diff options
Diffstat (limited to 'libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch')
-rw-r--r-- | libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch | 135 |
1 files changed, 0 insertions, 135 deletions
diff --git a/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch deleted file mode 100644 index 09aee7ce0..000000000 --- a/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,135 +0,0 @@ -diff -Nur u-boot-2016.01.orig/include/configs/ti_omap4_common.h u-boot-2016.01/include/configs/ti_omap4_common.h ---- u-boot-2016.01.orig/include/configs/ti_omap4_common.h 2016-01-12 11:06:54.000000000 -0300 -+++ u-boot-2016.01/include/configs/ti_omap4_common.h 2016-02-24 23:19:09.761629260 -0300 -@@ -46,7 +46,6 @@ - * the timings to use or use pre-determined timings (based on using the - * dynamic method. Default to the static timing infomation. - */ --#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION - #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -@@ -79,33 +78,74 @@ - #define CONFIG_USB_TTY 1 - #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -+/* Parabola GNU/Linux-libre extras */ -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+ -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include <config_distro_bootcmd.h> -+ - /* - * Environment setup - */ - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - "console=ttyO2,115200n8\0" \ - "fdtfile=undefined\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ -+ "fdtdir=/boot/dtbs\0" \ - "bootfile=zImage\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ -- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ -- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ -- "source ${loadaddr}\0" \ -- "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ -- "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ -- "env import -t ${loadaddr} ${filesize}\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ -- "mmcboot=echo Booting from mmc${mmcdev} ...; " \ -- "run args_mmc; " \ -- "bootz ${loadaddr} - ${fdtaddr}\0" \ -- "uimageboot=echo Booting from mmc${mmcdev} ...; " \ -- "run args_mmc; " \ -- "bootm ${loadaddr}\0" \ -+ "optargs=\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "vram=${vram} " \ -+ "root=${root} " \ -+ "${optargs}\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "setenv devnum 0;" \ -+ "while ${devtype} dev ${devnum}; do " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "done;" \ -+ "done;\0" \ - "findfdt="\ - "if test $board_name = sdp4430; then " \ - "setenv fdtfile omap4-sdp.dtb; fi; " \ -@@ -118,32 +158,11 @@ - "if test $board_name = duovero; then " \ - "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ -- "echo WARNING: Could not determine device tree to use; fi; \0" \ -- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -+ "echo WARNING: Could not determine device tree to use; fi; \0" - - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadbootenv; then " \ -- "run importbootenv; " \ -- "fi;" \ -- "if test -n ${uenvcmd}; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "fi;" \ -- "if run loadimage; then " \ -- "run loadfdt;" \ -- "run mmcboot; " \ -- "fi; " \ -- "if run loaduimage; then " \ -- "run uimageboot;" \ -- "fi; " \ -- "fi" -+ "run mmcboot" - - /* - * Defines for SPL |