linux-libre-3.14.6-1: updating version

6 files changed, 11 insertions, 162 deletions

diff --git a/libre/linux-libre/0005-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch b/libre/linux-libre/0005-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch
deleted file mode 100644
index 74283b57c..000000000
--- a/libre/linux-libre/0005-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 71d4f3022d1f625d94187f7cda682d2233a692d8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thomas=20B=C3=A4chler?= <thomas@archlinux.org>
-Date: Thu, 3 Apr 2014 23:59:49 +0200
-Subject: [PATCH 05/10] Revert "Bluetooth: Enable autosuspend for Intel
- Bluetooth device"
-
-This reverts commit d2bee8fb6e18f6116aada39851918473761f7ab1.
-
-USB autosuspend still breaks on some xhci controllers, so disable
-it by default as long as no solution is found.
----
- drivers/bluetooth/btusb.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
-diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
-index baeaaed..6d6e09e 100644
---- a/drivers/bluetooth/btusb.c
-+++ b/drivers/bluetooth/btusb.c
-@@ -1478,10 +1478,8 @@ static int btusb_probe(struct usb_interface *intf,
- 	if (id->driver_info & BTUSB_BCM92035)
- 		hdev->setup = btusb_setup_bcm92035;
- 
--	if (id->driver_info & BTUSB_INTEL) {
--		usb_enable_autosuspend(data->udev);
-+	if (id->driver_info & BTUSB_INTEL)
- 		hdev->setup = btusb_setup_intel;
--	}
- 
- 	/* Interface numbers are hardcoded in the specification */
- 	data->isoc = usb_ifnum_to_if(data->udev, 1);
--- 
-1.9.2
-
diff --git a/libre/linux-libre/0010-iwlwifi-mvm-delay-enabling-smart-FIFO-until-after-be.patch b/libre/linux-libre/0010-iwlwifi-mvm-delay-enabling-smart-FIFO-until-after-be.patch
deleted file mode 100644
index 7f18091a4..000000000
--- a/libre/linux-libre/0010-iwlwifi-mvm-delay-enabling-smart-FIFO-until-after-be.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 784c4f0b18f89922ddc0fe21e5ec64cc370bb3f2 Mon Sep 17 00:00:00 2001
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 19 Mar 2014 18:36:39 +0100
-Subject: [PATCH 10/10] iwlwifi: mvm: delay enabling smart FIFO until after
- beacon RX
-
-If we have no beacon data before association, delay smart FIFO
-enablement until after we have this data.
-
-Not doing so can cause association failures in extremely silent
-environments (usually only a shielded box/room) as beacon RX is
-not sent to the host immediately, and then the association time
-event ends without the host receiving any beacon even though it
-was on the air - it's just stuck on the FIFO.
-
-Cc: <stable@vger.kernel.org> [3.14]
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
----
- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 1 +
- drivers/net/wireless/iwlwifi/mvm/sf.c       | 3 ++-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
-index c35b866..45e861e 100644
---- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
-+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
-@@ -971,6 +971,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
- 		 */
- 		iwl_mvm_remove_time_event(mvm, mvmvif,
- 					  &mvmvif->time_event_data);
-+		iwl_mvm_sf_update(mvm, vif, false);
- 	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
- 			      BSS_CHANGED_QOS)) {
- 		ret = iwl_mvm_power_update_mode(mvm, vif);
-diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c
-index 8401627..88809b2 100644
---- a/drivers/net/wireless/iwlwifi/mvm/sf.c
-+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
-@@ -274,7 +274,8 @@ int iwl_mvm_sf_update(struct iwl_mvm *mvm, struct ieee80211_vif *changed_vif,
- 				return -EINVAL;
- 			if (changed_vif->type != NL80211_IFTYPE_STATION) {
- 				new_state = SF_UNINIT;
--			} else if (changed_vif->bss_conf.assoc) {
-+			} else if (changed_vif->bss_conf.assoc &&
-+				   changed_vif->bss_conf.dtim_period) {
- 				mvmvif = iwl_mvm_vif_from_mac80211(changed_vif);
- 				sta_id = mvmvif->ap_sta_id;
- 				new_state = SF_FULL_ON;
--- 
-1.9.2
-
diff --git a/libre/linux-libre/0015-fix-xsdt-validation.patch b/libre/linux-libre/0015-fix-xsdt-validation.patch
deleted file mode 100644
index 82dd2be25..000000000
--- a/libre/linux-libre/0015-fix-xsdt-validation.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-@@ -, +, @@ 
- acpi_tb_parse_root_table().
-  Commit: 671cc68dc61f029d44b43a681356078e02d8dab8
-  Subject: ACPICA: Back port and refine validation of the XSDT root table.
----
- drivers/acpi/acpica/tbutils.c |    6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
---- a/drivers/acpi/acpica/tbutils.c	
-+++ a/drivers/acpi/acpica/tbutils.c	
-@@ -461,6 +461,7 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address)
- 	u32 table_count;
- 	struct acpi_table_header *table;
- 	acpi_physical_address address;
-+	acpi_physical_address rsdt_address;
- 	u32 length;
- 	u8 *table_entry;
- 	acpi_status status;
-@@ -488,11 +489,13 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address)
- 		 * as per the ACPI specification.
- 		 */
- 		address = (acpi_physical_address) rsdp->xsdt_physical_address;
-+		rsdt_address = (acpi_physical_address) rsdp->rsdt_physical_address;
- 		table_entry_size = ACPI_XSDT_ENTRY_SIZE;
- 	} else {
- 		/* Root table is an RSDT (32-bit physical addresses) */
- 
- 		address = (acpi_physical_address) rsdp->rsdt_physical_address;
-+		rsdt_address = address;
- 		table_entry_size = ACPI_RSDT_ENTRY_SIZE;
- 	}
- 
-@@ -515,8 +518,7 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address)
- 
- 			/* Fall back to the RSDT */
- 
--			address =
--			    (acpi_physical_address) rsdp->rsdt_physical_address;
-+			address = rsdt_address;
- 			table_entry_size = ACPI_RSDT_ENTRY_SIZE;
- 		}
- 	}
-
diff --git a/libre/linux-libre/PKGBUILD b/libre/linux-libre/PKGBUILD
index 9f0dda4ef..56c5ef0ae 100644
--- a/libre/linux-libre/PKGBUILD
+++ b/libre/linux-libre/PKGBUILD
@@ -1,4 +1,4 @@
-# $Id: PKGBUILD 213942 2014-06-01 05:52:43Z tpowa $
+# $Id: PKGBUILD 214389 2014-06-08 19:44:39Z tpowa $
 # Maintainer (Arch): Tobias Powalowski <tpowa@archlinux.org>
 # Maintainer (Arch): Thomas Baechler <thomas@archlinux.org>
 # Maintainer: André Silva <emulatorman@parabola.nu>
@@ -10,7 +10,7 @@
 pkgbase=linux-libre         # Build stock -LIBRE kernel
 #pkgbase=linux-libre-custom # Build kernel with a different name
 _basekernel=3.14
-_sublevel=5
+_sublevel=6
 pkgver=${_basekernel}.${_sublevel}
 pkgrel=1
 _lxopkgver=${_basekernel}.5 # nearly always the same as pkgver
@@ -32,17 +32,13 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gn
         '0001-Bluetooth-allocate-static-minor-for-vhci.patch'
         '0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
         '0003-module-remove-MODULE_GENERIC_TABLE.patch'
-        '0005-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch'
         '0006-genksyms-fix-typeof-handling.patch'
-        '0010-iwlwifi-mvm-delay-enabling-smart-FIFO-until-after-be.patch'
-        '0011-kernfs-fix-removed-error-check.patch'
         '0012-fix-saa7134.patch'
-        '0015-fix-xsdt-validation.patch'
         "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.xz")
 sha256sums=('477555c709b9407fe37dbd70d3331ff9dde1f9d874aba2741f138d07ae6f281b'
-            '0bc9acbcc6d5fcabcc133a767c55e3040475e950ef80f866038d4ba0033e78d8'
-            '71891ae6903598f4686e86fdb0d371ff9e179e8dac1d2cf60ca16c5190916745'
-            'fca0060bde385e2c292489087af0aa5f48da594221a6d162fc6f8ba2159571e8'
+            'ae83fbc10c77ed665f029502c90a458a711f9188216e34a1354073dba31a1b26'
+            '32aa542d854f9c87ded3c6acc51537b25e37dd8921af79f71a4f035ed965ede0'
+            '3f2420725cfe1cd271e8ea6084ad141f54d117965b46adffae92a49e9b8ce0f7'
             'dfe01c93d83cdac9ca502715ceb6ac9502d327c939fec2e3052a5a58422dc176'
             'c5451d5e1eafc4f8d28b1a2958ec3102c124433a414a86450fc32058e004156b'
             '55bf07738a3286168a7929ae16dbca29defd14e77b9d24c487ae4c3d12bb9eb9'
@@ -51,12 +47,8 @@ sha256sums=('477555c709b9407fe37dbd70d3331ff9dde1f9d874aba2741f138d07ae6f281b'
             '6d72e14552df59e6310f16c176806c408355951724cd5b48a47bf01591b8be02'
             '52dec83a8805a8642d74d764494acda863e0aa23e3d249e80d4b457e20a3fd29'
             '65d58f63215ee3c5f9c4fc6bce36fc5311a6c7dbdbe1ad29de40647b47ff9c0d'
-            '3fffb01cf97a5a7ab9601cb277d2468c0fb1e1cceba4225915f3ffae3a5694ec'
             'cf2e7a2d00787f754028e7459688c2755a406e632ce48b60952fa4ff7ed6f4b7'
-            'c0af4622f75c89fef62183e18b7d49998228d4eaa906c6accaf4aa4ff0134f85'
-            '04f44bf5c181d6dc31905937c1bdccb0f5aecaad3a579e99b302502b9cbe0f7a'
             '79359454c9d8446eb55add2b1cdbf8332bd67dafb01fefb5b1ca090225f64d18'
-            '384dd13fd4248fd6809da8c6ae29ced55d4a5cacc33ac2ae7522093ec0fb26d4'
             '4f1db7c68dbff6d80258de4074af46b989cedcda175776b567cd4658b33c9f99')
 if [ "$CARCH" != "mips64el" ]; then
     # don't use the Loongson-specific patches on non-mips64el arches.
@@ -92,33 +84,15 @@ prepare() {
   patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
   patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
 
-  # Disable usb autosuspend for intel btusb
-  # See http://www.spinics.net/lists/kernel/msg1716461.html
-  # Until a solution is found, make sure the driver leaves autosuspend alone
-  patch -p1 -i "${srcdir}/0005-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch"
-
   # Fix generation of symbol CRCs
   # http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dc53324060f324e8af6867f57bf4891c13c6ef18
   patch -p1 -i "${srcdir}/0006-genksyms-fix-typeof-handling.patch"
 
-  # https://git.kernel.org/cgit/linux/kernel/git/iwlwifi/iwlwifi-fixes.git/commit/?id=12f853a89e29f50b17698e17e73c328a35f1498d
-  # FS#39815
-  patch -p1 -i "${srcdir}/0010-iwlwifi-mvm-delay-enabling-smart-FIFO-until-after-be.patch"
-  
-  # fix Xorg crash with i810 chipset due to wrong removed error check
-  # References: http://lkml.kernel.org/g/533D01BD.1010200@googlemail.com
-  patch -Np1 -i "${srcdir}/0011-kernfs-fix-removed-error-check.patch"
-
   # fix saa7134 video
   # https://bugs.archlinux.org/task/39904
   # https://bugzilla.kernel.org/show_bug.cgi?id=73361
   patch -Np1 -i "${srcdir}/0012-fix-saa7134.patch"
 
-  # fix xsdt validation bug
-  # https://bugs.archlinux.org/task/39811
-  # https://bugzilla.kernel.org/show_bug.cgi?id=73911
-  patch -Np1 -i "${srcdir}/0015-fix-xsdt-validation.patch"
-
   if [ "$CARCH" == "mips64el" ]; then
     sed -i "s|^EXTRAVERSION.*|EXTRAVERSION =-libre|" Makefile
     sed -r "s|^( SUBLEVEL = ).*|\1$_sublevel|" \
diff --git a/libre/linux-libre/config.i686 b/libre/linux-libre/config.i686
index 184db97b8..8f5a286f3 100644
--- a/libre/linux-libre/config.i686
+++ b/libre/linux-libre/config.i686
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 3.14.0-4 Kernel Configuration
+# Linux/x86 3.14.6-1 Kernel Configuration
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
@@ -208,6 +208,7 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
@@ -270,7 +271,6 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -533,6 +533,7 @@ CONFIG_PM_CLK=y
 CONFIG_ACPI=y
 CONFIG_ACPI_SLEEP=y
 # CONFIG_ACPI_PROCFS is not set
+# CONFIG_ACPI_PROCFS_POWER is not set
 CONFIG_ACPI_EC_DEBUGFS=m
 CONFIG_ACPI_AC=m
 CONFIG_ACPI_BATTERY=m
diff --git a/libre/linux-libre/config.x86_64 b/libre/linux-libre/config.x86_64
index 1a32c7bf7..d8408c906 100644
--- a/libre/linux-libre/config.x86_64
+++ b/libre/linux-libre/config.x86_64
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86 3.14.0-4 Kernel Configuration
+# Linux/x86 3.14.6-1 Kernel Configuration
 #
 CONFIG_64BIT=y
 CONFIG_X86_64=y
@@ -217,6 +217,7 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
@@ -281,7 +282,6 @@ CONFIG_COMPAT_OLD_SIGACTION=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -541,6 +541,7 @@ CONFIG_PM_CLK=y
 CONFIG_ACPI=y
 CONFIG_ACPI_SLEEP=y
 # CONFIG_ACPI_PROCFS is not set
+# CONFIG_ACPI_PROCFS_POWER is not set
 CONFIG_ACPI_EC_DEBUGFS=m
 CONFIG_ACPI_AC=m
 CONFIG_ACPI_BATTERY=m