linux-libre-4.2_gnu-4: updating version for armv7h

1 files changed, 209 insertions, 0 deletions

diff --git a/libre-testing/linux-libre/0003-SMILE-Plug-device-tree-file.patch b/libre-testing/linux-libre/0003-SMILE-Plug-device-tree-file.patch
new file mode 100644
index 000000000..2d573ca04
--- /dev/null
+++ b/libre-testing/linux-libre/0003-SMILE-Plug-device-tree-file.patch
@@ -0,0 +1,209 @@
+From c09c0e15623ad939dbc5483d48adce41085bf2aa Mon Sep 17 00:00:00 2001
+From: Kevin Mihelich <kevin@archlinuxarm.org>
+Date: Fri, 5 Sep 2014 15:41:19 -0600
+Subject: [PATCH 3/8] SMILE Plug device tree file
+
+This adds a dts file for the SMILE Plug, which only differs from the Mirabox
+dts with the LED definitions.
+
+Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
+---
+ arch/arm/boot/dts/Makefile                 |   1 +
+ arch/arm/boot/dts/armada-370-smileplug.dts | 173 +++++++++++++++++++++++++++++
+ 2 files changed, 174 insertions(+)
+ create mode 100644 arch/arm/boot/dts/armada-370-smileplug.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 246473a..5586e7a 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -672,6 +672,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
+ 	armada-370-db.dtb \
+ 	armada-370-dlink-dns327l.dtb \
+ 	armada-370-mirabox.dtb \
++	armada-370-smileplug.dtb \
+ 	armada-370-netgear-rn102.dtb \
+ 	armada-370-netgear-rn104.dtb \
+ 	armada-370-rd.dtb \
+diff --git a/arch/arm/boot/dts/armada-370-smileplug.dts b/arch/arm/boot/dts/armada-370-smileplug.dts
+new file mode 100644
+index 0000000..d01308a
+--- /dev/null
++++ b/arch/arm/boot/dts/armada-370-smileplug.dts
+@@ -0,0 +1,173 @@
++/*
++ * Device Tree file for Marvell SMILE Plug
++ *
++ * Kevin Mihelich <kevin@archlinuxarm.org>
++ * Gregory CLEMENT <gregory.clement@free-electrons.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include "armada-370.dtsi"
++
++/ {
++	model = "Marvell SMILE Plug";
++	compatible = "marvell,smileplug", "marvell,armada370", "marvell,armada-370-xp";
++
++	chosen {
++		bootargs = "console=ttyS0,115200 earlyprintk";
++	};
++
++	memory {
++		device_type = "memory";
++		reg = <0x00000000 0x20000000>; /* 512 MB */
++	};
++
++	soc {
++		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
++			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
++
++		pcie-controller {
++			status = "okay";
++
++			/* Internal mini-PCIe connector */
++			pcie@1,0 {
++				/* Port 0, Lane 0 */
++				status = "okay";
++			};
++
++			/* Connected on the PCB to a USB 3.0 XHCI controller */
++			pcie@2,0 {
++				/* Port 1, Lane 0 */
++				status = "okay";
++			};
++		};
++
++		internal-regs {
++			serial@12000 {
++				status = "okay";
++			};
++			timer@20300 {
++				clock-frequency = <600000000>;
++				status = "okay";
++			};
++
++			gpio_leds {
++				compatible = "gpio-leds";
++				pinctrl-names = "default";
++				pinctrl-0 = <&smile_led_pins>;
++
++				red_eyes_led {
++					label = "smileplug:red:eyes";
++					gpios = <&gpio1 31 0>;
++					default-state = "off";
++				};
++
++				green_eyes_led {
++					label = "smileplug:green:eyes";
++					gpios = <&gpio2 0 0>;
++					linux,default-trigger = "default-on";
++				};
++
++				red_smile_led {
++					label = "smileplug:red:smile";
++					gpios = <&gpio1 15 0>;
++					default-state = "off";
++				};
++
++				green_smile_led {
++					label = "smileplug:green:smile";
++					gpios = <&gpio1 27 0>;
++					linux,default-trigger = "default-on";
++				};
++			};
++
++			mdio {
++				pinctrl-0 = <&mdio_pins>;
++				pinctrl-names = "default";
++				phy0: ethernet-phy@0 {
++					reg = <0>;
++				};
++
++				phy1: ethernet-phy@1 {
++					reg = <1>;
++				};
++			};
++			ethernet@70000 {
++				pinctrl-0 = <&ge0_rgmii_pins>;
++				pinctrl-names = "default";
++				status = "okay";
++				phy = <&phy0>;
++				phy-mode = "rgmii-id";
++			};
++			ethernet@74000 {
++				pinctrl-0 = <&ge1_rgmii_pins>;
++				pinctrl-names = "default";
++				status = "okay";
++				phy = <&phy1>;
++				phy-mode = "rgmii-id";
++			};
++
++			mvsdio@d4000 {
++				pinctrl-0 = <&sdio_pins3>;
++				pinctrl-names = "default";
++				status = "okay";
++				/*
++				 * No CD or WP GPIOs: SDIO interface used for
++				 * Wifi/Bluetooth chip
++				 */
++				 broken-cd;
++			};
++
++			usb@50000 {
++				status = "okay";
++			};
++
++			usb@51000 {
++				status = "okay";
++			};
++
++			i2c@11000 {
++				status = "okay";
++				clock-frequency = <100000>;
++				pca9505: pca9505@25 {
++					compatible = "nxp,pca9505";
++					gpio-controller;
++					#gpio-cells = <2>;
++					reg = <0x25>;
++				};
++			};
++
++			nand@d0000 {
++				status = "okay";
++				num-cs = <1>;
++				marvell,nand-keep-config;
++				marvell,nand-enable-arbiter;
++				nand-on-flash-bbt;
++
++				partition@0 {
++					label = "U-Boot";
++					reg = <0 0x400000>;
++				};
++				partition@400000 {
++					label = "Linux";
++					reg = <0x400000 0x400000>;
++				};
++				partition@800000 {
++					label = "Filesystem";
++					reg = <0x800000 0x3f800000>;
++				};
++			};
++		};
++	};
++};
++
++&pinctrl {
++	smile_led_pins: smile-led-pins {
++		marvell,pins = "mpp63", "mpp64", "mpp47", "mpp59";
++		marvell,function = "gpio";
++	};
++};
+-- 
+2.4.5
+