babeld: upgrade to 1.5

1 files changed, 49 insertions, 0 deletions

diff --git a/pcr/babeld/babeld.conf b/pcr/babeld/babeld.conf
new file mode 100644
index 000000000..948671463
--- /dev/null
+++ b/pcr/babeld/babeld.conf
@@ -0,0 +1,49 @@
+# Configuration for babeld. See the man page babeld(8) for
+# details on the configuration format.
+
+# You must provide at least one interface for babeld to operate on.
+#interface eth0
+#interface wlan0
+
+# Global options you might want to set. There are many more, see the man page.
+#debug 1
+#local-port 33123
+#diversity true
+#random-id true
+
+# Per-interface configuration. Note that each interface referenced here
+# will be used by babeld.
+#interface eth1 rxcost 10
+#interface tun0 faraway true
+#interface wlan0 hello-interval 1
+
+# Since 1.4.2, you can also specify defaults for interface parameters, which
+# will be used for all interfaces except specified otherwise (see above).
+#default rxcost 42
+#default hello-interval 5
+
+# Since 1.5.0, you can use the RTT-based metric, most useful for a network
+# with tunnels (overlay network).
+#default enable-timestamps true
+#interface tun0 max-rtt-penalty 150
+#interface tun0 rtt-max 100
+
+
+# Filtering rules.
+
+# Only accept routes included in a specific prefix.
+#in ip 192.168.42.0/24 allow
+#in ip 2001:db8:cafe:cafe::/64 allow
+#in deny
+
+# Only redistribute addresses from a given prefix, to avoid redistributing
+# all local addresses
+#redistribute ip 192.168.1.0/24 local allow
+#redistribute ip 2001:db8:cafe:cafe::/64 local allow
+#redistribute local deny
+
+# Redistribute a default route obtained otherwise (here, through DHCP or
+# configured statically).
+# Note that babeld ignores kernel routes with proto 3 (boot) by default.
+#redistribute proto 3 ip 0.0.0.0/0 eq 0 metric 50
+#redistribute proto 3 ip ::/0 eq 0 metric 50