diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi | 103 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi | 52 | ||||
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 349 | ||||
| -rw-r--r-- | arch/arm/boot/dts/rk3228.dtsi | 591 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sun5i-q8-common.dtsi | 180 | ||||
| -rw-r--r-- | arch/arm/boot/dts/sunxi-q8-common.dtsi | 83 |
6 files changed, 0 insertions, 1358 deletions
diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi deleted file mode 100644 index 3e4c4ad96..000000000 --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Device tree sources for Exynos5422 thermal zone - * - * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> - * Anand Moon <linux.amoon@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <dt-bindings/thermal/thermal.h> - -/ { - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu_alert0: cpu-alert-0 { - temperature = <50000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_alert1: cpu-alert-1 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_alert2: cpu-alert-2 { - temperature = <70000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - /* - * Exyunos542x support only 4 trip-points - * so for these polling mode is required. - * Start polling at temperature level of last - * interrupt-driven trip: cpu_alert2 - */ - cpu_alert3: cpu-alert-3 { - temperature = <70000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert4: cpu-alert-4 { - temperature = <85000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - - }; - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu_alert2>; - cooling-device = <&fan0 2 3>; - }; - /* - * When reaching cpu_alert3, reduce CPU - * by 2 steps. On Exynos5422/5800 that would - * be: 1500 MHz and 1100 MHz. - */ - map3 { - trip = <&cpu_alert3>; - cooling-device = <&cpu0 0 2>; - }; - map4 { - trip = <&cpu_alert3>; - cooling-device = <&cpu4 0 2>; - }; - - /* - * When reaching cpu_alert4, reduce CPU - * further, down to 600 MHz (11 steps for big, - * 7 steps for LITTLE). - */ - map5 { - trip = <&cpu_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { - trip = <&cpu_alert4>; - cooling-device = <&cpu4 3 11>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi deleted file mode 100644 index a3efb9704..000000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi +++ /dev/null @@ -1,52 +0,0 @@ -&tlmm_pinmux { - card_detect: card-detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie-pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - - user_leds: user-leds { - mux { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - }; - - conf { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - output-low; - }; - }; - - magneto_pins: magneto-pins { - mux { - pins = "gpio31", "gpio48"; - function = "gpio"; - bias-disable; - }; - }; -}; - -&pm8921_mpps { - mpp_leds: mpp-leds { - pinconf { - pins = "mpp7", "mpp8"; - function = "digital"; - output-low; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts deleted file mode 100644 index e01b27ea7..000000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ /dev/null @@ -1,349 +0,0 @@ -#include "qcom-apq8064-v2.0.dtsi" -#include "qcom-apq8064-arrow-db600c-pins.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Arrow Electronics, APQ8064 DB600c"; - compatible = "arrow,db600c", "qcom,apq8064"; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi1_serial; - i2c0 = &gsbi2_i2c; - i2c1 = &gsbi3_i2c; - i2c2 = &gsbi4_i2c; - i2c3 = &gsbi7_i2c; - spi0 = &gsbi5_spi; - }; - - regulators { - compatible = "simple-bus"; - vph: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <4500000>; - regulator-name = "VPH"; - regulator-type = "voltage"; - regulator-boot-on; - }; - - /* on board fixed 3.3v supply */ - vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - }; - - soc { - rpm@108000 { - regulators { - vdd_s1-supply = <&vph>; - vdd_s2-supply = <&vph>; - vdd_s3-supply = <&vph>; - vdd_s4-supply = <&vph>; - vdd_s5-supply = <&vph>; - vdd_s6-supply = <&vph>; - vdd_s7-supply = <&vph>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l3_l15_l17-supply = <&vph>; - vdd_l4_l14-supply = <&vph>; - vdd_l5_l8_l16-supply = <&vph>; - vdd_l6_l7-supply = <&vph>; - vdd_l9_l11-supply = <&vph>; - vdd_l10_l22-supply = <&vph>; - vdd_l21_l23_l29-supply = <&vph>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - regulator-always-on; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - regulator-boot-on; - regulator-always-on; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - - lvs7 { - bias-pull-down; - }; - }; - }; - - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; - serial@12450000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi1_uart_4pins>; - }; - }; - - gsbi@12480000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@124a0000 { - /* On Low speed expansion and Sensors */ - label = "LS-I2C0"; - status = "okay"; - lis3mdl_mag@1e { - compatible = "st,lis3mdl-magn"; - reg = <0x1e>; - vdd-supply = <&vcc3v3>; - vddio-supply = <&pm8921_s4>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_pins>; - interrupt-parent = <&tlmm_pinmux>; - - st,drdy-int-pin = <2>; - interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ - <31 IRQ_TYPE_EDGE_RISING>; /* INT */ - }; - }; - }; - - gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; - clock-frequency = <200000>; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <64>; - }; - }; - }; - - gsbi@16300000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16380000 { - /* On High speed expansion */ - label = "HS-CAM-I2C3"; - status = "okay"; - }; - }; - - gsbi@1a200000 { - status = "okay"; - spi@1a280000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; - }; - - /* DEBUG UART */ - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - label = "LS-UART0"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; - - i2c@16680000 { - /* On High speed expansion */ - status = "okay"; - label = "HS-CAM-I2C2"; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds>, <&mpp_leds>; - - compatible = "gpio-leds"; - - user-led0 { - label = "user0-led"; - gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - user-led1 { - label = "user1-led"; - gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - user-led2 { - label = "user2-led"; - gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - user-led3 { - label = "user3-led"; - gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - default-state = "off"; - }; - - wifi-led { - label = "WiFi-led"; - gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - bt-led { - label = "BT-led"; - gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&vcc3v3>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - phy@1b400000 { - status = "okay"; - }; - - sata@29000000 { - status = "okay"; - target-supply = <&pm8921_lvs7>; - }; - - /* OTG */ - phy@12500000 { - status = "okay"; - dr_mode = "peripheral"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget@12500000 { - status = "okay"; - }; - - /* OTG */ - usb@12500000 { - status = "okay"; - }; - - usb@12520000 { - status = "okay"; - }; - - usb@12530000 { - status = "okay"; - }; - - amba { - /* eMMC */ - sdcc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc@12180000 { - status = "okay"; - vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi deleted file mode 100644 index e23a22e29..000000000 --- a/arch/arm/boot/dts/rk3228.dtsi +++ /dev/null @@ -1,591 +0,0 @@ -/* - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/clock/rk3228-cru.h> -#include <dt-bindings/thermal/thermal.h> -#include "skeleton.dtsi" - -/ { - compatible = "rockchip,rk3228"; - - interrupt-parent = <&gic>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@f00 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf00>; - resets = <&cru SRST_CORE0>; - operating-points = < - /* KHz uV */ - 816000 1000000 - >; - #cooling-cells = <2>; /* min followed by max */ - clock-latency = <40000>; - clocks = <&cru ARMCLK>; - }; - - cpu1: cpu@f01 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf01>; - resets = <&cru SRST_CORE1>; - }; - - cpu2: cpu@f02 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf02>; - resets = <&cru SRST_CORE2>; - }; - - cpu3: cpu@f03 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0xf03>; - resets = <&cru SRST_CORE3>; - }; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@110f0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x110f0000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - timer { - compatible = "arm,armv7-timer"; - arm,cpu-registers-not-fw-configured; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - clock-frequency = <24000000>; - }; - - xin24m: oscillator { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xin24m"; - #clock-cells = <0>; - }; - - grf: syscon@11000000 { - compatible = "syscon"; - reg = <0x11000000 0x1000>; - }; - - uart0: serial@11010000 { - compatible = "snps,dw-apb-uart"; - reg = <0x11010000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart1: serial@11020000 { - compatible = "snps,dw-apb-uart"; - reg = <0x11020000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart2: serial@11030000 { - compatible = "snps,dw-apb-uart"; - reg = <0x11030000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <24000000>; - clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; - clock-names = "baudclk", "apb_pclk"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - i2c0: i2c@11050000 { - compatible = "rockchip,rk3228-i2c"; - reg = <0x11050000 0x1000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_xfer>; - status = "disabled"; - }; - - i2c1: i2c@11060000 { - compatible = "rockchip,rk3228-i2c"; - reg = <0x11060000 0x1000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_xfer>; - status = "disabled"; - }; - - i2c2: i2c@11070000 { - compatible = "rockchip,rk3228-i2c"; - reg = <0x11070000 0x1000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C2>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; - status = "disabled"; - }; - - i2c3: i2c@11080000 { - compatible = "rockchip,rk3228-i2c"; - reg = <0x11080000 0x1000>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "i2c"; - clocks = <&cru PCLK_I2C3>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_xfer>; - status = "disabled"; - }; - - pwm0: pwm@110b0000 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x110b0000 0x10>; - #pwm-cells = <3>; - clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "disabled"; - }; - - pwm1: pwm@110b0010 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x110b0010 0x10>; - #pwm-cells = <3>; - clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm1_pin>; - status = "disabled"; - }; - - pwm2: pwm@110b0020 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x110b0020 0x10>; - #pwm-cells = <3>; - clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pin>; - status = "disabled"; - }; - - pwm3: pwm@110b0030 { - compatible = "rockchip,rk3288-pwm"; - reg = <0x110b0030 0x10>; - #pwm-cells = <2>; - clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pin>; - status = "disabled"; - }; - - timer: timer@110c0000 { - compatible = "rockchip,rk3288-timer"; - reg = <0x110c0000 0x20>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&xin24m>, <&cru PCLK_TIMER>; - clock-names = "timer", "pclk"; - }; - - cru: clock-controller@110e0000 { - compatible = "rockchip,rk3228-cru"; - reg = <0x110e0000 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - assigned-clocks = <&cru PLL_GPLL>; - assigned-clock-rates = <594000000>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <100>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&tsadc 0>; - - trips { - cpu_alert0: cpu_alert0 { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert1: cpu_alert1 { - temperature = <75000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT 6>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - tsadc: tsadc@11150000 { - compatible = "rockchip,rk3228-tsadc"; - reg = <0x11150000 0x100>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - resets = <&cru SRST_TSADC>; - reset-names = "tsadc-apb"; - pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; - pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; - #thermal-sensor-cells = <0>; - rockchip,hw-tshut-temp = <95000>; - status = "disabled"; - }; - - emmc: dwmmc@30020000 { - compatible = "rockchip,rk3288-dw-mshc"; - reg = <0x30020000 0x4000>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, - <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; - bus-width = <8>; - default-sample-phase = <158>; - num-slots = <1>; - fifo-depth = <0x100>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; - status = "disabled"; - }; - - gic: interrupt-controller@32010000 { - compatible = "arm,gic-400"; - interrupt-controller; - #interrupt-cells = <3>; - #address-cells = <0>; - - reg = <0x32011000 0x1000>, - <0x32012000 0x1000>, - <0x32014000 0x2000>, - <0x32016000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - pinctrl: pinctrl { - compatible = "rockchip,rk3228-pinctrl"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@11110000 { - compatible = "rockchip,gpio-bank"; - reg = <0x11110000 0x100>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO0>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio1@11120000 { - compatible = "rockchip,gpio-bank"; - reg = <0x11120000 0x100>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO1>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio2@11130000 { - compatible = "rockchip,gpio-bank"; - reg = <0x11130000 0x100>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO2>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio3@11140000 { - compatible = "rockchip,gpio-bank"; - reg = <0x11140000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru PCLK_GPIO3>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - pcfg_pull_up: pcfg-pull-up { - bias-pull-up; - }; - - pcfg_pull_down: pcfg-pull-down { - bias-pull-down; - }; - - pcfg_pull_none: pcfg-pull-none { - bias-disable; - }; - - emmc { - emmc_clk: emmc-clk { - rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; - }; - - emmc_cmd: emmc-cmd { - rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>; - }; - - emmc_bus8: emmc-bus8 { - rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, - <1 25 RK_FUNC_2 &pcfg_pull_none>, - <1 26 RK_FUNC_2 &pcfg_pull_none>, - <1 27 RK_FUNC_2 &pcfg_pull_none>, - <1 28 RK_FUNC_2 &pcfg_pull_none>, - <1 29 RK_FUNC_2 &pcfg_pull_none>, - <1 30 RK_FUNC_2 &pcfg_pull_none>, - <1 31 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - i2c0 { - i2c0_xfer: i2c0-xfer { - rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, - <0 1 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - i2c1 { - i2c1_xfer: i2c1-xfer { - rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, - <0 3 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - i2c2 { - i2c2_xfer: i2c2-xfer { - rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, - <2 21 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - i2c3 { - i2c3_xfer: i2c3-xfer { - rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, - <0 7 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - pwm0 { - pwm0_pin: pwm0-pin { - rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - pwm1 { - pwm1_pin: pwm1-pin { - rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - pwm2 { - pwm2_pin: pwm2-pin { - rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - pwm3 { - pwm3_pin: pwm3-pin { - rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - tsadc { - otp_gpio: otp-gpio { - rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - otp_out: otp-out { - rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; - }; - }; - - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, - <2 27 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart0_cts: uart0-cts { - rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart0_rts: uart0-rts { - rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>, - <1 10 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart1_cts: uart1-cts { - rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart1_rts: uart1-rts { - rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, - <1 19 RK_FUNC_2 &pcfg_pull_none>; - }; - - uart2_cts: uart2-cts { - rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; - }; - - uart2_rts: uart2-rts { - rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi deleted file mode 100644 index a78e189f6..000000000 --- a/arch/arm/boot/dts/sun5i-q8-common.dtsi +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -#include "sunxi-q8-common.dtsi" - -#include <dt-bindings/pwm/pwm.h> - -/ { - aliases { - serial0 = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&i2c1 { - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -#include "axp209.dtsi" - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-q8-common.dtsi deleted file mode 100644 index b8241462f..000000000 --- a/arch/arm/boot/dts/sunxi-q8-common.dtsi +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include "sunxi-common-regulators.dtsi" - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; |