diff options
Diffstat (limited to 'testing/mkinitcpio-nfs-utils/initcpio-install-net')
| -rw-r--r-- | testing/mkinitcpio-nfs-utils/initcpio-install-net | 107 |
1 files changed, 0 insertions, 107 deletions
diff --git a/testing/mkinitcpio-nfs-utils/initcpio-install-net b/testing/mkinitcpio-nfs-utils/initcpio-install-net deleted file mode 100644 index 7030e2d64..000000000 --- a/testing/mkinitcpio-nfs-utils/initcpio-install-net +++ /dev/null @@ -1,107 +0,0 @@ -#!/bin/bash - -build() { - add_checked_modules '/drivers/net/' - - add_binary "/usr/lib/initcpio/ipconfig" "/bin/ipconfig" - add_binary "/usr/lib/initcpio/nfsmount" "/bin/nfsmount" - - add_runscript -} - -help() { - cat <<HELPEOF -This hook loads the necessary modules for a network device. -Detection will take place at runtime. To minimize the modules -in the image, add the autodetect hook too. -For pcmcia net devices please use pcmcia hook too. - -Kernel Parameters: -An interface spec can be either short form, which is just the name of -an interface (eth0 or whatever), or long form. The long form consists -of up to seven elements, separated by colons: - -ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf> -nfsaddrs= is an alias to ip= and can be used too. - -<client-ip> IP address of the client. If empty, the address will - either be determined by RARP/BOOTP/DHCP. What protocol - is used de- pends on the <autoconf> parameter. If this - parameter is not empty, autoconf will be used. - -<server-ip> IP address of the NFS server. If RARP is used to - determine the client address and this parameter is NOT - empty only replies from the specified server are - accepted. To use different RARP and NFS server, - specify your RARP server here (or leave it blank), and - specify your NFS server in the 'nfsroot' parameter - (see above). If this entry is blank the address of the - server is used which answered the RARP/BOOTP/DHCP - request. - -<gw-ip> IP address of a gateway if the server is on a different - subnet. If this entry is empty no gateway is used and the - server is assumed to be on the local network, unless a - value has been received by BOOTP/DHCP. - -<netmask> Netmask for local network interface. If this is empty, - the netmask is derived from the client IP address assuming - classful addressing, unless overridden in BOOTP/DHCP reply. - -<hostname> Name of the client. If empty, the client IP address is - used in ASCII notation, or the value received by - BOOTP/DHCP. - -<device> Name of network device to use. If this is empty, all - devices are used for RARP/BOOTP/DHCP requests, and the - first one we receive a reply on is configured. If you - have only one device, you can safely leave this blank. - -<autoconf> Method to use for autoconfiguration. If this is either - 'rarp', 'bootp', or 'dhcp' the specified protocol is - used. If the value is 'both', 'all' or empty, all - protocols are used. 'off', 'static' or 'none' means - no autoconfiguration. -Examples: -ip=127.0.0.1:::::lo:none --> Enable the loopback interface. -ip=192.168.1.1:::::eth2:none --> Enable static eth2 interface. -ip=:::::eth0:dhcp --> Enable dhcp protcol for eth0 configuration. - -nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>] - -If the 'nfsroot' parameter is NOT given on the command line, the default -"/tftpboot/%s" will be used. - -<server-ip> Specifies the IP address of the NFS server. If this field - is not given, the default address as determined by the - 'ip' variable (see below) is used. One use of this - parameter is for example to allow using different servers - for RARP and NFS. Usually you can leave this blank. - -<root-dir> Name of the directory on the server to mount as root. If - there is a "%s" token in the string, the token will be - replaced by the ASCII-representation of the client's IP - address. - -<nfs-options> Standard NFS options. All options are separated by commas. - If the options field is not given, the following defaults - will be used: - port = as given by server portmap daemon - rsize = 1024 - wsize = 1024 - timeo = 7 - retrans = 3 - acregmin = 3 - acregmax = 60 - acdirmin = 30 - acdirmax = 60 - flags = hard, nointr, noposix, cto, ac - -root=/dev/nfs - -If you don't use nfsroot= parameter you need to set root=/dev/nfs -to boot from a nfs root by autoconfiguration. -HELPEOF -} - -# vim: set ft=sh ts=4 sw=4 et: |