diff options
Diffstat (limited to 'libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1')
| -rw-r--r-- | libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 b/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 deleted file mode 100644 index ac4f758fe..000000000 --- a/libre-testing/uboot-udoo/0001-parabola-arm-modifications.patch.testing1 +++ /dev/null @@ -1,241 +0,0 @@ -diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg ---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D -+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 -+ -+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 -+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 -+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -+ -+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -+ -+ -+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -+ -+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -+ -+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -+ -+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -+ -+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -+ -+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 -+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 -+ -+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 -+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 -+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 -+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 -+ -+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 -+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -+ -+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 -+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D -+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg ---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,84 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+/* -+ * DDR3 settings -+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6DL ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 32 bits x16/x32 -+ */ -+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 -+ -+/* (differential input) */ -+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -+/* (differential input) */ -+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -+/* disable ddr pullups */ -+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -+ -+/* Read data DQ Byte0-3 delay */ -+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 -diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg ---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,29 @@ -+/* -+ * Copyright (C) 2013 Boundary Devices -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Refer doc/README.imximage for more details about how-to configure -+ * and create imximage boot image -+ * -+ * The syntax is taken as close as possible with the kwbimage -+ */ -+ -+/* image version */ -+IMAGE_VERSION 2 -+ -+/* -+ * Boot Device : one of -+ * spi, sd (the board has no nand neither onenand) -+ */ -+BOOT_FROM sd -+ -+#define __ASSEMBLY__ -+#include <config.h> -+#include "asm/arch/mx6-ddr.h" -+#include "asm/arch/iomux.h" -+#include "asm/arch/crm_regs.h" -+ -+#include "ddr-setup_dl.cfg" -+#include "1066mhz_4x256mx16_dl.cfg" -+#include "clocks.cfg" -diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig ---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-24 01:42:53.330380669 -0300 -@@ -0,0 +1,3 @@ -+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" -+CONFIG_ARM=y -+CONFIG_TARGET_UDOO=y -diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h ---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 -+++ u-boot-2015.01/include/configs/udoo.h 2016-02-24 01:47:09.384245992 -0300 -@@ -96,11 +96,26 @@ - #define CONFIG_BOUNCE_BUFFER - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION - -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre ARM" -+ -+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" -+#elif defined(CONFIG_MX6Q) - #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+#endif -+ -+/* Enable extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include <config_distro_bootcmd.h> - - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "console=ttymxc1\0" \ -@@ -111,9 +126,11 @@ - "fdt_addr=0x18000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ -+ "devtype=mmc\0" \ -+ "devnum=0\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ -- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ -@@ -178,6 +195,7 @@ - - #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ -+ "run scan_dev_for_boot;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ |