Fri Jul 1 04:58:02 UTC 2011

17 files changed, 0 insertions, 906 deletions

diff --git a/testing/shadow/LICENSE b/testing/shadow/LICENSE
deleted file mode 100644
index c5ab15a56..000000000
--- a/testing/shadow/LICENSE
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 1990 - 1994, Julianne Frances Haugh
- * Copyright (c) 1996 - 2000, Marek Michałkiewicz
- * Copyright (c) 2001 - 2006, Tomasz Kłoczko
- * Copyright (c) 2007 - 2009, Nicolas François
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the copyright holders or contributors may not be used to
- *    endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
- * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
diff --git a/testing/shadow/PKGBUILD b/testing/shadow/PKGBUILD
deleted file mode 100644
index b3a130166..000000000
--- a/testing/shadow/PKGBUILD
+++ /dev/null
@@ -1,106 +0,0 @@
-# $Id: PKGBUILD 129320 2011-06-26 16:36:48Z eric $
-# Maintainer: Aaron Griffin <aaron@archlinux.org>
-
-pkgname=shadow
-pkgver=4.1.4.3
-pkgrel=2
-pkgdesc="Password and account management tool suite with support for shadow files and PAM"
-arch=('i686' 'x86_64')
-url='http://pkg-shadow.alioth.debian.org/'
-license=('BSD')
-groups=('base')
-depends=('bash' 'pam' 'acl')
-backup=(etc/login.defs
-        etc/pam.d/{chage,login,passwd,shadow,useradd,usermod,userdel}
-        etc/pam.d/{chpasswd,newusers,groupadd,groupdel,groupmod}
-        etc/pam.d/{chfn,chgpasswd,groupmems,chsh}
-        etc/default/useradd)
-options=('!libtool')
-install=shadow.install
-#http://pkg-shadow.alioth.debian.org/releases/shadow-$pkgver.tar.bz2
-# shadow 4.1.4.3 is just shadow 4.1.4.2 with shadow_CVE-2011-0721.patch applied
-source=(ftp://ftp.archlinux.org/other/shadow/shadow_4.1.4.2+svn3283.orig.tar.gz
-        adduser chgpasswd chpasswd defaults.pam login login.defs newusers
-        passwd shadow.cron.daily useradd.defaults LICENSE
-        xstrdup.patch shadow_CVE-2011-0721.patch shadow-strncpy-usage.patch
-        shadow-add-missing-include.patch)
-sha1sums=('8b704b8f07718e329205f23d457c3121c0f3679e'
-          '78ec184a499f9708adcfcf0b7a3b22a60bf39f91'
-          '4ad0e059406a305c8640ed30d93c2a1f62c2f4ad'
-          'd66096ed9477bd7242e8d2cc28eaa23170269788'
-          '0e56fed7fc93572c6bf0d8f3b099166558bb46f1'
-          '0b2d98a0ee3bfde8551ade48d4d35cc20ec702a1'
-          'e5cab2118ecb1e61874cde842d7d04d1003f35cb'
-          'd66096ed9477bd7242e8d2cc28eaa23170269788'
-          '6f183bc7709b0a8d20ad17481a4ad025cf6e5056'
-          '5d83ba7e11c765c951867cbe00b0ae7ff57148fa'
-          '9ae93de5987dd0ae428f0cc1a5a5a5cd53583f19'
-          '33a6cf1e44a1410e5c9726c89e5de68b78f5f922'
-          '6010fffeed1fc6673ad9875492e1193b1a847b53'
-          '6bfe6528391eb38d338beacedd620407877b637d'
-          '9db9e62ad173f31e1039121c0124cf60826ffd7e'
-          '0697a21f7519de30821da7772677035652df4ad2')
-
-build() {
-  cd "$srcdir/$pkgname-4.1.4.2+svn3283"
-
-  #Ugh, force this to build shared libraries, for god's sake
-  sed -i "s/noinst_LTLIBRARIES/lib_LTLIBRARIES/g" lib/Makefile.am
-  libtoolize
-  autoreconf
-  export LDFLAGS="$LDFLAGS -lcrypt"
-
-  patch -p1 -i "$srcdir/xstrdup.patch"
-  patch -p1 -i "$srcdir/shadow_CVE-2011-0721.patch"
-  patch -p1 -i "$srcdir/shadow-strncpy-usage.patch"
-  patch -p1 -i "$srcdir/shadow-add-missing-include.patch"
-
-  # supress etc/pam.d/*, we provide our own
-  sed -i '/^SUBDIRS/s/pam.d//' etc/Makefile.in
-
-  ./configure \
-    --prefix=/usr --libdir=/lib \
-    --mandir=/usr/share/man --sysconfdir=/etc \
-    --enable-shared --disable-static \
-    --with-libpam --without-selinux
-  make
-}
-
-package() {
-  cd "$srcdir/$pkgname-4.1.4.2+svn3283"
-  make DESTDIR="$pkgdir" install
-
-  # license
-  install -Dm644 "$srcdir/LICENSE" "$pkgdir/usr/share/licenses/shadow/LICENSE"
-
-  # interactive useradd
-  install -Dm755 "$srcdir/adduser" "$pkgdir/usr/sbin/adduser"
-
-  # useradd defaults
-  install -Dm644 "$srcdir/useradd.defaults" "$pkgdir/etc/default/useradd"
-
-  # cron job
-  install -Dm744 "$srcdir/shadow.cron.daily" "$pkgdir/etc/cron.daily/shadow"
-
-  # login.defs
-  install -Dm644 "$srcdir/login.defs" "$pkgdir/etc/login.defs"
-
-  # PAM config - custom
-  install -Dm644 "$srcdir/login" "$pkgdir/etc/pam.d/login"
-  install -Dm644 "$srcdir/passwd" "$pkgdir/etc/pam.d/passwd"
-  install -Dm644 "$srcdir/chgpasswd" "$pkgdir/etc/pam.d/chgpasswd"
-  install -Dm644 "$srcdir/chpasswd" "$pkgdir/etc/pam.d/chpasswd"
-  install -Dm644 "$srcdir/newusers" "$pkgdir/etc/pam.d/newusers"
-  # PAM config - from tarball
-  install -Dm644 etc/pam.d/groupmems "$pkgdir/etc/pam.d/groupmems"
-
-  # we use the 'useradd' PAM file for other similar utilities
-  for file in chage chfn chsh groupadd groupdel groupmod shadow \
-      useradd usermod userdel; do
-    install -Dm644 "$srcdir/defaults.pam" "$pkgdir/etc/pam.d/$file"
-  done
-
-  # Remove su - using su from coreutils instead
-  rm "$pkgdir/bin/su"
-  find "$pkgdir/usr/share/man" -name 'su.1' -delete
-}
diff --git a/testing/shadow/adduser b/testing/shadow/adduser
deleted file mode 100644
index a5d7fd4fa..000000000
--- a/testing/shadow/adduser
+++ /dev/null
@@ -1,399 +0,0 @@
-#!/bin/bash
-#
-# Copyright 1995  Hrvoje Dogan, Croatia.
-# Copyright 2002, 2003, 2004  Stuart Winter, West Midlands, England, UK.
-# Copyright 2004  Slackware Linux, Inc., Concord, CA, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-#
-##########################################################################
-# Program: /usr/sbin/adduser
-# Purpose: Interactive front end to /usr/sbin/useradd for Slackware Linux
-# Author : Stuart Winter <stuart@polplex.co.uk>
-#          Based on the original Slackware adduser by Hrvoje Dogan
-#          with modifications by Patrick Volkerding
-# Version: 1.09
-##########################################################################
-# Usage..: adduser [<new_user_name>]
-##########################################################################
-# History #
-###########
-# v1.09 - 07/06/04 
-#       * Added standard Slackware script licence to the head of this file.
-# v1.08 - 25/04/04
-#       * Disallow user names that begin with a numeric because useradd 
-#         (from shadow v4.03) does not allow them. <sw>
-# v1.07 - 07/03/03
-#       * When supplying a null string for the uid (meaning 'Choose next available'), 
-#         if there were file names in the range 'a-z' in the pwd then the 
-#         egrep command considered these files rather than the null string. 
-#         The egrep expression is now in quotes.  
-#         Reported & fixed by Vadim O. Ustiansky <sw>
-# v1.06 - 31/03/03
-#       * Ask to chown user.group the home directory if it already exists.
-#         This helps reduce later confusion when adding users whose home dir
-#         already exists (mounted partition for example) and is owned
-#         by a user other than the user to which the directory is being
-#         assigned as home.  Default is not to chown.
-#         Brought to my attention by mRgOBLIN. <sw>
-# v1.05 - 04/01/03
-#       * Advise & prevent users from creating logins with '.' characters
-#         in the user name. <sw>
-#       * Made pending account creation info look neater <sw>
-# v1.04 - 09/06/02
-#       * Catered for shadow-4.0.3's 'useradd' binary that no longer
-#         will let you create a user that has any uppercase chars in it
-#         This was reported on the userlocal.org forums
-#         by 'xcp' - thanks. <sw,pjv>
-# v1.03 - 20/05/02
-#       * Support 'broken' (null lines in) /etc/passwd and 
-#         /etc/group files <sw>       
-#       * For recycling UIDs (default still 'off'), we now look in 
-#         /etc/login.defs for the UID_MIN value and use it
-#         If not found then default to 1000 <sw>
-# v1.02 - 10/04/02
-#       * Fix user-specified UID bug. <pjv>
-# v1.01 - 23/03/02
-#       * Match Slackware indenting style, simplify. <pjv>
-# v1.00 - 22/03/02
-#       * Created
-#######################################################################
-
-# Path to files
-pfile=/etc/passwd
-gfile=/etc/group
-sfile=/etc/shells
-
-# Paths to binaries
-useradd=/usr/sbin/useradd
-chfn=/usr/bin/chfn
-passwd=/usr/bin/passwd
-
-# Defaults
-defhome=/home
-defshell=/bin/bash
-defgroup=users
-
-# Determine what the minimum UID is (for UID recycling)
-# (we ignore it if it's not at the beginning of the line (i.e. commented out with #))
-export recycleUIDMIN="$(grep ^UID_MIN /etc/login.defs | awk '{print $2}' 2>/dev/null)"
-# If we couldn't find it, set it to the default of 1000
-if [ -z "$recycleUIDMIN" ]; then
-   export recycleUIDMIN=1000  # this is the default from Slackware's /etc/login.defs
-fi
-
-
-# This setting enables the 'recycling' of older unused UIDs.
-# When you userdel a user, it removes it from passwd and shadow but it will
-# never get used again unless you specify it expliticly -- useradd (appears to) just
-# look at the last line in passwd and increment the uid.  I like the idea of 
-# recycling uids but you may have very good reasons not to (old forgotten
-# confidential files still on the system could then be owned by this new user).
-# We'll set this to no because this is what the original adduser shell script
-# did and it's what users expect.
-recycleuids=no
-
-# Function to read keyboard input.
-# bash1 is broken (even ash will take read -ep!), so we work around
-# it (even though bash1 is no longer supported on Slackware).
-function get_input() { 
-  local output
-  if [ "`echo $BASH_VERSION | cut -b1`" = "1" ]; then
-    echo -n "${1} " >&2 # fudge for use with bash v1
-    read output
-  else # this should work with any other /bin/sh
-    read -ep "${1} " output
-  fi
-  echo $output
-}
-
-# Function to display the account info
-function display () {
-  local goose
-  goose="$(echo $2 | cut -d ' ' -f 2-)"  # lop off the prefixed argument useradd needs
-  echo -n "$1 "
-  # If it's null then display the 'other' information
-  if [ -z "$goose" -a ! -z "$3" ]; then 
-    echo "$3" 
-  else 
-    echo "$goose" 
-  fi
-}
-
-# Function to check whether groups exist in the /etc/group file
-function check_group () {
-  local got_error group
-  if [ ! -z "$@" ]; then  
-  for group in $@ ; do
-    local uid_not_named="" uid_not_num=""
-    grep -v "$^" $gfile | awk -F: '{print $1}' | grep "^${group}$" >/dev/null 2>&1 || uid_not_named=yes  
-    grep -v "$^" $gfile | awk -F: '{print $3}' | grep "^${group}$" >/dev/null 2>&1 || uid_not_num=yes
-    if [ ! -z "$uid_not_named" -a ! -z "$uid_not_num" ]; then
-      echo "- Group '$group' does not exist"
-      got_error=yes
-    fi
-  done
-  fi
-  # Return exit code of 1 if at least one of the groups didn't exist
-  if [ ! -z "$got_error" ]; then
-    return 1
-  fi
-}   
-
-#: Read the login name for the new user :#
-#
-# Remember that most Mail Transfer Agents are case independant, so having
-# 'uSer' and 'user' may cause confusion/things to break.  Because of this,
-# useradd from shadow-4.0.3 no longer accepts usernames containing uppercase,
-# and we must reject them, too.
-
-# Set the login variable to the command line param
-echo
-LOGIN="$1"
-needinput=yes
-while [ ! -z $needinput ]; do
-  if [ -z "$LOGIN" ]; then 
-    while [ -z "$LOGIN" ]; do LOGIN="$(get_input "Login name for new user []:")" ; done
-  fi
-  grep "^${LOGIN}:" $pfile >/dev/null 2>&1  # ensure it's not already used
-  if [ $? -eq 0 ]; then
-    echo "- User '$LOGIN' already exists; please choose another"
-    unset LOGIN
-  elif [ ! -z "$( echo $LOGIN | grep "^[0-9]" )" ]; then
-    echo "- User names cannot begin with a number; please choose another"
-    unset LOGIN
-  elif [ ! "$LOGIN" = "`echo $LOGIN | tr A-Z a-z`" ]; then # useradd does not allow uppercase
-    echo "- User '$LOGIN' contains illegal characters (uppercase); please choose another"
-    unset LOGIN
-  elif [ ! -z "$( echo $LOGIN | grep '\.' )" ]; then
-    echo "- User '$LOGIN' contains illegal characters (period/dot); please choose another"
-    unset LOGIN
-  else
-    unset needinput
-  fi
-done
-
-# Display the user name passed from the shell if it hasn't changed
-if [ "$1" = "$LOGIN" ]; then
-  echo "Login name for new user: $LOGIN"
-fi
-
-#: Get the UID for the user & ensure it's not already in use :#
-#
-# Whilst we _can_ allow users with identical UIDs, it's not a 'good thing' because
-# when you change password for the uid, it finds the first match in /etc/passwd 
-# which isn't necessarily the correct user
-#
-echo
-needinput=yes
-while [ ! -z "$needinput" ]; do
-  _UID="$(get_input "User ID ('UID') [ defaults to next available ]:")"
-  grep -v "^$" $pfile | awk -F: '{print $3}' | grep "^${_UID}$" >/dev/null 2>&1
-  if [ $? -eq 0 ]; then
-    echo "- That UID is already in use; please choose another"
-  elif [ ! -z "$(echo $_UID | egrep '[A-Za-z]')" ]; then
-    echo "- UIDs are numerics only"         
-  else
-    unset needinput
-  fi
-done
-# If we were given a UID, then syntax up the variable to pass to useradd
-if [ ! -z "$_UID" ]; then 
-  U_ID="-u ${_UID}"
-else
-  # Will we be recycling UIDs?
-  if [ "$recycleuids" = "yes" ]; then
-    U_ID="-u $(awk -F: '{uid[$3]=1} END { for (i=ENVIRON["recycleUIDMIN"];i in uid;i++);print i}' $pfile)"
-  fi   
-fi
-
-#: Get the initial group for the user & ensure it exists :#
-#
-# We check /etc/group for both the text version and the group ID number 
-echo
-needinput=yes
-while [ ! -z "$needinput" ]; do
-  GID="$(get_input "Initial group [ ${defgroup} ]:")"
-  check_group "$GID"
-  if [ $? -gt 0 ]; then
-    echo "- Please choose another"
-  else
-    unset needinput 
-  fi
-done
-# Syntax the variable ready for useradd
-if [ -z "$GID" ]; then
-  GID="-g ${defgroup}"
-else
-  GID="-g ${GID}"
-fi
-
-#: Get additional groups for the user :#
-#
-echo
-needinput=yes
-while [ ! -z "$needinput" ]; do
-  AGID="$(get_input "Additional groups (comma separated) []:")"
-  AGID="$(echo "$AGID" | tr -d ' ' | tr , ' ')" # fix up for parsing 
-  if [ ! -z "$AGID" ]; then
-    check_group "$AGID"  # check all groups at once (treated as N # of params)
-    if [ $? -gt 0 ]; then
-      echo "- Please re-enter the group(s)"
-    else
-      unset needinput # we found all groups specified
-      AGID="-G $(echo "$AGID" | tr ' ' ,)"
-    fi
-  else
-    unset needinput   # we don't *have* to have additional groups
-  fi
-done
-
-#: Get the new user's home dir :#
-#       
-echo
-needinput=yes
-while [ ! -z "$needinput" ]; do
-  HME="$(get_input "Home directory [ ${defhome}/${LOGIN} ]")"
-  if [ -z "$HME" ]; then
-    HME="${defhome}/${LOGIN}"
-  fi 
-  # Warn the user if the home dir already exists
-  if [ -d "$HME" ]; then
-    echo "- Warning: '$HME' already exists !"
-    getyn="$(get_input "  Do you wish to change the home directory path ? (Y/n) ")"
-    if [ "$(echo $getyn | grep -i "n")" ]; then
-      unset needinput
-      # You're most likely going to only do this if you have the dir *mounted* for this user's $HOME
-      getyn="$(get_input "  Do you want to chown $LOGIN.$( echo $GID | awk '{print $2}') $HME ? (y/N) ")"
-      if [ "$(echo $getyn | grep -i "y")" ]; then
-         CHOWNHOMEDIR=$HME # set this to the home directory
-      fi
-    fi
-  else
-    unset needinput
-  fi
-done           
-HME="-d ${HME}"  
-    
-#: Get the new user's shell :#
-echo
-needinput=yes
-while [ ! -z "$needinput" ]; do
-  unset got_error
-  SHL="$(get_input "Shell [ ${defshell} ]")"
-  if [ -z "$SHL" ]; then
-    SHL="${defshell}"
-  fi 
-  # Warn the user if the shell doesn't exist in /etc/shells or as a file
-  if [ -z "$(grep "^${SHL}$" $sfile)" ]; then
-    echo "- Warning: ${SHL} is not in ${sfile} (potential problem using FTP)"
-    got_error=yes
-  fi
-  if [ ! -f "$SHL" ]; then
-    echo "- Warning: ${SHL} does not exist as a file"
-    got_error=yes
-  fi
-  if [ ! -z "$got_error" ]; then
-    getyn="$(get_input "  Do you wish to change the shell ? (Y/n) ")"
-    if [ "$(echo $getyn | grep -i "n")" ]; then
-      unset needinput
-    fi
-  else
-    unset needinput
-  fi
-done           
-SHL="-s ${SHL}"
-
-#: Get the expiry date :#
-echo
-needinput=yes
-while [ ! -z "$needinput" ]; do
-  EXP="$(get_input "Expiry date (YYYY-MM-DD) []:")"
-  if [ ! -z "$EXP" ]; then
-    # Check to see whether the expiry date is in the valid format
-    if [ -z "$(echo "$EXP" | grep "^[[:digit:]]\{4\}[-]\?[[:digit:]]\{2\}[-]\?[[:digit:]]\{2\}$")" ]; then
-      echo "- That is not a valid expiration date"
-    else
-      unset needinput 
-      EXP="-e ${EXP}" 
-    fi
-  else
-    unset needinput
-  fi
-done
-
-# Display the info about the new impending account
-echo
-echo "New account will be created as follows:"
-echo
-echo "---------------------------------------"
-display "Login name.......: " "$LOGIN"
-display "UID..............: " "$_UID" "[ Next available ]"
-display "Initial group....: " "$GID"
-display "Additional groups: " "$AGID" "[ None ]"
-display "Home directory...: " "$HME"
-display "Shell............: " "$SHL"
-display "Expiry date......: " "$EXP" "[ Never ]"
-echo
-
-echo "This is it... if you want to bail out, hit Control-C.  Otherwise, press"
-echo "ENTER to go ahead and make the account."
-read junk
-
-echo
-echo "Creating new account..."
-echo
-echo
-
-# Add the account to the system
-CMD="$useradd "$HME" -m "$EXP" "$U_ID" "$GID" "$AGID" "$SHL" "$LOGIN""
-$CMD
-
-if [ $? -gt 0 ]; then
-  echo "- Error running useradd command -- account not created!"
-  echo "(cmd: $CMD)"
-  exit 1
-fi
-
-# chown the home dir ?  We can only do this once the useradd has
-# completed otherwise the user name doesn't exist.
-if [ ! -z "${CHOWNHOMEDIR}" ]; then
-  chown "$LOGIN"."$( echo $GID | awk '{print $2}')" "${CHOWNHOMEDIR}"
-fi
-
-# Set the finger information
-$chfn "$LOGIN"
-if [ $? -gt 0 ]; then
-  echo "- Warning: an error occurred while setting finger information"
-fi
-
-# Set a password
-$passwd "$LOGIN"
-if [ $? -gt 0 ]; then
-  echo "* WARNING: An error occured while setting the password for"
-  echo "           this account.  Please manually investigate this *"
-  exit 1
-fi
-
-echo
-echo
-echo "Account setup complete."
-exit 0
-
diff --git a/testing/shadow/chgpasswd b/testing/shadow/chgpasswd
deleted file mode 100644
index 8f49f5cc8..000000000
--- a/testing/shadow/chgpasswd
+++ /dev/null
@@ -1,4 +0,0 @@
-#%PAM-1.0
-auth		sufficient	pam_rootok.so
-account		required	pam_permit.so
-password	include		system-auth
diff --git a/testing/shadow/chpasswd b/testing/shadow/chpasswd
deleted file mode 100644
index bc14857dc..000000000
--- a/testing/shadow/chpasswd
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth		sufficient	pam_rootok.so
-auth		required	pam_unix.so
-account		required	pam_unix.so
-session		required	pam_unix.so
-password 	required 	pam_unix.so md5 shadow
diff --git a/testing/shadow/defaults.pam b/testing/shadow/defaults.pam
deleted file mode 100644
index a7bf8a4a5..000000000
--- a/testing/shadow/defaults.pam
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth		sufficient	pam_rootok.so
-auth		required	pam_unix.so
-account		required	pam_unix.so
-session		required	pam_unix.so
-password	required	pam_permit.so
diff --git a/testing/shadow/login b/testing/shadow/login
deleted file mode 100644
index 51ff96a4a..000000000
--- a/testing/shadow/login
+++ /dev/null
@@ -1,20 +0,0 @@
-#%PAM-1.0
-auth		required	pam_securetty.so
-auth		requisite	pam_nologin.so
-auth		required	pam_unix.so nullok
-auth		required	pam_tally.so onerr=succeed file=/var/log/faillog
-# use this to lockout accounts for 10 minutes after 3 failed attempts
-#auth		required	pam_tally.so deny=2 unlock_time=600 onerr=succeed file=/var/log/faillog
-account		required	pam_access.so
-account		required	pam_time.so
-account		required	pam_unix.so
-#password	required	pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
-#password	required	pam_unix.so md5 shadow use_authtok
-session		required	pam_unix.so
-session		required	pam_env.so
-session		required	pam_motd.so
-session		required	pam_limits.so
-session		optional	pam_mail.so dir=/var/spool/mail standard
-session		optional	pam_lastlog.so
-session		optional	pam_loginuid.so
--session	optional	pam_ck_connector.so nox11
diff --git a/testing/shadow/login.defs b/testing/shadow/login.defs
deleted file mode 100644
index 2500ee447..000000000
--- a/testing/shadow/login.defs
+++ /dev/null
@@ -1,197 +0,0 @@
-#
-# /etc/login.defs - Configuration control definitions for the login package.
-#
-# Three items must be defined:  MAIL_DIR, ENV_SUPATH, and ENV_PATH.
-# If unspecified, some arbitrary (and possibly incorrect) value will
-# be assumed.  All other items are optional - if not specified then
-# the described action or option will be inhibited.
-#
-# Comment lines (lines beginning with "#") and blank lines are ignored.
-#
-# Modified for Linux.  --marekm
-
-#
-# Delay in seconds before being allowed another attempt after a login failure
-#
-FAIL_DELAY		3
-
-#
-# Enable display of unknown usernames when login failures are recorded.
-#
-LOG_UNKFAIL_ENAB	no
-
-#
-# Enable logging of successful logins
-#
-LOG_OK_LOGINS		no
-
-#
-# Enable "syslog" logging of su activity - in addition to sulog file logging.
-# SYSLOG_SG_ENAB does the same for newgrp and sg.
-#
-SYSLOG_SU_ENAB		yes
-SYSLOG_SG_ENAB		yes
-
-#
-# If defined, either full pathname of a file containing device names or
-# a ":" delimited list of device names.  Root logins will be allowed only
-# upon these devices.
-#
-CONSOLE		/etc/securetty
-#CONSOLE	console:tty01:tty02:tty03:tty04
-
-#
-# If defined, all su activity is logged to this file.
-#
-#SULOG_FILE	/var/log/sulog
-
-#
-# If defined, file which maps tty line to TERM environment parameter.
-# Each line of the file is in a format something like "vt100  tty01".
-#
-#TTYTYPE_FILE	/etc/ttytype
-
-#
-# If defined, the command name to display when running "su -".  For
-# example, if this is defined as "su" then a "ps" will display the
-# command is "-su".  If not defined, then "ps" would display the
-# name of the shell actually being run, e.g. something like "-sh".
-#
-SU_NAME		su
-
-#
-# *REQUIRED*
-#   Directory where mailboxes reside, _or_ name of file, relative to the
-#   home directory.  If you _do_ define both, MAIL_DIR takes precedence.
-#   QMAIL_DIR is for Qmail
-#
-#QMAIL_DIR	Maildir
-MAIL_DIR	/var/spool/mail
-
-#
-# If defined, file which inhibits all the usual chatter during the login
-# sequence.  If a full pathname, then hushed mode will be enabled if the
-# user's name or shell are found in the file.  If not a full pathname, then
-# hushed mode will be enabled if the file exists in the user's home directory.
-#
-HUSHLOGIN_FILE	.hushlogin
-#HUSHLOGIN_FILE	/etc/hushlogins
-
-#
-# *REQUIRED*  The default PATH settings, for superuser and normal users.
-#
-# (they are minimal, add the rest in the shell startup files)
-ENV_SUPATH	PATH=/sbin:/bin:/usr/sbin:/usr/bin
-ENV_PATH	PATH=/bin:/usr/bin
-
-#
-# Terminal permissions
-#
-#	TTYGROUP	Login tty will be assigned this group ownership.
-#	TTYPERM		Login tty will be set to this permission.
-#
-# If you have a "write" program which is "setgid" to a special group
-# which owns the terminals, define TTYGROUP to the group number and
-# TTYPERM to 0620.  Otherwise leave TTYGROUP commented out and assign
-# TTYPERM to either 622 or 600.
-#
-TTYGROUP	tty
-TTYPERM		0600
-
-#
-# Login configuration initializations:
-#
-#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
-#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
-#	UMASK		Default "umask" value.
-#
-# The ERASECHAR and KILLCHAR are used only on System V machines.
-# The ULIMIT is used only if the system supports it.
-# (now it works with setrlimit too; ulimit is in 512-byte units)
-#
-# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
-#
-ERASECHAR	0177
-KILLCHAR	025
-UMASK		077
-
-#
-# Password aging controls:
-#
-#	PASS_MAX_DAYS	Maximum number of days a password may be used.
-#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
-#	PASS_WARN_AGE	Number of days warning given before a password expires.
-#
-PASS_MAX_DAYS	99999
-PASS_MIN_DAYS	0
-PASS_WARN_AGE	7
-
-#
-# Min/max values for automatic uid selection in useradd
-#
-UID_MIN			 1000
-UID_MAX			60000
-# System accounts
-SYS_UID_MIN		  500
-SYS_UID_MAX		  999
-
-#
-# Min/max values for automatic gid selection in groupadd
-#
-GID_MIN			 1000
-GID_MAX			60000
-# System accounts
-SYS_GID_MIN		  500
-SYS_GID_MAX		  999
-
-#
-# Max number of login retries if password is bad
-#
-LOGIN_RETRIES		5
-
-#
-# Max time in seconds for login
-#
-LOGIN_TIMEOUT		60
-
-#
-# Which fields may be changed by regular users using chfn - use
-# any combination of letters "frwh" (full name, room number, work
-# phone, home phone).  If not defined, no changes are allowed.
-# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
-# 
-CHFN_RESTRICT		rwh
-
-#
-# List of groups to add to the user's supplementary group set
-# when logging in on the console (as determined by the CONSOLE
-# setting).  Default is none.
-#
-# Use with caution - it is possible for users to gain permanent
-# access to these groups, even when not logged in on the console.
-# How to do it is left as an exercise for the reader...
-#
-#CONSOLE_GROUPS		floppy:audio:cdrom
-
-#
-# Should login be allowed if we can't cd to the home directory?
-# Default in no.
-#
-DEFAULT_HOME	yes
-
-#
-# If defined, this command is run when removing a user.
-# It should remove any at/cron/print jobs etc. owned by
-# the user to be removed (passed as the first argument).
-#
-#USERDEL_CMD	/usr/sbin/userdel_local
-
-#
-# Enable setting of the umask group bits to be the same as owner bits
-# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
-# the same as gid, and username is the same as the primary group name.
-#
-# This also enables userdel to remove user groups if no members exist.
-#
-USERGROUPS_ENAB yes
-
diff --git a/testing/shadow/newusers b/testing/shadow/newusers
deleted file mode 100644
index bc14857dc..000000000
--- a/testing/shadow/newusers
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth		sufficient	pam_rootok.so
-auth		required	pam_unix.so
-account		required	pam_unix.so
-session		required	pam_unix.so
-password 	required 	pam_unix.so md5 shadow
diff --git a/testing/shadow/passwd b/testing/shadow/passwd
deleted file mode 100644
index 1ffd1bdd8..000000000
--- a/testing/shadow/passwd
+++ /dev/null
@@ -1,4 +0,0 @@
-#%PAM-1.0
-#password	required	pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
-#password	required	pam_unix.so md5 shadow use_authtok
-password	required	pam_unix.so md5 shadow nullok
diff --git a/testing/shadow/shadow-add-missing-include.patch b/testing/shadow/shadow-add-missing-include.patch
deleted file mode 100644
index 5c9e946ef..000000000
--- a/testing/shadow/shadow-add-missing-include.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Naur shadow-4.1.4.2+svn3283/libmisc/copydir.c shadow-4.1.4.2+svn3283.new/libmisc/copydir.c
---- shadow-4.1.4.2+svn3283/libmisc/copydir.c	2010-09-05 11:35:26.000000000 -0400
-+++ shadow-4.1.4.2+svn3283.new/libmisc/copydir.c	2011-06-26 01:26:52.000000000 -0400
-@@ -34,6 +34,7 @@
- 
- #ident "$Id: copydir.c 3283 2010-09-05 15:34:42Z nekral-guest $"
- 
-+#include <stdarg.h>
- #include <assert.h>
- #include <sys/stat.h>
- #include <sys/types.h>
diff --git a/testing/shadow/shadow-strncpy-usage.patch b/testing/shadow/shadow-strncpy-usage.patch
deleted file mode 100644
index 46df74ace..000000000
--- a/testing/shadow/shadow-strncpy-usage.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff -ur shadow-4.1.4.3.orig/src/login.c shadow-4.1.4.3/src/login.c
---- shadow-4.1.4.3.orig/src/login.c	2011-03-05 22:17:10.032524948 -0800
-+++ shadow-4.1.4.3/src/login.c	2011-03-05 22:17:59.154342059 -0800
-@@ -748,8 +748,9 @@
- 			          sizeof (loginprompt),
- 			          _("%s login: "), hostn);
- 		} else {
-+		        loginprompt[sizeof (loginprompt) - 1] = '\0';
- 			strncpy (loginprompt, _("login: "),
--			         sizeof (loginprompt));
-+			         sizeof (loginprompt) - 1);
- 		}
- 
- 		retcode = pam_set_item (pamh, PAM_USER_PROMPT, loginprompt);
-diff -ur shadow-4.1.4.3.orig/src/usermod.c shadow-4.1.4.3/src/usermod.c
---- shadow-4.1.4.3.orig/src/usermod.c	2011-03-05 22:17:10.029191265 -0800
-+++ shadow-4.1.4.3/src/usermod.c	2011-03-05 22:18:42.665576968 -0800
-@@ -182,7 +182,8 @@
- 	struct tm *tp;
- 
- 	if ((negativ != NULL) && (date < 0)) {
--		strncpy (buf, negativ, maxsize);
-+	        buf[maxsize - 1] = '\0';
-+		strncpy (buf, negativ, maxsize - 1);
- 	} else {
- 		time_t t = (time_t) date;
- 		tp = gmtime (&t);
diff --git a/testing/shadow/shadow.cron.daily b/testing/shadow/shadow.cron.daily
deleted file mode 100755
index 1931a793e..000000000
--- a/testing/shadow/shadow.cron.daily
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# Verify integrity of password and group files
-/usr/sbin/pwck -r
-/usr/sbin/grpck -r
-
diff --git a/testing/shadow/shadow.install b/testing/shadow/shadow.install
deleted file mode 100644
index c1bd1066b..000000000
--- a/testing/shadow/shadow.install
+++ /dev/null
@@ -1,8 +0,0 @@
-post_upgrade() {
-  grpck -r &>/dev/null
-  if [ $? -eq 2 ]; then
-    echo "Fixing gshadow file ..."
-    while :; do echo "y"; done | grpck &>/dev/null
-  fi
-  return 0
-}
diff --git a/testing/shadow/shadow_CVE-2011-0721.patch b/testing/shadow/shadow_CVE-2011-0721.patch
deleted file mode 100644
index eb9ad80a2..000000000
--- a/testing/shadow/shadow_CVE-2011-0721.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-Goal: Input sanitization for chfn and chsh
-
-Fixes: CVE-2011-0721
-
-Status wrt upstream: Already applied upstream (4.1.4.3)
-
---- a/src/chfn.c
-+++ b/src/chfn.c
-@@ -551,14 +551,14 @@
- static void check_fields (void)
- {
- 	int err;
--	err = valid_field (fullnm, ":,=");
-+	err = valid_field (fullnm, ":,=\n");
- 	if (err > 0) {
- 		fprintf (stderr, _("%s: name with non-ASCII characters: '%s'\n"), Prog, fullnm);
- 	} else if (err < 0) {
- 		fprintf (stderr, _("%s: invalid name: '%s'\n"), Prog, fullnm);
- 		fail_exit (E_NOPERM);
- 	}
--	err = valid_field (roomno, ":,=");
-+	err = valid_field (roomno, ":,=\n");
- 	if (err > 0) {
- 		fprintf (stderr, _("%s: room number with non-ASCII characters: '%s'\n"), Prog, roomno);
- 	} else if (err < 0) {
-@@ -566,17 +566,17 @@
- 		         Prog, roomno);
- 		fail_exit (E_NOPERM);
- 	}
--	if (valid_field (workph, ":,=") != 0) {
-+	if (valid_field (workph, ":,=\n") != 0) {
- 		fprintf (stderr, _("%s: invalid work phone: '%s'\n"),
- 		         Prog, workph);
- 		fail_exit (E_NOPERM);
- 	}
--	if (valid_field (homeph, ":,=") != 0) {
-+	if (valid_field (homeph, ":,=\n") != 0) {
- 		fprintf (stderr, _("%s: invalid home phone: '%s'\n"),
- 		         Prog, homeph);
- 		fail_exit (E_NOPERM);
- 	}
--	err = valid_field (slop, ":");
-+	err = valid_field (slop, ":\n");
- 	if (err > 0) {
- 		fprintf (stderr, _("%s: '%s' contains non-ASCII characters\n"), Prog, slop);
- 	} else if (err < 0) {
---- a/src/chsh.
-+++ b/src/chsh.c
-@@ -528,7 +528,7 @@
- 	 * users are restricted to using the shells in /etc/shells.
- 	 * The shell must be executable by the user.
- 	 */
--	if (valid_field (loginsh, ":,=") != 0) {
-+	if (valid_field (loginsh, ":,=\n") != 0) {
- 		fprintf (stderr, _("%s: Invalid entry: %s\n"), Prog, loginsh);
- 		fail_exit (1);
- 	}
diff --git a/testing/shadow/useradd.defaults b/testing/shadow/useradd.defaults
deleted file mode 100644
index b800b1777..000000000
--- a/testing/shadow/useradd.defaults
+++ /dev/null
@@ -1,9 +0,0 @@
-# useradd defaults file for ArchLinux
-# original changes by TomK
-GROUP=100
-HOME=/home
-INACTIVE=-1
-EXPIRE=
-SHELL=/bin/bash
-SKEL=/etc/skel
-CREATE_MAIL_SPOOL=no
diff --git a/testing/shadow/xstrdup.patch b/testing/shadow/xstrdup.patch
deleted file mode 100644
index bce434264..000000000
--- a/testing/shadow/xstrdup.patch
+++ /dev/null
@@ -1,9 +0,0 @@
---- shadow-4.1.2.1/libmisc/xmalloc.c	2008-08-30 21:55:44.000000000 -0500
-+++ shadow-4.1.2.1/libmisc/xmalloc.c.new	2008-08-30 21:55:36.000000000 -0500
-@@ -61,5 +61,6 @@
- 
- char *xstrdup (const char *str)
- {
-+	if(str == NULL) return NULL;
- 	return strcpy (xmalloc (strlen (str) + 1), str);
- }