linux-libre-aufs_friendly-3.3.4-1.2: updating revision

1 files changed, 65 insertions, 40 deletions

diff --git a/kernels/linux-libre-aufs_friendly/PKGBUILD b/kernels/linux-libre-aufs_friendly/PKGBUILD
index f02fe9a0b..4605cfba5 100644
--- a/kernels/linux-libre-aufs_friendly/PKGBUILD
+++ b/kernels/linux-libre-aufs_friendly/PKGBUILD
@@ -8,15 +8,13 @@
 # Maintainer (Parabola): Michał Masłowski <mtjm@mtjm.eu>
 # Maintainer (Parabola): Márcio Silva <coadde@lavabit.com>
 
-pkgbase=linux-libre-aufs_friendly
-pkgname=('linux-libre-aufs_friendly' 'linux-libre-aufs_friendly-headers') # Build stock -LIBRE kernel with AUFS-libre support
-# pkgname=linux-custom       # Build kernel with a different name
-_kernelname=-LIBRE-AUFS_FRIENDLY
+pkgbase=linux-libre-aufs_friendly # Build stock -LIBRE-AUFS_FRIENDLY kernel
+#pkgbase=linux-libre-custom # Build kernel with a different name
 _basekernel=3.3
 _sublevel=4
 pkgver=${_basekernel}.${_sublevel}
+pkgrel=1.2
 _lxopkgver=${_basekernel}.4 # nearly always the same as pkgver
-pkgrel=1.1
 arch=('i686' 'x86_64' 'mips64el')
 url="http://linux-libre.fsfla.org/"
 license=('GPL2')
@@ -29,14 +27,17 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gn
         # patches exporting symbols for the aufs module (reason for this package)
         'aufs3-libre-base.patch' 'aufs3-libre-standalone.patch'
         # standard config files for mkinitcpio ramdisk
-        "${pkgname}.preset"
+        "${pkgbase}.preset"
         'Kbuild'
         'Kbuild.platforms'
         'boot-logo.patch'
         'change-default-console-loglevel.patch'
         'i915-fix-ghost-tv-output.patch'
         'ext4-options.patch'
-        "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.bz2")
+        "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.bz2")
+
+_kernelname=${pkgbase#linux-libre}
+_localversionname=-LIBRE-AUFS_FRIENDLY
 md5sums=('5487da14ca81715a469c7594d39722fa'
          'ce7d959667b9f158b1fb814b5806950a'
          '9824d09d2a659db17a6468e27ccc29ad'
@@ -107,7 +108,7 @@ build() {
     sed -ri -e "s|CONFIG_MIPS32_N32=.*|CONFIG_MIPS32_N32=y|g" \
         -e "s|CONFIG_MIPS32_N32=.*|CONFIG_MIPS32_N32=y|g" \
         -e "s|CONFIG_UEVENT_HELPER_PATH=.*|CONFIG_UEVENT_HELPER_PATH=\"\"|g" \
-        -e "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" \
+        -e "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" \
         -e "s;(CONFIG_USB(_COMMON|_EHCI_HCD|_OHCI_HCD|_STORAGE.*|_UAS)?)=.*;\1=y;g" \
         ./.config
   else
@@ -115,7 +116,8 @@ build() {
   fi
 
   if [ "${_kernelname}" != "" ]; then
-    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
+    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config
+    sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
   fi
 
   # set extraversion to pkgrel
@@ -135,15 +137,22 @@ build() {
   #make oldconfig # using old config from previous kernel version
   # ... or manually edit .config
 
+  # rewrite configuration
+  yes "" | make config >/dev/null
+
+  # save configuration for later reuse
+  if [ "${CARCH}" = "x86_64" ]; then
+    cat .config > "${startdir}/config.x86_64.last"
+  else
+    cat .config > "${startdir}/config.i686.last"
+  fi
+
   ####################
   # stop here
   # this is useful to configure the kernel
-  #msg "Stopping build"
-  #return 1
+  #msg "Stopping build"; return 1
   ####################
 
-  yes "" | make config
-
   # build!
   if [ "$CARCH" == "mips64el" ]; then
     # The build system passes it directly to linker, disable to avoid
@@ -151,21 +160,22 @@ build() {
     export LDFLAGS=""
     # bzImage is arch-specific and not supported on mips; vmlinux is
     # useful for oprofile.
-    make ${MAKEFLAGS} vmlinux vmlinuz modules
+    make ${MAKEFLAGS} LOCALVERSION= vmlinux vmlinuz modules
   else
-    make ${MAKEFLAGS} bzImage modules
+    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
   fi
 }
 
-package_linux-libre-aufs_friendly() {
-  pkgdesc="The Linux-libre Kernel and modules, with symbols exported for AUFS3-libre"
+_package() {
+  pkgdesc="The ${pkgbase} kernel and modules with symbols exported for aufs3"
+  [ "${pkgbase}" = "linux-libre" ] && groups=('base')
   depends=('coreutils' 'kmod')
   optdepends=('crda: to set the correct wireless channels of your country')
-  provides=('kernel26-aufs_friendly' "linux-aufs_friendly=$pkgver")
-  conflicts=('kernel26-aufs_friendly' 'kernel26-libre-aufs_friendly' 'linux-aufs_friendly')
-  replaces=('kernel26-aufs_friendly' 'kernel26-libre-aufs_friendly' 'linux-aufs_friendly')
-  backup=("etc/mkinitcpio.d/${pkgname}.preset")
-  install=${pkgname}.install
+  provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}")
+  conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}")
+  replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}")
+  backup=("etc/mkinitcpio.d/${pkgbase}.preset")
+  install=${pkgbase}.install
   if [ "$CARCH" = "mips64el" ]; then
       optdepends+=('mkinitcpio: to make the initramfs (needs reinstall of this package)')
       conflicts+=('mkinitcpio<0.7')
@@ -179,35 +189,42 @@ package_linux-libre-aufs_friendly() {
   [ $CARCH = "mips64el" ] && KARCH=mips
 
   # get kernel version
-  _kernver="$(make kernelrelease)"
+  _kernver="$(make LOCALVERSION= kernelrelease)"
+  _basekernel=${_kernver%%-*}
+  _basekernel=${_basekernel%.*}
 
   mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
-  make INSTALL_MOD_PATH="${pkgdir}" modules_install
+  make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
 
   if [ "$CARCH" == "mips64el" ]; then
-    cp vmlinuz "${pkgdir}/boot/vmlinuz-${pkgname}"
-    cp vmlinux "${pkgdir}/boot/vmlinux-${pkgname}"
+    cp vmlinuz "${pkgdir}/boot/vmlinuz-${pkgbase}"
+    cp vmlinux "${pkgdir}/boot/vmlinux-${pkgbase}"
   else
-    cp "arch/${KARCH}/boot/bzImage" "${pkgdir}/boot/vmlinuz-${pkgname}"
+    cp "arch/${KARCH}/boot/bzImage" "${pkgdir}/boot/vmlinuz-${pkgbase}"
   fi
 
   # add vmlinux
   install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
 
   # install fallback mkinitcpio.conf file and preset file for kernel
-  install -D -m644 "${srcdir}/${pkgname}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
+  install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
 
   # set correct depmod command for install
   sed \
-    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgname}\"|g" \
-    -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgname}.img\"|g" \
-    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgname}-fallback.img\"|g" \
-    -i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
+    -e  "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
+    -e  "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
+    -i "${startdir}/${pkgbase}.install"
+  sed \
+    -e "1s|'linux*.*'|'${pkgbase}'|" \
+    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
+    -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
+    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
+    -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
 
 # mkinitcpio 0.7 relies on bzImage to find the kernel version
   if [ "$CARCH" == "mips64el" ]; then
-    sed -e "s|ALL_kver=.*|ALL_kver=\"${_kernver}\"|g" \
-        -i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
+    sed -e "s|ALL_kver=.*|ALL_kver=\"${_kernver}\"|" \
+        -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
   fi
 
   # remove build and source links
@@ -229,11 +246,11 @@ package_linux-libre-aufs_friendly() {
   depmod -b "$pkgdir" -F System.map "$_kernver"
 }
 
-package_linux-libre-aufs_friendly-headers() {
-  pkgdesc="Header files and scripts for building modules for linux-libre-aufs_friendly kernel"
-  provides=('kernel26-aufs_friendly-headers' "linux-aufs_friendly-headers=${pkgver}")
-  conflicts=('kernel26-aufs_friendly-headers' 'kernel26-libre-aufs_friendly-headers' 'linux-aufs_friendly-headers')
-  replaces=('kernel26-aufs_friendly-headers' 'kernel26-libre-aufs_friendly-headers' 'linux-aufs_friendly-headers')
+_package-headers() {
+  pkgdesc="Header files and scripts for building modules for ${pkgbase} kernel"
+  provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}")
+  conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers")
+  replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers")
 
   KARCH=x86
   [ $CARCH = "mips64el" ] && KARCH=mips
@@ -241,7 +258,7 @@ package_linux-libre-aufs_friendly-headers() {
 # In case of repackaging this is empty
   if [ -z "${_kernver}" ]; then
     cd "${srcdir}/linux-${_basekernel}"
-    _kernver="$(make kernelrelease)"
+    _kernver="$(make LOCALVERSION= kernelrelease)"
   fi
 
   install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
@@ -380,3 +397,11 @@ package_linux-libre-aufs_friendly-headers() {
   fi
 }
 
+pkgname=("${pkgbase}" "${pkgbase}-headers")
+for _p in ${pkgname[@]}; do
+  eval "package_${_p}() {
+    _package${_p#${pkgbase}}
+  }"
+done
+
+# vim:set ts=8 sts=2 sw=2 et: