-5514.patch
-  ./configure --prefix=/usr --without-passfile --without-tcl \
-    --disable-shared --with-system-pinerc=/etc/alpine.d/pine.conf \
-    --with-system-fixed-pinerc=/etc/alpine.d/pine.conf.fixed
-  make
-}
-
-package() {
-  cd "${srcdir}/${pkgname}-${pkgver}"
-  make DESTDIR="${pkgdir}" install
-}
diff --git a/extra/anjuta-extras/PKGBUILD b/extra/anjuta-extras/PKGBUILD
deleted file mode 100644
index 0d1eea2e5..000000000
--- a/extra/anjuta-extras/PKGBUILD
+++ /dev/null
@@ -1,26 +0,0 @@
-# $Id: PKGBUILD 105124 2011-01-06 17:19:56Z ibiru $
-# Mantainer: Jan de Groot <jgc@archlinux.org>
-
-pkgname=anjuta-extras
-pkgver=2.32.1.1
-pkgrel=1
-pkgdesc="Anjuta Integrated Development Environment extra plugins"
-arch=('i686' 'x86_64')
-license=('GPL')
-depends=('anjuta>=2.32.0.0' 'libgnomecanvas>=2.30.2' 'graphviz>=2.26.3' 'valgrind')
-makedepends=('intltool')
-install=anjuta-extras.install
-url="http://anjuta.sourceforge.net/"
-source=(ftp://ftp.gnome.org/pub/gnome/sources/${pkgname}/2.32/${pkgname}-${pkgver}.tar.bz2)
-options=('!libtool' '!emptydirs')
-sha256sums=('0461b78eaa11b7a930001024c4db2484863b35f5f52acaa23c568bc6355414a4')
-
-build() {
-  cd "${srcdir}/${pkgname}-${pkgver}"
-  ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --disable-static
-  make
-  make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 DESTDIR="${pkgdir}" install
-
-  install -m755 -d "${pkgdir}/usr/share/gconf/schemas"
-  gconf-merge-schema "${pkgdir}/usr/share/gconf/schemas/${pkgname}.schemas" --domain anjuta-extras ${pkgdir}/etc/gconf/schemas/*.schemas
-}
diff --git a/extra/anjuta-extras/anjuta-extras.install b/extra/anjuta-extras/anjuta-extras.install
deleted file mode 100644
index 2c23edf15..000000000
--- a/extra/anjuta-extras/anjuta-extras.install
+++ /dev/null
@@ -1,17 +0,0 @@
-pkgname=anjuta
-
-post_install() {
-  usr/sbin/gconfpkg --install ${pkgname}
-}
-
-pre_upgrade() {
-  pre_remove $1
-}
-
-post_upgrade() {
-  post_install $1
-}
-
-pre_remove() {
-  usr/sbin/gconfpkg --uninstall ${pkgname}
-}
diff --git a/extra/aufs2-util/PKGBUILD b/extra/aufs2-util/PKGBUILD
deleted file mode 100644
index 3d2e23fed..000000000
--- a/extra/aufs2-util/PKGBUILD
+++ /dev/null
@@ -1,25 +0,0 @@
-# $Id: PKGBUILD 114820 2011-03-16 06:31:06Z tpowa $
-# Contributor: Paul Mattal <paul@mattal.com>
-# Maintainer: Paul Mattal <pjmattal@elys.com>
-pkgname=aufs2-util
-pkgver=20110314
-pkgrel=1
-pkgdesc="Another Unionfs Implementation that supports NFS branches"
-arch=('i686' 'x86_64')
-url="http://aufs.sourceforge.net/"
-license=('GPL2')
-depends=('glibc')
-makedepends=('aufs2>=2.6.38_20110314' 'kernel26-headers')
-replaces=('aufs-utils')
-source=("ftp://ftp.archlinux.org/other/${pkgname}/${pkgname}-${pkgver}.tar.gz")
-
-build() {
-  cd $srcdir/$pkgname-$pkgver
-  make
-}
-
-package() {
-  cd $srcdir/$pkgname-$pkgver
-  make DESTDIR=$pkgdir install
-}
-md5sums=('bf0f9c86361e12a3181fb3891e57cd8d')
diff --git a/extra/aufs2-util/create-tarball.sh b/extra/aufs2-util/create-tarball.sh
deleted file mode 100755
index 361cbbc38..000000000
--- a/extra/aufs2-util/create-tarball.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-GITSNAPSHOT=20110314
-# aufs2 (no -xx) for the latest -rc version.
-git clone http://git.c3sl.ufpr.br/pub/scm/aufs/aufs2-util.git aufs2-util.git
-cd aufs2-util.git
-#git checkout origin/aufs2${AUFS2VERSION}
-git checkout origin/aufs2.1
-cd ..
-rm -rf aufs2-util-${GITSNAPSHOT}
-cp -a aufs2-util.git aufs2-util-${GITSNAPSHOT}
-tar -czf aufs2-util-${GITSNAPSHOT}.tar.gz --exclude=.git aufs2-util-${GITSNAPSHOT}
diff --git a/extra/bochs/2.4.5-fetchcode.patch b/extra/bochs/2.4.5-fetchcode.patch
deleted file mode 100644
index ef980a340..000000000
--- a/extra/bochs/2.4.5-fetchcode.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- cpu/fetchdecode.cc.orig	2010-04-16 15:52:44.000000000 -0400
-+++ cpu/fetchdecode.cc	2010-10-07 13:23:06.000000000 -0400
-@@ -1,5 +1,5 @@
- /////////////////////////////////////////////////////////////////////////
--// $Id: fetchdecode.cc,v 1.266 2010/04/16 19:52:44 sshwarts Exp $
-+// $Id: fetchdecode.cc,v 1.267 2010/04/29 21:04:23 sshwarts Exp $
- /////////////////////////////////////////////////////////////////////////
- //
- //  Copyright (C) 2001-2009  The Bochs Project
-@@ -474,7 +474,7 @@
-   /* 0F 0D /wr */ { 0, BX_IA_PREFETCHW },       // 3DNow! PREFETCH on AMD, NOP on Intel
-   /* 0F 0E /wr */ { 0, BX_IA_FEMMS },           // 3DNow! FEMMS
- #if BX_SUPPORT_3DNOW
--  /* 0F 0F /wr */ { BxImmediate_Ib, BX_IA_ERROR, Bx3DNowOpcodeInfo },
-+  /* 0F 0F /wr */ { BxImmediate_Ib, BX_IA_ERROR },
- #else
-   /* 0F 0F /wr */ { 0, BX_IA_ERROR },
- #endif
-@@ -1025,7 +1025,7 @@
-   /* 0F 0D /dr */ { 0, BX_IA_PREFETCHW },       // 3DNow! PREFETCH on AMD, NOP on Intel
-   /* 0F 0E /dr */ { 0, BX_IA_FEMMS },           // 3DNow! FEMMS
- #if BX_SUPPORT_3DNOW
--  /* 0F 0F /dr */ { BxImmediate_Ib, BX_IA_ERROR, Bx3DNowOpcodeInfo },
-+  /* 0F 0F /dr */ { BxImmediate_Ib, BX_IA_ERROR },
- #else
-   /* 0F 0F /dr */ { 0, BX_IA_ERROR },
- #endif
-@@ -1583,7 +1583,7 @@
-   /* 0F 0D /wm */ { 0, BX_IA_PREFETCHW },       // 3DNow! PREFETCH on AMD, NOP on Intel
-   /* 0F 0E /wm */ { 0, BX_IA_FEMMS },           // 3DNow! FEMMS
- #if BX_SUPPORT_3DNOW
--  /* 0F 0F /wm */ { BxImmediate_Ib, BX_IA_ERROR, Bx3DNowOpcodeInfo },
-+  /* 0F 0F /wm */ { BxImmediate_Ib, BX_IA_ERROR },
- #else
-   /* 0F 0F /wm */ { 0, BX_IA_ERROR },
- #endif
-@@ -2134,7 +2134,7 @@
-   /* 0F 0D /dm */ { 0, BX_IA_PREFETCHW },       // 3DNow! PREFETCH on AMD, NOP on Intel
-   /* 0F 0E /dm */ { 0, BX_IA_FEMMS },           // 3DNow! FEMMS
- #if BX_SUPPORT_3DNOW
--  /* 0F 0F /dm */ { BxImmediate_Ib, BX_IA_ERROR, Bx3DNowOpcodeInfo },
-+  /* 0F 0F /dm */ { BxImmediate_Ib, BX_IA_ERROR },
- #else
-   /* 0F 0F /dm */ { 0, BX_IA_ERROR },
- #endif
diff --git a/extra/celestia/libpng14.patch b/extra/celestia/libpng14.patch
deleted file mode 100644
index 1d47637b9..000000000
--- a/extra/celestia/libpng14.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -Nur celestia-1.6.0.orig/src/celengine/image.cpp celestia-1.6.0/src/celengine/image.cpp
---- celestia-1.6.0.orig/src/celengine/image.cpp	2009-06-22 18:44:08.000000000 +0300
-+++ celestia-1.6.0/src/celengine/image.cpp	2010-01-18 23:27:55.000000000 +0200
-@@ -737,7 +737,7 @@
- 
-     if (color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8)
-     {
--        png_set_gray_1_2_4_to_8(png_ptr);
-+        png_set_expand_gray_1_2_4_to_8(png_ptr);
-     }
- 
-     if (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS))
diff --git a/extra/fbida/ChangeLog b/extra/fbida/ChangeLog
deleted file mode 100644
index 7e67308c0..000000000
--- a/extra/fbida/ChangeLog
+++ /dev/null
@@ -1,21 +0,0 @@
-2010-03-02  Eric Belanger  <eric@archlinux.org>
-
-	* fbida 2.07-5
-	* Fixed exiftran (close FS#18302)
-	* Removed backup array
-
-2010-01-17  Eric Belanger  <eric@archlinux.org>
-
-	* fbida 2.07-4
-	* Rebuilt for libpng 1.4 and libjpeg 8
-
-2009-08-10  Eric Belanger  <eric@archlinux.org>
-
-	* fbida 2.07-3
-	* Fixed compatibility problem with libjpeg 7 (close FS#15875)
-
-2009-07-01  Eric Belanger  <eric@archlinux.org>
-
-	* fbida 2.07-2
-	* Rebuild against libjpeg 7
-	* Added ChangeLog
diff --git a/extra/fbida/jinclude.h b/extra/fbida/jinclude.h
deleted file mode 100644
index 0a4f15146..000000000
--- a/extra/fbida/jinclude.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * jinclude.h
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file exists to provide a single place to fix any problems with
- * including the wrong system include files.  (Common problems are taken
- * care of by the standard jconfig symbols, but on really weird systems
- * you may have to edit this file.)
- *
- * NOTE: this file is NOT intended to be included by applications using the
- * JPEG library.  Most applications need only include jpeglib.h.
- */
-
-
-/* Include auto-config file to find out which system include files we need. */
-
-#include "jconfig.h"		/* auto configuration options */
-#define JCONFIG_INCLUDED	/* so that jpeglib.h doesn't do it again */
-
-/*
- * We need the NULL macro and size_t typedef.
- * On an ANSI-conforming system it is sufficient to include <stddef.h>.
- * Otherwise, we get them from <stdlib.h> or <stdio.h>; we may have to
- * pull in <sys/types.h> as well.
- * Note that the core JPEG library does not require <stdio.h>;
- * only the default error handler and data source/destination modules do.
- * But we must pull it in because of the references to FILE in jpeglib.h.
- * You can remove those references if you want to compile without <stdio.h>.
- */
-
-#ifdef HAVE_STDDEF_H
-#include <stddef.h>
-#endif
-
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#ifdef NEED_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-#include <stdio.h>
-
-/*
- * We need memory copying and zeroing functions, plus strncpy().
- * ANSI and System V implementations declare these in <string.h>.
- * BSD doesn't have the mem() functions, but it does have bcopy()/bzero().
- * Some systems may declare memset and memcpy in <memory.h>.
- *
- * NOTE: we assume the size parameters to these functions are of type size_t.
- * Change the casts in these macros if not!
- */
-
-#ifdef NEED_BSD_STRINGS
-
-#include <strings.h>
-#define MEMZERO(target,size)	bzero((void *)(target), (size_t)(size))
-#define MEMCOPY(dest,src,size)	bcopy((const void *)(src), (void *)(dest), (size_t)(size))
-
-#else /* not BSD, assume ANSI/SysV string lib */
-
-#include <string.h>
-#define MEMZERO(target,size)	memset((void *)(target), 0, (size_t)(size))
-#define MEMCOPY(dest,src,size)	memcpy((void *)(dest), (const void *)(src), (size_t)(size))
-
-#endif
-
-/*
- * In ANSI C, and indeed any rational implementation, size_t is also the
- * type returned by sizeof().  However, it seems there are some irrational
- * implementations out there, in which sizeof() returns an int even though
- * size_t is defined as long or unsigned long.  To ensure consistent results
- * we always use this SIZEOF() macro in place of using sizeof() directly.
- */
-
-#define SIZEOF(object)	((size_t) sizeof(object))
-
-/*
- * The modules that use fread() and fwrite() always invoke them through
- * these macros.  On some systems you may need to twiddle the argument casts.
- * CAUTION: argument order is different from underlying functions!
- */
-
-#define JFREAD(file,buf,sizeofbuf)  \
-  ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
-#define JFWRITE(file,buf,sizeofbuf)  \
-  ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
diff --git a/extra/fbida/libpng-1.4.patch b/extra/fbida/libpng-1.4.patch
deleted file mode 100644
index f8a80d4b2..000000000
--- a/extra/fbida/libpng-1.4.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-diff -Naur fbida-2.07-orig/rd/read-png.c fbida-2.07/rd/read-png.c
---- fbida-2.07-orig/rd/read-png.c	2010-01-18 00:02:02.000000000 -0500
-+++ fbida-2.07/rd/read-png.c	2010-01-18 00:06:09.000000000 -0500
-@@ -69,8 +69,11 @@
-     if (h->color_type == PNG_COLOR_TYPE_PALETTE)
- 	png_set_palette_to_rgb(h->png);
-     if (h->color_type == PNG_COLOR_TYPE_GRAY && bit_depth < 8)
--	png_set_gray_1_2_4_to_8(h->png);
--
-+#if PNG_LIBPNG_VER < 10400
-+      png_set_gray_1_2_4_to_8(h->png);
-+#else
-+    png_set_expand_gray_1_2_4_to_8(h->png);
-+#endif
-     if (png_get_bKGD(h->png, h->info, &file_bg)) {
- 	png_set_background(h->png,file_bg,PNG_BACKGROUND_GAMMA_FILE,1,1.0);
-     } else {
diff --git a/extra/fbida/transupp.c b/extra/fbida/transupp.c
deleted file mode 100644
index 406054482..000000000
--- a/extra/fbida/transupp.c
+++ /dev/null
@@ -1,1583 +0,0 @@
-/*
- * transupp.c
- *
- * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains image transformation routines and other utility code
- * used by the jpegtran sample application.  These are NOT part of the core
- * JPEG library.  But we keep these routines separate from jpegtran.c to
- * ease the task of maintaining jpegtran-like programs that have other user
- * interfaces.
- */
-
-/* Although this file really shouldn't have access to the library internals,
- * it's helpful to let it call jround_up() and jcopy_block_row().
- */
-#define JPEG_INTERNALS
-
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "transupp.h"		/* My own external interface */
-#include <ctype.h>		/* to declare isdigit() */
-
-
-#if TRANSFORMS_SUPPORTED
-
-/*
- * Lossless image transformation routines.  These routines work on DCT
- * coefficient arrays and thus do not require any lossy decompression
- * or recompression of the image.
- * Thanks to Guido Vollbeding for the initial design and code of this feature,
- * and to Ben Jackson for introducing the cropping feature.
- *
- * Horizontal flipping is done in-place, using a single top-to-bottom
- * pass through the virtual source array.  It will thus be much the
- * fastest option for images larger than main memory.
- *
- * The other routines require a set of destination virtual arrays, so they
- * need twice as much memory as jpegtran normally does.  The destination
- * arrays are always written in normal scan order (top to bottom) because
- * the virtual array manager expects this.  The source arrays will be scanned
- * in the corresponding order, which means multiple passes through the source
- * arrays for most of the transforms.  That could result in much thrashing
- * if the image is larger than main memory.
- *
- * If cropping or trimming is involved, the destination arrays may be smaller
- * than the source arrays.  Note it is not possible to do horizontal flip
- * in-place when a nonzero Y crop offset is specified, since we'd have to move
- * data from one block row to another but the virtual array manager doesn't
- * guarantee we can touch more than one row at a time.  So in that case,
- * we have to use a separate destination array.
- *
- * Some notes about the operating environment of the individual transform
- * routines:
- * 1. Both the source and destination virtual arrays are allocated from the
- *    source JPEG object, and therefore should be manipulated by calling the
- *    source's memory manager.
- * 2. The destination's component count should be used.  It may be smaller
- *    than the source's when forcing to grayscale.
- * 3. Likewise the destination's sampling factors should be used.  When
- *    forcing to grayscale the destination's sampling factors will be all 1,
- *    and we may as well take that as the effective iMCU size.
- * 4. When "trim" is in effect, the destination's dimensions will be the
- *    trimmed values but the source's will be untrimmed.
- * 5. When "crop" is in effect, the destination's dimensions will be the
- *    cropped values but the source's will be uncropped.  Each transform
- *    routine is responsible for picking up source data starting at the
- *    correct X and Y offset for the crop region.  (The X and Y offsets
- *    passed to the transform routines are measured in iMCU blocks of the
- *    destination.)
- * 6. All the routines assume that the source and destination buffers are
- *    padded out to a full iMCU boundary.  This is true, although for the
- *    source buffer it is an undocumented property of jdcoefct.c.
- */
-
-
-LOCAL(void)
-do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	 jvirt_barray_ptr *src_coef_arrays,
-	 jvirt_barray_ptr *dst_coef_arrays)
-/* Crop.  This is only used when no rotate/flip is requested with the crop. */
-{
-  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
-  int ci, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  jpeg_component_info *compptr;
-
-  /* We simply have to copy the right amount of data (the destination's
-   * image size) starting at the given X and Y offsets in the source.
-   */
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      src_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	 dst_blk_y + y_crop_blocks,
-	 (JDIMENSION) compptr->v_samp_factor, FALSE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
-			dst_buffer[offset_y],
-			compptr->width_in_blocks);
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-		   JDIMENSION x_crop_offset,
-		   jvirt_barray_ptr *src_coef_arrays)
-/* Horizontal flip; done in-place, so no separate dest array is required.
- * NB: this only works when y_crop_offset is zero.
- */
-{
-  JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks;
-  int ci, k, offset_y;
-  JBLOCKARRAY buffer;
-  JCOEFPTR ptr1, ptr2;
-  JCOEF temp1, temp2;
-  jpeg_component_info *compptr;
-
-  /* Horizontal mirroring of DCT blocks is accomplished by swapping
-   * pairs of blocks in-place.  Within a DCT block, we perform horizontal
-   * mirroring by changing the signs of odd-numbered columns.
-   * Partial iMCUs at the right edge are left untouched.
-   */
-  MCU_cols = srcinfo->output_width /
-    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    for (blk_y = 0; blk_y < compptr->height_in_blocks;
-	 blk_y += compptr->v_samp_factor) {
-      buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	/* Do the mirroring */
-	for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
-	  ptr1 = buffer[offset_y][blk_x];
-	  ptr2 = buffer[offset_y][comp_width - blk_x - 1];
-	  /* this unrolled loop doesn't need to know which row it's on... */
-	  for (k = 0; k < DCTSIZE2; k += 2) {
-	    temp1 = *ptr1;	/* swap even column */
-	    temp2 = *ptr2;
-	    *ptr1++ = temp2;
-	    *ptr2++ = temp1;
-	    temp1 = *ptr1;	/* swap odd column with sign change */
-	    temp2 = *ptr2;
-	    *ptr1++ = -temp2;
-	    *ptr2++ = -temp1;
-	  }
-	}
-	if (x_crop_blocks > 0) {
-	  /* Now left-justify the portion of the data to be kept.
-	   * We can't use a single jcopy_block_row() call because that routine
-	   * depends on memcpy(), whose behavior is unspecified for overlapping
-	   * source and destination areas.  Sigh.
-	   */
-	  for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
-	    jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks,
-			    buffer[offset_y] + blk_x,
-			    (JDIMENSION) 1);
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	   jvirt_barray_ptr *src_coef_arrays,
-	   jvirt_barray_ptr *dst_coef_arrays)
-/* Horizontal flip in general cropping case */
-{
-  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
-  JDIMENSION x_crop_blocks, y_crop_blocks;
-  int ci, k, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JBLOCKROW src_row_ptr, dst_row_ptr;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Here we must output into a separate array because we can't touch
-   * different rows of a single virtual array simultaneously.  Otherwise,
-   * this is essentially the same as the routine above.
-   */
-  MCU_cols = srcinfo->output_width /
-    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      src_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	 dst_blk_y + y_crop_blocks,
-	 (JDIMENSION) compptr->v_samp_factor, FALSE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	dst_row_ptr = dst_buffer[offset_y];
-	src_row_ptr = src_buffer[offset_y];
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	  if (x_crop_blocks + dst_blk_x < comp_width) {
-	    /* Do the mirrorable blocks */
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
-	    /* this unrolled loop doesn't need to know which row it's on... */
-	    for (k = 0; k < DCTSIZE2; k += 2) {
-	      *dst_ptr++ = *src_ptr++;	 /* copy even column */
-	      *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */
-	    }
-	  } else {
-	    /* Copy last partial block(s) verbatim */
-	    jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
-			    dst_row_ptr + dst_blk_x,
-			    (JDIMENSION) 1);
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	   jvirt_barray_ptr *src_coef_arrays,
-	   jvirt_barray_ptr *dst_coef_arrays)
-/* Vertical flip */
-{
-  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
-  JDIMENSION x_crop_blocks, y_crop_blocks;
-  int ci, i, j, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JBLOCKROW src_row_ptr, dst_row_ptr;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* We output into a separate array because we can't touch different
-   * rows of the source virtual array simultaneously.  Otherwise, this
-   * is a pretty straightforward analog of horizontal flip.
-   * Within a DCT block, vertical mirroring is done by changing the signs
-   * of odd-numbered rows.
-   * Partial iMCUs at the bottom edge are copied verbatim.
-   */
-  MCU_rows = srcinfo->output_height /
-    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      if (y_crop_blocks + dst_blk_y < comp_height) {
-	/* Row is within the mirrorable area. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   comp_height - y_crop_blocks - dst_blk_y -
-	   (JDIMENSION) compptr->v_samp_factor,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      } else {
-	/* Bottom-edge blocks will be copied verbatim. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   dst_blk_y + y_crop_blocks,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      }
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	if (y_crop_blocks + dst_blk_y < comp_height) {
-	  /* Row is within the mirrorable area. */
-	  dst_row_ptr = dst_buffer[offset_y];
-	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
-	  src_row_ptr += x_crop_blocks;
-	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	       dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[dst_blk_x];
-	    for (i = 0; i < DCTSIZE; i += 2) {
-	      /* copy even row */
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = *src_ptr++;
-	      /* copy odd row with sign change */
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = - *src_ptr++;
-	    }
-	  }
-	} else {
-	  /* Just copy row verbatim. */
-	  jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
-			  dst_buffer[offset_y],
-			  compptr->width_in_blocks);
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	      JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	      jvirt_barray_ptr *src_coef_arrays,
-	      jvirt_barray_ptr *dst_coef_arrays)
-/* Transpose source into destination */
-{
-  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Transposing pixels within a block just requires transposing the
-   * DCT coefficients.
-   * Partial iMCUs at the edges require no special treatment; we simply
-   * process all the available DCT blocks for every component.
-   */
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	     dst_blk_x + x_crop_blocks,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks];
-	    for (i = 0; i < DCTSIZE; i++)
-	      for (j = 0; j < DCTSIZE; j++)
-		dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	   jvirt_barray_ptr *src_coef_arrays,
-	   jvirt_barray_ptr *dst_coef_arrays)
-/* 90 degree rotation is equivalent to
- *   1. Transposing the image;
- *   2. Horizontal mirroring.
- * These two steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
-  JDIMENSION x_crop_blocks, y_crop_blocks;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Because of the horizontal mirror step, we can't process partial iMCUs
-   * at the (output) right edge properly.  They just get transposed and
-   * not mirrored.
-   */
-  MCU_cols = srcinfo->output_height /
-    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  if (x_crop_blocks + dst_blk_x < comp_width) {
-	    /* Block is within the mirrorable area. */
-	    src_buffer = (*srcinfo->mem->access_virt_barray)
-	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	       comp_width - x_crop_blocks - dst_blk_x -
-	       (JDIMENSION) compptr->h_samp_factor,
-	       (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  } else {
-	    /* Edge blocks are transposed but not mirrored. */
-	    src_buffer = (*srcinfo->mem->access_virt_barray)
-	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	       dst_blk_x + x_crop_blocks,
-	       (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  }
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    if (x_crop_blocks + dst_blk_x < comp_width) {
-	      /* Block is within the mirrorable area. */
-	      src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
-		[dst_blk_y + offset_y + y_crop_blocks];
-	      for (i = 0; i < DCTSIZE; i++) {
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		i++;
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-	      }
-	    } else {
-	      /* Edge blocks are transposed but not mirrored. */
-	      src_ptr = src_buffer[offset_x]
-		[dst_blk_y + offset_y + y_crop_blocks];
-	      for (i = 0; i < DCTSIZE; i++)
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	    jvirt_barray_ptr *src_coef_arrays,
-	    jvirt_barray_ptr *dst_coef_arrays)
-/* 270 degree rotation is equivalent to
- *   1. Horizontal mirroring;
- *   2. Transposing the image.
- * These two steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
-  JDIMENSION x_crop_blocks, y_crop_blocks;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Because of the horizontal mirror step, we can't process partial iMCUs
-   * at the (output) bottom edge properly.  They just get transposed and
-   * not mirrored.
-   */
-  MCU_rows = srcinfo->output_width /
-    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	     dst_blk_x + x_crop_blocks,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    if (y_crop_blocks + dst_blk_y < comp_height) {
-	      /* Block is within the mirrorable area. */
-	      src_ptr = src_buffer[offset_x]
-		[comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
-	      for (i = 0; i < DCTSIZE; i++) {
-		for (j = 0; j < DCTSIZE; j++) {
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		  j++;
-		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		}
-	      }
-	    } else {
-	      /* Edge blocks are transposed but not mirrored. */
-	      src_ptr = src_buffer[offset_x]
-		[dst_blk_y + offset_y + y_crop_blocks];
-	      for (i = 0; i < DCTSIZE; i++)
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	    jvirt_barray_ptr *src_coef_arrays,
-	    jvirt_barray_ptr *dst_coef_arrays)
-/* 180 degree rotation is equivalent to
- *   1. Vertical mirroring;
- *   2. Horizontal mirroring.
- * These two steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
-  JDIMENSION x_crop_blocks, y_crop_blocks;
-  int ci, i, j, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JBLOCKROW src_row_ptr, dst_row_ptr;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  MCU_cols = srcinfo->output_width /
-    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
-  MCU_rows = srcinfo->output_height /
-    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      if (y_crop_blocks + dst_blk_y < comp_height) {
-	/* Row is within the vertically mirrorable area. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   comp_height - y_crop_blocks - dst_blk_y -
-	   (JDIMENSION) compptr->v_samp_factor,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      } else {
-	/* Bottom-edge rows are only mirrored horizontally. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   dst_blk_y + y_crop_blocks,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      }
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	dst_row_ptr = dst_buffer[offset_y];
-	if (y_crop_blocks + dst_blk_y < comp_height) {
-	  /* Row is within the mirrorable area. */
-	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
-	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    if (x_crop_blocks + dst_blk_x < comp_width) {
-	      /* Process the blocks that can be mirrored both ways. */
-	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
-	      for (i = 0; i < DCTSIZE; i += 2) {
-		/* For even row, negate every odd column. */
-		for (j = 0; j < DCTSIZE; j += 2) {
-		  *dst_ptr++ = *src_ptr++;
-		  *dst_ptr++ = - *src_ptr++;
-		}
-		/* For odd row, negate every even column. */
-		for (j = 0; j < DCTSIZE; j += 2) {
-		  *dst_ptr++ = - *src_ptr++;
-		  *dst_ptr++ = *src_ptr++;
-		}
-	      }
-	    } else {
-	      /* Any remaining right-edge blocks are only mirrored vertically. */
-	      src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x];
-	      for (i = 0; i < DCTSIZE; i += 2) {
-		for (j = 0; j < DCTSIZE; j++)
-		  *dst_ptr++ = *src_ptr++;
-		for (j = 0; j < DCTSIZE; j++)
-		  *dst_ptr++ = - *src_ptr++;
-	      }
-	    }
-	  }
-	} else {
-	  /* Remaining rows are just mirrored horizontally. */
-	  src_row_ptr = src_buffer[offset_y];
-	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	    if (x_crop_blocks + dst_blk_x < comp_width) {
-	      /* Process the blocks that can be mirrored. */
-	      dst_ptr = dst_row_ptr[dst_blk_x];
-	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
-	      for (i = 0; i < DCTSIZE2; i += 2) {
-		*dst_ptr++ = *src_ptr++;
-		*dst_ptr++ = - *src_ptr++;
-	      }
-	    } else {
-	      /* Any remaining right-edge blocks are only copied. */
-	      jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
-			      dst_row_ptr + dst_blk_x,
-			      (JDIMENSION) 1);
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	       JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
-	       jvirt_barray_ptr *src_coef_arrays,
-	       jvirt_barray_ptr *dst_coef_arrays)
-/* Transverse transpose is equivalent to
- *   1. 180 degree rotation;
- *   2. Transposition;
- * or
- *   1. Horizontal mirroring;
- *   2. Transposition;
- *   3. Horizontal mirroring.
- * These steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
-  JDIMENSION x_crop_blocks, y_crop_blocks;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  MCU_cols = srcinfo->output_height /
-    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
-  MCU_rows = srcinfo->output_width /
-    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
-    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  if (x_crop_blocks + dst_blk_x < comp_width) {
-	    /* Block is within the mirrorable area. */
-	    src_buffer = (*srcinfo->mem->access_virt_barray)
-	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	       comp_width - x_crop_blocks - dst_blk_x -
-	       (JDIMENSION) compptr->h_samp_factor,
-	       (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  } else {
-	    src_buffer = (*srcinfo->mem->access_virt_barray)
-	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	       dst_blk_x + x_crop_blocks,
-	       (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  }
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    if (y_crop_blocks + dst_blk_y < comp_height) {
-	      if (x_crop_blocks + dst_blk_x < comp_width) {
-		/* Block is within the mirrorable area. */
-		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
-		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
-		for (i = 0; i < DCTSIZE; i++) {
-		  for (j = 0; j < DCTSIZE; j++) {
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		    j++;
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		  }
-		  i++;
-		  for (j = 0; j < DCTSIZE; j++) {
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		    j++;
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		  }
-		}
-	      } else {
-		/* Right-edge blocks are mirrored in y only */
-		src_ptr = src_buffer[offset_x]
-		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
-		for (i = 0; i < DCTSIZE; i++) {
-		  for (j = 0; j < DCTSIZE; j++) {
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		    j++;
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		  }
-		}
-	      }
-	    } else {
-	      if (x_crop_blocks + dst_blk_x < comp_width) {
-		/* Bottom-edge blocks are mirrored in x only */
-		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
-		  [dst_blk_y + offset_y + y_crop_blocks];
-		for (i = 0; i < DCTSIZE; i++) {
-		  for (j = 0; j < DCTSIZE; j++)
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		  i++;
-		  for (j = 0; j < DCTSIZE; j++)
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		}
-	      } else {
-		/* At lower right corner, just transpose, no mirroring */
-		src_ptr = src_buffer[offset_x]
-		  [dst_blk_y + offset_y + y_crop_blocks];
-		for (i = 0; i < DCTSIZE; i++)
-		  for (j = 0; j < DCTSIZE; j++)
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	      }
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec.
- * Returns TRUE if valid integer found, FALSE if not.
- * *strptr is advanced over the digit string, and *result is set to its value.
- */
-
-LOCAL(boolean)
-jt_read_integer (const char ** strptr, JDIMENSION * result)
-{
-  const char * ptr = *strptr;
-  JDIMENSION val = 0;
-
-  for (; isdigit(*ptr); ptr++) {
-    val = val * 10 + (JDIMENSION) (*ptr - '0');
-  }
-  *result = val;
-  if (ptr == *strptr)
-    return FALSE;		/* oops, no digits */
-  *strptr = ptr;
-  return TRUE;
-}
-
-
-/* Parse a crop specification (written in X11 geometry style).
- * The routine returns TRUE if the spec string is valid, FALSE if not.
- *
- * The crop spec string should have the format
- *	<width>x<height>{+-}<xoffset>{+-}<yoffset>
- * where width, height, xoffset, and yoffset are unsigned integers.
- * Each of the elements can be omitted to indicate a default value.
- * (A weakness of this style is that it is not possible to omit xoffset
- * while specifying yoffset, since they look alike.)
- *
- * This code is loosely based on XParseGeometry from the X11 distribution.
- */
-
-GLOBAL(boolean)
-jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec)
-{
-  info->crop = FALSE;
-  info->crop_width_set = JCROP_UNSET;
-  info->crop_height_set = JCROP_UNSET;
-  info->crop_xoffset_set = JCROP_UNSET;
-  info->crop_yoffset_set = JCROP_UNSET;
-
-  if (isdigit(*spec)) {
-    /* fetch width */
-    if (! jt_read_integer(&spec, &info->crop_width))
-      return FALSE;
-    info->crop_width_set = JCROP_POS;
-  }
-  if (*spec == 'x' || *spec == 'X') {	
-    /* fetch height */
-    spec++;
-    if (! jt_read_integer(&spec, &info->crop_height))
-      return FALSE;
-    info->crop_height_set = JCROP_POS;
-  }
-  if (*spec == '+' || *spec == '-') {
-    /* fetch xoffset */
-    info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
-    spec++;
-    if (! jt_read_integer(&spec, &info->crop_xoffset))
-      return FALSE;
-  }
-  if (*spec == '+' || *spec == '-') {
-    /* fetch yoffset */
-    info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
-    spec++;
-    if (! jt_read_integer(&spec, &info->crop_yoffset))
-      return FALSE;
-  }
-  /* We had better have gotten to the end of the string. */
-  if (*spec != '\0')
-    return FALSE;
-  info->crop = TRUE;
-  return TRUE;
-}
-
-
-/* Trim off any partial iMCUs on the indicated destination edge */
-
-LOCAL(void)
-trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width)
-{
-  JDIMENSION MCU_cols;
-
-  MCU_cols = info->output_width / info->iMCU_sample_width;
-  if (MCU_cols > 0 && info->x_crop_offset + MCU_cols ==
-      full_width / info->iMCU_sample_width)
-    info->output_width = MCU_cols * info->iMCU_sample_width;
-}
-
-LOCAL(void)
-trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height)
-{
-  JDIMENSION MCU_rows;
-
-  MCU_rows = info->output_height / info->iMCU_sample_height;
-  if (MCU_rows > 0 && info->y_crop_offset + MCU_rows ==
-      full_height / info->iMCU_sample_height)
-    info->output_height = MCU_rows * info->iMCU_sample_height;
-}
-
-
-/* Request any required workspace.
- *
- * This routine figures out the size that the output image will be
- * (which implies that all the transform parameters must be set before
- * it is called).
- *
- * We allocate the workspace virtual arrays from the source decompression
- * object, so that all the arrays (both the original data and the workspace)
- * will be taken into account while making memory management decisions.
- * Hence, this routine must be called after jpeg_read_header (which reads
- * the image dimensions) and before jpeg_read_coefficients (which realizes
- * the source's virtual arrays).
- *
- * This function returns FALSE right away if -perfect is given
- * and transformation is not perfect.  Otherwise returns TRUE.
- */
-
-GLOBAL(boolean)
-jtransform_request_workspace (j_decompress_ptr srcinfo,
-			      jpeg_transform_info *info)
-{
-  jvirt_barray_ptr *coef_arrays;
-  boolean need_workspace, transpose_it;
-  jpeg_component_info *compptr;
-  JDIMENSION xoffset, yoffset;
-  JDIMENSION width_in_iMCUs, height_in_iMCUs;
-  JDIMENSION width_in_blocks, height_in_blocks;
-  int ci, h_samp_factor, v_samp_factor;
-
-  /* Determine number of components in output image */
-  if (info->force_grayscale &&
-      srcinfo->jpeg_color_space == JCS_YCbCr &&
-      srcinfo->num_components == 3)
-    /* We'll only process the first component */
-    info->num_components = 1;
-  else
-    /* Process all the components */
-    info->num_components = srcinfo->num_components;
-
-  /* Compute output image dimensions and related values. */
-  jpeg_core_output_dimensions(srcinfo);
-
-  /* Return right away if -perfect is given and transformation is not perfect.
-   */
-  if (info->perfect) {
-    if (info->num_components == 1) {
-      if (!jtransform_perfect_transform(srcinfo->output_width,
-	  srcinfo->output_height,
-	  srcinfo->min_DCT_h_scaled_size,
-	  srcinfo->min_DCT_v_scaled_size,
-	  info->transform))
-	return FALSE;
-    } else {
-      if (!jtransform_perfect_transform(srcinfo->output_width,
-	  srcinfo->output_height,
-	  srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size,
-	  srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size,
-	  info->transform))
-	return FALSE;
-    }
-  }
-
-  /* If there is only one output component, force the iMCU size to be 1;
-   * else use the source iMCU size.  (This allows us to do the right thing
-   * when reducing color to grayscale, and also provides a handy way of
-   * cleaning up "funny" grayscale images whose sampling factors are not 1x1.)
-   */
-  switch (info->transform) {
-  case JXFORM_TRANSPOSE:
-  case JXFORM_TRANSVERSE:
-  case JXFORM_ROT_90:
-  case JXFORM_ROT_270:
-    info->output_width = srcinfo->output_height;
-    info->output_height = srcinfo->output_width;
-    if (info->num_components == 1) {
-      info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size;
-      info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size;
-    } else {
-      info->iMCU_sample_width =
-	srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size;
-      info->iMCU_sample_height =
-	srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size;
-    }
-    break;
-  default:
-    info->output_width = srcinfo->output_width;
-    info->output_height = srcinfo->output_height;
-    if (info->num_components == 1) {
-      info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size;
-      info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size;
-    } else {
-      info->iMCU_sample_width =
-	srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size;
-      info->iMCU_sample_height =
-	srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size;
-    }
-    break;
-  }
-
-  /* If cropping has been requested, compute the crop area's position and
-   * dimensions, ensuring that its upper left corner falls at an iMCU boundary.
-   */
-  if (info->crop) {
-    /* Insert default values for unset crop parameters */
-    if (info->crop_xoffset_set == JCROP_UNSET)
-      info->crop_xoffset = 0;	/* default to +0 */
-    if (info->crop_yoffset_set == JCROP_UNSET)
-      info->crop_yoffset = 0;	/* default to +0 */
-    if (info->crop_xoffset >= info->output_width ||
-	info->crop_yoffset >= info->output_height)
-      ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
-    if (info->crop_width_set == JCROP_UNSET)
-      info->crop_width = info->output_width - info->crop_xoffset;
-    if (info->crop_height_set == JCROP_UNSET)
-      info->crop_height = info->output_height - info->crop_yoffset;
-    /* Ensure parameters are valid */
-    if (info->crop_width <= 0 || info->crop_width > info->output_width ||
-	info->crop_height <= 0 || info->crop_height > info->output_height ||
-	info->crop_xoffset > info->output_width - info->crop_width ||
-	info->crop_yoffset > info->output_height - info->crop_height)
-      ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
-    /* Convert negative crop offsets into regular offsets */
-    if (info->crop_xoffset_set == JCROP_NEG)
-      xoffset = info->output_width - info->crop_width - info->crop_xoffset;
-    else
-      xoffset = info->crop_xoffset;
-    if (info->crop_yoffset_set == JCROP_NEG)
-      yoffset = info->output_height - info->crop_height - info->crop_yoffset;
-    else
-      yoffset = info->crop_yoffset;
-    /* Now adjust so that upper left corner falls at an iMCU boundary */
-    info->output_width =
-      info->crop_width + (xoffset % info->iMCU_sample_width);
-    info->output_height =
-      info->crop_height + (yoffset % info->iMCU_sample_height);
-    /* Save x/y offsets measured in iMCUs */
-    info->x_crop_offset = xoffset / info->iMCU_sample_width;
-    info->y_crop_offset = yoffset / info->iMCU_sample_height;
-  } else {
-    info->x_crop_offset = 0;
-    info->y_crop_offset = 0;
-  }
-
-  /* Figure out whether we need workspace arrays,
-   * and if so whether they are transposed relative to the source.
-   */
-  need_workspace = FALSE;
-  transpose_it = FALSE;
-  switch (info->transform) {
-  case JXFORM_NONE:
-    if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
-      need_workspace = TRUE;
-    /* No workspace needed if neither cropping nor transforming */
-    break;
-  case JXFORM_FLIP_H:
-    if (info->trim)
-      trim_right_edge(info, srcinfo->output_width);
-    if (info->y_crop_offset != 0)
-      need_workspace = TRUE;
-    /* do_flip_h_no_crop doesn't need a workspace array */
-    break;
-  case JXFORM_FLIP_V:
-    if (info->trim)
-      trim_bottom_edge(info, srcinfo->output_height);
-    /* Need workspace arrays having same dimensions as source image. */
-    need_workspace = TRUE;
-    break;
-  case JXFORM_TRANSPOSE:
-    /* transpose does NOT have to trim anything */
-    /* Need workspace arrays having transposed dimensions. */
-    need_workspace = TRUE;
-    transpose_it = TRUE;
-    break;
-  case JXFORM_TRANSVERSE:
-    if (info->trim) {
-      trim_right_edge(info, srcinfo->output_height);
-      trim_bottom_edge(info, srcinfo->output_width);
-    }
-    /* Need workspace arrays having transposed dimensions. */
-    need_workspace = TRUE;
-    transpose_it = TRUE;
-    break;
-  case JXFORM_ROT_90:
-    if (info->trim)
-      trim_right_edge(info, srcinfo->output_height);
-    /* Need workspace arrays having transposed dimensions. */
-    need_workspace = TRUE;
-    transpose_it = TRUE;
-    break;
-  case JXFORM_ROT_180:
-    if (info->trim) {
-      trim_right_edge(info, srcinfo->output_width);
-      trim_bottom_edge(info, srcinfo->output_height);
-    }
-    /* Need workspace arrays having same dimensions as source image. */
-    need_workspace = TRUE;
-    break;
-  case JXFORM_ROT_270:
-    if (info->trim)
-      trim_bottom_edge(info, srcinfo->output_width);
-    /* Need workspace arrays having transposed dimensions. */
-    need_workspace = TRUE;
-    transpose_it = TRUE;
-    break;
-  }
-
-  /* Allocate workspace if needed.
-   * Note that we allocate arrays padded out to the next iMCU boundary,
-   * so that transform routines need not worry about missing edge blocks.
-   */
-  if (need_workspace) {
-    coef_arrays = (jvirt_barray_ptr *)
-      (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
-		SIZEOF(jvirt_barray_ptr) * info->num_components);
-    width_in_iMCUs = (JDIMENSION)
-      jdiv_round_up((long) info->output_width,
-		    (long) info->iMCU_sample_width);
-    height_in_iMCUs = (JDIMENSION)
-      jdiv_round_up((long) info->output_height,
-		    (long) info->iMCU_sample_height);
-    for (ci = 0; ci < info->num_components; ci++) {
-      compptr = srcinfo->comp_info + ci;
-      if (info->num_components == 1) {
-	/* we're going to force samp factors to 1x1 in this case */
-	h_samp_factor = v_samp_factor = 1;
-      } else if (transpose_it) {
-	h_samp_factor = compptr->v_samp_factor;
-	v_samp_factor = compptr->h_samp_factor;
-      } else {
-	h_samp_factor = compptr->h_samp_factor;
-	v_samp_factor = compptr->v_samp_factor;
-      }
-      width_in_blocks = width_in_iMCUs * h_samp_factor;
-      height_in_blocks = height_in_iMCUs * v_samp_factor;
-      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
-	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
-	 width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor);
-    }
-    info->workspace_coef_arrays = coef_arrays;
-  } else
-    info->workspace_coef_arrays = NULL;
-
-  return TRUE;
-}
-
-
-/* Transpose destination image parameters */
-
-LOCAL(void)
-transpose_critical_parameters (j_compress_ptr dstinfo)
-{
-  int tblno, i, j, ci, itemp;
-  jpeg_component_info *compptr;
-  JQUANT_TBL *qtblptr;
-  JDIMENSION jtemp;
-  UINT16 qtemp;
-
-  /* Transpose image dimensions */
-  jtemp = dstinfo->image_width;
-  dstinfo->image_width = dstinfo->image_height;
-  dstinfo->image_height = jtemp;
-  itemp = dstinfo->min_DCT_h_scaled_size;
-  dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size;
-  dstinfo->min_DCT_v_scaled_size = itemp;
-
-  /* Transpose sampling factors */
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    itemp = compptr->h_samp_factor;
-    compptr->h_samp_factor = compptr->v_samp_factor;
-    compptr->v_samp_factor = itemp;
-  }
-
-  /* Transpose quantization tables */
-  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
-    qtblptr = dstinfo->quant_tbl_ptrs[tblno];
-    if (qtblptr != NULL) {
-      for (i = 0; i < DCTSIZE; i++) {
-	for (j = 0; j < i; j++) {
-	  qtemp = qtblptr->quantval[i*DCTSIZE+j];
-	  qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i];
-	  qtblptr->quantval[j*DCTSIZE+i] = qtemp;
-	}
-      }
-    }
-  }
-}
-
-
-/* Adjust Exif image parameters.
- *
- * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible.
- */
-
-LOCAL(void)
-adjust_exif_parameters (JOCTET FAR * data, unsigned int length,
-			JDIMENSION new_width, JDIMENSION new_height)
-{
-  boolean is_motorola; /* Flag for byte order */
-  unsigned int number_of_tags, tagnum;
-  unsigned int firstoffset, offset;
-  JDIMENSION new_value;
-
-  if (length < 12) return; /* Length of an IFD entry */
-
-  /* Discover byte order */
-  if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49)
-    is_motorola = FALSE;
-  else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D)
-    is_motorola = TRUE;
-  else
-    return;
-
-  /* Check Tag Mark */
-  if (is_motorola) {
-    if (GETJOCTET(data[2]) != 0) return;
-    if (GETJOCTET(data[3]) != 0x2A) return;
-  } else {
-    if (GETJOCTET(data[3]) != 0) return;
-    if (GETJOCTET(data[2]) != 0x2A) return;
-  }
-
-  /* Get first IFD offset (offset to IFD0) */
-  if (is_motorola) {
-    if (GETJOCTET(data[4]) != 0) return;
-    if (GETJOCTET(data[5]) != 0) return;
-    firstoffset = GETJOCTET(data[6]);
-    firstoffset <<= 8;
-    firstoffset += GETJOCTET(data[7]);
-  } else {
-    if (GETJOCTET(data[7]) != 0) return;
-    if (GETJOCTET(data[6]) != 0) return;
-    firstoffset = GETJOCTET(data[5]);
-    firstoffset <<= 8;
-    firstoffset += GETJOCTET(data[4]);
-  }
-  if (firstoffset > length - 2) return; /* check end of data segment */
-
-  /* Get the number of directory entries contained in this IFD */
-  if (is_motorola) {
-    number_of_tags = GETJOCTET(data[firstoffset]);
-    number_of_tags <<= 8;
-    number_of_tags += GETJOCTET(data[firstoffset+1]);
-  } else {
-    number_of_tags = GETJOCTET(data[firstoffset+1]);
-    number_of_tags <<= 8;
-    number_of_tags += GETJOCTET(data[firstoffset]);
-  }
-  if (number_of_tags == 0) return;
-  firstoffset += 2;
-
-  /* Search for ExifSubIFD offset Tag in IFD0 */
-  for (;;) {
-    if (firstoffset > length - 12) return; /* check end of data segment */
-    /* Get Tag number */
-    if (is_motorola) {
-      tagnum = GETJOCTET(data[firstoffset]);
-      tagnum <<= 8;
-      tagnum += GETJOCTET(data[firstoffset+1]);
-    } else {
-      tagnum = GETJOCTET(data[firstoffset+1]);
-      tagnum <<= 8;
-      tagnum += GETJOCTET(data[firstoffset]);
-    }
-    if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */
-    if (--number_of_tags == 0) return;
-    firstoffset += 12;
-  }
-
-  /* Get the ExifSubIFD offset */
-  if (is_motorola) {
-    if (GETJOCTET(data[firstoffset+8]) != 0) return;
-    if (GETJOCTET(data[firstoffset+9]) != 0) return;
-    offset = GETJOCTET(data[firstoffset+10]);
-    offset <<= 8;
-    offset += GETJOCTET(data[firstoffset+11]);
-  } else {
-    if (GETJOCTET(data[firstoffset+11]) != 0) return;
-    if (GETJOCTET(data[firstoffset+10]) != 0) return;
-    offset = GETJOCTET(data[firstoffset+9]);
-    offset <<= 8;
-    offset += GETJOCTET(data[firstoffset+8]);
-  }
-  if (offset > length - 2) return; /* check end of data segment */
-
-  /* Get the number of directory entries contained in this SubIFD */
-  if (is_motorola) {
-    number_of_tags = GETJOCTET(data[offset]);
-    number_of_tags <<= 8;
-    number_of_tags += GETJOCTET(data[offset+1]);
-  } else {
-    number_of_tags = GETJOCTET(data[offset+1]);
-    number_of_tags <<= 8;
-    number_of_tags += GETJOCTET(data[offset]);
-  }
-  if (number_of_tags < 2) return;
-  offset += 2;
-
-  /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */
-  do {
-    if (offset > length - 12) return; /* check end of data segment */
-    /* Get Tag number */
-    if (is_motorola) {
-      tagnum = GETJOCTET(data[offset]);
-      tagnum <<= 8;
-      tagnum += GETJOCTET(data[offset+1]);
-    } else {
-      tagnum = GETJOCTET(data[offset+1]);
-      tagnum <<= 8;
-      tagnum += GETJOCTET(data[offset]);
-    }
-    if (tagnum == 0xA002 || tagnum == 0xA003) {
-      if (tagnum == 0xA002)
-	new_value = new_width; /* ExifImageWidth Tag */
-      else
-	new_value = new_height; /* ExifImageHeight Tag */
-      if (is_motorola) {
-	data[offset+2] = 0; /* Format = unsigned long (4 octets) */
-	data[offset+3] = 4;
-	data[offset+4] = 0; /* Number Of Components = 1 */
-	data[offset+5] = 0;
-	data[offset+6] = 0;
-	data[offset+7] = 1;
-	data[offset+8] = 0;
-	data[offset+9] = 0;
-	data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF);
-	data[offset+11] = (JOCTET)(new_value & 0xFF);
-      } else {
-	data[offset+2] = 4; /* Format = unsigned long (4 octets) */
-	data[offset+3] = 0;
-	data[offset+4] = 1; /* Number Of Components = 1 */
-	data[offset+5] = 0;
-	data[offset+6] = 0;
-	data[offset+7] = 0;
-	data[offset+8] = (JOCTET)(new_value & 0xFF);
-	data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF);
-	data[offset+10] = 0;
-	data[offset+11] = 0;
-      }
-    }
-    offset += 12;
-  } while (--number_of_tags);
-}
-
-
-/* Adjust output image parameters as needed.
- *
- * This must be called after jpeg_copy_critical_parameters()
- * and before jpeg_write_coefficients().
- *
- * The return value is the set of virtual coefficient arrays to be written
- * (either the ones allocated by jtransform_request_workspace, or the
- * original source data arrays).  The caller will need to pass this value
- * to jpeg_write_coefficients().
- */
-
-GLOBAL(jvirt_barray_ptr *)
-jtransform_adjust_parameters (j_decompress_ptr srcinfo,
-			      j_compress_ptr dstinfo,
-			      jvirt_barray_ptr *src_coef_arrays,
-			      jpeg_transform_info *info)
-{
-  /* If force-to-grayscale is requested, adjust destination parameters */
-  if (info->force_grayscale) {
-    /* First, ensure we have YCbCr or grayscale data, and that the source's
-     * Y channel is full resolution.  (No reasonable person would make Y
-     * be less than full resolution, so actually coping with that case
-     * isn't worth extra code space.  But we check it to avoid crashing.)
-     */
-    if (((dstinfo->jpeg_color_space == JCS_YCbCr &&
-	  dstinfo->num_components == 3) ||
-	 (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
-	  dstinfo->num_components == 1)) &&
-	srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor &&
-	srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) {
-      /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
-       * properly.  Among other things, it sets the target h_samp_factor &
-       * v_samp_factor to 1, which typically won't match the source.
-       * We have to preserve the source's quantization table number, however.
-       */
-      int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
-      jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
-      dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
-    } else {
-      /* Sorry, can't do it */
-      ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
-    }
-  } else if (info->num_components == 1) {
-    /* For a single-component source, we force the destination sampling factors
-     * to 1x1, with or without force_grayscale.  This is useful because some
-     * decoders choke on grayscale images with other sampling factors.
-     */
-    dstinfo->comp_info[0].h_samp_factor = 1;
-    dstinfo->comp_info[0].v_samp_factor = 1;
-  }
-
-  /* Correct the destination's image dimensions as necessary
-   * for rotate/flip, resize, and crop operations.
-   */
-  dstinfo->jpeg_width = info->output_width;
-  dstinfo->jpeg_height = info->output_height;
-
-  /* Transpose destination image parameters */
-  switch (info->transform) {
-  case JXFORM_TRANSPOSE:
-  case JXFORM_TRANSVERSE:
-  case JXFORM_ROT_90:
-  case JXFORM_ROT_270:
-    transpose_critical_parameters(dstinfo);
-    break;
-  default:
-    break;
-  }
-
-  /* Adjust Exif properties */
-  if (srcinfo->marker_list != NULL &&
-      srcinfo->marker_list->marker == JPEG_APP0+1 &&
-      srcinfo->marker_list->data_length >= 6 &&
-      GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 &&
-      GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 &&
-      GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 &&
-      GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 &&
-      GETJOCTET(srcinfo->marker_list->data[4]) == 0 &&
-      GETJOCTET(srcinfo->marker_list->data[5]) == 0) {
-    /* Suppress output of JFIF marker */
-    dstinfo->write_JFIF_header = FALSE;
-    /* Adjust Exif image parameters */
-    if (dstinfo->jpeg_width != srcinfo->image_width ||
-	dstinfo->jpeg_height != srcinfo->image_height)
-      /* Align data segment to start of TIFF structure for parsing */
-      adjust_exif_parameters(srcinfo->marker_list->data + 6,
-	srcinfo->marker_list->data_length - 6,
-	dstinfo->jpeg_width, dstinfo->jpeg_height);
-  }
-
-  /* Return the appropriate output data set */
-  if (info->workspace_coef_arrays != NULL)
-    return info->workspace_coef_arrays;
-  return src_coef_arrays;
-}
-
-
-/* Execute the actual transformation, if any.
- *
- * This must be called *after* jpeg_write_coefficients, because it depends
- * on jpeg_write_coefficients to have computed subsidiary values such as
- * the per-component width and height fields in the destination object.
- *
- * Note that some transformations will modify the source data arrays!
- */
-
-GLOBAL(void)
-jtransform_execute_transform (j_decompress_ptr srcinfo,
-			      j_compress_ptr dstinfo,
-			      jvirt_barray_ptr *src_coef_arrays,
-			      jpeg_transform_info *info)
-{
-  jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
-
-  /* Note: conditions tested here should match those in switch statement
-   * in jtransform_request_workspace()
-   */
-  switch (info->transform) {
-  case JXFORM_NONE:
-    if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
-      do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-	      src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_FLIP_H:
-    if (info->y_crop_offset != 0)
-      do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-		src_coef_arrays, dst_coef_arrays);
-    else
-      do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset,
-			src_coef_arrays);
-    break;
-  case JXFORM_FLIP_V:
-    do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-	      src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_TRANSPOSE:
-    do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-		 src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_TRANSVERSE:
-    do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-		  src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_ROT_90:
-    do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-	      src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_ROT_180:
-    do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-	       src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_ROT_270:
-    do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
-	       src_coef_arrays, dst_coef_arrays);
-    break;
-  }
-}
-
-/* jtransform_perfect_transform
- *
- * Determine whether lossless transformation is perfectly
- * possible for a specified image and transformation.
- *
- * Inputs:
- *   image_width, image_height: source image dimensions.
- *   MCU_width, MCU_height: pixel dimensions of MCU.
- *   transform: transformation identifier.
- * Parameter sources from initialized jpeg_struct
- * (after reading source header):
- *   image_width = cinfo.image_width
- *   image_height = cinfo.image_height
- *   MCU_width = cinfo.max_h_samp_factor * cinfo.block_size
- *   MCU_height = cinfo.max_v_samp_factor * cinfo.block_size
- * Result:
- *   TRUE = perfect transformation possible
- *   FALSE = perfect transformation not possible
- *           (may use custom action then)
- */
-
-GLOBAL(boolean)
-jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height,
-			     int MCU_width, int MCU_height,
-			     JXFORM_CODE transform)
-{
-  boolean result = TRUE; /* initialize TRUE */
-
-  switch (transform) {
-  case JXFORM_FLIP_H:
-  case JXFORM_ROT_270:
-    if (image_width % (JDIMENSION) MCU_width)
-      result = FALSE;
-    break;
-  case JXFORM_FLIP_V:
-  case JXFORM_ROT_90:
-    if (image_height % (JDIMENSION) MCU_height)
-      result = FALSE;
-    break;
-  case JXFORM_TRANSVERSE:
-  case JXFORM_ROT_180:
-    if (image_width % (JDIMENSION) MCU_width)
-      result = FALSE;
-    if (image_height % (JDIMENSION) MCU_height)
-      result = FALSE;
-    break;
-  default:
-    break;
-  }
-
-  return result;
-}
-
-#endif /* TRANSFORMS_SUPPORTED */
-
-
-/* Setup decompression object to save desired markers in memory.
- * This must be called before jpeg_read_header() to have the desired effect.
- */
-
-GLOBAL(void)
-jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option)
-{
-#ifdef SAVE_MARKERS_SUPPORTED
-  int m;
-
-  /* Save comments except under NONE option */
-  if (option != JCOPYOPT_NONE) {
-    jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF);
-  }
-  /* Save all types of APPn markers iff ALL option */
-  if (option == JCOPYOPT_ALL) {
-    for (m = 0; m < 16; m++)
-      jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF);
-  }
-#endif /* SAVE_MARKERS_SUPPORTED */
-}
-
-/* Copy markers saved in the given source object to the destination object.
- * This should be called just after jpeg_start_compress() or
- * jpeg_write_coefficients().
- * Note that those routines will have written the SOI, and also the
- * JFIF APP0 or Adobe APP14 markers if selected.
- */
-
-GLOBAL(void)
-jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-		       JCOPY_OPTION option)
-{
-  jpeg_saved_marker_ptr marker;
-
-  /* In the current implementation, we don't actually need to examine the
-   * option flag here; we just copy everything that got saved.
-   * But to avoid confusion, we do not output JFIF and Adobe APP14 markers
-   * if the encoder library already wrote one.
-   */
-  for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) {
-    if (dstinfo->write_JFIF_header &&
-	marker->marker == JPEG_APP0 &&
-	marker->data_length >= 5 &&
-	GETJOCTET(marker->data[0]) == 0x4A &&
-	GETJOCTET(marker->data[1]) == 0x46 &&
-	GETJOCTET(marker->data[2]) == 0x49 &&
-	GETJOCTET(marker->data[3]) == 0x46 &&
-	GETJOCTET(marker->data[4]) == 0)
-      continue;			/* reject duplicate JFIF */
-    if (dstinfo->write_Adobe_marker &&
-	marker->marker == JPEG_APP0+14 &&
-	marker->data_length >= 5 &&
-	GETJOCTET(marker->data[0]) == 0x41 &&
-	GETJOCTET(marker->data[1]) == 0x64 &&
-	GETJOCTET(marker->data[2]) == 0x6F &&
-	GETJOCTET(marker->data[3]) == 0x62 &&
-	GETJOCTET(marker->data[4]) == 0x65)
-      continue;			/* reject duplicate Adobe */
-#ifdef NEED_FAR_POINTERS
-    /* We could use jpeg_write_marker if the data weren't FAR... */
-    {
-      unsigned int i;
-      jpeg_write_m_header(dstinfo, marker->marker, marker->data_length);
-      for (i = 0; i < marker->data_length; i++)
-	jpeg_write_m_byte(dstinfo, marker->data[i]);
-    }
-#else
-    jpeg_write_marker(dstinfo, marker->marker,
-		      marker->data, marker->data_length);
-#endif
-  }
-}
diff --git a/extra/fbida/transupp.h b/extra/fbida/transupp.h
deleted file mode 100644
index 7c16c19c4..000000000
--- a/extra/fbida/transupp.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * transupp.h
- *
- * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for image transformation routines and
- * other utility code used by the jpegtran sample application.  These are
- * NOT part of the core JPEG library.  But we keep these routines separate
- * from jpegtran.c to ease the task of maintaining jpegtran-like programs
- * that have other user interfaces.
- *
- * NOTE: all the routines declared here have very specific requirements
- * about when they are to be executed during the reading and writing of the
- * source and destination files.  See the comments in transupp.c, or see
- * jpegtran.c for an example of correct usage.
- */
-
-/* If you happen not to want the image transform support, disable it here */
-#ifndef TRANSFORMS_SUPPORTED
-#define TRANSFORMS_SUPPORTED 1		/* 0 disables transform code */
-#endif
-
-/*
- * Although rotating and flipping data expressed as DCT coefficients is not
- * hard, there is an asymmetry in the JPEG format specification for images
- * whose dimensions aren't multiples of the iMCU size.  The right and bottom
- * image edges are padded out to the next iMCU boundary with junk data; but
- * no padding is possible at the top and left edges.  If we were to flip
- * the whole image including the pad data, then pad garbage would become
- * visible at the top and/or left, and real pixels would disappear into the
- * pad margins --- perhaps permanently, since encoders & decoders may not
- * bother to preserve DCT blocks that appear to be completely outside the
- * nominal image area.  So, we have to exclude any partial iMCUs from the
- * basic transformation.
- *
- * Transpose is the only transformation that can handle partial iMCUs at the
- * right and bottom edges completely cleanly.  flip_h can flip partial iMCUs
- * at the bottom, but leaves any partial iMCUs at the right edge untouched.
- * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched.
- * The other transforms are defined as combinations of these basic transforms
- * and process edge blocks in a way that preserves the equivalence.
- *
- * The "trim" option causes untransformable partial iMCUs to be dropped;
- * this is not strictly lossless, but it usually gives the best-looking
- * result for odd-size images.  Note that when this option is active,
- * the expected mathematical equivalences between the transforms may not hold.
- * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
- * followed by -rot 180 -trim trims both edges.)
- *
- * We also offer a lossless-crop option, which discards data outside a given
- * image region but losslessly preserves what is inside.  Like the rotate and
- * flip transforms, lossless crop is restricted by the JPEG format: the upper
- * left corner of the selected region must fall on an iMCU boundary.  If this
- * does not hold for the given crop parameters, we silently move the upper left
- * corner up and/or left to make it so, simultaneously increasing the region
- * dimensions to keep the lower right crop corner unchanged.  (Thus, the
- * output image covers at least the requested region, but may cover more.)
- *
- * We also provide a lossless-resize option, which is kind of a lossless-crop
- * operation in the DCT coefficient block domain - it discards higher-order
- * coefficients and losslessly preserves lower-order coefficients of a
- * sub-block.
- *
- * Rotate/flip transform, resize, and crop can be requested together in a
- * single invocation.  The crop is applied last --- that is, the crop region
- * is specified in terms of the destination image after transform/resize.
- *
- * We also offer a "force to grayscale" option, which simply discards the
- * chrominance channels of a YCbCr image.  This is lossless in the sense that
- * the luminance channel is preserved exactly.  It's not the same kind of
- * thing as the rotate/flip transformations, but it's convenient to handle it
- * as part of this package, mainly because the transformation routines have to
- * be aware of the option to know how many components to work on.
- */
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jtransform_parse_crop_spec	jTrParCrop
-#define jtransform_request_workspace	jTrRequest
-#define jtransform_adjust_parameters	jTrAdjust
-#define jtransform_execute_transform	jTrExec
-#define jtransform_perfect_transform	jTrPerfect
-#define jcopy_markers_setup		jCMrkSetup
-#define jcopy_markers_execute		jCMrkExec
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/*
- * Codes for supported types of image transformations.
- */
-
-typedef enum {
-	JXFORM_NONE,		/* no transformation */
-	JXFORM_FLIP_H,		/* horizontal flip */
-	JXFORM_FLIP_V,		/* vertical flip */
-	JXFORM_TRANSPOSE,	/* transpose across UL-to-LR axis */
-	JXFORM_TRANSVERSE,	/* transpose across UR-to-LL axis */
-	JXFORM_ROT_90,		/* 90-degree clockwise rotation */
-	JXFORM_ROT_180,		/* 180-degree rotation */
-	JXFORM_ROT_270		/* 270-degree clockwise (or 90 ccw) */
-} JXFORM_CODE;
-
-/*
- * Codes for crop parameters, which can individually be unspecified,
- * positive, or negative.  (Negative width or height makes no sense, though.)
- */
-
-typedef enum {
-	JCROP_UNSET,
-	JCROP_POS,
-	JCROP_NEG
-} JCROP_CODE;
-
-/*
- * Transform parameters struct.
- * NB: application must not change any elements of this struct after
- * calling jtransform_request_workspace.
- */
-
-typedef struct {
-  /* Options: set by caller */
-  JXFORM_CODE transform;	/* image transform operator */
-  boolean perfect;		/* if TRUE, fail if partial MCUs are requested */
-  boolean trim;			/* if TRUE, trim partial MCUs as needed */
-  boolean force_grayscale;	/* if TRUE, convert color image to grayscale */
-  boolean crop;			/* if TRUE, crop source image */
-
-  /* Crop parameters: application need not set these unless crop is TRUE.
-   * These can be filled in by jtransform_parse_crop_spec().
-   */
-  JDIMENSION crop_width;	/* Width of selected region */
-  JCROP_CODE crop_width_set;
-  JDIMENSION crop_height;	/* Height of selected region */
-  JCROP_CODE crop_height_set;
-  JDIMENSION crop_xoffset;	/* X offset of selected region */
-  JCROP_CODE crop_xoffset_set;	/* (negative measures from right edge) */
-  JDIMENSION crop_yoffset;	/* Y offset of selected region */
-  JCROP_CODE crop_yoffset_set;	/* (negative measures from bottom edge) */
-
-  /* Internal workspace: caller should not touch these */
-  int num_components;		/* # of components in workspace */
-  jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
-  JDIMENSION output_width;	/* cropped destination dimensions */
-  JDIMENSION output_height;
-  JDIMENSION x_crop_offset;	/* destination crop offsets measured in iMCUs */
-  JDIMENSION y_crop_offset;
-  int iMCU_sample_width;	/* destination iMCU size */
-  int iMCU_sample_height;
-} jpeg_transform_info;
-
-
-#if TRANSFORMS_SUPPORTED
-
-/* Parse a crop specification (written in X11 geometry style) */
-EXTERN(boolean) jtransform_parse_crop_spec
-	JPP((jpeg_transform_info *info, const char *spec));
-/* Request any required workspace */
-EXTERN(boolean) jtransform_request_workspace
-	JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
-/* Adjust output image parameters */
-EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters
-	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	     jvirt_barray_ptr *src_coef_arrays,
-	     jpeg_transform_info *info));
-/* Execute the actual transformation, if any */
-EXTERN(void) jtransform_execute_transform
-	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	     jvirt_barray_ptr *src_coef_arrays,
-	     jpeg_transform_info *info));
-/* Determine whether lossless transformation is perfectly
- * possible for a specified image and transformation.
- */
-EXTERN(boolean) jtransform_perfect_transform
-	JPP((JDIMENSION image_width, JDIMENSION image_height,
-	     int MCU_width, int MCU_height,
-	     JXFORM_CODE transform));
-
-/* jtransform_execute_transform used to be called
- * jtransform_execute_transformation, but some compilers complain about
- * routine names that long.  This macro is here to avoid breaking any
- * old source code that uses the original name...
- */
-#define jtransform_execute_transformation	jtransform_execute_transform
-
-#endif /* TRANSFORMS_SUPPORTED */
-
-
-/*
- * Support for copying optional markers from source to destination file.
- */
-
-typedef enum {
-	JCOPYOPT_NONE,		/* copy no optional markers */
-	JCOPYOPT_COMMENTS,	/* copy only comment (COM) markers */
-	JCOPYOPT_ALL		/* copy all optional markers */
-} JCOPY_OPTION;
-
-#define JCOPYOPT_DEFAULT  JCOPYOPT_COMMENTS	/* recommended default */
-
-/* Setup decompression object to save desired markers in memory */
-EXTERN(void) jcopy_markers_setup
-	JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option));
-/* Copy markers saved in the given source object to the destination object */
-EXTERN(void) jcopy_markers_execute
-	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	     JCOPY_OPTION option));
diff --git a/extra/fvwm-devel/PKGBUILD b/extra/fvwm-devel/PKGBUILD
deleted file mode 100644
index 42ea9293f..000000000
--- a/extra/fvwm-devel/PKGBUILD
+++ /dev/null
@@ -1,37 +0,0 @@
-# $Id: PKGBUILD 122676 2011-05-06 03:54:22Z eric $
-# Maintainer: Eric Bélanger <eric@archlinux.org>
-
-pkgname=fvwm-devel
-pkgver=2.7.0
-pkgrel=2
-pkgdesc="A multiple large virtual desktop window manager originally derived from twm"
-arch=('i686' 'x86_64')
-url="http://www.fvwm.org"
-license=('GPL' 'custom')
-depends=('imlib' 'fribidi' 'perl' 'libstroke' 'libxpm' 'librsvg' 'libxinerama' 'libxcursor')
-makedepends=('libxslt')
-conflicts=('fvwm')
-provides=("fvwm=${pkgver}")
-options=('!emptydirs')
-source=(ftp://ftp.fvwm.org/pub/fvwm/version-2/fvwm-${pkgver}.tar.bz2 fvwm-devel.desktop)
-md5sums=('c7dbb0c067f570e478005edb95dcccc3'
-         '3f5bcb246e035ff29aa5bf54487a3db4')
-sha1sums=('bc8f84902b0926df171d059eff75780a25c8a97a'
-          '17db773870637b410ceb4f68743dbd517bc5c599')
-
-build() {
-  cd "${srcdir}/fvwm-${pkgver}"
-  ./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib --with-stroke-library
-  make
-}
-
-package() {
-  cd "${srcdir}/fvwm-${pkgver}"
-  make DESTDIR="${pkgdir}" install
-
-  install -d "${pkgdir}/etc/fvwm"
-  install -D -m644 sample.fvwmrc/* "${pkgdir}/etc/fvwm"
-  rm -f "${pkgdir}"/etc/fvwm/Makefile*
-  install -D -m644 ../fvwm-devel.desktop "${pkgdir}/usr/share/xsessions/fvwm-devel.desktop"
-  install -D -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/COPYING"
-}
diff --git a/extra/fvwm-devel/fvwm-devel.desktop b/extra/fvwm-devel/fvwm-devel.desktop
deleted file mode 100644
index dac786fb8..000000000
--- a/extra/fvwm-devel/fvwm-devel.desktop
+++ /dev/null
@@ -1,6 +0,0 @@
-[Desktop Entry]
-Encoding=UTF-8
-Type=XSession
-Exec=/usr/bin/fvwm
-TryExec=/usr/bin/fvwm
-Name=fvwm-devel
diff --git a/extra/fvwm/fvwm2.desktop b/extra/fvwm/fvwm2.desktop
deleted file mode 100644
index 5df7750b1..000000000
--- a/extra/fvwm/fvwm2.desktop
+++ /dev/null
@@ -1,8 +0,0 @@
-[Desktop Entry]
-Encoding=UTF-8
-Name=FVWM2
-Comment=The fvwm2 window manager
-Exec=fvwm2
-# no icon yet, only the top three are currently used
-Icon=
-Type=Application
diff --git a/extra/icewm/ChangeLog b/extra/icewm/ChangeLog
deleted file mode 100644
index b3e46cb6f..000000000
--- a/extra/icewm/ChangeLog
+++ /dev/null
@@ -1,15 +0,0 @@
-2010-01-18  Eric Belanger  <eric@archlinux.org>
-
-	* icewm 1.2.37-3
-	* Rebuilt for libpng 1.4 and libjpeg 8
-
-2009-01-30  Eric Belanger  <eric@archlinux.org>
-
-	* icewm 1.2.37-1
-	* Upstream update
-
-2008-10-18  Eric Belanger  <eric@archlinux.org>
-
-	* icewm 1.2.36-1
-	* Upstream update
-	* Added ChangeLog
diff --git a/extra/icewm/icewm.desktop b/extra/icewm/icewm.desktop
deleted file mode 100644
index e5ff5dce6..000000000
--- a/extra/icewm/icewm.desktop
+++ /dev/null
@@ -1,6 +0,0 @@
-[Desktop Entry]
-Encoding=UTF-8
-Type=XSession
-Exec=/usr/bin/icewm-session
-TryExec=/usr/bin/icewm-session
-Name=icewm
diff --git a/extra/indent/indent-2.2.9-file.diff b/extra/indent/indent-2.2.9-file.diff
deleted file mode 100644
index 511995c0b..000000000
--- a/extra/indent/indent-2.2.9-file.diff
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -Naur indent-2.2.9.orig/src/indent.h indent-2.2.9/src/indent.h
---- indent-2.2.9.orig/src/indent.h	2002-11-10 22:02:48.000000000 +0100
-+++ indent-2.2.9/src/indent.h	2005-10-30 11:53:10.000000000 +0100
-@@ -96,8 +96,6 @@
- /* Size of the input program, not including the ' \n\0' we add at the end */
- extern unsigned long in_prog_size;
- 
--/* The output file. */
--extern FILE *output;
- 
- 
- 
diff --git a/extra/libindi/linking-pthread.patch b/extra/libindi/linking-pthread.patch
deleted file mode 100644
index c012707a2..000000000
--- a/extra/libindi/linking-pthread.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- trunk/libindi/CMakeLists.txt	2010/11/20 11:45:07	397
-+++ trunk/libindi/CMakeLists.txt	2010/12/01 08:36:20	412
-@@ -164,7 +164,7 @@
- ############# INDI Client Library ################

- ##################################################

- add_library(indiclient STATIC ${indibase_SRCS})

--target_link_libraries(indiclient indi)

-+target_link_libraries(indiclient indi pthread)

- install(TARGETS indiclient ARCHIVE DESTINATION lib${LIB_POSTFIX})

- 

- #####################################

diff --git a/extra/moc/curl-streams.diff b/extra/moc/curl-streams.diff
deleted file mode 100644
index 2dbc38d54..000000000
--- a/extra/moc/curl-streams.diff
+++ /dev/null
@@ -1,28 +0,0 @@
-diff -u moc-2.4.4/io_curl.c moc-2.4.4/io_curl.c
---- a/io_curl.c	2007-07-08 08:54:45.000000000 +0200
-+++ b/io_curl.c	2011-05-18 09:09:40.000000000 +0200
-@@ -338,6 +338,8 @@
- 			fd_set read_fds, write_fds, exc_fds;
- 			int max_fd;
- 			int ret;
-+         long milliseconds;
-+         struct timeval timeout;
- 
- 			logit ("Doing select()...");
- 
-@@ -356,8 +358,14 @@
- 			if (s->curl.wake_up_pipe[0] > max_fd)
- 				max_fd = s->curl.wake_up_pipe[0];
- 
-+         curl_multi_timeout(s->curl.multi_handle, &milliseconds);
-+         if(milliseconds <= 0)
-+           milliseconds = 1000; /* just a cautionary default */
-+         timeout.tv_sec = milliseconds / 1000;
-+         timeout.tv_usec = (milliseconds % 1000) * 1000;
-+
- 			ret = select (max_fd + 1, &read_fds, &write_fds,
--					&exc_fds, NULL);
-+					&exc_fds, &timeout);
- 
- 			if (ret < 0 && errno == EINTR) {
- 				logit ("Interrupted");
diff --git a/extra/mousepad/PKGBUILD b/extra/mousepad/PKGBUILD
deleted file mode 100644
index 9b3e0a599..000000000
--- a/extra/mousepad/PKGBUILD
+++ /dev/null
@@ -1,28 +0,0 @@
-# $Id: PKGBUILD 58320 2009-11-07 00:36:34Z allan $
-# Maintainer: tobias [tobias at archlinux.org]
-
-pkgname=mousepad
-pkgver=0.2.16
-pkgrel=2
-pkgdesc="Simple Text Editor for Xfce4 (based on Gedit)" 
-arch=(i686 x86_64)
-groups=('xfce4') 
-license="GPL2" 
-depends=('libxfcegui4>=4.6.0' 'desktop-file-utils')
-makedepends=('pkgconfig' 'intltool' 'perl')
-options=('!libtool')
-url=('http://www.xfce.org/~benny/apps.html')
-install=${pkgname}.install
-source=(http://www.xfce.org/archive/xfce-4.6.0/src/${pkgname}-${pkgver}.tar.bz2
-        resensitize-find-button.patch)
-md5sums=('d98854edb76d823ac20b266fdf5a64a1'
-         '1fbc153fbd47ebb95d93f7084dea93e0')
-
-build() { 
-  cd ${srcdir}/${pkgname}-${pkgver}
-  patch -Np1 -i $srcdir/resensitize-find-button.patch
-  ./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib/xfce4 \
-    --localstatedir=/var --disable-static
-  make || return 1
-  make DESTDIR=${pkgdir} install || return 1
-}
diff --git a/extra/mousepad/mousepad.install b/extra/mousepad/mousepad.install
deleted file mode 100644
index e7ca93e53..000000000
--- a/extra/mousepad/mousepad.install
+++ /dev/null
@@ -1,16 +0,0 @@
-post_install() {
-  update-desktop-database -q
-}
-
-post_upgrade() {
-  post_install $1
-}
-
-post_remove() {
-  update-desktop-database -q
-}
-
-op=$1
-shift
-
-$op $*
diff --git a/extra/mousepad/resensitize-find-button.patch b/extra/mousepad/resensitize-find-button.patch
deleted file mode 100644
index db79adc4d..000000000
--- a/extra/mousepad/resensitize-find-button.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- mousepad-0.2.16.orig/src/search.c
-+++ mousepad-0.2.16/src/search.c
-@@ -210,8 +210,11 @@
- 		G_CALLBACK(toggle_sensitivity), NULL);
- 	 g_signal_connect(G_OBJECT(entry_find), "delete-text",
- 		G_CALLBACK(toggle_sensitivity), NULL);
--	 if (sd->search.string_find) 
-+	 if (sd->search.string_find) {
- 		 gtk_entry_set_text(GTK_ENTRY(entry_find), sd->search.string_find);
-+		 gtk_dialog_set_response_sensitive(GTK_DIALOG(dialog),
-+			GTK_RESPONSE_OK, TRUE);
-+	 }
- 
- 	gtk_dialog_set_default_response(GTK_DIALOG(dialog), GTK_RESPONSE_OK);
- 	gtk_entry_set_activates_default(GTK_ENTRY(entry_find), TRUE);
-@@ -275,8 +278,11 @@
- 		G_CALLBACK(toggle_sensitivity), NULL);
- 	 g_signal_connect(G_OBJECT(entry_find), "delete-text",
- 		G_CALLBACK(toggle_sensitivity), NULL);
--	 if (sd->search.string_find) 
-+	 if (sd->search.string_find) {
- 		 gtk_entry_set_text(GTK_ENTRY(entry_find), sd->search.string_find);
-+		 gtk_dialog_set_response_sensitive(GTK_DIALOG(dialog),
-+			GTK_RESPONSE_OK, TRUE);
-+	}
- 	label_replace = gtk_label_new_with_mnemonic(_("Re_place with: "));
- 	 gtk_misc_set_alignment(GTK_MISC(label_replace), 0, 0.5);
- 	 gtk_table_attach_defaults(GTK_TABLE(table), label_replace, 0, 1, 1, 2);
diff --git a/extra/python2/CVE-2011-1521.patch b/extra/python2/CVE-2011-1521.patch
deleted file mode 100644
index d68ec3323..000000000
--- a/extra/python2/CVE-2011-1521.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-diff -Naur Python-2.7.1.ori/Lib/test/test_urllib2.py Python-2.7.1/Lib/test/test_urllib2.py
---- Python-2.7.1.ori/Lib/test/test_urllib2.py	2010-11-21 21:04:33.000000000 -0800
-+++ Python-2.7.1/Lib/test/test_urllib2.py	2011-04-15 05:02:13.278853672 -0700
-@@ -969,6 +969,27 @@
-             self.assertEqual(count,
-                              urllib2.HTTPRedirectHandler.max_redirections)
- 
-+    def test_invalid_redirect(self):
-+        from_url = "http://example.com/a.html"
-+        valid_schemes = ['http', 'https', 'ftp']
-+        invalid_schemes = ['file', 'imap', 'ldap']
-+        schemeless_url = "example.com/b.html"
-+        h = urllib2.HTTPRedirectHandler()
-+        o = h.parent = MockOpener()
-+        req = Request(from_url)
-+
-+        for scheme in invalid_schemes:
-+            invalid_url = scheme + '://' + schemeless_url
-+            self.assertRaises(urllib2.HTTPError, h.http_error_302,
-+                              req, MockFile(), 302, "Security Loophole",
-+                              MockHeaders({"location": invalid_url}))
-+
-+        for scheme in valid_schemes:
-+            valid_url = scheme + '://' + schemeless_url
-+            h.http_error_302(req, MockFile(), 302, "That's fine",
-+                MockHeaders({"location": valid_url}))
-+            self.assertEqual(o.req.get_full_url(), valid_url)
-+
-     def test_cookie_redirect(self):
-         # cookies shouldn't leak into redirected requests
-         from cookielib import CookieJar
-diff -Naur Python-2.7.1.ori/Lib/test/test_urllib.py Python-2.7.1/Lib/test/test_urllib.py
---- Python-2.7.1.ori/Lib/test/test_urllib.py	2010-11-21 05:34:58.000000000 -0800
-+++ Python-2.7.1/Lib/test/test_urllib.py	2011-04-15 05:02:13.278853672 -0700
-@@ -161,6 +161,20 @@
-         finally:
-             self.unfakehttp()
- 
-+    def test_invalid_redirect(self):
-+        # urlopen() should raise IOError for many error codes.
-+        self.fakehttp("""HTTP/1.1 302 Found
-+Date: Wed, 02 Jan 2008 03:03:54 GMT
-+Server: Apache/1.3.33 (Debian GNU/Linux) mod_ssl/2.8.22 OpenSSL/0.9.7e
-+Location: file:README
-+Connection: close
-+Content-Type: text/html; charset=iso-8859-1
-+""")
-+        try:
-+            self.assertRaises(IOError, urllib.urlopen, "http://python.org/")
-+        finally:
-+            self.unfakehttp()
-+
-     def test_empty_socket(self):
-         # urlopen() raises IOError if the underlying socket does not send any
-         # data. (#1680230)
-diff -Naur Python-2.7.1.ori/Lib/urllib2.py Python-2.7.1/Lib/urllib2.py
---- Python-2.7.1.ori/Lib/urllib2.py	2010-11-20 03:24:08.000000000 -0800
-+++ Python-2.7.1/Lib/urllib2.py	2011-04-15 05:02:13.278853672 -0700
-@@ -579,6 +579,17 @@
- 
-         newurl = urlparse.urljoin(req.get_full_url(), newurl)
- 
-+        # For security reasons we do not allow redirects to protocols
-+        # other than HTTP, HTTPS or FTP.
-+        newurl_lower = newurl.lower()
-+        if not (newurl_lower.startswith('http://') or
-+                newurl_lower.startswith('https://') or
-+                newurl_lower.startswith('ftp://')):
-+            raise HTTPError(newurl, code,
-+                            msg + " - Redirection to url '%s' is not allowed" %
-+                            newurl,
-+                            headers, fp)
-+
-         # XXX Probably want to forget about the state of the current
-         # request, although that might interact poorly with other
-         # handlers that also use handler-specific request attributes
-diff -Naur Python-2.7.1.ori/Lib/urllib.py Python-2.7.1/Lib/urllib.py
---- Python-2.7.1.ori/Lib/urllib.py	2010-11-21 21:04:33.000000000 -0800
-+++ Python-2.7.1/Lib/urllib.py	2011-04-15 05:02:13.278853672 -0700
-@@ -644,6 +644,18 @@
-         fp.close()
-         # In case the server sent a relative URL, join with original:
-         newurl = basejoin(self.type + ":" + url, newurl)
-+
-+        # For security reasons we do not allow redirects to protocols
-+        # other than HTTP, HTTPS or FTP.
-+        newurl_lower = newurl.lower()
-+        if not (newurl_lower.startswith('http://') or
-+                newurl_lower.startswith('https://') or
-+                newurl_lower.startswith('ftp://')):
-+            raise IOError('redirect error', errcode,
-+                          errmsg + " - Redirection to url '%s' is not allowed" %
-+                          newurl,
-+                          headers)
-+
-         return self.open(newurl)
- 
-     def http_error_301(self, url, fp, errcode, errmsg, headers, data=None):
diff --git a/extra/python2/python-2.7.1-fix-decimal-in-turkish-locale.patch b/extra/python2/python-2.7.1-fix-decimal-in-turkish-locale.patch
deleted file mode 100644
index 57f527f40..000000000
--- a/extra/python2/python-2.7.1-fix-decimal-in-turkish-locale.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-diff -up Python-2.7.1/Lib/decimal.py.fix-decimal-in-turkish-locale Python-2.7.1/Lib/decimal.py
---- Python-2.7.1/Lib/decimal.py.fix-decimal-in-turkish-locale	2010-07-08 17:22:54.000000000 -0400
-+++ Python-2.7.1/Lib/decimal.py	2011-04-12 11:30:40.850350842 -0400
-@@ -1720,8 +1720,6 @@ class Decimal(object):
-         # here self was representable to begin with; return unchanged
-         return Decimal(self)
-
--    _pick_rounding_function = {}
--
-     # for each of the rounding functions below:
-     #   self is a finite, nonzero Decimal
-     #   prec is an integer satisfying 0 <= prec < len(self._int)
-@@ -1788,6 +1786,17 @@ class Decimal(object):
-         else:
-             return -self._round_down(prec)
-
-+    _pick_rounding_function = dict(
-+        ROUND_DOWN = '_round_down',
-+        ROUND_UP = '_round_up',
-+        ROUND_HALF_UP = '_round_half_up',
-+        ROUND_HALF_DOWN = '_round_half_down',
-+        ROUND_HALF_EVEN = '_round_half_even',
-+        ROUND_CEILING = '_round_ceiling',
-+        ROUND_FLOOR = '_round_floor',
-+        ROUND_05UP = '_round_05up',
-+    )
-+
-     def fma(self, other, third, context=None):
-         """Fused multiply-add.
-
-@@ -3705,18 +3714,6 @@ _numbers.Number.register(Decimal)
-
- ##### Context class #######################################################
-
--
--# get rounding method function:
--rounding_functions = [name for name in Decimal.__dict__.keys()
--                                    if name.startswith('_round_')]
--for name in rounding_functions:
--    # name is like _round_half_even, goes to the global ROUND_HALF_EVEN value.
--    globalname = name[1:].upper()
--    val = globals()[globalname]
--    Decimal._pick_rounding_function[val] = name
--
--del name, val, globalname, rounding_functions
--
- class _ContextManager(object):
-     """Context manager class to support localcontext().
diff --git a/extra/rcs/rcs-5.7.patch b/extra/rcs/rcs-5.7.patch
deleted file mode 100644
index 0f062b357..000000000
--- a/extra/rcs/rcs-5.7.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-diff -Naur rcs-5.7-orig/src/conf.heg rcs-5.7/src/conf.heg
---- rcs-5.7-orig/src/conf.heg	1995-06-02 11:19:00.000000000 -0700
-+++ rcs-5.7/src/conf.heg	2004-11-29 12:41:37.000000000 -0800
-@@ -210,10 +210,10 @@
- /* Do struct stat s and t describe the same file?  Answer d if unknown.  */
- #define same_file(s,t,d) ((s).st_ino==(t).st_ino && (s).st_dev==(t).st_dev)
- #define has_utimbuf 1 /* Does struct utimbuf work?  */
--#define CO "/usr/local/bin/co" /* name of 'co' program */
-+#define CO "/usr/bin/co" /* name of 'co' program */
- #define COMPAT2 0 /* Are version 2 files supported?  */
--#define DIFF "/usr/local/bin/diff" /* name of 'diff' program */
--#define DIFF3 "/usr/local/bin/diff3" /* name of 'diff3' program */
-+#define DIFF "/usr/bin/diff" /* name of 'diff' program */
-+#define DIFF3 "/usr/bin/diff3" /* name of 'diff3' program */
- #define DIFF3_BIN 1 /* Is diff3 user-visible (not the /usr/lib auxiliary)?  */
- #define DIFFFLAGS "-an" /* Make diff output suitable for RCS.  */
- #define DIFF_L 1 /* Does diff -L work?  */
-@@ -221,7 +221,7 @@
- #define DIFF_FAILURE 1 /* DIFF status if differences are found */
- #define DIFF_TROUBLE 2 /* DIFF status if trouble */
- #define ED "/bin/ed" /* name of 'ed' program (used only if !DIFF3_BIN) */
--#define MERGE "/usr/local/bin/merge" /* name of 'merge' program */
-+#define MERGE "/usr/bin/merge" /* name of 'merge' program */
- #define TMPDIR "/tmp" /* default directory for temporary files */
- #define SLASH '/' /* principal filename separator */
- #define SLASHes '/' /* `case SLASHes:' labels all filename separators */
-diff -Naur rcs-5.7-orig/src/conf.sh rcs-5.7/src/conf.sh
---- rcs-5.7-orig/src/conf.sh	1995-06-15 23:19:24.000000000 -0700
-+++ rcs-5.7/src/conf.sh	2004-11-29 12:42:28.000000000 -0800
-@@ -32,7 +32,7 @@
- # and can be inspected for clues otherwise.
- 
- # The Makefile overrides the following defaults.
--: ${RCSPREFIX=/usr/local/bin/}
-+: ${RCSPREFIX=/usr/bin/}
- : ${ALL_CFLAGS=-Dhas_conf_h}
- : ${CC=cc}
- : ${COMPAT2=0}
-@@ -42,8 +42,8 @@
- : ${DIFFFLAGS=-an}
- : ${DIFF_L=1}
- : ${DIFF_SUCCESS=0} ${DIFF_FAILURE=1} ${DIFF_TROUBLE=2}
--: ${ED=/bin/ed}
--: ${SENDMAIL='"/usr/lib/sendmail"'}
-+: ${ED=/usr/bin/ed}
-+: ${SENDMAIL='"/usr/sbin/sendmail"'}
- # : ${LDFLAGS=} ${LIBS=} tickles old shell bug
- 
- C="$CC $ALL_CFLAGS"
-@@ -73,17 +73,6 @@
- 	ech='echo -n' dots='... '
- esac
- 
--$ech >&3 "$0: testing permissions $dots"
--rm -f a.d &&
--date >a.d &&
--chmod 0 a.d &&
--{ test -w a.d || cp /dev/null a.d 2>/dev/null; } && {
--	echo >&3 "$n$0: This command should not be run with superuser permissions."
--	exit 1
--}
--echo >&3 OK
--rm -f a.d || exit
--
- $ech >&3 "$0: testing compiler for plausibility $dots"
- echo 'main() { return 0; }' >a.c
- rm -f a.exe a.out || exit
diff --git a/extra/xfprint/PKGBUILD b/extra/xfprint/PKGBUILD
deleted file mode 100644
index 1d622e190..000000000
--- a/extra/xfprint/PKGBUILD
+++ /dev/null
@@ -1,35 +0,0 @@
-# $Id: PKGBUILD 122851 2011-05-06 14:01:10Z stephane $
-# Maintainer: Tobias Kieslich <tobias funnychar archlinux.org>
-
-pkgname=xfprint
-pkgver=4.6.1
-pkgrel=5
-pkgdesc="A print dialog and a printer manager for Xfce"
-arch=(i686 x86_64)
-license=('GPL2')
-url="http://www.xfce.org/"
-groups=('xfce4')
-depends=("libxfcegui4>=$pkgver" "xfconf>=$pkgver" 'libcups>=1.3.10' 'a2ps' 'krb5'
-         'gnutls>=2.6.5' 'hicolor-icon-theme')
-makedepends=('pkgconfig' 'intltool')
-options=('!libtool')
-install=${pkgname}.install
-source=(http://archive.xfce.org/xfce/${pkgver}/src/${pkgname}-${pkgver}.tar.bz2
-        xfprint-manager-fix.diff)
-md5sums=('d92fca97a42816085080baf07a99a62e'
-         '69b3619a285e94d602a1d0ac08f4ca06')
-
-build() {
-  cd ${srcdir}/${pkgname}-${pkgver}
-  # fix xfprint-manager not showing cups printers
-  # see http://bugs.archlinux.org/task/19965, http://bugs.gentoo.org/278047, http://bugzilla.xfce.org/show_bug.cgi?id=6089
-  patch -Np0 -i ${srcdir}/xfprint-manager-fix.diff
-  ./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib \
-    --localstatedir=/var --disable-static
-  make
-}
-
-package() {
-  cd ${srcdir}/${pkgname}-${pkgver}
-  make DESTDIR=${pkgdir} install
-}
diff --git a/extra/xfprint/xfprint-manager-fix.diff b/extra/xfprint/xfprint-manager-fix.diff
deleted file mode 100644
index 1bf0725f8..000000000
--- a/extra/xfprint/xfprint-manager-fix.diff
+++ /dev/null
@@ -1,29 +0,0 @@
---- xfprint-manager/main.c	2009-02-24 21:34:16.000000000 +0000
-+++ xfprint-manager/main.c.new	2010-07-15 21:30:51.098745852 +0000
-@@ -41,6 +41,7 @@
- #include <libxfprint/printer-list-window.h>
- 
- #define CHANNEL         "xfprint"
-+#define PROP_PRINTING_SYSTEM  "/printing-system"
- 
- extern void mainwin_setup (void);
- 
-@@ -66,15 +67,15 @@
-   channel = xfconf_channel_new (CHANNEL);
-   if (channel) {
- 
--    if (xfconf_channel_has_property (channel, "/XfPrint/system")) {
--      const gchar *system_name = xfconf_channel_get_string (channel, "/XfPrint/system", "none");
-+    if (xfconf_channel_has_property (channel, PROP_PRINTING_SYSTEM)) {
-+      const gchar *system_name = xfconf_channel_get_string (channel, PROP_PRINTING_SYSTEM, "none");
-       if (g_ascii_strcasecmp (system_name, "none") != 0) {
-         ps = printing_system_new (system_name);
-         if (ps == NULL);
-           g_warning ("Unable to load printing system module %s", system_name);
-       }
-     } else {
--      g_warning ("%s: XfPrint/system is not set", PACKAGE);
-+      g_warning ("%s: XfPrint/printing-system is not set", PACKAGE);
-     }
-   }
- 
diff --git a/extra/xfprint/xfprint.install b/extra/xfprint/xfprint.install
deleted file mode 100644
index 21b79d2d4..000000000
--- a/extra/xfprint/xfprint.install
+++ /dev/null
@@ -1,11 +0,0 @@
-post_install() {
-  gtk-update-icon-cache -q -t -f usr/share/icons/hicolor
-}
-
-post_upgrade() {
-  post_install $1
-}
-
-post_remove() {
-  gtk-update-icon-cache -q -t -f usr/share/icons/hicolor
-}