diff options
author | Tom Gundersen <teg@jklm.no> | 2012-07-19 22:14:55 +0200 |
---|---|---|
committer | Tom Gundersen <teg@jklm.no> | 2012-07-19 22:14:55 +0200 |
commit | 8c66baed0a803fe9983525847e03bf10aa66ac5f (patch) | |
tree | f55109e112b372922325ccf4b21d67e24f65bea8 /rc.conf.5.txt | |
parent | 8d55d6d8684c3b40b7bb4605aa5a0a6d5b282ec9 (diff) |
man: spruce up rc.conf manpage a bit
Signed-off-by: Tom Gundersen <teg@jklm.no>
Diffstat (limited to 'rc.conf.5.txt')
-rw-r--r-- | rc.conf.5.txt | 115 |
1 files changed, 60 insertions, 55 deletions
diff --git a/rc.conf.5.txt b/rc.conf.5.txt index 85a1551..601d9e3 100644 --- a/rc.conf.5.txt +++ b/rc.conf.5.txt @@ -20,6 +20,23 @@ as time zone, keymap, kernel modules, daemons to load at start-up, etc. It is split up in a few sections to categorize configuration settings: localization, hardware, networking, and daemons. +DAEMONS[[D]] +------------ +*DAEMONS=* + +Daemons to start at boot-up (in this order) + + - prefix a daemon with a ! to disable it + - prefix a daemon with a @ to start it up in the background + +If you are sure nothing else touches your hardware clock (such as ntpd or +by dual-booting), you might want to enable 'hwclock'. Note that this will only +make a difference if the hwclock program has been calibrated correctly. + +If you use a network filesystem, you should enable 'netfs'. + + DAEMONS=('syslog-ng' 'network' 'crond') + LOCALIZATION[[L]] ----------------- *TIMEZONE=* @@ -29,25 +46,30 @@ to the correct zoneinfo file. Possible time zones are the relative path to a zon from the directory /usr/share/zoneinfo. For example, a German time zone would be Europe/Berlin, which refers to the file /usr/share/zoneinfo/Europe/Berlin. -Note: If empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually -or by a third-party tool, or if there is no reason to change it from what was set during install. +It is recommended to leave this unset, and rather update maintain the /etc/localtime symlink manually, +or via third party tools. The reason for this is to avoid the symlink and the TIMEZONE variable to +be out of sync, as they are only synchronized at boot. Also, most third-party applications that could +maintain /etc/localtime do not know to also write to /etc/rc.conf. -Default: empty (recommended) + TIMEZONE="Europe/Berlin" *HARDWARECLOCK=* -How to interpret/update the hardware clock. (used by hwclock) +How to interpret/update the hardware clock. Options: - - empty: fall back to the value in /etc/adjtime, which defaults to UTC. This is recommended - as other users of hwclock might change the adjtime file and hence cause rc.conf and adjtime to be out of sync. + - empty: fall back to the value in /etc/adjtime, which defaults to UTC. - "UTC": allows the operating systems to abstract away local time and ease DST. - "localtime": apply time zone (and DST) in hardwareclock: strongly discouraged. Choose this if you dual-boot with an OS which cannot handle UTC BIOS times correctly, like Windows (note that recent Windows versions can use UTC, which is preferable). -Default: empty (recommended) +It is strongly recommended to leave this unset, and rather maintain /etc/adjtime (see hwclock(8)). The reason for +this is that calls to hwclock outside of initscripts are not aware of the HARDWARECLOCK variable and will always +use /etc/adjtime. These two configuration sources being out-of-sync is a common source of timezone problems. + + HARDWARECLOCK="UTC" *KEYMAP=* @@ -55,18 +77,18 @@ Defines the keymap to load with the loadkeys program on boot. Possible keymaps a found in /usr/share/kbd/keymaps. Please note that this setting is only valid for your TTYs, not any graphical window managers or X. -KEYMAP in /etc/vconsole.conf takes precedence. +KEYMAP in /etc/vconsole.conf takes precedence (see vconsole.conf(5)), and is recommended. -Default: empty (recommended, see vconsole.conf(5)) + KEYMAP="no-latin1" *CONSOLEFONT=* Defines the console font to load with the setfont program on boot. Possible fonts are found in /usr/share/kbd/consolefonts (only needed for non-US). -FONT in /etc/vconsole.conf takes precedence. +FONT in /etc/vconsole.conf takes precedence (see vconsole.conf(5)), and is recommended. -Default: empty (recommended, see vconsole.conf(5)) + CONSOLEFONT="LatArCyrHeb-16" *CONSOLEMAP=* @@ -75,39 +97,45 @@ Defines the console map to load with the setfont program on boot. Possible maps for example) if you're using an UTF-8 locale and use programs that generate 8-bit output. If you're using X11 for everyday work, don't bother, as it only affects the output of Linux console applications. -FONT_MAP in /etc/vconsole.conf takes precedence. +FONT_MAP in /etc/vconsole.conf takes precedence (see vconsole.conf(5)), and is recommended. -Default: empty (recommended, see vconsole.conf(5)) + CONSOLEMAP="8859-1" *LOCALE=* This sets your system language, which will be used by all i18n-friendly applications and utilities. See `locale -a` (or locale.gen) for available options. -LANG in /etc/locale.conf takes precedence. If unset, it falls back to the C locale. +LANG in /etc/locale.conf takes precedence (see locale.conf(5)), and is recommended. + +If unset, it falls back to the C locale. -Default: empty (recommended, see locale.conf(5)) + LOCALE="en_US.UTF-8" *DAEMON_LOCALE=* - If set to 'no', export the C locale to daemons and during the boot process. - Otherwise, export LANG (or LOCALE) as configured in /etc/locale.conf (or /etc/rc.conf). -Default: 'yes' (empty recommended) +Leave this unset, unless you have a specific reason to set it to 'no'. + + DAEMON_LOCALE="yes" *USECOLOR=* Use ANSI color sequences in start-up messages, unless set to 'no'. -Default: 'yes' (empty recommended) + DAEMON_LOCALE="yes" HARDWARE[[H]] ------------- *MODULES=* -Modules to load at boot-up. To blacklist modules, see 'man 5 modprobe.d'. +Modules to load at boot-up. To blacklist modules, see modprobe.d(5). + +Configuration files in /etc/modules-load.d/ are recommended instead (see modules-load.d(5)). -Default: empty (recommended, see modules-load.d(5)) + MODULES=('kvm') *USEDMRAID=* @@ -115,27 +143,33 @@ Scan for FakeRAID (dmraid) volumes at start-up. Default: 'no' + USEDMRAID="yes" + *USEBTRFS=* Scan for Btrfs volumes at start-up. Default: 'no' + USEBTRFS="yes" + *USELVM=* Scan for LVM volume groups at start-up. This is required if you use LVM. Default: 'no' + USELVM="yes" + NETWORKING[[N]] --------------- *HOSTNAME=* -Hostname of machine. Should also be put in /etc/hosts, unless nss-myhostname is used. +Hostname of machine. Unless nss-myhostname is used, this should also be set in /etc/hosts. -The contents of /etc/hostname (if not empty) takes precedence. +The contents of /etc/hostname (if not empty) takes precedence (see hostname(5)), and is recommended. -Default: empty (recommended, see hostname(5)) + HOSTNAME="arch1" The following settings help you setting up a wired network. @@ -143,40 +177,30 @@ The following settings help you setting up a wired network. Name of device. Use `ip addr` or `ls /sys/class/net/` to see all available interfaces. -Default: empty - -Required for manual configuration. +Required for manual configuration. If using DHCP, it can be left unset, see dhcpcd(5) for details. *address=* IP address. -Default: empty - -Required for manual configuration, empty for DHCP. +Required for manual configuration. If left empty, DHCP will be used. *netmask=* Subnet mask. -Default: empty (which means 255.255.255.0) - -Optional for manual configuration, ignored for DHCP. +Defaults to 255.255.255.0. Ignored when using DHCP. *broadcast=* Broadcast address. -Default: empty - Optional for manual configuration, ignored for DHCP. *gateway=* Default route. -Default: empty - Required for manual configuration, ignored for DHCP. *Static IP example* @@ -202,26 +226,7 @@ Setting this to "yes" will skip network shutdown. This is required if your root Default: 'no' -*NETWORKS=* - -This functionality is deprecated; please refer to netcfg(8). - -DAEMONS[[D]] ------------- -*DAEMONS=* - -Daemons to start at boot-up (in this order) - - - prefix a daemon with a ! to disable it - - prefix a daemon with a @ to start it up in the background - -If you are sure nothing else touches your hardware clock (such as ntpd or -by dual-booting), you might want to enable 'hwclock'. Note that this will only -make a difference if the hwclock program has been calibrated correctly. - -If you use a network filesystem, you should enable 'netfs'. - -Default: (syslog-ng network crond) + NETWORK_PERSIST="yes" SEE ALSO -------- |