Sun Feb 10 01:12:35 PST 2013

1 files changed, 0 insertions, 362 deletions

diff --git a/community/multipath-tools/multipath.conf.annotated b/community/multipath-tools/multipath.conf.annotated
deleted file mode 100644
index b79488413..000000000
--- a/community/multipath-tools/multipath.conf.annotated
+++ /dev/null
@@ -1,362 +0,0 @@
-##
-## This is a template multipath-tools configuration file
-## Uncomment the lines relevent to your environment
-##
-#
-##
-## name  : defaults
-## desc  : multipath-tools default settings
-##
-#defaults {
-#	#
-#	# name    : udev_dir
-#	# desc    : directory where udev creates its device nodes
-#	# default : /dev
-#	#
-#	udev_dir	/dev
-#
-#	#
-#	# name    : polling_interval
-#	# scope   : multipathd
-#	# desc    : interval between two path checks in seconds
-#	# default : 5
-#	#
-#	polling_interval 10
-#
-#	#
-#	# name    : selector
-#	# scope   : multipath
-#	# desc    : the default path selector algorithm to use
-#	#           these algorithms are offered by the kernel multipath target
-#	# values  : "round-robin 0"
-#	# default : "round-robin 0"
-#	#
-#	selector	"round-robin 0"
-#
-#	#
-#	# name    : path_grouping_policy
-#	# scope   : multipath
-#	# desc    : the default path grouping policy to apply to unspecified
-#	#           multipaths
-#	# default : multibus
-#	#
-#	path_grouping_policy	multibus
-#
-#	#
-#	# name    : getuid_callout
-#	# scope   : multipath
-#	# desc    : the default program and args to callout to obtain a unique 
-#	#           path identifier. Absolute path required
-#	# default : /usr/lib/udev/scsi_id -g -u -s
-#	#
-#	getuid_callout	"/usr/lib/udev/scsi_id -g -u -s /block/%n"
-#
-#	#
-#	# name    : prio_callout
-#	# scope   : multipath
-#	# desc    : the default program and args to callout to obtain a path 
-#	#           priority value. The ALUA bits in SPC-3 provide an
-#	#           exploitable prio value for example. "none" is a valid value
-#	# default : (null)
-#	#
-#	#prio_callout	"/bin/true"
-#
-#	#
-#	# name    : path_checker
-#	# scope   : multipath & multipathd
-#	# desc    : the default method used to determine the paths' state
-#	# values  : readsector0|tur|emc_clariion|hp_sw|directio
-#	# default : directio
-#	#
-#	#path_checker	directio
-#
-#	#
-#	# name    : rr_min_io
-#	# scope   : multipath
-#	# desc    : the number of IO to route to a path before switching
-#	#           to the next in the same path group
-#	# default : 1000
-#	#
-#	rr_min_io	100
-#
-#	#
-#	# name    : rr_weight
-#	# scope   : multipath
-#	# desc    : if set to priorities the multipath configurator will assign
-#	#	    path weights as "path prio * rr_min_io"
-#	# values  : priorities|uniform
-#	# default : uniform
-#	#
-#	rr_weight	priorities
-#
-#	#
-#	# name    : failback
-#	# scope   : multipathd
-#	# desc    : tell the daemon to manage path group failback, or not to.
-#	#	    0 means immediate failback, values >0 means deffered failback
-#	#	    expressed in seconds.
-#	# values  : manual|immediate|n > 0
-#	# default : immediate
-#	#
-#	failback	manual
-#
-#	#
-#	# name    : no_path_retry
-#	# scope   : multipath & multipathd
-#	# desc    : tell the number of retries until disable queueing, or
-#	#           "fail" means immediate failure (no queueing),
-#	#           "queue" means never stop queueing
-#	# values  : queue|fail|n (>0)
-#	# default : (null)
-#	#
-#	#no_path_retry  queue
-#
-#	#
-#	# name    : user_friendly_names
-#	# scope   : multipath
-#	# desc    : If set to "yes", using the bindings file
-#	#           /var/lib/multipath/bindings to assign a persistent and
-#	#           unique alias to the multipath, in the form of mpath<n>.
-#	#           If set to "no" use the WWID as the alias. In either case
-#	#           this be will be overriden by any specific aliases in this
-#	#           file.
-#	# values  : yes|no
-#	# default : no
-#	user_friendly_names no
-#
-#}
-#	
-##
-## name    : blacklist
-## scope   : multipath & multipathd
-## desc    : list of device names to discard as not multipath candidates
-## default : cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop
-##
-#blacklist {
-#       wwid 26353900f02796769
-#	devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
-#	devnode "^hd[a-z][[0-9]*]"
-#	devnode "^cciss!c[0-9]d[0-9]*[p[0-9]*]"
-#       device {
-#               vendor DEC.*
-#               product MSA[15]00
-#       }
-#}
-##
-## name    : blacklist_exceptions
-## scope   : multipath & multipathd
-## desc    : list of device names to be treated as multipath candidates
-##           even if they are on the blacklist.
-##           Note: blacklist exceptions are only valid in the same class.
-##           It is not possible to blacklist devices using the devnode keyword
-##           and to exclude some devices of them using the wwid keyword.
-## default : -
-##
-#blacklist_exceptions {
-#       devnode "^dasd[c-d]+[0-9]*"
-#       wwid    "IBM.75000000092461.4d00.34"
-#       wwid    "IBM.75000000092461.4d00.35"
-#       wwid    "IBM.75000000092461.4d00.36"
-#}
-#
-##
-## name    : multipaths
-## scope   : multipath & multipathd
-## desc    : list of multipaths finest-grained settings
-##
-#multipaths {
-#	#
-#	# name  : multipath
-#	# scope : multipath & multipathd
-#	# desc  : container for settings that apply to one specific multipath
-#	#
-#	multipath {
-#		#
-#		# name  : wwid
-#		# scope : multipath & multipathd
-#		# desc  : index of the container
-#		#
-#		wwid			3600508b4000156d700012000000b0000
-#
-#		#
-#		# name    : alias
-#		# scope   : multipath
-#		# desc    : symbolic name for the multipath
-#		#
-#		alias			yellow
-#
-#		#
-#		# name    : path_grouping_policy
-#		# scope   : multipath
-#		# desc    : path grouping policy to apply to this multipath
-#		# values  : failover, multibus, group_by_serial
-#		# default : failover
-#		#
-#		path_grouping_policy	multibus
-#
-#		#
-#		# name    : path_checker
-#		# scope   : multipathd
-#		# desc    : path checking alorithm to use to check path state
-#		# values  : readsector0|tur|emc_clariion|hp_sw|directio
-#		# default : directio
-#		#
-#		# path_checker		directio
-#		
-#		#
-#		# name    : path_selector
-#		# desc    : the path selector algorithm to use for this mpath
-#		#           these algo are offered by the kernel mpath target
-#		# values  : "round-robin 0"
-#		# default : "round-robin 0"
-#		#
-#		path_selector		"round-robin 0"
-#
-#		#
-#		# name    : failback
-#		# scope   : multipathd
-#		# desc    : tell the daemon to manage path group failback, or not to.
-#		#	    0 means immediate failback, values >0 means deffered failback
-#		#	    expressed in seconds.
-#		# values  : manual|immediate|n > 0
-#		# default : immediate
-#		#
-#		failback		manual
-#
-#		#
-#		# name    : no_path_retry
-#		# scope   : multipath & multipathd
-#		# desc    : tell the number of retries until disable queueing, or
-#		#           "fail" means immediate failure (no queueing),
-#		#           "queue" means never stop queueing
-#		# values  : queue|fail|n (>0)
-#		# default : (null)
-#		#
-#		#no_path_retry  queue
-#
-#		#
-#		# name    : rr_min_io
-#		# scope   : multipath
-#		# desc    : the number of IO to route to a path before switching
-#		#           to the next in the same path group
-#		# default : 1000
-#		#
-#		rr_min_io	100
-#	}
-#	multipath {
-#		wwid	1DEC_____321816758474
-#		alias	red
-#		rr_weight		priorities
-#	}
-#}
-#
-##
-## name  : devices
-## scope : multipath & multipathd
-## desc  : list of per storage controller settings
-##	  overrides default settings (device_maps block)
-##         overriden by per multipath settings (multipaths block)
-##
-#devices {
-#	#
-#	# name  : device
-#	# scope : multipath & multipathd
-#	# desc  : settings for this specific storage controller
-#	#
-#	device {
-#		#
-#		# name  : vendor, product
-#		# scope : multipath & multipathd
-#		# desc  : index for the block
-#		#
-#		vendor			"COMPAQ  "
-#		product			"HSV110 (C)COMPAQ"
-#
-#		#
-#		# name    : path_grouping_policy
-#		# scope   : multipath
-#		# desc    : path grouping policy to apply to multipath hosted
-#		#           by this storage controller
-#		# values  : failover        = 1 path per priority group
-#		#           multibus        = all valid paths in 1 priority
-#		#                             group
-#		#           group_by_serial = 1 priority group per detected
-#		#                             serial number
-#		# default : failover
-#		#
-#		path_grouping_policy	multibus
-#
-#		#
-#		# name    : getuid_callout
-#		# scope   : multipath
-#		# desc    : the program and args to callout to obtain a unique 
-#		#           path identifier. Absolute path required
-#		# default : /usr/lib/udev/scsi_id -g -u -s
-#		#
-#		getuid_callout          "/usr/lib/udev/scsi_id -g -u -s /block/%n"
-#
-#		#
-#		# name    : prio_callout
-#		# scope   : multipath
-#		# desc    : the program and args to callout to obtain a path 
-#		#           weight. Weights are summed for each path group to
-#		#	    determine the next PG to use case of failure.
-#		#	    "none" is a valid value.
-#		# default : no callout, all paths equals
-#		#
-#		prio_callout          "/sbin/mpath_prio_balance_units %d"
-#
-#		#
-#		# name    : path_checker
-#		# scope   : multipathd
-#		# desc    : path checking alorithm to use to check path state
-#		# values  : readsector0|tur|emc_clariion|hp_sw|directio
-#		# default : directio
-#		#
-#		path_checker		directio
-#
-#		#
-#		# name    : path_selector
-#		# desc    : the path selector algorithm to use for this mpath
-#		#           these algo are offered by the kernel mpath target
-#		# values  : "round-robin 0"
-#		# default : "round-robin 0"
-#		#
-#		path_selector		"round-robin 0"
-#
-#		#
-#		# name    : failback
-#		# scope   : multipathd
-#		# desc    : tell the daemon to manage path group failback, or not to.
-#		#	    0 means immediate failback, values >0 means deffered failback
-#		#	    expressed in seconds.
-#		# values  : manual|immediate|n > 0
-#		# default : immediate
-#		#
-#		failback		30
-#
-#		#
-#		# name    : rr_min_io
-#		# scope   : multipath
-#		# desc    : the number of IO to route to a path before switching
-#		#           to the next in the same path group
-#		# default : 1000
-#		#
-#		rr_min_io	100
-#
-#		#
-#		# name    : product_blacklist
-#		# scope   : multipath & multipathd
-#		# desc    : product strings to blacklist for this vendor
-#		# default : none
-#		#
-#		product_blacklist	LUN_Z
-#	}
-#	device {
-#		vendor			"COMPAQ  "
-#		product			"MSA1000         "
-#		path_grouping_policy	multibus
-#		path_checker		tur
-#		rr_weight		priorities
-#	}
-#}