diff options
author | Tom Gundersen <teg@jklm.no> | 2011-12-31 01:59:59 +0100 |
---|---|---|
committer | Tom Gundersen <teg@jklm.no> | 2011-12-31 02:09:51 +0100 |
commit | 2b61b73f1768af155b817fa760fe5fe54aab1095 (patch) | |
tree | 156090bb065a904ef081f1710b3ccec3174cbfac /rc.conf.5.txt | |
parent | d129fef076e6dd4ba1b12717880cfa4f4f6ef1bf (diff) |
man: minor fixes and typesetting
This attempts to unify the look of the man pages.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Diffstat (limited to 'rc.conf.5.txt')
-rw-r--r-- | rc.conf.5.txt | 271 |
1 files changed, 143 insertions, 128 deletions
diff --git a/rc.conf.5.txt b/rc.conf.5.txt index d27d542..1d331ef 100644 --- a/rc.conf.5.txt +++ b/rc.conf.5.txt @@ -4,219 +4,234 @@ vim:set ts=4 sw=4 syntax=asciidoc noet: rc.conf(5) ========== -Name +NAME ---- rc.conf - Arch Linux main configuration file -Synopsis +SYNOPSIS -------- -*/etc/rc.conf* +/etc/rc.conf -Description +DESCRIPTION ----------- -The */etc/rc.conf* file is the system configuration file for Arch-specific +The /etc/rc.conf file is the system configuration file for Arch-specific settings. The format is bash. It contains several commonly-edited settings such as timezone; keymap; kernel modules; daemons to load at start-up; etc. It is split up in a few sections to categorize configuration settings: localization, hardware, networking and daemons. -Localization[[L]] +LOCALIZATION[[L]] ----------------- -*TIMEZONE*:: - Specifies the timezone. The setting takes effect on boot by ensuring that /etc/localtime is a symlink - to the correct zoneinfo file. Possible timezones are the relative path to a zoneinfo file starting - from the directory /usr/share/zoneinfo. For example, a German timezone would be Europe/Berlin, - which refers to the file /usr/share/zoneinfo/Europe/Berlin. +*TIMEZONE=* - Note: if empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually - or by a third-party tool; or if there is no reason to change it from what was set during install. +Specifies the timezone. The setting takes effect on boot by ensuring that /etc/localtime is a symlink +to the correct zoneinfo file. Possible timezones are the relative path to a zoneinfo file starting +from the directory /usr/share/zoneinfo. For example, a German timezone would be Europe/Berlin, +which refers to the file /usr/share/zoneinfo/Europe/Berlin. - Default: empty +Note: if empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually +or by a third-party tool; or if there is no reason to change it from what was set during install. -*HARDWARECLOCK*:: - How to interpret/update the hardware clock. (used by hwclock) - Options: - - empty: fall back to the value in /var/lib/hwclock/adjfile, which defaults to UTC. This is recommended - as other users of hwclock might change adjfile and hence cause rc.conf and adjfile to be out of sync. - - "UTC": most robust, allows operating systems to abstract local time and ease DST. - - "localtime": apply timezone (and DST) in hardwareclock: discouraged. - Choose this if you dualboot with an OS which cannot handle UTC BIOS times correctly, like Windows (note - that recent Windows'es can use UTC, which is preferable). - - any other value will result in the hardware clock being left untouched (useful for virtualization) +Default: empty - Default: empty +*HARDWARECLOCK=* -*KEYMAP*:: - Defines the keymap to load with the loadkeys program on bootup. - Possible keymaps are found in /usr/share/kbd/keymaps. Please note that this - setting is only valid for your TTYs, not any graphical window managers or X. - KEYMAP in /etc/vconsole.conf takes precedence. +How to interpret/update the hardware clock. (used by hwclock) - Defalut: empty +Options: + - empty: fall back to the value in /var/lib/hwclock/adjfile, which defaults to UTC. This is recommended + as other users of hwclock might change adjfile and hence cause rc.conf and adjfile to be out of sync. + - "UTC": most robust, allows operating systems to abstract local time and ease DST. + - "localtime": apply timezone (and DST) in hardwareclock: discouraged. + Choose this if you dualboot with an OS which cannot handle UTC BIOS times correctly, like Windows (note + that recent Windows'es can use UTC, which is preferable). + - any other value will result in the hardware clock being left untouched (useful for virtualization) -*CONSOLEFONT*:: - Defines the console font to load with the setfont program on bootup. - Possible fonts are found in /usr/share/kbd/consolefonts (only needed for non-US). - FONT in /etc/vconsole.conf takes precedence. +Default: empty - Default: empty +*KEYMAP=* -*CONSOLEMAP*:: - Defines the console map to load with the setfont program on bootup. Possible maps are found in - /usr/share/kbd/consoletrans. Set this to a map suitable for the appropriate locale (8859-1 for Latin1, - for example) if you're using an UTF-8 locale and use programs that generate 8-bit output. If you're - using X11 for everyday work, don't bother, as it only affects the output of Linux console applications. - FONT_MAP in /etc/vconsole.conf takes precedence. +Defines the keymap to load with the loadkeys program on bootup. +Possible keymaps are found in /usr/share/kbd/keymaps. Please note that this +setting is only valid for your TTYs, not any graphical window managers or X. +KEYMAP in /etc/vconsole.conf takes precedence. - Default: empty +Defalut: empty -*LOCALE*:: - This sets your system language, which will be used by all i18n-friendly applications and utilities. - See `locale -a` (or locale.gen) for available options. LANG in /etc/locale.conf takes precedence. - If unset, it falls back to the C locale. +*CONSOLEFONT=* - Default: empty +Defines the console font to load with the setfont program on bootup. +Possible fonts are found in /usr/share/kbd/consolefonts (only needed for non-US). +FONT in /etc/vconsole.conf takes precedence. -*DAEMON_LOCALE*:: - If set to 'yes', use $LOCALE as the locale during daemon startup and during the boot process. - If set to 'no', the C locale is used. +Default: empty - Default: "no" +*CONSOLEMAP=* -*USECOLOR*:: - Use ANSI color sequences in startup messages +Defines the console map to load with the setfont program on bootup. Possible maps are found in +/usr/share/kbd/consoletrans. Set this to a map suitable for the appropriate locale (8859-1 for Latin1, +for example) if you're using an UTF-8 locale and use programs that generate 8-bit output. If you're +using X11 for everyday work, don't bother, as it only affects the output of Linux console applications. +FONT_MAP in /etc/vconsole.conf takes precedence. - Default: "yes" +Default: empty -Hardware[[H]] +*LOCALE=* + +This sets your system language, which will be used by all i18n-friendly applications and utilities. +See `locale -a` (or locale.gen) for available options. LANG in /etc/locale.conf takes precedence. +If unset, it falls back to the C locale. + +Default: empty + +*DAEMON_LOCALE=* + + - If set to 'yes', use $LOCALE as the locale during daemon startup and during the boot process. + - If set to 'no', the C locale is used. + +Default: "no" + +*USECOLOR=* + +Use ANSI color sequences in startup messages + +Default: "yes" + +HARDWARE[[H]] ------------- +*MODULES=* + +Modules to load at boot-up. To blacklist modules, see "man modprobe.conf". + +Default: (). + +*UDEV_TIMEOUT=* -*MODULES*:: - Modules to load at boot-up. To blacklist modules, see "man modprobe.conf". +Udev settle timeout. - Default: (). +Default: 30 -*UDEV_TIMEOUT*:: - Udev settle timeout. +*USEDMRAID=* - Default: 30 +Scan for FakeRAID (dmraid) Volumes at startup. -*USEDMRAID*:: - Scan for FakeRAID (dmraid) Volumes at startup. +Default: "no" - Default: "no" +*USEBTRFS=* -*USEBTRFS*:: - Scan for BTRFS volumes at startup. +Scan for BTRFS volumes at startup. - Default: "no" +Default: "no" -*USELVM*:: - Scan for LVM volume groups at startup, required if you use LVM. +*USELVM=* - Default: "no" +Scan for LVM volume groups at startup, required if you use LVM. -Networking[[N]] +Default: "no" + +NETWORKING[[N]] --------------- +*HOSTNAME=* -*HOSTNAME*:: - Hostname of machine. Should also be put in /etc/hosts. The contents of - /etc/hostname (if not empty) takes precedence. +Hostname of machine. Should also be put in /etc/hosts. The contents of +/etc/hostname (if not empty) takes precedence. - Default: "myhost" +Default: "myhost" The following settings help you setting up a wired network. -*interface*:: - Name of device. Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces. +*interface=* - Default: empty +Name of device. Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces. - Required for manual configuration as well as DHCP. +Default: empty -*address*:: - IP address. +Required for manual configuration as well as DHCP. - Default: empty +*address=* - Required for manual configuration, empty for DHCP. +IP address. -*netmask*:: - Subnet mask. +Default: empty - Default: empty (which means 255.255.255.0) +Required for manual configuration, empty for DHCP. - Optional for manual configuration, ignored for DHCP. +*netmask=* -*broadcast*:: - Broadcast address. +Subnet mask. - Default: empty +Default: empty (which means 255.255.255.0) - Optional for manual configuration, ignored for DHCP. +Optional for manual configuration, ignored for DHCP. -*gateway*:: - Default route. +*broadcast=* - Default: empty +Broadcast address. - Required for manual configuration, ignored for DHCP. +Default: empty -*Static IP example*:: +Optional for manual configuration, ignored for DHCP. - interface=eth0 +*gateway=* - address=192.168.0.2 +Default route. - netmask=255.255.255.0 +Default: empty - broadcast=192.168.0.255 +Required for manual configuration, ignored for DHCP. +*Static IP example* + + interface=eth0 + address=192.168.0.2 + netmask=255.255.255.0 + broadcast=192.168.0.255 gateway=192.168.0.1 -*DHCP example*:: +*DHCP example* interface=eth0 - address= - netmask= - gateway= The following options might be needed for advanced use-cases. -*NETWORK_PERSIST*:: - Setting this to "yes" will skip network shutdown. This is required if your root device is on NFS. +*NETWORK_PERSIST=* + +Setting this to "yes" will skip network shutdown. This is required if your root device is on NFS. - Default: "no" +Default: "no" -*NETWORKS*:: - Enable these netcfg profiles at boot-up. These replace the network - configuration above and are useful if you happen to need more advanced - network features than the simple network service supports, - such as multiple network configurations (ie, laptop users). +*NETWORKS=* + +Enable these netcfg profiles at boot-up. These replace the network +configuration above and are useful if you happen to need more advanced +network features than the simple network service supports, +such as multiple network configurations (ie, laptop users). - set to 'menu' to present a menu during boot-up (dialog package required) - prefix an entry with a ! to disable it - Network profiles are found in /etc/network.d - There is a template file included there that can be used to create - new profiles. This requires the netcfg package -Daemons[[D]] +Network profiles are found in /etc/network.d +There is a template file included there that can be used to create +new profiles. This requires the netcfg package. + +DAEMONS[[D]] ------------ -*DAEMONS*:: - Daemons to start at boot-up (in this order) - - prefix a daemon with a ! to disable it - - prefix a daemon with a @ to start it up in the background +*DAEMONS=* + +Daemons to start at boot-up (in this order) + - prefix a daemon with a ! to disable it + - prefix a daemon with a @ to start it up in the background - If you are sure nothing else touches your hardware clock (such as ntpd or - a dual-boot), you might want to enable 'hwclock'. Note that this will only - make a difference if the hwclock program has been calibrated correctly. +If you are sure nothing else touches your hardware clock (such as ntpd or +a dual-boot), you might want to enable 'hwclock'. Note that this will only +make a difference if the hwclock program has been calibrated correctly. - If you use a network filesystem you should enable 'netfs'. +If you use a network filesystem you should enable 'netfs'. - Default: (syslog-ng network crond) +Default: (syslog-ng network crond) -Authors +AUTHORS ------- - Written by Dieter Plaetinck, Tom Gundersen and others. +Written by Dieter Plaetinck, Tom Gundersen and others. |