1 files changed, 119 insertions, 0 deletions
diff --git a/testing/lm_sensors/sensors.rc b/testing/lm_sensors/sensors.rc
new file mode 100644
index 000000000..4acde2202
--- /dev/null
+++ b/testing/lm_sensors/sensors.rc
@@ -0,0 +1,119 @@
+#!/bin/bash
+
+# description: sensors is used for monitoring motherboard sensor values.
+# config: /etc/conf.d/lm_sensors
+
+# See also the lm_sensors homepage at:
+#     http://www2.lm-sensors.nu/~lm78/index.html
+
+# It uses a config file /etc/conf.d/lm_sensors that contains the modules to
+# be loaded/unloaded. That file is sourced into this one.
+
+# The format of that file a shell script that simply defines the modules
+# in order as normal shell variables with the special names:
+#    MODULE_1, MODULE_2, MODULE_3, etc.
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PSENSORS=/usr/bin/sensors
+
+if $(grep -q sysfs /proc/mounts); then
+  WITHSYS=1
+else
+  WITHSYS=0
+fi
+
+if [ $WITHSYS == "0" ]; then
+  # If sensors isn't supported by the kernel, try loading the module...
+  [ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null
+
+  # Don't bother if /proc/sensors still doesn't exist, kernel doesn't have support for sensors.
+  if ! [ -e /proc/sys/dev/sensors ]; then
+    echo  "lm_sensors: kernel does not have sensors support"
+    stat_fail
+  fi
+
+  # If sensors was not already running, unload the module...
+  [ -e /var/run/daemons/sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null
+fi
+
+if [ -e /etc/conf.d/lm_sensors ]; then
+  CONFIG=/etc/conf.d/lm_sensors
+elif [ -e /etc/sysconfig/lm_sensors ]; then
+  # Moving config to new Arch-specific location
+  mv /etc/sysconfig/lm_sensors /etc/conf.d/lm_sensors
+  CONFIG=/etc/conf.d/lm_sensors
+fi
+
+case "$1" in
+  start)
+    stat_busy "Starting Up Sensors"
+
+    if [ -r "$CONFIG" ]; then
+      . "$CONFIG"
+      modules=$(grep \^MODULE_ $CONFIG | wc -l | tr -d ' ')
+      i=0
+      while [ $i -lt $modules ] ; do
+        module=$(eval echo '$'MODULE_$i)
+       # echo starting module __${module}__ #debug
+        /sbin/modprobe $module &>/dev/null
+        i=$(expr $i + 1)
+      done
+    fi
+
+    $PSENSORS -s
+
+    if [ $? -gt 0 ]; then
+      stat_fail
+    else
+      add_daemon sensors
+      stat_done
+    fi	  
+    ;;
+
+  stop)
+    stat_busy "Shutting Down Sensors"
+
+    if [ -r "$CONFIG" ]; then
+      . "$CONFIG"
+      modules=$(grep \^MODULE_ $CONFIG | wc -l | tr -d ' ')
+      i=$(expr $modules - 1)
+      while [ $i -ge 0 ] ; do
+        module=$(eval echo '$'MODULE_$i)
+      #  echo stoping module __${module}__ #debug
+        /sbin/modprobe -r $module &>/dev/null
+        i=$(expr $i - 1)
+      done
+    fi
+
+    if [ $WITHSYS == "0" ]; then
+      /sbin/modprobe -r i2c-proc &>/dev/null
+    fi
+
+    if [ $? -gt 0 ]; then
+      stat_fail
+    else
+      rm_daemon sensors
+      stat_done
+    fi
+    ;;
+    
+  status)
+    $PSENSORS
+    ;;
+    
+  restart)
+    $0 stop
+    sleep 1
+    $0 start
+    ;;
+
+  condrestart)
+    [ -e /var/run/daemons/sensors ] && $0 restart || :
+    ;;
+
+  *)
+    echo "Usage: $0 {start|stop|restart|status|condrestart}"
+esac
+exit 0