libre/linux-libre-3.2.1-1

4 files changed, 35 insertions, 28 deletions

diff --git a/libre/linux-libre/PKGBUILD b/libre/linux-libre/PKGBUILD
index 2a11dcd96..3bd2c7fe6 100644
--- a/libre/linux-libre/PKGBUILD
+++ b/libre/linux-libre/PKGBUILD
@@ -9,7 +9,7 @@ pkgname=('linux-libre' 'linux-libre-headers' 'linux-libre-docs') # Build stock -
 # pkgname=linux-custom       # Build kernel with a different name
 _kernelname=${pkgname#linux-libre}
 _basekernel=3.2
-pkgver=${_basekernel}
+pkgver=${_basekernel}.1
 pkgrel=1
 arch=('i686' 'x86_64' 'mips64el')
 url="http://linux-libre.fsfla.org/"
@@ -17,7 +17,7 @@ license=('GPL2')
 makedepends=('xmlto' 'docbook-xsl')
 options=('!strip')
 source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-libre/linux-${_basekernel}-libre.tar.xz"
-#        "http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-libre/patch-${_basekernel}-libre-${pkgver}-libre.xz"
+        "http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-libre/patch-${_basekernel}-libre-${pkgver}-libre.xz"
         "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/linux-patches-${pkgver}-libre-lemote_0lxo_mipsel.tar.bz2"
         # the main kernel config files
         'config.i686' 'config.x86_64'
@@ -28,7 +28,7 @@ source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-li
         'boot-logo.patch'
         'change-default-console-loglevel.patch'
         'i915-fix-ghost-tv-output.patch'
-        'usb-add-reset-resume-quirk-for-several-webcams.patch')
+        'i915-gpu-finish.patch')
 
 build() {
   cd "${srcdir}/linux-${_basekernel}"
@@ -40,6 +40,10 @@ build() {
   # Add freedo as boot logo
   patch -Np1 -i "${srcdir}/boot-logo.patch"
 
+  # fix FS#27883
+  # drm/i915: Only clear the GPU domains upon a successful finish
+  patch -Np1 -i "${srcdir}/i915-gpu-finish.patch"
+
   # Some chips detect a ghost TV output
   # mailing list discussion: http://lists.freedesktop.org/archives/intel-gfx/2011-April/010371.html
   # Arch Linux bug report: FS#19234
@@ -49,10 +53,6 @@ build() {
   # needed.
   patch -Np1 -i "${srcdir}/i915-fix-ghost-tv-output.patch"
 
-  # Add the USB_QUIRK_RESET_RESUME for several webcams
-  # FS#26528
-  patch -Np1 -i "${srcdir}/usb-add-reset-resume-quirk-for-several-webcams.patch"
-
   # set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
   # remove this when a Kconfig knob is made available by upstream
   # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
@@ -340,3 +340,15 @@ package_linux-libre-docs() {
   # remove a file already in linux package
   rm -f "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
 }
+md5sums=('27c641c4f6785fc647cdd3e44963a55c'
+         '6e0c99536652e7deb71acbadc980b586'
+         'fb12372c5c7bc4e5328b38953616c7a5'
+         '92f62a90c1df8d74704a510d28146c52'
+         '576ba68b171efd4a3333736c30f334ef'
+         'a8a3843046926eb7ab81312cd438c5c5'
+         '2967cecc3af9f954ccc822fd63dca6ff'
+         '8267264d9a8966e57fdacd1fa1fc65c4'
+         '04b21c79df0a952c22d681dd4f4562df'
+         '9d3c56a4b999c8bfbd4018089a62f662'
+         '263725f20c0b9eb9c353040792d644e5'
+         '4cd79aa147825837dc8bc9f6b736c0a0')
diff --git a/libre/linux-libre/config.i686 b/libre/linux-libre/config.i686
index a310f72e1..9aace04bc 100644
--- a/libre/linux-libre/config.i686
+++ b/libre/linux-libre/config.i686
@@ -1293,7 +1293,8 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_REGMAP=y
 CONFIG_REGMAP_I2C=m
 CONFIG_REGMAP_SPI=y
-CONFIG_CONNECTOR=m
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 CONFIG_MTD=m
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_REDBOOT_PARTS=m
@@ -2265,13 +2266,11 @@ CONFIG_CARL9170_WPC=y
 CONFIG_ATH6KL=m
 # CONFIG_ATH6KL_DEBUG is not set
 CONFIG_B43=m
-CONFIG_B43_BCMA=y
 CONFIG_B43_SSB=y
 CONFIG_B43_PCI_AUTOSELECT=y
 CONFIG_B43_PCICORE_AUTOSELECT=y
 CONFIG_B43_PCMCIA=y
 CONFIG_B43_SDIO=y
-CONFIG_B43_BCMA_PIO=y
 CONFIG_B43_PIO=y
 CONFIG_B43_PHY_N=y
 CONFIG_B43_PHY_LP=y
@@ -2290,7 +2289,10 @@ CONFIG_B43LEGACY_PIO=y
 CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 # CONFIG_B43LEGACY_DMA_MODE is not set
 # CONFIG_B43LEGACY_PIO_MODE is not set
-# CONFIG_BRCMFMAC is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
@@ -3314,11 +3316,7 @@ CONFIG_BCMA_POSSIBLE=y
 #
 # Broadcom specific AMBA
 #
-CONFIG_BCMA=m
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_PCI=y
-# CONFIG_BCMA_DEBUG is not set
+# CONFIG_BCMA is not set
 
 #
 # Multifunction device drivers
diff --git a/libre/linux-libre/config.x86_64 b/libre/linux-libre/config.x86_64
index df37a6f20..42aafc2bb 100644
--- a/libre/linux-libre/config.x86_64
+++ b/libre/linux-libre/config.x86_64
@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86_64 3.1.6-1 Kernel Configuration
+# Linux/x86_64 3.2.0 Kernel Configuration
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
@@ -1252,7 +1252,8 @@ CONFIG_SYS_HYPERVISOR=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_I2C=m
 CONFIG_REGMAP_SPI=y
-CONFIG_CONNECTOR=m
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 CONFIG_MTD=m
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_REDBOOT_PARTS=m
@@ -2151,13 +2152,11 @@ CONFIG_CARL9170_WPC=y
 CONFIG_ATH6KL=m
 # CONFIG_ATH6KL_DEBUG is not set
 CONFIG_B43=m
-CONFIG_B43_BCMA=y
 CONFIG_B43_SSB=y
 CONFIG_B43_PCI_AUTOSELECT=y
 CONFIG_B43_PCICORE_AUTOSELECT=y
 CONFIG_B43_PCMCIA=y
 CONFIG_B43_SDIO=y
-CONFIG_B43_BCMA_PIO=y
 CONFIG_B43_PIO=y
 CONFIG_B43_PHY_N=y
 CONFIG_B43_PHY_LP=y
@@ -2176,7 +2175,10 @@ CONFIG_B43LEGACY_PIO=y
 CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 # CONFIG_B43LEGACY_DMA_MODE is not set
 # CONFIG_B43LEGACY_PIO_MODE is not set
-# CONFIG_BRCMFMAC is not set
+CONFIG_BRCMUTIL=m
+CONFIG_BRCMSMAC=m
+CONFIG_BRCMFMAC=m
+# CONFIG_BRCMDBG is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
@@ -3163,11 +3165,7 @@ CONFIG_BCMA_POSSIBLE=y
 #
 # Broadcom specific AMBA
 #
-CONFIG_BCMA=m
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_PCI=y
-# CONFIG_BCMA_DEBUG is not set
+# CONFIG_BCMA is not set
 
 #
 # Multifunction device drivers
diff --git a/libre/linux-libre/linux-libre.install b/libre/linux-libre/linux-libre.install
index 3e86e1c56..f08840c94 100644
--- a/libre/linux-libre/linux-libre.install
+++ b/libre/linux-libre/linux-libre.install
@@ -2,7 +2,7 @@
 # arg 2:  the old package version
 
 KERNEL_NAME=
-KERNEL_VERSION=3.2.0-1-LIBRE
+KERNEL_VERSION=3.2.1-1-LIBRE
 
 post_install () {
   # updating module dependencies
@@ -45,7 +45,6 @@ post_upgrade() {
 
   if findmnt --fstab -uno SOURCE /boot &>/dev/null && ! mountpoint -q /boot; then
     echo "WARNING: /boot appears to be a separate partition but is not mounted."
-    echo "         You probably just broke your system. Congratulations."
   fi
 
   # updating module dependencies