Fri May 4 20:00:31 UTC 2012

5 files changed, 0 insertions, 618 deletions

diff --git a/testing/syslinux/PKGBUILD b/testing/syslinux/PKGBUILD
deleted file mode 100644
index dcf40530c..000000000
--- a/testing/syslinux/PKGBUILD
+++ /dev/null
@@ -1,51 +0,0 @@
-# $Id: PKGBUILD 152449 2012-03-07 09:21:06Z tpowa $
-# Maintainer: Thomas Bächler <thomas@archlinux.org>
-# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
-
-pkgname=syslinux
-pkgver=4.05
-pkgrel=4
-arch=('i686' 'x86_64')
-pkgdesc="Collection of boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE"
-url="http://syslinux.zytor.com/"
-license=('GPL2')
-depends=('perl' 'glibc')
-optdepends=('perl-passwd-md5:  For md5pass'
-            'perl-digest-sha1: For sha1pass'
-            'mtools:           For mkdiskimage and syslinux support'
-           )
-makedepends=('nasm')
-backup=('boot/syslinux/syslinux.cfg')
-install=syslinux.install
-source=(http://www.kernel.org/pub/linux/utils/boot/syslinux/$pkgname-${pkgver}.tar.bz2
-        syslinux-dont-build-dos-windows-targets.patch
-        syslinux.cfg
-        syslinux-install_update)
-md5sums=('82299242418385da1274c9479a778cb2'
-         '1528c376e43f0eaccaa80d8ad1bc13b4'
-         '832595501944fbcabcdc1207f4724fe7'
-         '680750f73dc2e587ac567d057d485813')
-
-build() {
-  # Do not try to build syslinux with our default LDFLAGS, it will fail
-  unset LDFLAGS
-  cd "$srcdir"/$pkgname-${pkgver}
-  # Do not try to build the Windows or DOS installers
-  patch -p1 -i "$srcdir"/syslinux-dont-build-dos-windows-targets.patch
-  # Fix FHS manpage path
-  sed 's|/usr/man|/usr/share/man|g' -i mk/syslinux.mk
-  make
-}
-
-package() {
-  cd "$srcdir"/$pkgname-${pkgver}
-  make INSTALLROOT="$pkgdir" AUXDIR=/usr/lib/syslinux install
-
-  # Install the default configuration
-  install -D -m644 "$srcdir"/syslinux.cfg "$pkgdir"/boot/syslinux/syslinux.cfg
-  # Install the installation and update script
-  # This script is maintained at git://gist.github.com/772138.git
-  install -D -m755 "$srcdir"/syslinux-install_update "$pkgdir"/usr/sbin/syslinux-install_update
-  # move extlinux binary to /usr/sbin
-  mv "$pkgdir"/sbin/extlinux "$pkgdir"/usr/sbin/extlinux
-}
diff --git a/testing/syslinux/syslinux-dont-build-dos-windows-targets.patch b/testing/syslinux/syslinux-dont-build-dos-windows-targets.patch
deleted file mode 100644
index 2b86ab828..000000000
--- a/testing/syslinux/syslinux-dont-build-dos-windows-targets.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -Nur syslinux-4.02.orig//Makefile syslinux-4.02//Makefile
---- syslinux-4.02.orig//Makefile	2010-07-21 21:33:13.000000000 +0200
-+++ syslinux-4.02//Makefile	2010-07-22 11:14:03.325522937 +0200
-@@ -54,7 +54,7 @@
- # files that depend only on the B phase, but may have to be regenerated
- # for "make installer".
- BSUBDIRS = codepage com32 lzo core memdisk modules mbr memdump gpxe sample \
--	   diag libinstaller dos win32 win64 dosutil
-+	   libinstaller
- ITARGET  =
- IOBJECTS = $(ITARGET) \
- 	utils/gethostip utils/isohybrid utils/mkdiskimage \
diff --git a/testing/syslinux/syslinux-install_update b/testing/syslinux/syslinux-install_update
deleted file mode 100644
index cd1baa572..000000000
--- a/testing/syslinux/syslinux-install_update
+++ /dev/null
@@ -1,463 +0,0 @@
-#!/bin/bash
-#
-# Sylinux Installer / Updater Scripts
-# Copyright (C) 2011  Matthew Gyurgyik <pyther@pyther.net>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-#
-#-----------------
-# Exit Codes:
-#   1 - get_boot_device or other function failed
-#   2 - install/update failed
-#   3 - set_active failed
-#   4 - install_mbr failed
-#
-shopt -s nullglob
-
-libpath="/usr/lib/syslinux"
-bootpath="/boot/syslinux"
-extlinux="/usr/sbin/extlinux"
-
-autoupdate_file=/boot/syslinux/SYSLINUX_AUTOUPDATE
-com32_files=(menu.c32 vesamenu.c32 chain.c32 hdt.c32 reboot.c32 poweroff.com)
-pciids_file=/usr/share/hwdata/pci.ids
-
-## Helper functions ##
-# Taken from libui-sh
-# $1 needle
-# $2 set (array) haystack
-check_is_in() {
-    local needle="$1" element
-    shift
-    for element; do
-        [[ $element = $needle ]] && return 0
-    done
-    return 1
-}
-
-# return true when blockdevice is an md raid, otherwise return a unset value
-# get all devices that are part of raid device $1
-device_is_raid() {
-    [[ $1 && -f /proc/mdstat ]] || return 1
-    local devmajor=$(stat -c %t "$1")
-    (( devmajor == 9 ))
-}
-
-mdraid_all_slaves() {
-    local slave slaves
-    for slave in /sys/class/block/${1##*/}/slaves/*; do
-        source "$slave/uevent"
-        slaves="$slaves/dev/$DEVNAME "
-        unset DEVNAME
-    done
-    echo $slaves
-}
-
-# Check /sys/block to see if device is partitioned
-# If we have a partitioned block device (sda1) /sys/block/sda1/dev will not exist
-# However, if we have an unpartitioned block device (sda) /sys/block/sda/dev will exist
-dev_is_part() {
-    # $1 - blockdevice
-    local dev=$1
-
-    # If block device uevent file should be found
-    # If a partition is passed in path shouldn't exist
-    if [[ $dev = *cciss* ]]; then
-        [[ -f /sys/block/cciss\!${dev##*/}/dev ]] && return 1
-    elif [[ $dev = *ida* ]]; then
-        [[ -f /sys/block/ida\!${dev##*/}/dev ]] && return 1
-    else
-        [[ -f /sys/block/${dev##*/}/dev ]] && return 1
-    fi
-
-    return 0
-}
-
-# If EFI PART is present in the first 8 bytes then it must be a GPT disk
-device_is_gpt() {
-    local partsig=$(dd if="$1" skip=64 bs=8 count=1 2>/dev/null)
-    [[ $partsig = "EFI PART" ]]
-}
-
-clear_gpt_attr2() {
-    # $1 - Block Device, no partitions
-    local disk=$1
-
-    # Special Exception for cciss controllers
-    if [[ $disk = *cciss* ]]; then
-        for part in /dev/cciss/${disk##*/}*p*; do
-            local partnum="${part##*[[:alpha:]]}"
-            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
-        done
-    # Smart 2 Controllers
-    elif [[ $disk = *ida* ]]; then
-        for part in /dev/ida/${disk##*/}*p*; do
-            local partnum="${part##*[[:alpha:]]}"
-            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
-        done
-    else
-        for part in  /sys/block/${disk##*/}/${disk##*/}*; do
-            local partnum="${part##*[[:alpha:]]}"
-            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
-        done
-    fi
-    return 0
-}
-
-usage() {
-cat << EOF
-usage: $0 options
-
-This script will install or upgrade Syslinux
-
-OPTIONS:
-  -h    Show this message
-  -i    Install Syslinux
-  -u    Update Syslinux
-  -a    Set Boot flag on boot partiton
-  -m    Install Syslinux MBR
-  -s    Updates Syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
-
- Arguments Required:
-  -c    Chroot install (ex: -c /mnt)
-
-Example Usage: syslinux-install_update.sh -i -a -m (install, set boot flag, install mbr)
-               syslinux-install_update.sh -u (update)
-EOF
-}
-
-# Trys to find the partition that /boot resides on
-# This will either be on /boot or / (root)
-getBoot() {
-    if [[ ! -d "$bootpath" ]]; then
-        echo "Could not find $bootpath"
-        echo "Is boot mounted? Is Syslinux installed?"
-        exit 1
-    fi
-
-    syslinux_fs=(ext2 ext3 ext4 btrfs vfat)
-
-    # Use DATA from findmnt see rc.sysint for more info
-    if [[ -f /proc/self/mountinfo ]]; then
-        read rootdev rootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/")
-        read bootdev bootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/boot")
-    else
-        echo "Could not find /proc/self/mountinfo"
-        echo "Are you running a kernel greater than 2.6.24?"
-        exit 1
-    fi
-
-    if [[ $bootfs ]]; then
-        if ! check_is_in "$bootfs" "${syslinux_fs[@]}"; then
-            echo "/boot file system is not supported by Syslinux"
-            exit 1
-        fi
-        boot="boot"
-        bootpart="$bootdev"
-    elif [[ $rootfs ]]; then
-        if ! check_is_in "$rootfs" "${syslinux_fs[@]}"; then
-            echo "/ (root) file system is not supported by Syslinux"
-            exit 1
-        fi
-        boot="root"
-        bootpart="$rootdev"
-    else
-        echo "Could not find filesystem on / (root) or /boot."
-        exit 1
-    fi
-}
-
-# We store the partition table type either gpt or mbr in var ptb
-# In rare cases a user could have one raid disk using mbr and another using gpt
-# In such cases we accept that the output may be incomplete
-
-# Calls get_ptb() for $bootpart or for all device in RAID
-declare -A bootdevs
-get_boot_devices() {
-    if device_is_raid "$bootpart"; then
-        slaves=$(mdraid_all_slaves "$bootpart")
-
-        for slave in ${slaves[@]}; do
-            local disk="${slave%%[[:digit:]]*}"
-            device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
-            bootdevs[$slave]="$ptb"
-        done
-    else
-        local disk="${bootpart%%[[:digit:]]*}"
-        device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
-        bootdevs[$bootpart]="$ptb"
-    fi
-}
-
-# Function Assumes the boot partition should be marked as active
-# All other partitions should not have the boot flag set
-set_active() {
-    # If any bootdev is a block device without partitions bail
-    # we want to set the boot flag on partitioned disk
-    for dev in "${!bootdevs[@]}"; do
-        dev_is_part $dev || { echo "$dev - is a block device. Aborting set_active!"; return 1; }
-    done
-
-    # Clear BIOS Bootable Legacy Attribute for GPT drives
-    # In rare cases where a RAID device has slaves on the same block device
-    # Attribute 2 will be cleared for each partition multiple times
-    for dev in "${!bootdevs[@]}"; do
-        local ptb="${bootdevs[$dev]}"
-        if [[ "$ptb" = GPT ]]; then
-            local disk="${dev%%[[:digit:]]*}" #ex: /dev/sda
-            clear_gpt_attr2 "$disk"
-        fi
-    done
-
-    # Set the boot flag on bootdevs (generated from get_boot_devices)
-    for part in "${!bootdevs[@]}"; do
-        local ptb="${bootdevs[$part]}"
-        local partnum="${part##*[[:alpha:]]}"
-        case "$part" in
-            *[[:digit:]]p[[:digit:]]*)
-                local disk="${part%%p$partnum}" # get everything before p1
-                ;;
-            *)
-                local disk="${part%%[[:digit:]]*}"
-                ;;
-        esac
-
-        if [[ "$ptb" = MBR ]]; then
-            if sfdisk "$disk" -A "$partnum" &>/dev/null; then
-                echo "Boot Flag Set - $part"
-            else
-                echo "FAILED to Set the boot flag on $part"
-                exit 3
-            fi
-        elif [[ "$ptb" = GPT ]]; then
-            if sgdisk "$disk" --attributes="$partnum":set:2 &>/dev/null; then
-                echo "Attribute Legacy Bios Bootable Set - $part"
-            else
-                echo "FAILED to set attribute Legacy BIOS Bootable on $part"
-                exit 3
-            fi
-        fi
-    done
-    return 0
-}
-
-install_mbr() {
-    # If any bootdev is a block device without partitions bail
-    # we want to install the mbr to a partitioned disk
-    for dev in "${!bootdevs[@]}"; do
-        dev_is_part "$dev" || { echo "$dev - is a block device. Aborting MBR install"; return 1; }
-    done
-
-    for part in "${!bootdevs[@]}"; do
-        local partnum="${part##*[[:alpha:]]}"
-        case "$part" in
-            *[[:digit:]]p[[:digit:]]*)
-                local disk="${part%%p$partnum}" # get everything before p1
-                ;;
-            *)
-                local disk="${part%%[[:digit:]]*}"
-                ;;
-        esac
-        local ptb="${bootdevs[$part]}"
-
-        # We want to install to the root of the block device
-        # If the device is a partition - ABORT!
-        dev_is_part "$disk" && \
-        { echo "ABORT! MBR installation to partition ($disk)!"; exit 4;}
-
-        if [[ "$ptb" = MBR ]]; then
-            mbrfile="$libpath/mbr.bin"
-        elif [[ "$ptb" = GPT ]]; then
-            mbrfile="$libpath/gptmbr.bin"
-        fi
-
-        if dd bs=440 count=1 conv=notrunc if="$mbrfile" of="$disk" &> /dev/null; then
-            echo "Installed MBR ($mbrfile) to $disk"
-        else
-            echo "Error Installing MBR ($mbrfile) to $disk"
-            exit 4
-        fi
-    done
-    return 0
-}
-
-_install() {
-    # Copy files to /boot
-    for file in "${com32_files[@]}"; do
-        # Symlink files even if links exist
-        if [[ "$boot" = root ]]; then
-            ln -s "${libpath#$CHROOT}/$file" "$bootpath/$file" &> /dev/null
-        elif [[ "$boot" = boot ]]; then
-            cp "$libpath/$file" "$bootpath/$file"
-        fi
-    done
-
-    # Copy / Symlink pci.ids if we copy the com32 module and if pci.ids exists in the FS
-    if check_is_in "hdt.c32" "${com32_files[@]}" && [[ -f $pciids_file ]]; then 
-        if [[ "$boot" = root ]]; then
-            ln -s "$pciids_file" "$bootpath/pci.ids" &> /dev/null
-        elif [[ "$boot" = boot ]]; then
-            cp "$pciids_file" "$bootpath/pci.ids" &> /dev/null
-        fi
-    fi
-
-    if device_is_raid "$bootpart"; then
-        echo "Detected RAID on /boot - installing Syslinux with --raid"
-        "$extlinux" --install "$bootpath" -r > /dev/null 2>&1
-    else
-        "$extlinux" --install "$bootpath" > /dev/null 2>&1
-    fi
-
-    if (( $? )); then
-        echo "Syslinux install failed"
-        exit 2
-    else
-        echo "Syslinux install successful"
-    fi
-
-    touch "$CHROOT/$autoupdate_file"
-}
-
-update() {
-    # Update any com and c32 files in /boot
-    if [[ "$boot" = boot ]]; then
-        for file in "$bootpath"/*.{c32,com}; do
-            file=$(basename "$file")
-            cp "$libpath/$file" "$bootpath/$file" &> /dev/null
-        done
-        if [[ -f "$bootpath/pci.ids" ]]; then
-            cp "$pciids_file" "$bootpath/pci.ids" &> /dev/null
-        fi
-    fi
-
-    if device_is_raid $bootpart; then
-        echo "Detected RAID on /boot - installing Syslinux with --raid"
-        "$extlinux" --update "$bootpath" -r &> /dev/null
-    else
-        "$extlinux" --update "$bootpath" &> /dev/null
-    fi
-
-    if (($?)); then
-        echo "Syslinux update failed"
-        exit 2
-    else
-        echo "Syslinux update successful"
-    fi
-}
-
-if (( $# == 0 )); then
-    usage
-    exit 1
-fi
-
-while getopts "c:uihmas" opt; do
-    case $opt in
-        c)
-            CHROOT=$(readlink -e "$OPTARG")
-            if [[ -z $CHROOT ]]; then
-                echo "error: chroot path ``$OPTARG does not exist";
-                exit 1
-            fi
-            ;;
-        h)
-            USAGE="True"
-            ;;
-        i)
-            INSTALL="True"
-            ;;
-        u)
-            UPDATE="True"
-            ;;
-        m)
-            MBR="True"
-            ;;
-        a)
-            SET_ACTIVE="True"
-            ;;
-        s)
-            # If AUTOUPDATE_FILE does not exist exit the script
-            if [[ -f $autoupdate_file ]]; then
-                UPDATE="True"
-            else
-                exit 0
-            fi
-            ;;
-        *)
-            usage
-            exit 1
-            ;;
-    esac
-done
-
-if [[ $USAGE ]]; then
-    usage
-    exit 0
-fi
-
-# Make sure only root can run our script
-if (( $(id -u) != 0 )); then
-    echo "This script must be run as root" 1>&2
-    exit 1
-fi
-
-# Display Usage Information if both Install and Update are passed
-if [[ $INSTALL && $UPDATE ]]; then
-    usage
-    exit 1
-fi
-
-# If a chroot dir is path set variables to reflect chroot
-if [[ "$CHROOT" ]]; then
-    libpath="$CHROOT$libpath"
-    bootpath="$CHROOT$bootpath"
-    extlinux="$CHROOT$extlinux"
-fi
-
-# Exit if no /boot path exists
-if ( f=("$bootpath"/*); (( ! ${#f[@]} )) ); then
-    echo "Error: $bootpath is empty!"
-    echo "Is /boot mounted?"
-    exit 1
-fi
-
-# Get the boot device if any of these options are passed
-if [[ $INSTALL || $UPDATE || $SET_ACTIVE || $MBR ]]; then
-    getBoot
-fi
-
-# Install or Update
-if [[ $INSTALL ]]; then
-    _install || exit
-elif [[ $UPDATE ]]; then
-    update || exit
-fi
-
-
-# SET_ACTIVE and MBR
-if [[ $SET_ACTIVE ]] || [[ $MBR ]]; then
-    get_boot_devices
-
-    if [[ $SET_ACTIVE ]]; then
-        set_active || exit
-    fi
-
-    if [[ $MBR ]]; then
-        install_mbr || exit
-    fi
-fi
-
-exit 0
-
-# vim: set et sw=4:
diff --git a/testing/syslinux/syslinux.cfg b/testing/syslinux/syslinux.cfg
deleted file mode 100644
index 5a588f58c..000000000
--- a/testing/syslinux/syslinux.cfg
+++ /dev/null
@@ -1,79 +0,0 @@
-# Config file for Syslinux -
-# /boot/syslinux/syslinux.cfg
-#
-# Comboot modules:
-#   * menu.c32 - provides a text menu
-#   * vesamenu.c32 - provides a graphical menu
-#   * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
-#   * hdt.c32 - hardware detection tool
-#   * reboot.c32 - reboots the system
-#   * poweroff.com - shutdown the system
-#
-# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
-# If /usr and /boot are on the same file system, symlink the files instead
-# of copying them.
-#
-# If you do not use a menu, a 'boot:' prompt will be shown and the system
-# will boot automatically after 5 seconds.
-#
-# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
-# The wiki provides further configuration examples
-
-DEFAULT arch
-PROMPT 0        # Set to 1 if you always want to display the boot: prompt 
-TIMEOUT 50
-# You can create syslinux keymaps with the keytab-lilo tool
-#KBDMAP de.ktl
-
-# Menu Configuration
-# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux 
-UI menu.c32
-#UI vesamenu.c32
-
-# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
-MENU TITLE Arch Linux
-#MENU BACKGROUND splash.png
-MENU COLOR border       30;44   #40ffffff #a0000000 std
-MENU COLOR title        1;36;44 #9033ccff #a0000000 std
-MENU COLOR sel          7;37;40 #e0ffffff #20ffffff all
-MENU COLOR unsel        37;44   #50ffffff #a0000000 std
-MENU COLOR help         37;40   #c0ffffff #a0000000 std
-MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
-MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
-MENU COLOR msg07        37;40   #90ffffff #a0000000 std
-MENU COLOR tabmsg       31;40   #30ffffff #00000000 std
-
-# boot sections follow
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-
-LABEL arch
-	MENU LABEL Arch Linux
-	LINUX ../vmlinuz-linux
-	APPEND root=/dev/sda3 ro
-	INITRD ../initramfs-linux.img
-
-LABEL archfallback
-	MENU LABEL Arch Linux Fallback
-	LINUX ../vmlinuz-linux
-	APPEND root=/dev/sda3 ro
-	INITRD ../initramfs-linux-fallback.img
-
-#LABEL windows
-#        MENU LABEL Windows
-#        COM32 chain.c32
-#        APPEND hd0 1
-
-LABEL hdt
-        MENU LABEL HDT (Hardware Detection Tool)
-        COM32 hdt.c32
- 
-LABEL reboot
-        MENU LABEL Reboot
-        COM32 reboot.c32
- 
-LABEL off
-        MENU LABEL Power Off
-        COMBOOT poweroff.com
diff --git a/testing/syslinux/syslinux.install b/testing/syslinux/syslinux.install
deleted file mode 100644
index 0dc0ece36..000000000
--- a/testing/syslinux/syslinux.install
+++ /dev/null
@@ -1,13 +0,0 @@
-post_install() {
-  echo "==> If you want to use syslinux as your bootloader"
-  echo "==> edit /boot/syslinux/syslinux.cfg and run"
-  echo "==>   # /usr/sbin/syslinux-install_update -i -a -m"
-  echo "==> to install it."
-}
-
-post_upgrade() {
-  # auto-update syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
-  /usr/sbin/syslinux-install_update -s
-}
-
-# vim:set ts=2 sw=2 et: