summaryrefslogtreecommitdiff
path: root/libre
diff options
context:
space:
mode:
Diffstat (limited to 'libre')
-rw-r--r--libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch93
-rw-r--r--libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch76
-rw-r--r--libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch31
-rw-r--r--libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch109
-rw-r--r--libre/uboot-chiliboard/0005-chiliboard-support.patch1685
-rw-r--r--libre/uboot-chiliboard/0006-parabola-arm-modifications.patch177
-rw-r--r--libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new174
-rw-r--r--libre/uboot-chiliboard/PKGBUILD59
-rw-r--r--libre/uboot-chiliboard/uEnv.txt1
-rw-r--r--libre/uboot-chiliboard/uboot-chiliboard.install32
10 files changed, 2437 insertions, 0 deletions
diff --git a/libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch b/libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
new file mode 100644
index 000000000..bdb6699e6
--- /dev/null
+++ b/libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
@@ -0,0 +1,93 @@
+From 0a3f119b5221e16feb1cbe4036cc16d1dc4c194c Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Sat, 7 Feb 2015 22:52:40 +0100
+Subject: [PATCH 1/6] Add linux/compiler-gcc5.h to fix builds with gcc5
+
+Add linux/compiler-gcc5/h from the kernel sources at:
+
+commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b
+Author: Steven Noonan <steven@uplinklabs.net>
+Date: Sat Oct 25 15:09:42 2014 -0700
+
+ compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 65 insertions(+)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..c8c5659
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used __attribute__((__used__))
++#define __must_check __attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b) __builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++ to them will be unlikely. This means a lot of manual unlikely()s
++ are unnecessary now for any paths leading to the usual suspects
++ like BUG(), printk(), panic() etc. [but let's keep them for now for
++ older compilers]
++
++ Early snapshots of gcc 4.3 don't support this and we can't detect this
++ in the preprocessor, but we can live with this because they're unreleased.
++ Maketime probing would be overkill here.
++
++ gcc also has a __attribute__((__hot__)) to move hot functions into
++ a special section, but I don't see any sense in this right now in
++ the kernel context */
++#define __cold __attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable. This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased. Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone __attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+--
+2.5.0
+
diff --git a/libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch b/libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
new file mode 100644
index 000000000..6ec3d82fc
--- /dev/null
+++ b/libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch
@@ -0,0 +1,76 @@
+From a29b67a36a2b59acfc9cb7adc6e3bc06c490d4ee Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen@myspectrum.nl>
+Date: Sun, 22 Jun 2014 23:10:39 +0200
+Subject: [PATCH 2/6] ARM:asm:io.h use static inline
+
+When compiling u-boot with W=1 the extern inline void for
+read* is likely causing the most noise. gcc / clang will
+warn there is never a actual declaration for these functions.
+Instead of declaring these extern make them static inline so
+it is actually declared.
+
+cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
+Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
+---
+ arch/arm/include/asm/io.h | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 214f3ea..dc6138a 100644
+--- a/arch/arm/include/asm/io.h
++++ b/arch/arm/include/asm/io.h
+@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
+ #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v))
+ #define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v))
+
+-extern inline void __raw_writesb(unsigned long addr, const void *data,
++static inline void __raw_writesb(unsigned long addr, const void *data,
+ int bytelen)
+ {
+ uint8_t *buf = (uint8_t *)data;
+@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
+ __arch_putb(*buf++, addr);
+ }
+
+-extern inline void __raw_writesw(unsigned long addr, const void *data,
++static inline void __raw_writesw(unsigned long addr, const void *data,
+ int wordlen)
+ {
+ uint16_t *buf = (uint16_t *)data;
+@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
+ __arch_putw(*buf++, addr);
+ }
+
+-extern inline void __raw_writesl(unsigned long addr, const void *data,
++static inline void __raw_writesl(unsigned long addr, const void *data,
+ int longlen)
+ {
+ uint32_t *buf = (uint32_t *)data;
+@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
+ __arch_putl(*buf++, addr);
+ }
+
+-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
++static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+ {
+ uint8_t *buf = (uint8_t *)data;
+ while(bytelen--)
+ *buf++ = __arch_getb(addr);
+ }
+
+-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
++static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+ {
+ uint16_t *buf = (uint16_t *)data;
+ while(wordlen--)
+ *buf++ = __arch_getw(addr);
+ }
+
+-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
++static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+ {
+ uint32_t *buf = (uint32_t *)data;
+ while(longlen--)
+--
+2.5.0
+
diff --git a/libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch b/libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
new file mode 100644
index 000000000..baf1efd5d
--- /dev/null
+++ b/libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch
@@ -0,0 +1,31 @@
+From dc7efb77bbd59224855713a554bb3721568a85c6 Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen@myspectrum.nl>
+Date: Thu, 26 Jun 2014 20:18:31 +0200
+Subject: [PATCH 3/6] common: main.c: make show_boot_progress __weak
+
+This not only looks a bit better it also prevents a
+warning with W=1 (no previous prototype).
+
+Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
+Acked-by: Simon Glass <sjg@chromium.org>
+---
+ common/main.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+diff --git a/common/main.c b/common/main.c
+index 32618f1..2979fbe 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+ * Board-specific Platform code can reimplement show_boot_progress () if needed
+ */
+-void inline __show_boot_progress (int val) {}
+-void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
++__weak void show_boot_progress(int val) {}
+
+ static void modem_init(void)
+ {
+--
+2.5.0
+
diff --git a/libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
new file mode 100644
index 000000000..f2237a229
--- /dev/null
+++ b/libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch
@@ -0,0 +1,109 @@
+From ea9b2d003712ae2c6158abb5c9f285f593e8fcb0 Mon Sep 17 00:00:00 2001
+From: Jeroen Hofstee <jeroen@myspectrum.nl>
+Date: Mon, 23 Jun 2014 23:20:19 +0200
+Subject: [PATCH 4/6] common: board_f: cosmetic use __weak for leds
+
+First of all this looks a lot better, but it also
+prevents a gcc warning (W=1), that the weak function
+has no previous prototype.
+
+cc: Simon Glass <sjg@chromium.org>
+Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
+Acked-by: Simon Glass <sjg@chromium.org>
+---
+ common/board_f.c | 29 ++++++++++-------------------
+ include/status_led.h | 22 +++++++++++-----------
+ 2 files changed, 21 insertions(+), 30 deletions(-)
+
+diff --git a/common/board_f.c b/common/board_f.c
+index 4ea4cb2..bdab38e 100644
+--- a/common/board_f.c
++++ b/common/board_f.c
+@@ -37,6 +37,7 @@
+ #include <os.h>
+ #include <post.h>
+ #include <spi.h>
++#include <status_led.h>
+ #include <trace.h>
+ #include <watchdog.h>
+ #include <asm/errno.h>
+@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR;
+ ************************************************************************
+ * May be supplied by boards if desired
+ */
+-inline void __coloured_LED_init(void) {}
+-void coloured_LED_init(void)
+- __attribute__((weak, alias("__coloured_LED_init")));
+-inline void __red_led_on(void) {}
+-void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+-inline void __red_led_off(void) {}
+-void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+-inline void __green_led_on(void) {}
+-void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+-inline void __green_led_off(void) {}
+-void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+-inline void __yellow_led_on(void) {}
+-void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+-inline void __yellow_led_off(void) {}
+-void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+-inline void __blue_led_on(void) {}
+-void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+-inline void __blue_led_off(void) {}
+-void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
++__weak void coloured_LED_init(void) {}
++__weak void red_led_on(void) {}
++__weak void red_led_off(void) {}
++__weak void green_led_on(void) {}
++__weak void green_led_off(void) {}
++__weak void yellow_led_on(void) {}
++__weak void yellow_led_off(void) {}
++__weak void blue_led_on(void) {}
++__weak void blue_led_off(void) {}
+
+ /*
+ * Why is gd allocated a register? Prior to reloc it might be better to
+diff --git a/include/status_led.h b/include/status_led.h
+index 0eb91b8..b8aaaf7 100644
+--- a/include/status_led.h
++++ b/include/status_led.h
+@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state);
+ # include <asm/status_led.h>
+ #endif
+
++#endif /* CONFIG_STATUS_LED */
++
+ /*
+ * Coloured LEDs API
+ */
+ #ifndef __ASSEMBLY__
+-extern void coloured_LED_init (void);
+-extern void red_led_on(void);
+-extern void red_led_off(void);
+-extern void green_led_on(void);
+-extern void green_led_off(void);
+-extern void yellow_led_on(void);
+-extern void yellow_led_off(void);
+-extern void blue_led_on(void);
+-extern void blue_led_off(void);
++void coloured_LED_init(void);
++void red_led_on(void);
++void red_led_off(void);
++void green_led_on(void);
++void green_led_off(void);
++void yellow_led_on(void);
++void yellow_led_off(void);
++void blue_led_on(void);
++void blue_led_off(void);
+ #else
+ .extern LED_init
+ .extern red_led_on
+@@ -297,6 +299,4 @@ extern void blue_led_off(void);
+ .extern blue_led_off
+ #endif
+
+-#endif /* CONFIG_STATUS_LED */
+-
+ #endif /* _STATUS_LED_H_ */
+--
+2.5.0
+
diff --git a/libre/uboot-chiliboard/0005-chiliboard-support.patch b/libre/uboot-chiliboard/0005-chiliboard-support.patch
new file mode 100644
index 000000000..cbe029a69
--- /dev/null
+++ b/libre/uboot-chiliboard/0005-chiliboard-support.patch
@@ -0,0 +1,1685 @@
+From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001
+From: Kevin Mihelich <kevin@archlinuxarm.org>
+Date: Sat, 29 Aug 2015 08:56:32 -0600
+Subject: [PATCH 5/6] chiliboard support
+
+---
+ board/grinn/chiliboard/Makefile | 13 +
+ board/grinn/chiliboard/board.c | 447 +++++++++++++++++++
+ board/grinn/chiliboard/board.h | 20 +
+ board/grinn/chiliboard/mux.c | 99 +++++
+ board/grinn/chiliboard/u-boot.lds | 131 ++++++
+ boards.cfg | 5 +
+ drivers/mtd/nand/omap_gpmc.c | 6 +-
+ include/configs/chiliboard.h | 878 ++++++++++++++++++++++++++++++++++++++
+ 8 files changed, 1597 insertions(+), 2 deletions(-)
+ create mode 100644 board/grinn/chiliboard/Makefile
+ create mode 100644 board/grinn/chiliboard/board.c
+ create mode 100644 board/grinn/chiliboard/board.h
+ create mode 100644 board/grinn/chiliboard/mux.c
+ create mode 100644 board/grinn/chiliboard/u-boot.lds
+ create mode 100644 include/configs/chiliboard.h
+
+diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile
+new file mode 100644
+index 0000000..804ac37
+--- /dev/null
++++ b/board/grinn/chiliboard/Makefile
+@@ -0,0 +1,13 @@
++#
++# Makefile
++#
++# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
++#
++# SPDX-License-Identifier: GPL-2.0+
++#
++
++ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
++obj-y := mux.o
++endif
++
++obj-y += board.o
+diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c
+new file mode 100644
+index 0000000..ed8ab63
+--- /dev/null
++++ b/board/grinn/chiliboard/board.c
+@@ -0,0 +1,447 @@
++/*
++ * board.c
++ *
++ * Board functions for Grinn chiliboard, AM335X based boards
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <errno.h>
++#include <spl.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/omap.h>
++#include <asm/arch/ddr_defs.h>
++#include <asm/arch/clock.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/mmc_host_def.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/mem.h>
++#include <asm/io.h>
++#include <asm/emif.h>
++#include <asm/gpio.h>
++#include <i2c.h>
++#include <miiphy.h>
++#include <cpsw.h>
++#include <power/tps65217.h>
++#include <power/tps65910.h>
++#include <environment.h>
++#include <watchdog.h>
++#include <environment.h>
++#include "board.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++#define HDR_NAME_LEN 8
++
++static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
++
++#ifndef CONFIG_SKIP_LOWLEVEL_INIT
++static const struct ddr_data ddr2_chilisom_gcs1_data = {
++ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
++ (MT47H128M16RT25E_RD_DQS<<20) |
++ (MT47H128M16RT25E_RD_DQS<<10) |
++ (MT47H128M16RT25E_RD_DQS<<0)),
++ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
++ (MT47H128M16RT25E_WR_DQS<<20) |
++ (MT47H128M16RT25E_WR_DQS<<10) |
++ (MT47H128M16RT25E_WR_DQS<<0)),
++ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
++ (MT47H128M16RT25E_PHY_WRLVL<<20) |
++ (MT47H128M16RT25E_PHY_WRLVL<<10) |
++ (MT47H128M16RT25E_PHY_WRLVL<<0)),
++ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
++ (MT47H128M16RT25E_PHY_GATELVL<<20) |
++ (MT47H128M16RT25E_PHY_GATELVL<<10) |
++ (MT47H128M16RT25E_PHY_GATELVL<<0)),
++ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
++ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
++ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
++ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
++ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
++ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
++ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
++ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
++};
++
++static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = {
++ .cmd0csratio = MT47H128M16RT25E_RATIO,
++ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
++
++ .cmd1csratio = MT47H128M16RT25E_RATIO,
++ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
++
++ .cmd2csratio = MT47H128M16RT25E_RATIO,
++ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
++};
++
++static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = {
++ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
++ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
++ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
++ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
++ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
++ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
++};
++
++static const struct ddr_data ddr3_chilisom_gcs2_data = {
++ .datardsratio0 = MT41K256M16HA125E_RD_DQS,
++ .datawdsratio0 = MT41K256M16HA125E_WR_DQS,
++ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
++ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
++};
++
++static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = {
++ .cmd0csratio = MT41K256M16HA125E_RATIO,
++ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
++
++ .cmd1csratio = MT41K256M16HA125E_RATIO,
++ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
++
++ .cmd2csratio = MT41K256M16HA125E_RATIO,
++ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
++};
++
++static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = {
++ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
++ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
++ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
++ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
++ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
++ .zq_config = MT41K256M16HA125E_ZQ_CFG,
++ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
++};
++
++#ifdef CONFIG_SPL_OS_BOOT
++int spl_start_uboot(void)
++{
++ /* break into full u-boot on 'c' */
++ if (serial_tstc() && serial_getc() == 'c')
++ return 1;
++
++#ifdef CONFIG_SPL_ENV_SUPPORT
++ env_init();
++ env_relocate_spec();
++ if (getenv_yesno("boot_os") != 1)
++ return 1;
++#endif
++
++ return 0;
++}
++#endif
++
++#define OSC (V_OSCK/1000000)
++const struct dpll_params dpll_ddr_chilisom_gcs1 = {
++ 266, OSC-1, 1, -1, -1, -1, -1};
++const struct dpll_params dpll_ddr_chilisom_gcs2 = {
++ 400, OSC-1, 1, -1, -1, -1, -1};
++
++void am33xx_spl_board_init(void)
++{
++ int mpu_vdd;
++
++ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
++
++ int usb_cur_lim;
++
++ if (i2c_probe(TPS65217_CHIP_PM))
++ return;
++
++ uchar pmic_status_reg;
++ if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg))
++ return;
++ if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) {
++ puts("No AC power, disabling frequency switch\n");
++ return;
++ }
++
++ /*
++ * Increase USB current limit to 1300mA or 1800mA and set
++ * the MPU voltage controller as needed.
++ */
++ if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
++ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
++ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
++ } else {
++ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
++ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
++ }
++
++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
++ TPS65217_POWER_PATH,
++ usb_cur_lim,
++ TPS65217_USB_INPUT_CUR_LIMIT_MASK))
++ puts("tps65217_reg_write failure\n");
++
++ /* Set DCDC3 (CORE) voltage to 1.125V */
++ if (tps65217_voltage_update(TPS65217_DEFDCDC3,
++ TPS65217_DCDC_VOLT_SEL_1125MV)) {
++ puts("tps65217_voltage_update failure\n");
++ return;
++ }
++
++ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
++ if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
++ puts("tps65217_voltage_update failure\n");
++ return;
++ }
++
++ /* Set LDO3, LDO4 output voltage to 3.3V for GCS1.
++ * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */
++
++ #ifdef CONFIG_CHILISOM_GCS2
++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++ TPS65217_DEFLS1,
++ TPS65217_LDO_VOLTAGE_OUT_1_8,
++ TPS65217_LDO_MASK))
++ puts("tps65217_reg_write failure\n");
++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++ TPS65217_DEFLS2,
++ TPS65217_LDO_VOLTAGE_OUT_3_3,
++ TPS65217_LDO_MASK))
++ puts("tps65217_reg_write failure\n");
++ #else
++
++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++ TPS65217_DEFLS1,
++ TPS65217_LDO_VOLTAGE_OUT_3_3,
++ TPS65217_LDO_MASK))
++ puts("tps65217_reg_write failure\n");
++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
++ TPS65217_DEFLS2,
++ TPS65217_LDO_VOLTAGE_OUT_3_3,
++ TPS65217_LDO_MASK))
++ puts("tps65217_reg_write failure\n");
++ #endif
++
++ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
++}
++
++const struct dpll_params *get_dpll_ddr_params(void)
++{
++ enable_i2c0_pin_mux();
++ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
++
++#ifndef CONFIG_CHILISOM_GCS2
++ return &dpll_ddr_chilisom_gcs1;
++#else
++ return &dpll_ddr_chilisom_gcs2;
++#endif
++}
++
++void set_uart_mux_conf(void)
++{
++#ifdef CONFIG_SERIAL1
++ enable_uart0_pin_mux();
++#endif /* CONFIG_SERIAL1 */
++}
++
++void set_mux_conf_regs(void)
++{
++ enable_board_pin_mux();
++}
++
++const struct ctrl_ioregs ioregs_chilisom_gcs1 = {
++ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
++ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
++ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
++ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
++ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
++};
++
++const struct ctrl_ioregs ioregs_chilisom_gcs2 = {
++ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
++ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
++ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
++ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
++ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
++};
++
++void sdram_init(void)
++{
++#ifndef CONFIG_CHILISOM_GCS2
++ config_ddr(266, &ioregs_chilisom_gcs1,
++ &ddr2_chilisom_gcs1_data,
++ &ddr2_chilisom_gcs1_cmd_ctrl_data,
++ &ddr2_chilisom_gcs1_emif_reg_data, 0);
++#else
++ config_ddr(400, &ioregs_chilisom_gcs2,
++ &ddr3_chilisom_gcs2_data,
++ &ddr3_chilisom_gcs2_cmd_ctrl_data,
++ &ddr3_chilisom_gcs2_emif_reg_data, 0);
++#endif
++}
++#endif
++
++/*
++ * Basic board specific setup. Pinmux has been handled already.
++ */
++int board_init(void)
++{
++#if defined(CONFIG_HW_WATCHDOG)
++ hw_watchdog_init();
++#endif
++
++ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
++#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
++ gpmc_init();
++#endif
++ return 0;
++}
++
++#ifdef CONFIG_BOARD_LATE_INIT
++int board_late_init(void)
++{
++#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
++ char safe_string[HDR_NAME_LEN + 1];
++
++ /* Now set variables based on the header. */
++ strncpy(safe_string, (char *)"CHILISOM", 8);
++ safe_string[8] = 0;
++ setenv("board_name", safe_string);
++
++#ifndef CONFIG_CHILISOM_GCS2
++ strncpy(safe_string, (char *)"1.1", 3);
++ safe_string[3] = 0;
++ setenv("board_rev", safe_string);
++#else
++ strncpy(safe_string, (char *)"2.2", 3);
++ safe_string[3] = 0;
++ setenv("board_rev", safe_string);
++#endif
++#endif
++ return 0;
++}
++#endif
++
++#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
++ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
++static void cpsw_control(int enabled)
++{
++ /* VTP can be added here */
++
++ return;
++}
++
++static struct cpsw_slave_data cpsw_slaves[] = {
++ {
++ .slave_reg_ofs = 0x208,
++ .sliver_reg_ofs = 0xd80,
++ .phy_addr = 0,
++ },
++ {
++ .slave_reg_ofs = 0x308,
++ .sliver_reg_ofs = 0xdc0,
++ .phy_addr = 1,
++ },
++};
++
++static struct cpsw_platform_data cpsw_data = {
++ .mdio_base = CPSW_MDIO_BASE,
++ .cpsw_base = CPSW_BASE,
++ .mdio_div = 0xff,
++ .channels = 8,
++ .cpdma_reg_ofs = 0x800,
++ .slaves = 1,
++ .slave_data = cpsw_slaves,
++ .ale_reg_ofs = 0xd00,
++ .ale_entries = 1024,
++ .host_port_reg_ofs = 0x108,
++ .hw_stats_reg_ofs = 0x900,
++ .bd_ram_ofs = 0x2000,
++ .mac_control = (1 << 5),
++ .control = cpsw_control,
++ .host_port_num = 0,
++ .version = CPSW_CTRL_VERSION_2,
++};
++#endif
++
++/*
++ * This function will:
++ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr
++ * in the environment
++ * Perform fixups to the PHY present on certain boards. We only need this
++ * function in:
++ * - SPL with either CPSW or USB ethernet support
++ * - Full U-Boot, with either CPSW or USB ethernet
++ * Build in only these cases to avoid warnings about unused variables
++ * when we build an SPL that has neither option but full U-Boot will.
++ */
++
++#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
++ && defined(CONFIG_SPL_BUILD)) || \
++ ((defined(CONFIG_DRIVER_TI_CPSW) || \
++ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
++ !defined(CONFIG_SPL_BUILD))
++int board_eth_init(bd_t *bis)
++{
++ int rv, n = 0;
++ uint8_t mac_addr[6];
++ uint32_t mac_hi, mac_lo;
++
++ /* try reading mac address from efuse */
++ mac_lo = readl(&cdev->macid0l);
++ mac_hi = readl(&cdev->macid0h);
++ mac_addr[0] = mac_hi & 0xFF;
++ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
++ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
++ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
++ mac_addr[4] = mac_lo & 0xFF;
++ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
++
++#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
++ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
++ if (!getenv("ethaddr")) {
++ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
++
++ if (is_valid_ether_addr(mac_addr))
++ eth_setenv_enetaddr("ethaddr", mac_addr);
++ }
++
++#ifdef CONFIG_DRIVER_TI_CPSW
++
++ mac_lo = readl(&cdev->macid1l);
++ mac_hi = readl(&cdev->macid1h);
++ mac_addr[0] = mac_hi & 0xFF;
++ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
++ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
++ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
++ mac_addr[4] = mac_lo & 0xFF;
++ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
++
++ if (!getenv("eth1addr")) {
++ if (is_valid_ether_addr(mac_addr))
++ eth_setenv_enetaddr("eth1addr", mac_addr);
++ }
++
++ /* writel(MII_MODE_ENABLE, &cdev->miisel); */
++ writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
++
++ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII;
++
++ rv = cpsw_register(&cpsw_data);
++ if (rv < 0)
++ printf("Error %d registering CPSW switch\n", rv);
++ else
++ n += rv;
++#endif
++#endif
++#if defined(CONFIG_USB_ETHER) && \
++ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
++ if (is_valid_ether_addr(mac_addr))
++ eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
++
++ rv = usb_eth_initialize(bis);
++ if (rv < 0)
++ printf("Error %d registering USB_ETHER\n", rv);
++ else
++ n += rv;
++#endif
++ return n;
++}
++#endif
+diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h
+new file mode 100644
+index 0000000..6753e74
+--- /dev/null
++++ b/board/grinn/chiliboard/board.h
+@@ -0,0 +1,20 @@
++/*
++ * board.h
++ *
++ * Grinn AM335x boards information header
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef _BOARD_H_
++#define _BOARD_H_
++
++void enable_uart0_pin_mux(void);
++void enable_i2c0_pin_mux(void);
++void enable_board_pin_mux(void);
++#endif
+diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c
+new file mode 100644
+index 0000000..644f211
+--- /dev/null
++++ b/board/grinn/chiliboard/mux.c
+@@ -0,0 +1,99 @@
++/*
++ * mux.c
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/mux.h>
++#include <asm/io.h>
++#include <i2c.h>
++#include "board.h"
++
++static struct module_pin_mux uart0_pin_mux[] = {
++ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
++ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
++ {-1},
++};
++
++static struct module_pin_mux mmc0_pin_mux[] = {
++ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
++ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
++ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
++ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
++ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
++ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
++ {-1},
++};
++
++static struct module_pin_mux i2c0_pin_mux[] = {
++ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
++ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
++ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
++ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
++ {-1},
++};
++
++static struct module_pin_mux rmii1_pin_mux[] = {
++ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */
++ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */
++ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */
++ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */
++ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */
++ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */
++ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */
++ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
++ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
++ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */
++ {-1},
++};
++
++static struct module_pin_mux nand_pin_mux[] = {
++ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
++ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
++ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
++ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
++ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
++ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
++ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
++ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
++ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
++ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
++ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
++ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
++ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
++ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
++ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
++ {-1},
++};
++
++void enable_uart0_pin_mux(void)
++{
++ configure_module_pin_mux(uart0_pin_mux);
++}
++
++void enable_i2c0_pin_mux(void)
++{
++ configure_module_pin_mux(i2c0_pin_mux);
++}
++
++void enable_board_pin_mux(void)
++{
++ /* chiliboard pinmux */
++ configure_module_pin_mux(rmii1_pin_mux);
++ configure_module_pin_mux(nand_pin_mux);
++ configure_module_pin_mux(mmc0_pin_mux);
++
++#ifndef CONFIG_CHILISOM_GCS2
++ puts("Configuration for Chilisom GCS1\n");
++#else
++ puts("Configuration for Chilisom GCS2\n");
++#endif
++}
+diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds
+new file mode 100644
+index 0000000..bf70d88
+--- /dev/null
++++ b/board/grinn/chiliboard/u-boot.lds
+@@ -0,0 +1,131 @@
++/*
++ * Copyright (c) 2004-2008 Texas Instruments
++ *
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++ . = 0x00000000;
++
++ . = ALIGN(4);
++ .text :
++ {
++ *(.__image_copy_start)
++ *(.vectors)
++ CPUDIR/start.o (.text*)
++ board/grinn/chiliboard/built-in.o (.text*)
++ *(.text*)
++ }
++
++ . = ALIGN(4);
++ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
++
++ . = ALIGN(4);
++ .data : {
++ *(.data*)
++ }
++
++ . = ALIGN(4);
++
++ . = .;
++
++ . = ALIGN(4);
++ .u_boot_list : {
++ KEEP(*(SORT(.u_boot_list*)));
++ }
++
++ . = ALIGN(4);
++
++ .image_copy_end :
++ {
++ *(.__image_copy_end)
++ }
++
++ .rel_dyn_start :
++ {
++ *(.__rel_dyn_start)
++ }
++
++ .rel.dyn : {
++ *(.rel*)
++ }
++
++ .rel_dyn_end :
++ {
++ *(.__rel_dyn_end)
++ }
++
++ .hash : { *(.hash*) }
++
++ .end :
++ {
++ *(.__end)
++ }
++
++ _image_binary_end = .;
++
++ /*
++ * Deprecated: this MMU section is used by pxa at present but
++ * should not be used by new boards/CPUs.
++ */
++ . = ALIGN(4096);
++ .mmutable : {
++ *(.mmutable)
++ }
++
++/*
++ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
++ * __bss_base and __bss_limit are for linker only (overlay ordering)
++ */
++
++ .bss_start __rel_dyn_start (OVERLAY) : {
++ KEEP(*(.__bss_start));
++ __bss_base = .;
++ }
++
++ .bss __bss_base (OVERLAY) : {
++ *(.bss*)
++ . = ALIGN(4);
++ __bss_limit = .;
++ }
++
++ .bss_end __bss_limit (OVERLAY) : {
++ KEEP(*(.__bss_end));
++ }
++
++ .dynsym _image_binary_end : { *(.dynsym) }
++ .dynbss : { *(.dynbss) }
++ .dynstr : { *(.dynstr*) }
++ .dynamic : { *(.dynamic*) }
++ .gnu.hash : { *(.gnu.hash) }
++ .plt : { *(.plt*) }
++ .interp : { *(.interp*) }
++ .gnu : { *(.gnu*) }
++ .ARM.exidx : { *(.ARM.exidx*) }
++}
+diff --git a/boards.cfg b/boards.cfg
+index 1ba2081..b432704 100644
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -258,6 +258,11 @@ Active arm armv7 am33xx BuR tseries
+ Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier <hannes.petermaier@br-automation.com>
+ Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier <hannes.petermaier@br-automation.com>
+ Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg <grinberg@compulab.co.il>
++Active arm armv7 am33xx grinn chiliboard chiliboard_ram128m chiliboard:CHILISOM_GCS2,NAND,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com>
++Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m_ram128m chiliboard:CHILISOM_GCS2,RAM128MB Grzegorz Glomb <g.glomb@grinn-global.com>
++Active arm armv7 am33xx grinn chiliboard chiliboard_nand512m chiliboard:CHILISOM_GCS2,NAND,NAND512MB Grzegorz Glomb <g.glomb@grinn-global.com>
++Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m chiliboard:CHILISOM_GCS2 Grzegorz Glomb <g.glomb@grinn-global.com>
++Active arm armv7 am33xx grinn chiliboard chiliboard chiliboard:CHILISOM_GCS2,NAND Grzegorz Glomb <g.glomb@grinn-global.com>
+ Active arm armv7 am33xx gumstix pepper pepper - Ash Charles <ash@gumstix.com>
+ Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
+ Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de>
+diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
+index 1acf06b..0c9cde3 100644
+--- a/drivers/mtd/nand/omap_gpmc.c
++++ b/drivers/mtd/nand/omap_gpmc.c
+@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+ oob += eccbytes) {
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ /* read data */
+- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page);
++ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1);
+ chip->read_buf(mtd, p, eccsize);
+
+ /* read respective ecc from oob area */
+- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page);
++ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
+ chip->read_buf(mtd, oob, eccbytes);
+ /* read syndrome */
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
+new file mode 100644
+index 0000000..eacc9af
+--- /dev/null
++++ b/include/configs/chiliboard.h
+@@ -0,0 +1,878 @@
++/*
++ * chiliboard.h
++ *
++ * Grinn chiliboard configuration header
++ *
++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
++ *
++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com
++ * Grzegorz Glomb, g.glomb@grinn-global.com
++ *
++ * SPDX-License-Identifier: GPL-2.0+
++ */
++
++#ifndef __CONFIG_CHILIBOARD_H
++#define __CONFIG_CHILIBOARD_H
++
++#define CONFIG_AM33XX
++#define CONFIG_ARCH_CPU_INIT
++#define CONFIG_SYS_CACHELINE_SIZE 64
++#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
++#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
++#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
++
++#include <asm/arch/omap.h>
++
++/* NS16550 Configuration */
++#define CONFIG_SYS_NS16550
++#define CONFIG_SYS_NS16550_SERIAL
++#define CONFIG_SYS_NS16550_REG_SIZE (-4)
++#define CONFIG_SYS_NS16550_CLK 48000000
++
++/* Network defines. */
++#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
++#define CONFIG_CMD_DHCP
++#define CONFIG_CMD_MII
++#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
++#define CONFIG_BOOTP_DNS2
++#define CONFIG_BOOTP_SEND_HOSTNAME
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_SUBNETMASK
++#define CONFIG_NET_RETRY_COUNT 10
++#define CONFIG_CMD_PING
++#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
++#define CONFIG_MII /* Required in net/eth.c */
++
++/*
++ * RTC related defines. To use bootcount you must set bootlimit in the
++ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
++ * in the board config.
++ */
++#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
++
++/* Enable the HW watchdog, since we can use this with bootcount */
++#define CONFIG_HW_WATCHDOG
++#define CONFIG_OMAP_WATCHDOG
++
++/*
++ * SPL related defines. The Public RAM memory map the ROM defines the
++ * area between 0x402F0400 and 0x4030B800 as a download area and
++ * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
++ * supports X-MODEM loading via UART, and we leverage this and then use
++ * Y-MODEM to load u-boot.img, when booted over UART.
++ */
++#define CONFIG_SPL_TEXT_BASE 0x402F0400
++#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE)
++#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
++ (128 << 20))
++
++/* Enable the watchdog inside of SPL */
++#define CONFIG_SPL_WATCHDOG_SUPPORT
++
++/*
++ * Since SPL did pll and ddr initialization for us,
++ * we don't need to do it twice.
++ */
++#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
++#define CONFIG_SKIP_LOWLEVEL_INIT
++#endif
++
++/*
++ * When building U-Boot such that there is no previous loader
++ * we need to call board_early_init_f. This is taken care of in
++ * s_init when we have SPL used.
++ */
++#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL)
++#define CONFIG_BOARD_EARLY_INIT_F
++#endif
++
++#ifdef CONFIG_NAND
++#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */
++#endif
++
++/* Common define for many platforms. */
++#define CONFIG_OMAP
++#define CONFIG_OMAP_COMMON
++#define CONFIG_SYS_GENERIC_BOARD
++
++/*
++ * We typically do not contain NOR flash. In the cases where we do, we
++ * undefine this later.
++ */
++#define CONFIG_SYS_NO_FLASH
++
++/* Support both device trees and ATAGs. */
++#define CONFIG_OF_LIBFDT
++#define CONFIG_CMDLINE_TAG
++#define CONFIG_SETUP_MEMORY_TAGS
++#define CONFIG_INITRD_TAG
++
++/*
++ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
++ * relocated itself to higher in memory by the time this value is used.
++ * However, set this to a 32MB offset to allow for easier Linux kernel
++ * booting as the default is often used as the kernel load address.
++ */
++#define CONFIG_SYS_LOAD_ADDR 0x82000000
++
++/*
++ * We setup defaults based on constraints from the Linux kernel, which should
++ * also be safe elsewhere. We have the default load at 32MB into DDR (for
++ * the kernel), FDT above 128MB (the maximum location for the end of the
++ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
++ * seen large trees). We say all of this must be within the first 256MB
++ * as that will normally be within the kernel lowmem and thus visible via
++ * bootm_size and we only run on platforms with 256MB or more of memory.
++ */
++#ifdef CONFIG_RAM128MB
++#define DEFAULT_LINUX_BOOT_ENV \
++ "loadaddr=0x82000000\0" \
++ "kernel_addr_r=0x82000000\0" \
++ "fdtaddr=0x84000000\0" \
++ "fdt_addr_r=0x84000000\0" \
++ "rdaddr=0x84080000\0" \
++ "ramdisk_addr_r=0x84080000\0" \
++ "bootm_size=0x8000000\0"
++#else
++#define DEFAULT_LINUX_BOOT_ENV \
++ "loadaddr=0x82000000\0" \
++ "kernel_addr_r=0x82000000\0" \
++ "fdtaddr=0x88000000\0" \
++ "fdt_addr_r=0x88000000\0" \
++ "rdaddr=0x88080000\0" \
++ "ramdisk_addr_r=0x88080000\0" \
++ "bootm_size=0x10000000\0"
++#endif
++
++/*
++ * Default to a quick boot delay.
++ */
++#define CONFIG_BOOTDELAY 1
++
++/*
++ * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined,
++ * we say (for simplicity) that we have 1 bank, always, even when
++ * we have more. We always start at 0x80000000, and we place the
++ * initial stack pointer in our SRAM. Otherwise, we can define
++ * CONFIG_NR_DRAM_BANKS before including this file.
++ */
++#ifndef CONFIG_NR_DRAM_BANKS
++#define CONFIG_NR_DRAM_BANKS 1
++#endif
++#define CONFIG_SYS_SDRAM_BASE 0x80000000
++#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
++ GENERATED_GBL_DATA_SIZE)
++
++/* Timer information. */
++#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
++
++/* I2C IP block */
++#define CONFIG_I2C
++#define CONFIG_CMD_I2C
++#define CONFIG_SYS_I2C
++#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
++#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
++#define CONFIG_SYS_I2C_OMAP24XX
++
++/* MMC/SD IP block */
++#define CONFIG_MMC
++#define CONFIG_GENERIC_MMC
++#define CONFIG_OMAP_HSMMC
++#define CONFIG_CMD_MMC
++
++/* McSPI IP block */
++#define CONFIG_SPI
++#define CONFIG_OMAP3_SPI
++#define CONFIG_CMD_SPI
++
++/* GPIO block */
++#define CONFIG_OMAP_GPIO
++#define CONFIG_CMD_GPIO
++
++/*
++ * GPMC NAND block. We support 1 device and the physical address to
++ * access CS0 at is 0x8000000.
++ */
++#ifdef CONFIG_NAND
++#define CONFIG_NAND_OMAP_GPMC
++#ifndef CONFIG_SYS_NAND_BASE
++#define CONFIG_SYS_NAND_BASE 0x8000000
++#endif
++#define CONFIG_SYS_MAX_NAND_DEVICE 1
++#define CONFIG_CMD_NAND
++#endif
++
++/*
++ * The following are general good-enough settings for U-Boot. We set a
++ * large malloc pool as we generally have a lot of DDR, and we opt for
++ * function over binary size in the main portion of U-Boot as this is
++ * generally easily constrained later if needed. We enable the config
++ * options that give us information in the environment about what board
++ * we are on so we do not need to rely on the command prompt. We set a
++ * console baudrate of 115200 and use the default baud rate table.
++ */
++#define CONFIG_SYS_MALLOC_LEN (16 << 20)
++#define CONFIG_SYS_HUSH_PARSER
++#define CONFIG_SYS_PROMPT "U-Boot# "
++#define CONFIG_SYS_CONSOLE_INFO_QUIET
++#define CONFIG_BAUDRATE 115200
++#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */
++#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */
++
++/* As stated above, the following choices are optional. */
++#define CONFIG_SYS_LONGHELP
++#define CONFIG_AUTO_COMPLETE
++#define CONFIG_CMDLINE_EDITING
++#define CONFIG_VERSION_VARIABLE
++
++/* We set the max number of command args high to avoid HUSH bugs. */
++#define CONFIG_SYS_MAXARGS 64
++
++/* Console I/O Buffer Size */
++#define CONFIG_SYS_CBSIZE 512
++/* Print Buffer Size */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
++ + sizeof(CONFIG_SYS_PROMPT) + 16)
++/* Boot Argument Buffer Size */
++#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
++
++/*
++ * When we have SPI, NOR or NAND flash we expect to be making use of
++ * mtdparts, both for ease of use in U-Boot and for passing information
++ * on to the Linux kernel.
++ */
++#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND)
++#define CONFIG_MTD_DEVICE /* Required for mtdparts */
++#define CONFIG_CMD_MTDPARTS
++#endif
++
++/*
++ * For commands to use, we take the default list and add a few other
++ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH
++ * prior to this include, in order to skip a few commands. When we do
++ * have flash, if we expect these commands they must be enabled in that
++ * config. If desired, a specific list of desired commands can be used
++ * instead.
++ */
++#include <config_cmd_default.h>
++#define CONFIG_CMD_ASKENV
++#define CONFIG_CMD_ECHO
++#define CONFIG_CMD_BOOTZ
++
++/*
++ * Common filesystems support. When we have removable storage we
++ * enabled a number of useful commands and support.
++ */
++#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
++#define CONFIG_DOS_PARTITION
++#define CONFIG_CMD_FAT
++#define CONFIG_FAT_WRITE
++#define CONFIG_CMD_EXT2
++#define CONFIG_CMD_EXT4
++#define CONFIG_CMD_FS_GENERIC
++#endif
++
++/*
++ * Our platforms make use of SPL to initalize the hardware (primarily
++ * memory) enough for full U-Boot to be loaded. We also support Falcon
++ * Mode so that the Linux kernel can be booted directly from SPL
++ * instead, if desired. We make use of the general SPL framework found
++ * under common/spl/. Given our generally common memory map, we set a
++ * number of related defaults and sizes here.
++ */
++#if !defined(CONFIG_NOR_BOOT) && \
++ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX))
++#define CONFIG_SPL
++#define CONFIG_SPL_FRAMEWORK
++#define CONFIG_SPL_OS_BOOT
++
++/*
++ * Place the image at the start of the ROM defined image space.
++ * We limit our size to the ROM-defined downloaded image area, and use the
++ * rest of the space for stack. We load U-Boot itself into memory at
++ * 0x80800000 for legacy reasons (to not conflict with older SPLs). We
++ * have our BSS be placed 1MiB after this, to allow for the default
++ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case.
++ * We have the SPL malloc pool at the end of the BSS area.
++ */
++#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
++#ifndef CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_TEXT_BASE 0x80800000
++#endif
++#ifndef CONFIG_SPL_BSS_START_ADDR
++#define CONFIG_SPL_BSS_START_ADDR 0x80a00000
++#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
++#endif
++#ifndef CONFIG_SYS_SPL_MALLOC_START
++#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
++ CONFIG_SPL_BSS_MAX_SIZE)
++#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
++#endif
++
++/* RAW SD card / eMMC locations. */
++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
++
++/* FAT sd card locations. */
++#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
++#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
++
++#ifdef CONFIG_SPL_OS_BOOT
++/* FAT */
++#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage"
++#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args"
++
++/* RAW SD card / eMMC */
++#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */
++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */
++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */
++
++/* NAND */
++#ifdef CONFIG_NAND
++#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */
++#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
++#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
++#endif
++
++/* spl export command */
++#define CONFIG_CMD_SPL
++#endif
++
++#ifdef CONFIG_MMC
++#define CONFIG_SPL_LIBDISK_SUPPORT
++#define CONFIG_SPL_MMC_SUPPORT
++#define CONFIG_SPL_FAT_SUPPORT
++#endif
++
++/* General parts of the framework, required. */
++#define CONFIG_SPL_I2C_SUPPORT
++#define CONFIG_SPL_LIBCOMMON_SUPPORT
++#define CONFIG_SPL_LIBGENERIC_SUPPORT
++#define CONFIG_SPL_SERIAL_SUPPORT
++#define CONFIG_SPL_GPIO_SUPPORT
++#define CONFIG_SPL_BOARD_INIT
++
++#ifdef CONFIG_NAND
++#define CONFIG_SPL_NAND_SUPPORT
++#define CONFIG_SPL_NAND_BASE
++#define CONFIG_SPL_NAND_DRIVERS
++#define CONFIG_SPL_NAND_ECC
++#define CONFIG_SPL_MTD_SUPPORT
++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
++/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ /* Defined later in this configuration */
++#endif
++#endif /* !CONFIG_NOR_BOOT */
++
++#ifndef CONFIG_SPL_BUILD
++# define CONFIG_FIT
++# define CONFIG_TIMESTAMP
++# define CONFIG_LZO
++# ifdef CONFIG_ENABLE_VBOOT
++# define CONFIG_OF_CONTROL
++# define CONFIG_OF_SEPARATE
++# define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard
++# define CONFIG_FIT_SIGNATURE
++# define CONFIG_RSA
++# endif
++#endif
++
++#define CONFIG_SYS_BOOTM_LEN (16 << 20)
++
++#define CONFIG_BOARD_LATE_INIT
++
++#define CONFIG_SERIAL1 1
++#define CONFIG_CONS_INDEX 1
++
++/* Clock Defines */
++#define V_OSCK 24000000 /* Clock output from T2 */
++#define V_SCLK (V_OSCK)
++
++/* Custom script for NOR */
++#define CONFIG_SYS_LDSCRIPT "board/grinn/chiliboard/u-boot.lds"
++
++/* Always 128 KiB env size */
++#define CONFIG_ENV_SIZE (128 << 10)
++
++/* Enhance our eMMC support / experience. */
++#define CONFIG_CMD_GPT
++#define CONFIG_EFI_PARTITION
++#define CONFIG_PARTITION_UUIDS
++#define CONFIG_CMD_PART
++
++#ifdef CONFIG_NAND
++#ifndef CONFIG_NAND512MB
++#define NANDARGS \
++ "mtdids=" MTDIDS_DEFAULT "\0" \
++ "mtdparts=" MTDPARTS_DEFAULT "\0" \
++ "nandargs=setenv bootargs console=${console} " \
++ "${optargs} " \
++ "root=${nandroot} " \
++ "rootfstype=${nandrootfstype}\0" \
++ "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \
++ "nandrootfstype=ubifs rootwait=1\0" \
++ "nandboot=echo Booting from nand ...; " \
++ "run nandargs; " \
++ "nand read ${fdtaddr} u-boot-spl-os; " \
++ "nand read ${loadaddr} kernel; " \
++ "bootz ${loadaddr} - ${fdtaddr}\0"
++#else
++#define NANDARGS \
++ "mtdids=" MTDIDS_DEFAULT "\0" \
++ "mtdparts=" MTDPARTS_DEFAULT "\0" \
++ "nandargs=setenv bootargs console=${console} " \
++ "${optargs} " \
++ "root=${nandroot} " \
++ "rootfstype=${nandrootfstype}\0" \
++ "nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \
++ "nandrootfstype=ubifs rootwait=1\0" \
++ "nandboot=echo Booting from nand ...; " \
++ "run nandargs; " \
++ "nand read ${fdtaddr} u-boot-spl-os; " \
++ "nand read ${loadaddr} kernel; " \
++ "bootz ${loadaddr} - ${fdtaddr}\0"
++#endif
++#else
++#define NANDARGS ""
++#endif
++
++#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
++
++#ifndef CONFIG_SPL_BUILD
++#define CONFIG_EXTRA_ENV_SETTINGS \
++ DEFAULT_LINUX_BOOT_ENV \
++ "boot_fdt=try\0" \
++ "bootpart=0:2\0" \
++ "bootdir=/boot\0" \
++ "bootfile=zImage\0" \
++ "fdtfile=undefined\0" \
++ "console=ttyO0,115200n8\0" \
++ "partitions=" \
++ "uuid_disk=${uuid_gpt_disk};" \
++ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
++ "optargs=\0" \
++ "mmcdev=0\0" \
++ "mmcroot=/dev/mmcblk0p2 rw\0" \
++ "mmcrootfstype=ext4 rootwait\0" \
++ "rootpath=/export/rootfs\0" \
++ "nfsopts=nolock\0" \
++ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
++ "::off\0" \
++ "ramroot=/dev/ram0 rw\0" \
++ "ramrootfstype=ext2\0" \
++ "mmcargs=setenv bootargs console=${console} " \
++ "${optargs} " \
++ "root=${mmcroot} " \
++ "rootfstype=${mmcrootfstype}\0" \
++ "spiroot=/dev/mtdblock4 rw\0" \
++ "spirootfstype=jffs2\0" \
++ "spisrcaddr=0xe0000\0" \
++ "spiimgsize=0x362000\0" \
++ "spibusno=0\0" \
++ "spiargs=setenv bootargs console=${console} " \
++ "${optargs} " \
++ "root=${spiroot} " \
++ "rootfstype=${spirootfstype}\0" \
++ "netargs=setenv bootargs console=${console} " \
++ "${optargs} " \
++ "root=/dev/nfs " \
++ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
++ "ip=dhcp\0" \
++ "bootenv=uEnv.txt\0" \
++ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
++ "importbootenv=echo Importing environment from mmc ...; " \
++ "env import -t $loadaddr $filesize\0" \
++ "ramargs=setenv bootargs console=${console} " \
++ "${optargs} " \
++ "root=${ramroot} " \
++ "rootfstype=${ramrootfstype}\0" \
++ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
++ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
++ "mmcloados=run mmcargs; " \
++ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
++ "if run loadfdt; then " \
++ "bootz ${loadaddr} - ${fdtaddr}; " \
++ "else " \
++ "if test ${boot_fdt} = try; then " \
++ "bootz; " \
++ "else " \
++ "echo WARN: Cannot load the DT; " \
++ "fi; " \
++ "fi; " \
++ "else " \
++ "bootz; " \
++ "fi;\0" \
++ "mmcboot=mmc dev ${mmcdev}; " \
++ "if mmc rescan; then " \
++ "echo SD/MMC found on device ${mmcdev};" \
++ "if run loadbootenv; then " \
++ "echo Loaded environment from ${bootenv};" \
++ "run importbootenv;" \
++ "fi;" \
++ "if test -n $uenvcmd; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "if run loadimage; then " \
++ "run mmcloados;" \
++ "fi;" \
++ "fi;\0" \
++ "spiboot=echo Booting from spi ...; " \
++ "run spiargs; " \
++ "sf probe ${spibusno}:0; " \
++ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
++ "bootz ${loadaddr}\0" \
++ "netboot=echo Booting from network ...; " \
++ "setenv autoload no; " \
++ "dhcp; " \
++ "tftp ${loadaddr} ${bootfile}; " \
++ "tftp ${fdtaddr} ${fdtfile}; " \
++ "run netargs; " \
++ "bootz ${loadaddr} - ${fdtaddr}\0" \
++ "ramboot=echo Booting from ramdisk ...; " \
++ "run ramargs; " \
++ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
++ "findfdt="\
++ "setenv fdtfile am335x-chiliboard.dtb;\0" \
++ NANDARGS \
++ DFUARGS
++#endif
++
++#define CONFIG_BOOTCOMMAND \
++ "run findfdt; " \
++ "run mmcboot;" \
++ "setenv mmcdev 1; " \
++ "setenv bootpart 1:2; " \
++ "run mmcboot;" \
++ "run nandboot;"
++
++/* NS16550 Configuration */
++#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
++#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
++#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
++#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
++#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
++#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
++#define CONFIG_BAUDRATE 115200
++
++/*
++#define CONFIG_CMD_EEPROM
++#define CONFIG_ENV_EEPROM_IS_ON_I2C
++#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
++#define CONFIG_SYS_I2C_MULTI_EEPROMS
++*/
++
++/* PMIC support */
++#define CONFIG_POWER_TPS65217
++/* #define CONFIG_POWER_TPS65910 */
++
++/* SPL */
++#ifndef CONFIG_NOR_BOOT
++#define CONFIG_SPL_POWER_SUPPORT
++#define CONFIG_SPL_YMODEM_SUPPORT
++
++/* Bootcount using the RTC block */
++#define CONFIG_BOOTCOUNT_LIMIT
++#define CONFIG_BOOTCOUNT_AM33XX
++
++/* USB gadget RNDIS */
++#define CONFIG_SPL_MUSB_NEW_SUPPORT
++
++/* General network SPL, both CPSW and USB gadget RNDIS */
++#define CONFIG_SPL_NET_SUPPORT
++#define CONFIG_SPL_ENV_SUPPORT
++#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
++
++#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
++
++#ifdef CONFIG_NAND
++#define CONFIG_NAND_OMAP_GPMC
++#define CONFIG_NAND_OMAP_ELM
++#define CONFIG_SYS_NAND_5_ADDR_CYCLE
++#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
++ CONFIG_SYS_NAND_PAGE_SIZE)
++
++#ifndef CONFIG_NAND512MB
++#define CONFIG_SYS_NAND_PAGE_SIZE 2048
++#define CONFIG_SYS_NAND_OOBSIZE 64
++#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
++ 10, 11, 12, 13, 14, 15, 16, 17, \
++ 18, 19, 20, 21, 22, 23, 24, 25, \
++ 26, 27, 28, 29, 30, 31, 32, 33, \
++ 34, 35, 36, 37, 38, 39, 40, 41, \
++ 42, 43, 44, 45, 46, 47, 48, 49, \
++ 50, 51, 52, 53, 54, 55, 56, 57, }
++
++#define CONFIG_SYS_NAND_ECCSIZE 512
++#define CONFIG_SYS_NAND_ECCBYTES 14
++#define CONFIG_SYS_NAND_ONFI_DETECTION
++#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
++#else
++#define CONFIG_SYS_NAND_PAGE_SIZE 4096
++#define CONFIG_SYS_NAND_OOBSIZE 224
++#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024)
++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
++#define CONFIG_SYS_NAND_ECCPOS {\
++ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\
++ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\
++ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\
++ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\
++ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\
++ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\
++ 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\
++ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\
++ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\
++ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\
++ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\
++ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\
++ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\
++ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\
++ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\
++ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\
++ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\
++ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\
++ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
++
++#define CONFIG_SYS_NAND_ECCSIZE 512
++#define CONFIG_SYS_NAND_ECCBYTES 26
++#define CONFIG_SYS_NAND_ONFI_DETECTION
++#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW
++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x100000
++#endif
++
++#endif
++#endif
++
++/*
++ * For NOR boot, we must set this to the start of where NOR is mapped
++ * in memory.
++ */
++#ifdef CONFIG_NOR_BOOT
++#define CONFIG_SYS_TEXT_BASE 0x08000000
++#endif
++
++/*
++ * USB configuration. We enable MUSB support, both for host and for
++ * gadget. We set USB0 as peripheral and USB1 as host, based on the
++ * board schematic and physical port wired to each. Then for host we
++ * add mass storage support and for gadget we add both RNDIS ethernet
++ * and DFU.
++ */
++#define CONFIG_USB_MUSB_DSPS
++#define CONFIG_ARCH_MISC_INIT
++#define CONFIG_MUSB_GADGET
++#define CONFIG_MUSB_PIO_ONLY
++#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
++#define CONFIG_USB_GADGET
++#define CONFIG_USBDOWNLOAD_GADGET
++#define CONFIG_USB_GADGET_DUALSPEED
++#define CONFIG_USB_GADGET_VBUS_DRAW 2
++#define CONFIG_MUSB_HOST
++#define CONFIG_AM335X_USB0
++#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
++#define CONFIG_AM335X_USB1
++#define CONFIG_AM335X_USB1_MODE MUSB_HOST
++
++#ifdef CONFIG_MUSB_HOST
++#define CONFIG_CMD_USB
++#define CONFIG_USB_STORAGE
++#endif
++
++#ifdef CONFIG_MUSB_GADGET
++#define CONFIG_USB_ETHER
++#define CONFIG_USB_ETH_RNDIS
++#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
++
++/* USB TI's IDs */
++#define CONFIG_G_DNL_VENDOR_NUM 0x0403
++#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
++#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
++#endif /* CONFIG_MUSB_GADGET */
++
++#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
++/* disable host part of MUSB in SPL */
++#undef CONFIG_MUSB_HOST
++/* disable EFI partitions and partition UUID support */
++#undef CONFIG_PARTITION_UUIDS
++#undef CONFIG_EFI_PARTITION
++/*
++ * Disable CPSW SPL support so we fit within the 101KiB limit.
++ */
++#undef CONFIG_SPL_ETH_SUPPORT
++#endif
++
++/* USB Device Firmware Update support */
++#ifndef CONFIG_SPL_BUILD
++#define CONFIG_DFU_FUNCTION
++#define CONFIG_DFU_MMC
++#define CONFIG_CMD_DFU
++#define DFU_ALT_INFO_MMC \
++ "dfu_alt_info_mmc=" \
++ "boot part 0 1;" \
++ "rootfs part 0 2;" \
++ "MLO fat 0 1;" \
++ "MLO.raw mmc 0x100 0x100;" \
++ "u-boot.img.raw mmc 0x300 0x400;" \
++ "spl-os-args.raw mmc 0x80 0x80;" \
++ "spl-os-image.raw mmc 0x900 0x2000;" \
++ "spl-os-args fat 0 1;" \
++ "spl-os-image fat 0 1;" \
++ "u-boot.img fat 0 1;" \
++ "uEnv.txt fat 0 1\0"
++#ifdef CONFIG_NAND
++#define CONFIG_DFU_NAND
++#define DFU_ALT_INFO_NAND \
++ "dfu_alt_info_nand=" \
++ "SPL part 0 1;" \
++ "SPL.backup1 part 0 2;" \
++ "SPL.backup2 part 0 3;" \
++ "SPL.backup3 part 0 4;" \
++ "u-boot part 0 5;" \
++ "u-boot-spl-os part 0 6;" \
++ "kernel part 0 8;" \
++ "rootfs part 0 9\0"
++#else
++#define DFU_ALT_INFO_NAND ""
++#endif
++#define CONFIG_DFU_RAM
++#define DFU_ALT_INFO_RAM \
++ "dfu_alt_info_ram=" \
++ "kernel ram 0x80200000 0xD80000;" \
++ "fdt ram 0x80F80000 0x80000;" \
++ "ramdisk ram 0x81000000 0x4000000\0"
++#define DFUARGS \
++ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \
++ DFU_ALT_INFO_MMC \
++ DFU_ALT_INFO_RAM \
++ DFU_ALT_INFO_NAND
++#endif
++
++/*
++ * Default to using SPI for environment, etc.
++ * 0x000000 - 0x020000 : SPL (128KiB)
++ * 0x020000 - 0x0A0000 : U-Boot (512KiB)
++ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB)
++ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB)
++ * 0x0E0000 - 0x442000 : Linux Kernel
++ * 0x442000 - 0x800000 : Userland
++ */
++#if defined(CONFIG_SPI_BOOT)
++/* SPL related */
++#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */
++#define CONFIG_SPL_SPI_SUPPORT
++#define CONFIG_SPL_SPI_FLASH_SUPPORT
++#define CONFIG_SPL_SPI_LOAD
++#define CONFIG_SPL_SPI_BUS 0
++#define CONFIG_SPL_SPI_CS 0
++#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
++
++#define CONFIG_ENV_IS_IN_SPI_FLASH
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
++#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
++#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */
++#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */
++#define MTDIDS_DEFAULT "nor0=m25p80-flash.0"
++#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \
++ "512k(u-boot),128k(u-boot-env1)," \
++ "128k(u-boot-env2),3464k(kernel)," \
++ "-(rootfs)"
++#elif defined(CONFIG_EMMC_BOOT)
++#undef CONFIG_ENV_IS_NOWHERE
++#define CONFIG_ENV_IS_IN_MMC
++#define CONFIG_SYS_MMC_ENV_DEV 1
++#define CONFIG_SYS_MMC_ENV_PART 2
++#define CONFIG_ENV_OFFSET 0x0
++#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
++#endif
++
++/* SPI flash. */
++#define CONFIG_CMD_SF
++#define CONFIG_SPI_FLASH
++#define CONFIG_SPI_FLASH_WINBOND
++#define CONFIG_SF_DEFAULT_SPEED 24000000
++
++/* Network. */
++#define CONFIG_PHY_GIGE
++#define CONFIG_PHYLIB
++#define CONFIG_PHY_SMSC
++
++/* NAND support */
++#ifdef CONFIG_NAND
++#define CONFIG_CMD_NAND
++#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
++#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
++
++#ifndef CONFIG_NAND512MB
++#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \
++ "128k(SPL.backup1)," \
++ "128k(SPL.backup2)," \
++ "128k(SPL.backup3),1792k(u-boot)," \
++ "128k(u-boot-spl-os)," \
++ "128k(u-boot-env),5m(kernel),-(rootfs)"
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
++#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
++#else
++#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:256k(SPL)," \
++ "256k(SPL.backup1)," \
++ "256k(SPL.backup2)," \
++ "256k(SPL.backup3),2048k(u-boot)," \
++ "256k(u-boot-spl-os)," \
++ "256k(u-boot-env),5m(kernel),-(rootfs)"
++#define CONFIG_ENV_IS_IN_NAND
++#define CONFIG_ENV_OFFSET 0x340000 /* environment starts here */
++#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
++#endif
++
++#endif
++#endif
++
++/*
++ * NOR Size = 16 MiB
++ * Number of Sectors/Blocks = 128
++ * Sector Size = 128 KiB
++ * Word length = 16 bits
++ * Default layout:
++ * 0x000000 - 0x07FFFF : U-Boot (512 KiB)
++ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB)
++ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB)
++ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB)
++ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB)
++ */
++#if defined(CONFIG_NOR)
++#undef CONFIG_SYS_NO_FLASH
++#define CONFIG_CMD_FLASH
++#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
++#define CONFIG_SYS_FLASH_PROTECTION
++#define CONFIG_SYS_FLASH_CFI
++#define CONFIG_FLASH_CFI_DRIVER
++#define CONFIG_FLASH_CFI_MTD
++#define CONFIG_SYS_MAX_FLASH_SECT 128
++#define CONFIG_SYS_MAX_FLASH_BANKS 1
++#define CONFIG_SYS_FLASH_BASE (0x08000000)
++#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
++#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
++/* Reduce SPL size by removing unlikey targets */
++#ifdef CONFIG_NOR_BOOT
++#define CONFIG_ENV_IS_IN_FLASH
++#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
++#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */
++#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */
++#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
++#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
++ "512k(u-boot)," \
++ "128k(u-boot-env1)," \
++ "128k(u-boot-env2)," \
++ "4m(kernel),-(rootfs)"
++#endif
++#endif /* NOR support */
++
++#endif /* ! __CONFIG_CHILISOM_H */
+--
+2.5.0
+
diff --git a/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch
new file mode 100644
index 000000000..81d52444e
--- /dev/null
+++ b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch
@@ -0,0 +1,177 @@
+diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
+index eacc9af..137ce89 100644
+--- a/include/configs/chiliboard.h
++++ b/include/configs/chiliboard.h
+@@ -124,7 +124,6 @@
+ * as that will normally be within the kernel lowmem and thus visible via
+ * bootm_size and we only run on platforms with 256MB or more of memory.
+ */
+-#ifdef CONFIG_RAM128MB
+ #define DEFAULT_LINUX_BOOT_ENV \
+ "loadaddr=0x82000000\0" \
+ "kernel_addr_r=0x82000000\0" \
+@@ -133,16 +132,6 @@
+ "rdaddr=0x84080000\0" \
+ "ramdisk_addr_r=0x84080000\0" \
+ "bootm_size=0x8000000\0"
+-#else
+-#define DEFAULT_LINUX_BOOT_ENV \
+- "loadaddr=0x82000000\0" \
+- "kernel_addr_r=0x82000000\0" \
+- "fdtaddr=0x88000000\0" \
+- "fdt_addr_r=0x88000000\0" \
+- "rdaddr=0x88080000\0" \
+- "ramdisk_addr_r=0x88080000\0" \
+- "bootm_size=0x10000000\0"
+-#endif
+
+ /*
+ * Default to a quick boot delay.
+@@ -258,6 +247,7 @@
+ #define CONFIG_CMD_ASKENV
+ #define CONFIG_CMD_ECHO
+ #define CONFIG_CMD_BOOTZ
++#define CONFIG_SUPPORT_RAW_INITRD
+
+ /*
+ * Common filesystems support. When we have removable storage we
+@@ -398,6 +388,9 @@
+ #define CONFIG_EFI_PARTITION
+ #define CONFIG_PARTITION_UUIDS
+ #define CONFIG_CMD_PART
++#define CONFIG_CMD_SETEXPR
++
++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
+
+ #ifdef CONFIG_NAND
+ #ifndef CONFIG_NAND512MB
+@@ -441,18 +434,16 @@
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+ "boot_fdt=try\0" \
+- "bootpart=0:2\0" \
++ "bootpart=0:1\0" \
+ "bootdir=/boot\0" \
+- "bootfile=zImage\0" \
+- "fdtfile=undefined\0" \
++ "fdtdir=/boot/dtbs/linux-libre\0" \
++ "bootfile=vmlinuz-linux-libre\0" \
++ "fdtfile=\0" \
+ "console=ttyO0,115200n8\0" \
+ "partitions=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ "optargs=\0" \
+- "mmcdev=0\0" \
+- "mmcroot=/dev/mmcblk0p2 rw\0" \
+- "mmcrootfstype=ext4 rootwait\0" \
+ "rootpath=/export/rootfs\0" \
+ "nfsopts=nolock\0" \
+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+@@ -461,8 +452,7 @@
+ "ramrootfstype=ext2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+- "root=${mmcroot} " \
+- "rootfstype=${mmcrootfstype}\0" \
++ "root=${root}\0" \
+ "spiroot=/dev/mtdblock4 rw\0" \
+ "spirootfstype=jffs2\0" \
+ "spisrcaddr=0xe0000\0" \
+@@ -477,46 +467,47 @@
+ "root=/dev/nfs " \
+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+ "ip=dhcp\0" \
+- "bootenv=uEnv.txt\0" \
+- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+- "importbootenv=echo Importing environment from mmc ...; " \
+- "env import -t $loadaddr $filesize\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+- "mmcloados=run mmcargs; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if run loadfdt; then " \
+- "bootz ${loadaddr} - ${fdtaddr}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+- "mmcboot=mmc dev ${mmcdev}; " \
+- "if mmc rescan; then " \
+- "echo SD/MMC found on device ${mmcdev};" \
+- "if run loadbootenv; then " \
+- "echo Loaded environment from ${bootenv};" \
+- "run importbootenv;" \
+- "fi;" \
+- "if test -n $uenvcmd; then " \
+- "echo Running uenvcmd ...;" \
+- "run uenvcmd;" \
+- "fi;" \
+- "if run loadimage; then " \
+- "run mmcloados;" \
+- "fi;" \
+- "fi;\0" \
++ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
++ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++ "mmcboot=for devtype in mmc; do " \
++ "for devnum in 0 1; do " \
++ "if ${devtype} dev ${devnum}; then " \
++ "echo ${devtype} found on device ${devnum};" \
++ "setenv bootpart ${devnum}:1;" \
++ "part uuid ${devtype} ${bootpart} uuid;" \
++ "setenv root PARTUUID=${uuid} rw rootwait;" \
++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
++ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
++ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
++ "env import -t ${loadaddr} ${filesize};" \
++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
++ "echo Checking if uenvcmd is set ...;" \
++ "if test -n ${uenvcmd}; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "fi;" \
++ "if run loadimage; then " \
++ "run mmcargs;" \
++ "if run loadfdt; then " \
++ "if run loadrd; then " \
++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++ "else " \
++ "bootz ${loadaddr} - ${fdtaddr};" \
++ "fi;" \
++ "fi;" \
++ "else " \
++ "echo No kernel found;" \
++ "fi;" \
++ "setexpr devnum ${devnum} + 1;" \
++ "fi;" \
++ "done;" \
++ "done;\0" \
+ "spiboot=echo Booting from spi ...; " \
+ "run spiargs; " \
+ "sf probe ${spibusno}:0; " \
+@@ -541,9 +532,6 @@
+ #define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+ "run mmcboot;" \
+- "setenv mmcdev 1; " \
+- "setenv bootpart 1:2; " \
+- "run mmcboot;" \
+ "run nandboot;"
+
+ /* NS16550 Configuration */
+--
+2.5.0
+
diff --git a/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new
new file mode 100644
index 000000000..391fc504a
--- /dev/null
+++ b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new
@@ -0,0 +1,174 @@
+diff --git a/u-boot-2014.07.orig/include/configs/chiliboard.h b/u-boot-2014.07/include/configs/chiliboard.h
+index eacc9af..137ce89 100644
+--- a/u-boot-2014.07.orig/include/configs/chiliboard.h
++++ b/u-boot-2014.07/include/configs/chiliboard.h
+@@ -124,7 +124,6 @@
+ * as that will normally be within the kernel lowmem and thus visible via
+ * bootm_size and we only run on platforms with 256MB or more of memory.
+ */
+-#ifdef CONFIG_RAM128MB
+ #define DEFAULT_LINUX_BOOT_ENV \
+ "loadaddr=0x82000000\0" \
+ "kernel_addr_r=0x82000000\0" \
+@@ -133,16 +132,6 @@
+ "rdaddr=0x84080000\0" \
+ "ramdisk_addr_r=0x84080000\0" \
+ "bootm_size=0x8000000\0"
+-#else
+-#define DEFAULT_LINUX_BOOT_ENV \
+- "loadaddr=0x82000000\0" \
+- "kernel_addr_r=0x82000000\0" \
+- "fdtaddr=0x88000000\0" \
+- "fdt_addr_r=0x88000000\0" \
+- "rdaddr=0x88080000\0" \
+- "ramdisk_addr_r=0x88080000\0" \
+- "bootm_size=0x10000000\0"
+-#endif
+
+ /*
+ * Default to a quick boot delay.
+@@ -258,6 +247,7 @@
+ #define CONFIG_CMD_ASKENV
+ #define CONFIG_CMD_ECHO
+ #define CONFIG_CMD_BOOTZ
++#define CONFIG_SUPPORT_RAW_INITRD
+
+ /*
+ * Common filesystems support. When we have removable storage we
+@@ -398,6 +388,9 @@
+ #define CONFIG_EFI_PARTITION
+ #define CONFIG_PARTITION_UUIDS
+ #define CONFIG_CMD_PART
++#define CONFIG_CMD_SETEXPR
++
++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
+
+ #ifdef CONFIG_NAND
+ #ifndef CONFIG_NAND512MB
+@@ -441,18 +434,16 @@
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+ "boot_fdt=try\0" \
+- "bootpart=0:2\0" \
++ "bootpart=0:1\0" \
+ "bootdir=/boot\0" \
+- "bootfile=zImage\0" \
+- "fdtfile=undefined\0" \
++ "fdtdir=/boot/dtbs/linux-libre\0" \
++ "bootfile=vmlinuz-linux-libre\0" \
++ "fdtfile=\0" \
+ "console=ttyO0,115200n8\0" \
+ "partitions=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ "optargs=\0" \
+- "mmcdev=0\0" \
+- "mmcroot=/dev/mmcblk0p2 rw\0" \
+- "mmcrootfstype=ext4 rootwait\0" \
+ "rootpath=/export/rootfs\0" \
+ "nfsopts=nolock\0" \
+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+@@ -461,8 +452,7 @@
+ "ramrootfstype=ext2\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+- "root=${mmcroot} " \
+- "rootfstype=${mmcrootfstype}\0" \
++ "root=${root}\0" \
+ "spiroot=/dev/mtdblock4 rw\0" \
+ "spirootfstype=jffs2\0" \
+ "spisrcaddr=0xe0000\0" \
+@@ -477,46 +467,47 @@
+ "root=/dev/nfs " \
+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+ "ip=dhcp\0" \
+- "bootenv=uEnv.txt\0" \
+- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+- "importbootenv=echo Importing environment from mmc ...; " \
+- "env import -t $loadaddr $filesize\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+- "mmcloados=run mmcargs; " \
+- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+- "if run loadfdt; then " \
+- "bootz ${loadaddr} - ${fdtaddr}; " \
+- "else " \
+- "if test ${boot_fdt} = try; then " \
+- "bootz; " \
+- "else " \
+- "echo WARN: Cannot load the DT; " \
+- "fi; " \
+- "fi; " \
+- "else " \
+- "bootz; " \
+- "fi;\0" \
+- "mmcboot=mmc dev ${mmcdev}; " \
+- "if mmc rescan; then " \
+- "echo SD/MMC found on device ${mmcdev};" \
+- "if run loadbootenv; then " \
+- "echo Loaded environment from ${bootenv};" \
+- "run importbootenv;" \
+- "fi;" \
+- "if test -n $uenvcmd; then " \
+- "echo Running uenvcmd ...;" \
+- "run uenvcmd;" \
+- "fi;" \
+- "if run loadimage; then " \
+- "run mmcloados;" \
+- "fi;" \
+- "fi;\0" \
++ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
++ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++ "mmcboot=for devtype in mmc; do " \
++ "for devnum in 0 1; do " \
++ "if ${devtype} dev ${devnum}; then " \
++ "echo ${devtype} found on device ${devnum};" \
++ "setenv bootpart ${devnum}:1;" \
++ "part uuid ${devtype} ${bootpart} uuid;" \
++ "setenv root PARTUUID=${uuid} rw rootwait;" \
++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \
++ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
++ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
++ "env import -t ${loadaddr} ${filesize};" \
++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \
++ "echo Checking if uenvcmd is set ...;" \
++ "if test -n ${uenvcmd}; then " \
++ "echo Running uenvcmd ...;" \
++ "run uenvcmd;" \
++ "fi;" \
++ "fi;" \
++ "if run loadimage; then " \
++ "run mmcargs;" \
++ "if run loadfdt; then " \
++ "if run loadrd; then " \
++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++ "else " \
++ "bootz ${loadaddr} - ${fdtaddr};" \
++ "fi;" \
++ "fi;" \
++ "else " \
++ "echo No kernel found;" \
++ "fi;" \
++ "setexpr devnum ${devnum} + 1;" \
++ "fi;" \
++ "done;" \
++ "done;\0" \
+ "spiboot=echo Booting from spi ...; " \
+ "run spiargs; " \
+ "sf probe ${spibusno}:0; " \
+@@ -541,9 +532,6 @@
+ #define CONFIG_BOOTCOMMAND \
+ "run findfdt; " \
+ "run mmcboot;" \
+- "setenv mmcdev 1; " \
+- "setenv bootpart 1:2; " \
+- "run mmcboot;" \
+ "run nandboot;"
+
+ /* NS16550 Configuration */
diff --git a/libre/uboot-chiliboard/PKGBUILD b/libre/uboot-chiliboard/PKGBUILD
new file mode 100644
index 000000000..4231c9844
--- /dev/null
+++ b/libre/uboot-chiliboard/PKGBUILD
@@ -0,0 +1,59 @@
+# U-Boot: ChiliBoard
+# Maintainer: André Silva <emulatorman@parabola.nu>
+
+buildarch=4
+
+pkgname=uboot-chiliboard
+pkgver=2014.07
+pkgrel=1.parabola1
+pkgdesc="U-Boot for ChiliBoard"
+arch=('armv7h')
+url="http://git.denx.de/u-boot.git/"
+replaces=('uboot-chiliboard-linux-libre')
+conflicts=('uboot4extlinux-chiliboard' 'uboot4grub-chiliboard')
+makedepends=('bc')
+depends=('linux-libre')
+license=('GPL')
+install=${pkgname}.install
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
+ '0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch'
+ '0002-ARM-asm-io.h-use-static-inline.patch'
+ '0003-common-main.c-make-show_boot_progress-__weak.patch'
+ '0004-common-board_f-cosmetic-use-__weak-for-leds.patch'
+ '0005-chiliboard-support.patch'
+ '0006-parabola-arm-modifications.patch'
+ 'uEnv.txt')
+md5sums=('36d4bad687edcafa396fee607e505d4e'
+ 'e070e8b5cf8628b6440dfc9dbd87cb65'
+ '318310de19110167fe15ceac3ae32f7d'
+ '1792346431786e1442c4059cd3f288ed'
+ '2a32a77f123391c02935754ced2743c2'
+ '5951c799b35c526f02edbcb3eb1295fc'
+ '1bc6fd3299a42e15c5f14741aac15052'
+ '0afad1f6f3f8609db6e1f5bb322b2a1a')
+
+prepare() {
+ cd u-boot-${pkgver}
+ patch -Np1 -i ../0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch
+ patch -Np1 -i ../0002-ARM-asm-io.h-use-static-inline.patch
+ patch -Np1 -i ../0003-common-main.c-make-show_boot_progress-__weak.patch
+ patch -Np1 -i ../0004-common-board_f-cosmetic-use-__weak-for-leds.patch
+ patch -Np1 -i ../0005-chiliboard-support.patch
+ patch -Np1 -i ../0006-parabola-arm-modifications.patch
+}
+
+build() {
+ cd u-boot-${pkgver}
+
+ unset CFLAGS CXXFLAGS LDFLAGS
+
+ make distclean
+ make chiliboard_config
+ make
+}
+
+package() {
+ cd u-boot-${pkgver}
+ mkdir -p "${pkgdir}"/boot
+ cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot
+}
diff --git a/libre/uboot-chiliboard/uEnv.txt b/libre/uboot-chiliboard/uEnv.txt
new file mode 100644
index 000000000..a9f26096d
--- /dev/null
+++ b/libre/uboot-chiliboard/uEnv.txt
@@ -0,0 +1 @@
+optargs=
diff --git a/libre/uboot-chiliboard/uboot-chiliboard.install b/libre/uboot-chiliboard/uboot-chiliboard.install
new file mode 100644
index 000000000..24ccc1acb
--- /dev/null
+++ b/libre/uboot-chiliboard/uboot-chiliboard.install
@@ -0,0 +1,32 @@
+flash_instructions() {
+ echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
+ echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
+}
+
+flash_uboot() {
+ root=$(mount | awk '/ on \/ / { print $1; }')
+ if [[ $root =~ ^/dev/mmcblk.*$ ]]; then
+ root=${root:0:12}
+ echo "A new U-Boot version needs to be flashed onto $root."
+ echo "Do this now? [y|N]"
+ read -r shouldwe
+ if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
+ dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k
+ dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k
+ else
+ echo "You can do this later by running:"
+ flash_instructions
+ fi
+ else
+ echo "Flash the new U-Boot version onto your boot device. For example:"
+ flash_instructions
+ fi
+}
+
+post_install() {
+ flash_uboot
+}
+
+post_upgrade() {
+ flash_uboot
+}