diff options
| author | Francis Rowe <info@gluglug.org.uk> | 2014-07-11 08:53:00 +0000 |
|---|---|---|
| committer | Michał Masłowski <mtjm@mtjm.eu> | 2014-08-22 19:01:19 +0200 |
| commit | cee90ae0fce6d6aee8d78969b60c952c8890abd6 (patch) | |
| tree | 6cbca259e213f5ffbc3927121e662c0377938cce /resources/memtest86/patch | |
Libreboot release 6 beta 1.
Diffstat (limited to 'resources/memtest86/patch')
| -rw-r--r-- | resources/memtest86/patch/COPYING | 6 | ||||
| -rw-r--r-- | resources/memtest86/patch/diff | 40 |
2 files changed, 46 insertions, 0 deletions
diff --git a/resources/memtest86/patch/COPYING b/resources/memtest86/patch/COPYING new file mode 100644 index 0000000..b3d325f --- /dev/null +++ b/resources/memtest86/patch/COPYING @@ -0,0 +1,6 @@ +the "gitdiff" file is a patch for MemTest86+ so check that project's copyright information +to see what conditions apply. + +Look in ../../../docs/RELEASE.html for information about where to get libreboot_src.tar.gz +or libreboot_meta.tar.gz, both of which contain information about the version of MemTest86+ +used and where it came from. diff --git a/resources/memtest86/patch/diff b/resources/memtest86/patch/diff new file mode 100644 index 0000000..0abd8d0 --- /dev/null +++ b/resources/memtest86/patch/diff @@ -0,0 +1,40 @@ +diff -rupN memtest86+-5.01_/config.h memtest86+-5.01/config.h +--- memtest86+-5.01_/config.h 2014-06-25 22:57:47.893476783 +0100 ++++ memtest86+-5.01/config.h 2014-06-25 22:59:01.269840630 +0100 +@@ -17,7 +17,7 @@ + #define CONSERVATIVE_SMP 1 + + /* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */ +-#define BEEP_MODE 0 ++#define BEEP_MODE 1 + + /* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */ + #define BEEP_END_NO_ERROR 0 +@@ -29,13 +29,13 @@ + /* SERIAL_CONSOLE_DEFAULT - The default state of the serial console. */ + /* This is normally off since it slows down testing. Change to a 1 */ + /* to enable. */ +-#define SERIAL_CONSOLE_DEFAULT 0 ++#define SERIAL_CONSOLE_DEFAULT 1 + + /* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */ + #define SERIAL_TTY 0 + + /* SERIAL_BAUD_RATE - Baud rate for the serial console */ +-#define SERIAL_BAUD_RATE 9600 ++#define SERIAL_BAUD_RATE 115200 + + /* SCRN_DEBUG - extra check for SCREEN_BUFFER + */ +diff -rupN memtest86+-5.01_/Makefile memtest86+-5.01/Makefile +--- memtest86+-5.01_/Makefile 2014-06-25 22:57:47.893476783 +0100 ++++ memtest86+-5.01/Makefile 2014-06-25 22:59:19.237929751 +0100 +@@ -21,7 +21,7 @@ OBJS= head.o reloc.o main.o test.o init. + + + all: clean memtest.bin memtest +- scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus ++# scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus + + # Link it statically once so I know I don't have undefined + # symbols and then link it dynamically so I have full |