7 files changed, 400 insertions, 0 deletions
diff --git a/testing/mysql/PKGBUILD b/testing/mysql/PKGBUILD
new file mode 100644
index 000000000..37a1225e0
--- /dev/null
+++ b/testing/mysql/PKGBUILD
@@ -0,0 +1,133 @@
+# $Id: PKGBUILD 165266 2012-08-14 18:43:18Z andrea $
+# Maintainer: Andrea Scarpino <andrea@archlinux.org>
+# Contributor: Douglas Soares de Andrade <douglas@archlinux.org>
+
+pkgbase=mysql
+pkgname=('libmysqlclient' 'mysql-clients' 'mysql')
+pkgver=5.5.27
+pkgrel=2
+arch=('i686' 'x86_64')
+license=('GPL')
+url="https://www.mysql.com/products/community/"
+makedepends=('cmake' 'openssl' 'zlib')
+options=('!libtool')
+source=("http://ftp.gwdg.de/pub/misc/mysql/Downloads/MySQL-5.5/${pkgbase}-${pkgver}.tar.gz"
+        'mysqld.rc' 'my.cnf' 'mysqld-post.sh' 'mysqld-tmpfile.conf' 'mysqld.service')
+md5sums=('82baf46acfced6eef072e9d8a479c86e'
+         'e7eb2faeab755cbb2fe03542bf328da9'
+         '1c949c0dbea5206af0db14942d9927b6'
+         'f772d69f43f6563c6e5434e988612b00'
+         '2fa6e456964d4ff5e6d4f9ff0126aed6'
+         'a0e1460c276a50a9666c331de83271f2')
+
+build() {
+  mkdir build
+  cd build
+
+  # CFLAGS/CXXFLAGS as suggested upstream
+
+  cmake ../${pkgbase}-${pkgver} \
+    -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DSYSCONFDIR=/etc/mysql \
+    -DMYSQL_DATADIR=/var/lib/mysql \
+    -DMYSQL_UNIX_ADDR=/run/mysqld/mysqld.sock \
+    -DDEFAULT_CHARSET=utf8 \
+    -DDEFAULT_COLLATION=utf8_general_ci \
+    -DENABLED_LOCAL_INFILE=ON \
+    -DINSTALL_INFODIR=share/mysql/docs \
+    -DINSTALL_MANDIR=share/man \
+    -DINSTALL_PLUGINDIR=/usr/lib/mysql/plugin \
+    -DINSTALL_SCRIPTDIR=bin \
+    -DINSTALL_INCLUDEDIR=include/mysql \
+    -DINSTALL_DOCREADMEDIR=share/mysql \
+    -DINSTALL_SUPPORTFILESDIR=share/mysql \
+    -DINSTALL_MYSQLSHAREDIR=share/mysql \
+    -DINSTALL_DOCDIR=share/mysql/docs \
+    -DINSTALL_SHAREDIR=share/mysql \
+    -DWITH_READLINE=ON \
+    -DWITH_ZLIB=system \
+    -DWITH_SSL=system \
+    -DWITH_LIBWRAP=OFF \
+    -DWITH_MYSQLD_LDFLAGS="${LDFLAGS}" \
+    -DWITH_EXTRA_CHARSETS=complex \
+    -DWITH_EMBEDDED_SERVER=ON \
+    -DWITH_INNOBASE_STORAGE_ENGINE=1 \
+    -DWITH_PARTITION_STORAGE_ENGINE=1 \
+    -DWITHOUT_EXAMPLE_STORAGE_ENGINE=1 \
+    -DWITHOUT_ARCHIVE_STORAGE_ENGINE=1 \
+    -DWITHOUT_BLACKHOLE_STORAGE_ENGINE=1 \
+    -DWITHOUT_FEDERATED_STORAGE_ENGINE=1 \
+    -DCMAKE_C_FLAGS="-fPIC ${CFLAGS} -fno-strict-aliasing -DBIG_JOINS=1 -fomit-frame-pointer" \
+    -DCMAKE_CXX_FLAGS="-fPIC ${CXXFLAGS} -fno-strict-aliasing -DBIG_JOINS=1 -felide-constructors -fno-rtti"
+
+  make
+}
+
+package_libmysqlclient(){
+  pkgdesc="MySQL client libraries"
+  depends=('openssl')
+  
+  cd build
+  for dir in include libmysql libmysqld libservices; do
+    make -C ${dir} DESTDIR="${pkgdir}" install
+  done
+
+  install -d "${pkgdir}"/usr/bin
+  install -m755 scripts/mysql_config "${pkgdir}"/usr/bin/
+  install -d "${pkgdir}"/usr/share/man/man1
+  for man in mysql_config mysql_client_test_embedded mysqltest_embedded; do
+    install -m644 "${srcdir}"/${pkgbase}-${pkgver}/man/$man.1 "${pkgdir}"/usr/share/man/man1/$man.1
+  done
+}
+
+package_mysql-clients(){
+  pkgdesc="MySQL client tools"
+  depends=('libmysqlclient')
+  
+  cd build
+  make -C client DESTDIR="${pkgdir}" install
+
+  # install man pages
+  install -d "${pkgdir}"/usr/share/man/man1
+  for man in mysql mysqladmin mysqlcheck mysqldump mysqlimport mysqlshow mysqlslap; do
+    install -m644 "${srcdir}"/${pkgbase}-${pkgver}/man/$man.1 "${pkgdir}"/usr/share/man/man1/$man.1
+  done
+
+  # provided by mysql
+  rm "${pkgdir}"/usr/bin/{mysql_{plugin,upgrade},mysqlbinlog,mysqltest}
+}
+
+package_mysql(){
+  pkgdesc="A fast SQL database server"
+  backup=('etc/mysql/my.cnf')
+  install=mysql.install
+  depends=('mysql-clients' 'systemd-tools')
+  options=('emptydirs')
+
+  cd build
+  make DESTDIR="${pkgdir}" install
+
+  install -Dm644 "${srcdir}"/my.cnf "${pkgdir}"/etc/mysql/my.cnf
+  install -Dm755 "${srcdir}"/mysqld.rc "${pkgdir}"/etc/rc.d/mysqld
+  install -Dm755 "${srcdir}"/mysqld-post.sh "${pkgdir}"/usr/bin/mysqld-post
+  install -Dm644 "${srcdir}"/mysqld-tmpfile.conf "${pkgdir}"/etc/tmpfiles.d/mysqld.conf
+  install -d "${pkgdir}"/usr/lib/systemd/system
+  install -Dm644 "${srcdir}"/mysqld.service "${pkgdir}"/usr/lib/systemd/system/
+
+  # provided by libmysqlclient
+  rm "${pkgdir}"/usr/bin/{mysql_config,mysql_client_test_embedded,mysqltest_embedded}
+  rm "${pkgdir}"/usr/lib/libmysql*
+  rm -r "${pkgdir}"/usr/include/
+  rm "${pkgdir}"/usr/share/man/man1/{mysql_config,mysql_client_test_embedded,mysqltest_embedded}.1
+  
+  # provided by mysql-clients
+  rm "${pkgdir}"/usr/bin/{mysql,mysqladmin,mysqlcheck,mysqldump,mysqlimport,mysqlshow,mysqlslap}
+  rm "${pkgdir}"/usr/share/man/man1/{mysql,mysqladmin,mysqlcheck,mysqldump,mysqlimport,mysqlshow,mysqlslap}.1
+
+  # not needed
+  rm -r "${pkgdir}"/usr/{data,mysql-test,sql-bench}
+  rm "${pkgdir}"/usr/share/man/man1/mysql-test-run.pl.1
+
+  install -dm700 "${pkgdir}"/var/lib/mysql
+}
diff --git a/testing/mysql/my.cnf b/testing/mysql/my.cnf
new file mode 100644
index 000000000..9a41b4fc3
--- /dev/null
+++ b/testing/mysql/my.cnf
@@ -0,0 +1,145 @@
+# MySQL config file for medium systems.
+#
+# This is for a system with little memory (32M - 64M) where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# MySQL programs look for option files in a set of
+# locations which depend on the deployment platform.
+# You can copy this option file to one of those
+# locations. For information about these locations, see:
+# http://dev.mysql.com/doc/mysql/en/option-files.html
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+[client]
+#password	= your_password
+port		= 3306
+socket		= /var/run/mysqld/mysqld.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+port		= 3306
+socket		= /var/run/mysqld/mysqld.sock
+datadir		= /var/lib/mysql
+skip-external-locking
+key_buffer_size = 16M
+max_allowed_packet = 1M
+table_open_cache = 64
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+# 
+skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+log-bin=mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=mixed
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+server-id	= 1
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+#innodb_data_home_dir = /var/lib/mysql
+#innodb_data_file_path = ibdata1:10M:autoextend
+#innodb_log_group_home_dir = /var/lib/mysql
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+#innodb_buffer_pool_size = 16M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+#innodb_log_file_size = 5M
+#innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+#innodb_lock_wait_timeout = 50
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20M
+sort_buffer_size = 20M
+read_buffer = 2M
+write_buffer = 2M
+
+[mysqlhotcopy]
+interactive-timeout
diff --git a/testing/mysql/mysql.install b/testing/mysql/mysql.install
new file mode 100644
index 000000000..a98f1a877
--- /dev/null
+++ b/testing/mysql/mysql.install
@@ -0,0 +1,28 @@
+post_install(){
+  groupadd -g 89 mysql &>/dev/null
+  useradd -u 89 -g mysql -d /var/lib/mysql -s /bin/false mysql &>/dev/null
+  usr/bin/mysql_install_db --user=mysql --basedir=/usr
+  chown -R mysql:mysql var/lib/mysql &>/dev/null
+
+  usr/bin/systemd-tmpfiles --create mysqld.conf
+}
+
+post_upgrade(){
+  getent group mysql >/dev/null 2>&1 || groupadd -g 89 mysql &>/dev/null
+  getent passwd mysql >/dev/null 2>&1 || useradd -u 89 -g mysql -d /var/lib/mysql -s /bin/false mysql &>/dev/null
+
+  if [ "$(vercmp $2 5.5)" -lt 0 ]; then
+    echo " >> "
+    echo " >> Major version update. Consider restart the service, and then running mysql_upgrade after it."
+    echo " >> "
+  fi
+}
+
+post_remove(){
+  if getent passwd mysql >/dev/null 2>&1; then
+    userdel mysql
+  fi
+  if getent group mysql >/dev/null 2>&1; then
+    groupdel mysql
+  fi
+}
diff --git a/testing/mysql/mysqld-post.sh b/testing/mysql/mysqld-post.sh
new file mode 100755
index 000000000..6747c634c
--- /dev/null
+++ b/testing/mysql/mysqld-post.sh
@@ -0,0 +1,5 @@
+while true; do
+    response=`/usr/bin/mysqladmin -uUNKNOWN_USER ping 2>&1` && break
+    echo "$response" | grep -q "mysqld is alive" && break
+    sleep 1
+done
diff --git a/testing/mysql/mysqld-tmpfile.conf b/testing/mysql/mysqld-tmpfile.conf
new file mode 100644
index 000000000..6883dc798
--- /dev/null
+++ b/testing/mysql/mysqld-tmpfile.conf
@@ -0,0 +1 @@
+d /run/mysqld 0755 mysql mysql -
diff --git a/testing/mysql/mysqld.rc b/testing/mysql/mysqld.rc
new file mode 100755
index 000000000..4bbddb5a4
--- /dev/null
+++ b/testing/mysql/mysqld.rc
@@ -0,0 +1,77 @@
+#!/bin/bash
+
+# general config
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+getPID() {
+   echo $(pgrep -u mysql mysqld 2>/dev/null);
+}
+
+case "$1" in
+  start)
+    stat_busy "Starting MySQL Server"
+    [ ! -d /run/mysqld ] && install -d -g mysql -o mysql /run/mysqld &>/dev/null
+    if [ -z "$(getPID)" ]; then
+       /usr/bin/mysqld_safe --user=mysql &>/dev/null &
+      if [ $? -gt 0 ]; then
+        stat_fail
+        exit 1
+      else
+        timeo=30
+        while [ $timeo -gt 0 ]; do
+          response=`/usr/bin/mysqladmin -uUNKNOWN_USER ping 2>&1` && break
+          echo "$response" | grep -q "mysqld is alive" && break
+          sleep 1
+          let timeo=${timeo}-1
+        done
+        if [ $timeo -eq 0 ]; then
+          stat_fail
+          exit 1
+        else
+          echo $(getPID) > /run/mysqld/mysqld.pid
+          add_daemon mysqld
+          stat_done
+        fi
+      fi
+    else
+      stat_fail
+      exit 1
+    fi
+    ;;
+
+  stop)
+    stat_busy "Stopping MySQL Server"
+    if [ ! -z "$(getPID)" ]; then
+      timeo=30
+      kill $(getPID) &> /dev/null
+      if [ $? -gt 0 ]; then
+        stat_fail
+        exit 1
+      fi
+      while [ ! -z "$(getPID)" -a $timeo -gt 0 ]; do
+        sleep 1
+        let timeo=${timeo}-1
+      done
+      if [ -z "$(getPID)" ]; then
+        rm -f /run/mysqld/mysqld.pid &>/dev/null
+        rm_daemon mysqld
+        stat_done
+      else
+        stat_fail
+        exit 1
+      fi
+    else
+      stat_fail
+      exit 1
+    fi
+    ;;
+
+  restart)
+    $0 stop
+    $0 start
+    ;;
+  *)
+    echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
diff --git a/testing/mysql/mysqld.service b/testing/mysql/mysqld.service
new file mode 100644
index 000000000..0175c685b
--- /dev/null
+++ b/testing/mysql/mysqld.service
@@ -0,0 +1,11 @@
+[Unit]
+Description=MySQL Server
+
+[Service]
+User=mysql
+ExecStart=/usr/bin/mysqld --user=mysql
+ExecStartPost=/usr/bin/mysqld-post
+Restart=always
+
+[Install]
+WantedBy=multi-user.target