Mon Feb 20 16:59:52 UTC 2012

5 files changed, 0 insertions, 167 deletions

diff --git a/testing/udev/PKGBUILD b/testing/udev/PKGBUILD
deleted file mode 100644
index 531c062d3..000000000
--- a/testing/udev/PKGBUILD
+++ /dev/null
@@ -1,70 +0,0 @@
-# $Id: PKGBUILD 150221 2012-02-15 08:53:37Z tomegun $
-# Maintainer: Tom Gundersen <teg@jklm.no>
-# Contributor: Aaron Griffin <aaron@archlinux.org>
-# Contributor: Tobias Powalowski <tpowa@archlinux.org>
-# Contributor: Thomas Bächler <thomas@archlinux.org>
-
-pkgname=udev
-pkgver=181
-pkgrel=3
-pkgdesc="The userspace dev tools (udev)"
-depends=('util-linux' 'libusb-compat' 'glib2' 'kmod' 'pciutils' 'usbutils' 'pciutils')
-install=udev.install
-arch=(i686 x86_64)
-license=('GPL')
-makedepends=('gobject-introspection' 'gperf' 'libxslt' 'usbutils' 'kmod')
-source=(ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/$pkgname-$pkgver.tar.xz
-	initcpio-hooks-udev
-	initcpio-install-udev
-	modprobe.nouevau.conf)
-url="http://git.kernel.org/?p=linux/hotplug/udev.git;a=summary"
-backup=(etc/udev/udev.conf)
-groups=('base')
-options=(!makeflags !libtool)
-
-build() {
-  cd $srcdir/$pkgname-$pkgver
-
-  ./configure --prefix=/usr \
-              --with-rootprefix= \
-              --sysconfdir=/etc \
-              --libdir=/usr/lib \
-              --libexecdir=/lib \
-              --with-systemdsystemunitdir=/lib/systemd/system \
-              --enable-udev_acl
-
-  make
-}
-  
-package() {
-  cd $srcdir/$pkgname-$pkgver
-  make DESTDIR=${pkgdir} install
-
-  # /dev/loop0 is created for convenience, to autoload the module if necessary
-  # this is no longer needed when util-linux-2.21 is released as /dev/loop-control
-  # will be used instead. Support for this will go away in a future version of udev
-  install -d -m755 ${pkgdir}/lib/udev/devices/
-  mknod ${pkgdir}/lib/udev/devices/loop0 b 7 0
-  chgrp disk ${pkgdir}/lib/udev/devices/loop0
- 
-  # udevd moved, symlink to make life easy for restarting udevd manually
-  ln -s /lib/udev/udevd ${pkgdir}/usr/bin/udevd
-
-  # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group
-  for i in $pkgdir/lib/udev/rules.d/*.rules; do
-    sed -i -e 's#GROUP="dialout"#GROUP="uucp"#g;
-               s#GROUP="tape"#GROUP="storage"#g;
-               s#GROUP="cdrom"#GROUP="optical"#g' $i
-  done
-
-  # nouveau still conflicts with some other standard kernel modules, should go away soon
-  install -D -m644 ../modprobe.nouevau.conf ${pkgdir}/lib/modprobe.d/nouveau.conf
-
-  # install the mkinitpcio hook
-  install -D -m644 ../initcpio-hooks-udev ${pkgdir}/lib/initcpio/hooks/udev
-  install -D -m644 ../initcpio-install-udev ${pkgdir}/lib/initcpio/install/udev
-}
-md5sums=('0d7af750702620a871b9f9b98d8ad859'
-         'a4dd853050bf2e0ae6b2e3d2c75499c2'
-         'ee0bfe91a20fff12cc25ab1d1e024853'
-         '633dabda1fbfa4b6fe4dab5452b40fed')
diff --git a/testing/udev/initcpio-hooks-udev b/testing/udev/initcpio-hooks-udev
deleted file mode 100644
index 87aa7960f..000000000
--- a/testing/udev/initcpio-hooks-udev
+++ /dev/null
@@ -1,9 +0,0 @@
-# vim: set ft=sh:
-run_hook ()
-{
-    msg -n ":: Triggering uevents..."
-    udevadm trigger --action=add --type=subsystems
-    udevadm trigger --action=add --type=devices
-    udevadm settle
-    msg "done."
-}
diff --git a/testing/udev/initcpio-install-udev b/testing/udev/initcpio-install-udev
deleted file mode 100644
index e7e2c0f60..000000000
--- a/testing/udev/initcpio-install-udev
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    FILES="/etc/udev/udev.conf"
-    SCRIPT="udev"
-
-    add_binary /lib/udev/udevd
-    add_binary /usr/bin/udevadm
-
-    for rules in 50-udev-default.rules 60-persistent-storage.rules 80-drivers.rules; do
-        add_file "/lib/udev/rules.d/$rules"
-    done
-    for tool in ata_id scsi_id; do
-        add_file "/lib/udev/$tool"
-    done
-}
-
-help() {
-    cat <<HELPEOF
-This hook will use udev to create your root device node and detect the needed
-modules for your root device. It is also required for firmware loading in
-initramfs. It is recommended to use this hook.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:
diff --git a/testing/udev/modprobe.nouevau.conf b/testing/udev/modprobe.nouevau.conf
deleted file mode 100644
index 265f033ab..000000000
--- a/testing/udev/modprobe.nouevau.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# The following modules conflict with nouveau
-# They will probably soon be disabled from the stock kernel
-# config, and this file will go away.
-# See <http://nouveau.freedesktop.org/wiki/KernelModeSetting>
-#
-blacklist nvidiafb
-blacklist rivafb
diff --git a/testing/udev/udev.install b/testing/udev/udev.install
deleted file mode 100644
index 58d1111fb..000000000
--- a/testing/udev/udev.install
+++ /dev/null
@@ -1,55 +0,0 @@
-# arg 1:  the new package version
-# arg 2:  the old package version
-
-post_upgrade() {
-  if [ "$(vercmp $2 181)" -lt 0 ]; then
-    echo "udev changes:"
-    if [ "$(vercmp $2 168)" -lt 0 ]; then
-      echo " * Kernel 2.6.32 or newer is now required."
-      echo " * OSS emulation modules are not loaded by default, add to rc.conf if needed."
-      echo " * Arch specific cd symlinks are now no longer created."
-      echo " * cd and net persistent rules will no longer be autogenerated,"
-      echo "   see <https://wiki.archlinux.org/index.php/Udev> for details."
-      echo " * Errors are now logged (possibly to the console) by default."
-    fi
-    if [ "$(vercmp $2 171)" -lt 0 ]; then
-      echo " * Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and"
-      echo "   blacklisting in MODULES no longer works."
-      echo "   See 'man modprobe.conf' for a replacement to blacklisting."
-      echo "   To disable a module mod1 on the kernel command line, use"
-      echo "     mod1.disable=1"
-      echo "   or"
-      echo "     modprobe.blacklist=mod1"
-      echo " * The following modules are no longer unconditionally loaded:"
-      echo "     pcspkr irtty-sir analog lp ppdev ide-generic"
-      echo "   Add them to MODULES in rc.conf if you need them."
-    fi
-    if [ "$(vercmp $2 172)" -lt 0 ]; then
-      echo " * Blacklisting of framebuffer devices has moved from /etc/modprobe.d to"
-      echo "   /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it"
-      echo "   takes precedence."
-      echo " * kbd and rtc devices are no longer world readable."
-      echo " * rtc is no longer in the audio group and fb devices are no longer in"
-      echo "   the video group, as permissions and ownership of fb devices are controlled"
-      echo "   by X."
-    fi
-    if [ "$(vercmp $2 174)" -lt 0 ]; then
-      echo " * We now use upstream rules for assigning devices to the 'disk', 'optical',"
-      echo "   'scanner' and 'video' groups. Beware of any changes."
-      echo " * We no longer create symlinks from /dev/<dev> to /dev/<dev>0."
-      echo " * For security reasons, we no longer add devices to the 'storage' group. Use"
-      echo "   udisks and friends, or add custom rules to /etc/udev.d/rules/, if you want"
-      echo "   this functionality back."
-      echo " * We no longer create the static nodes on install needed for an initrd-less"
-      echo "   boot where devtmpfs is not mounted by the kernel, this only affects fresh"
-      echo "   installs."
-    fi
-    if [ "$(vercmp $2 175)" -lt 0 ]; then
-      echo " * devtmpfs support is now a hard requirement. Users of the official Arch"
-      echo "   kernels have this enabled."
-    fi
-    echo " * udev-compat has been removed, and should be uninstalled."
-    echo " * Framebuffers are no longer blacklisted by default."
-    echo " * binaries moved from /sbin to /usr/bin"
-  fi
-}