summaryrefslogtreecommitdiff
path: root/man/systemd.unit.xml
diff options
context:
space:
mode:
Diffstat (limited to 'man/systemd.unit.xml')
-rw-r--r--man/systemd.unit.xml1084
1 files changed, 1084 insertions, 0 deletions
diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml
new file mode 100644
index 0000000000..c20efe5527
--- /dev/null
+++ b/man/systemd.unit.xml
@@ -0,0 +1,1084 @@
+<?xml version='1.0'?> <!--*-nxml-*-->
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+
+<!--
+ This file is part of systemd.
+
+ Copyright 2010 Lennart Poettering
+
+ systemd is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ systemd is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with systemd; If not, see <http://www.gnu.org/licenses/>.
+-->
+
+<refentry id="systemd.unit">
+
+ <refentryinfo>
+ <title>systemd.unit</title>
+ <productname>systemd</productname>
+
+ <authorgroup>
+ <author>
+ <contrib>Developer</contrib>
+ <firstname>Lennart</firstname>
+ <surname>Poettering</surname>
+ <email>lennart@poettering.net</email>
+ </author>
+ </authorgroup>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>systemd.unit</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </refmeta>
+
+ <refnamediv>
+ <refname>systemd.unit</refname>
+ <refpurpose>Unit configuration</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <para><filename>systemd.service</filename>,
+ <filename>systemd.socket</filename>,
+ <filename>systemd.device</filename>,
+ <filename>systemd.mount</filename>,
+ <filename>systemd.automount</filename>,
+ <filename>systemd.swap</filename>,
+ <filename>systemd.target</filename>,
+ <filename>systemd.path</filename>,
+ <filename>systemd.timer</filename>,
+ <filename>systemd.snapshot</filename></para>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>A unit configuration file encodes information
+ about a service, a socket, a device, a mount point, an
+ automount point, a swap file or partition, a start-up
+ target, a file system path or a timer controlled and
+ supervised by
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>. The
+ syntax is inspired by <ulink
+ url="http://standards.freedesktop.org/desktop-entry-spec/latest/">XDG
+ Desktop Entry Specification</ulink> <filename>.desktop</filename> files, which are in turn
+ inspired by Microsoft Windows
+ <filename>.ini</filename> files.</para>
+
+ <para>This man page lists the common configuration
+ options of all the unit types. These options need to
+ be configured in the [Unit] or [Install]
+ sections of the unit files.</para>
+
+ <para>In addition to the generic [Unit] and [Install]
+ sections described here, each unit should have a
+ type-specific section, e.g. [Service] for a service
+ unit. See the respective man pages for more
+ information.</para>
+
+ <para>Unit files may contain additional options on top
+ of those listed here. If systemd encounters an unknown
+ option it will write a warning log message but
+ continue loading the unit. If an option is prefixed
+ with <option>X-</option> it is ignored completely by
+ systemd. Applications may use this to include
+ additional information in the unit files.</para>
+
+ <para>Boolean arguments used in unit files can be
+ written in various formats. For positive settings the
+ strings <option>1</option>, <option>yes</option>,
+ <option>true</option> and <option>on</option> are
+ equivalent. For negative settings the strings
+ <option>0</option>, <option>no</option>,
+ <option>false</option> and <option>off</option> are
+ equivalent.</para>
+
+ <para>Time span values encoded in unit files can be
+ written in various formats. A stand-alone number
+ specifies a time in seconds. If suffixed with a time
+ unit, the unit is honored. A concatenation of
+ multiple values with units is supported, in which case
+ the values are added up. Example: "50" refers to 50
+ seconds; "2min 200ms" refers to 2 minutes plus 200
+ milliseconds, i.e. 120200ms. The following time units
+ are understood: s, min, h, d, w, ms, us.</para>
+
+ <para>Empty lines and lines starting with # or ; are
+ ignored. This may be used for commenting. Lines ending
+ in a backslash are concatenated with the following
+ line while reading and the backslash is replaced by a
+ space character. This may be used to wrap long lines.</para>
+
+ <para>If a line starts with <option>.include</option>
+ followed by a file name, the specified file will be
+ parsed at this point. Make sure that the file that is
+ included has the appropriate section headers before
+ any directives.</para>
+
+ <para>Along with a unit file
+ <filename>foo.service</filename> a directory
+ <filename>foo.service.wants/</filename> may exist. All
+ units symlinked from such a directory are implicitly
+ added as dependencies of type
+ <varname>Wanted=</varname> to the unit. This is useful
+ to hook units into the start-up of other units,
+ without having to modify their unit configuration
+ files. For details about the semantics of
+ <varname>Wanted=</varname> see below. The preferred
+ way to create symlinks in the
+ <filename>.wants/</filename> directory of a service is
+ with the <command>enable</command> command of the
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ tool which reads information from the [Install]
+ section of unit files. (See below.) A similar
+ functionality exists for <varname>Requires=</varname>
+ type dependencies as well, the directory suffix is
+ <filename>.requires/</filename> in this case.</para>
+
+ <para>Note that while systemd offers a flexible
+ dependency system between units it is recommended to
+ use this functionality only sparsely and instead rely
+ on techniques such as bus-based or socket-based
+ activation which makes dependencies implicit, which
+ both results in a simpler and more flexible
+ system.</para>
+
+ <para>Some unit names reflect paths existing in the
+ file system name space. Example: a device unit
+ <filename>dev-sda.device</filename> refers to a device
+ with the device node <filename>/dev/sda</filename> in
+ the file system namespace. If this applies a special
+ way to escape the path name is used, so that the
+ result is usable as part of a file name. Basically,
+ given a path, "/" is replaced by "-", and all
+ unprintable characters and the "-" are replaced by
+ C-style "\x20" escapes. The root directory "/" is
+ encoded as single dash, while otherwise the initial
+ and ending "/" is removed from all paths during
+ transformation. This escaping is reversible.</para>
+
+ <para>Optionally, units may be instantiated from a
+ template file at runtime. This allows creation of
+ multiple units from a single configuration file. If
+ systemd looks for a unit configuration file it will
+ first search for the literal unit name in the
+ filesystem. If that yields no success and the unit
+ name contains an @ character, systemd will look for a
+ unit template that shares the same name but with the
+ instance string (i.e. the part between the @ character
+ and the suffix) removed. Example: if a service
+ <filename>getty@tty3.service</filename> is requested
+ and no file by that name is found, systemd will look
+ for <filename>getty@.service</filename> and
+ instantiate a service from that configuration file if
+ it is found.</para>
+
+ <para>To refer to the instance string from
+ within the configuration file you may use the special
+ <literal>%i</literal> specifier in many of the
+ configuration options. Other specifiers exist, the
+ full list is:</para>
+
+ <table>
+ <title>Specifiers available in unit files</title>
+ <tgroup cols='3' align='left' colsep='1' rowsep='1'>
+ <colspec colname="spec" />
+ <colspec colname="mean" />
+ <colspec colname="detail" />
+ <thead>
+ <row>
+ <entry>Specifier</entry>
+ <entry>Meaning</entry>
+ <entry>Details</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><literal>%n</literal></entry>
+ <entry>Full unit name</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%N</literal></entry>
+ <entry>Unescaped full unit name</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%p</literal></entry>
+ <entry>Prefix name</entry>
+ <entry>This refers to the string before the @, i.e. "getty" in the example above, where "tty3" is the instance name.</entry>
+ </row>
+ <row>
+ <entry><literal>%P</literal></entry>
+ <entry>Unescaped prefix name</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%i</literal></entry>
+ <entry>Instance name</entry>
+ <entry>This is the string between the @ character and the suffix.</entry>
+ </row>
+ <row>
+ <entry><literal>%I</literal></entry>
+ <entry>Unescaped instance name</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%f</literal></entry>
+ <entry>Unescaped file name</entry>
+ <entry>This is either the unescaped instance name (if set) with / prepended (if necessary), or the prefix name similarly prepended with /.</entry>
+ </row>
+ <row>
+ <entry><literal>%c</literal></entry>
+ <entry>Control group path of the unit</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%r</literal></entry>
+ <entry>Root control group path of systemd</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%R</literal></entry>
+ <entry>Parent directory of the root control group path of systemd</entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry><literal>%t</literal></entry>
+ <entry>Runtime socket dir</entry>
+ <entry>This is either /run (for the system manager) or $XDG_RUNTIME_DIR (for user managers).</entry>
+ </row>
+ <row>
+ <entry><literal>%u</literal></entry>
+ <entry>User name</entry>
+ <entry>This is the name of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry>
+ </row>
+ <row>
+ <entry><literal>%h</literal></entry>
+ <entry>User home directory</entry>
+ <entry>This is the home directory of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry>
+ </row>
+ <row>
+ <entry><literal>%s</literal></entry>
+ <entry>User shell</entry>
+ <entry>This is the shell of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry>
+ </row>
+ <row>
+ <entry><literal>%m</literal></entry>
+ <entry>Machine ID</entry>
+ <entry>The machine ID of the running system, formatted as string. See <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information.</entry>
+ </row>
+ <row>
+ <entry><literal>%b</literal></entry>
+ <entry>Boot ID</entry>
+ <entry>The boot ID of the running system, formatted as string. See <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> for more information.</entry>
+ </row>
+ <row>
+ <entry><literal>%H</literal></entry>
+ <entry>Host name</entry>
+ <entry>The host name of the running system.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <para>If a unit file is empty (i.e. has the file size
+ 0) or is symlinked to <filename>/dev/null</filename>
+ its configuration will not be loaded and it appears
+ with a load state of <literal>masked</literal>, and
+ cannot be activated. Use this as an effective way to
+ fully disable a unit, making it impossible to start it
+ even manually.</para>
+
+ <para>The unit file format is covered by the
+ <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface
+ Stability Promise</ulink>.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>Options</title>
+
+ <para>Unit file may include a [Unit] section, which
+ carries generic information about the unit that is not
+ dependent on the type of unit:</para>
+
+ <variablelist>
+
+ <varlistentry>
+ <term><varname>Description=</varname></term>
+ <listitem><para>A free-form string
+ describing the unit. This is intended
+ for use in UIs to show descriptive
+ information along with the unit
+ name.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Documentation=</varname></term>
+ <listitem><para>A space separated list
+ of URIs referencing documentation for
+ this unit or its
+ configuration. Accepted are only URIs
+ of the types
+ <literal>http://</literal>,
+ <literal>https://</literal>,
+ <literal>file:</literal>,
+ <literal>info:</literal>,
+ <literal>man:</literal>. For more
+ information about the syntax of these
+ URIs see
+ <citerefentry><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>. The
+ URIs should be listed in order of
+ relevance, starting with the most
+ relevant. It is a good idea to first
+ reference documentation that explains
+ what the unit's purpose is, followed
+ by how it is configured, followed by
+ any other related
+ documentation.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Requires=</varname></term>
+
+ <listitem><para>Configures requirement
+ dependencies on other units. If this
+ unit gets activated, the units listed
+ here will be activated as well. If one
+ of the other units gets deactivated or
+ its activation fails, this unit will
+ be deactivated. This option may be
+ specified more than once, in which
+ case requirement dependencies for all
+ listed names are created. Note that
+ requirement dependencies do not
+ influence the order in which services
+ are started or stopped. This has to be
+ configured independently with the
+ <varname>After=</varname> or
+ <varname>Before=</varname> options. If
+ a unit
+ <filename>foo.service</filename>
+ requires a unit
+ <filename>bar.service</filename> as
+ configured with
+ <varname>Requires=</varname> and no
+ ordering is configured with
+ <varname>After=</varname> or
+ <varname>Before=</varname>, then both
+ units will be started simultaneously
+ and without any delay between them if
+ <filename>foo.service</filename> is
+ activated. Often it is a better choice
+ to use <varname>Wants=</varname>
+ instead of
+ <varname>Requires=</varname> in order
+ to achieve a system that is more
+ robust when dealing with failing
+ services.</para>
+
+ <para>Note that dependencies of this
+ type may also be configured outside of
+ the unit configuration file by
+ adding a symlink to a
+ <filename>.requires/</filename> directory
+ accompanying the unit file. For
+ details see above.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>RequiresOverridable=</varname></term>
+
+ <listitem><para>Similar to
+ <varname>Requires=</varname>.
+ Dependencies listed in
+ <varname>RequiresOverridable=</varname>
+ which cannot be fulfilled or fail to
+ start are ignored if the startup was
+ explicitly requested by the user. If
+ the start-up was pulled in indirectly
+ by some dependency or automatic
+ start-up of units that is not
+ requested by the user this dependency
+ must be fulfilled and otherwise the
+ transaction fails. Hence, this option
+ may be used to configure dependencies
+ that are normally honored unless the
+ user explicitly starts up the unit, in
+ which case whether they failed or not
+ is irrelevant.</para></listitem>
+
+ </varlistentry>
+ <varlistentry>
+ <term><varname>Requisite=</varname></term>
+ <term><varname>RequisiteOverridable=</varname></term>
+
+ <listitem><para>Similar to
+ <varname>Requires=</varname>
+ and <varname>RequiresOverridable=</varname>, respectively. However,
+ if a unit listed here is not started
+ already it will not be started and the
+ transaction fails
+ immediately.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Wants=</varname></term>
+
+ <listitem><para>A weaker version of
+ <varname>Requires=</varname>. A unit
+ listed in this option will be started
+ if the configuring unit is. However,
+ if the listed unit fails to start up
+ or cannot be added to the transaction
+ this has no impact on the validity of
+ the transaction as a whole. This is
+ the recommended way to hook start-up
+ of one unit to the start-up of another
+ unit.</para>
+
+ <para>Note that dependencies of this
+ type may also be configured outside of
+ the unit configuration file by
+ adding a symlink to a
+ <filename>.wants/</filename> directory
+ accompanying the unit file. For
+ details see above.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>BindsTo=</varname></term>
+
+ <listitem><para>Configures requirement
+ dependencies, very similar in style to
+ <varname>Requires=</varname>, however
+ in addition to this behavior it also
+ declares that this unit is stopped
+ when any of the units listed suddenly
+ disappears. Units can suddenly,
+ unexpectedly disappear if a service
+ terminates on its own choice, a device
+ is unplugged or a mount point
+ unmounted without involvement of
+ systemd.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>PartOf=</varname></term>
+
+ <listitem><para>Configures dependencies
+ similar to <varname>Requires=</varname>,
+ but limited to stopping and restarting
+ of units. When systemd stops or restarts
+ the units listed here, the action is
+ propagated to this unit.
+ Note that this is a one way dependency -
+ changes to this unit do not affect the
+ listed units.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Conflicts=</varname></term>
+
+ <listitem><para>Configures negative
+ requirement dependencies. If a unit
+ has a
+ <varname>Conflicts=</varname> setting
+ on another unit, starting the former
+ will stop the latter and vice
+ versa. Note that this setting is
+ independent of and orthogonal to the
+ <varname>After=</varname> and
+ <varname>Before=</varname> ordering
+ dependencies.</para>
+
+ <para>If a unit A that conflicts with
+ a unit B is scheduled to be started at
+ the same time as B, the transaction
+ will either fail (in case both are
+ required part of the transaction) or
+ be modified to be fixed (in case one
+ or both jobs are not a required part
+ of the transaction). In the latter
+ case the job that is not the required
+ will be removed, or in case both are
+ not required the unit that conflicts
+ will be started and the unit that is
+ conflicted is
+ stopped.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Before=</varname></term>
+ <term><varname>After=</varname></term>
+
+ <listitem><para>Configures ordering
+ dependencies between units. If a unit
+ <filename>foo.service</filename>
+ contains a setting
+ <option>Before=bar.service</option>
+ and both units are being started,
+ <filename>bar.service</filename>'s
+ start-up is delayed until
+ <filename>foo.service</filename> is
+ started up. Note that this setting is
+ independent of and orthogonal to the
+ requirement dependencies as configured
+ by <varname>Requires=</varname>. It is
+ a common pattern to include a unit
+ name in both the
+ <varname>After=</varname> and
+ <varname>Requires=</varname> option in
+ which case the unit listed will be
+ started before the unit that is
+ configured with these options. This
+ option may be specified more than
+ once, in which case ordering
+ dependencies for all listed names are
+ created. <varname>After=</varname> is
+ the inverse of
+ <varname>Before=</varname>, i.e. while
+ <varname>After=</varname> ensures that
+ the configured unit is started after
+ the listed unit finished starting up,
+ <varname>Before=</varname> ensures the
+ opposite, i.e. that the configured
+ unit is fully started up before the
+ listed unit is started. Note that when
+ two units with an ordering dependency
+ between them are shut down, the
+ inverse of the start-up order is
+ applied. i.e. if a unit is configured
+ with <varname>After=</varname> on
+ another unit, the former is stopped
+ before the latter if both are shut
+ down. If one unit with an ordering
+ dependency on another unit is shut
+ down while the latter is started up,
+ the shut down is ordered before the
+ start-up regardless whether the
+ ordering dependency is actually of
+ type <varname>After=</varname> or
+ <varname>Before=</varname>. If two
+ units have no ordering dependencies
+ between them they are shut down
+ or started up simultaneously, and
+ no ordering takes
+ place. </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>OnFailure=</varname></term>
+
+ <listitem><para>Lists one or more
+ units that are activated when this
+ unit enters the
+ '<literal>failed</literal>'
+ state.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>PropagatesReloadTo=</varname></term>
+ <term><varname>ReloadPropagatedFrom=</varname></term>
+
+ <listitem><para>Lists one or more
+ units where reload requests on the
+ unit will be propagated to/on the
+ other unit will be propagated
+ from. Issuing a reload request on a
+ unit will automatically also enqueue a
+ reload request on all units that the
+ reload request shall be propagated to
+ via these two
+ settings.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>RequiresMountsFor=</varname></term>
+
+ <listitem><para>Takes a space
+ separated list of absolute paths. Automatically
+ adds dependencies of type
+ <varname>Requires=</varname> and
+ <varname>After=</varname> for all
+ mount units required to access the
+ specified path.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>OnFailureIsolate=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option> the
+ unit listed in
+ <varname>OnFailure=</varname> will be
+ enqueued in isolation mode, i.e. all
+ units that are not its dependency will
+ be stopped. If this is set only a
+ single unit may be listed in
+ <varname>OnFailure=</varname>. Defaults
+ to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>IgnoreOnIsolate=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ this unit will not be stopped when
+ isolating another unit. Defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>IgnoreOnSnapshot=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ this unit will not be included in
+ snapshots. Defaults to
+ <option>true</option> for device and
+ snapshot units, <option>false</option>
+ for the others.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>StopWhenUnneeded=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ this unit will be stopped when it is
+ no longer used. Note that in order to
+ minimize the work to be executed,
+ systemd will not stop units by default
+ unless they are conflicting with other
+ units, or the user explicitly
+ requested their shut down. If this
+ option is set, a unit will be
+ automatically cleaned up if no other
+ active unit requires it. Defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>RefuseManualStart=</varname></term>
+ <term><varname>RefuseManualStop=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ this unit can only be activated
+ or deactivated indirectly. In
+ this case explicit start-up
+ or termination requested by the
+ user is denied, however if it is
+ started or stopped as a
+ dependency of another unit, start-up
+ or termination will succeed. This
+ is mostly a safety feature to ensure
+ that the user does not accidentally
+ activate units that are not intended
+ to be activated explicitly, and not
+ accidentally deactivate units that are
+ not intended to be deactivated.
+ These options default to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>AllowIsolate=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ this unit may be used with the
+ <command>systemctl isolate</command>
+ command. Otherwise this will be
+ refused. It probably is a good idea to
+ leave this disabled except for target
+ units that shall be used similar to
+ runlevels in SysV init systems, just
+ as a precaution to avoid unusable
+ system states. This option defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>DefaultDependencies=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ (the default), a few default
+ dependencies will implicitly be
+ created for the unit. The actual
+ dependencies created depend on the
+ unit type. For example, for service
+ units, these dependencies ensure that
+ the service is started only after
+ basic system initialization is
+ completed and is properly terminated on
+ system shutdown. See the respective
+ man pages for details. Generally, only
+ services involved with early boot or
+ late shutdown should set this option
+ to <option>false</option>. It is
+ highly recommended to leave this
+ option enabled for the majority of
+ common units. If set to
+ <option>false</option> this option
+ does not disable all implicit
+ dependencies, just non-essential
+ ones.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>JobTimeoutSec=</varname></term>
+
+ <listitem><para>When clients are
+ waiting for a job of this unit to
+ complete, time out after the specified
+ time. If this time limit is reached
+ the job will be cancelled, the unit
+ however will not change state or even
+ enter the '<literal>failed</literal>'
+ mode. This value defaults to 0 (job
+ timeouts disabled), except for device
+ units. NB: this timeout is independent
+ from any unit-specific timeout (for
+ example, the timeout set with
+ <varname>Timeout=</varname> in service
+ units) as the job timeout has no
+ effect on the unit itself, only on the
+ job that might be pending for it. Or
+ in other words: unit-specific timeouts
+ are useful to abort unit state
+ changes, and revert them. The job
+ timeout set with this option however
+ is useful to abort only the job
+ waiting for the unit state to
+ change.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>ConditionPathExists=</varname></term>
+ <term><varname>ConditionPathExistsGlob=</varname></term>
+ <term><varname>ConditionPathIsDirectory=</varname></term>
+ <term><varname>ConditionPathIsSymbolicLink=</varname></term>
+ <term><varname>ConditionPathIsMountPoint=</varname></term>
+ <term><varname>ConditionPathIsReadWrite=</varname></term>
+ <term><varname>ConditionDirectoryNotEmpty=</varname></term>
+ <term><varname>ConditionFileNotEmpty=</varname></term>
+ <term><varname>ConditionFileIsExecutable=</varname></term>
+ <term><varname>ConditionKernelCommandLine=</varname></term>
+ <term><varname>ConditionVirtualization=</varname></term>
+ <term><varname>ConditionSecurity=</varname></term>
+ <term><varname>ConditionCapability=</varname></term>
+ <term><varname>ConditionHost=</varname></term>
+ <term><varname>ConditionNull=</varname></term>
+
+ <listitem><para>Before starting a unit
+ verify that the specified condition is
+ true. If it is not true the starting
+ of the unit will be skipped, however
+ all ordering dependencies of it are
+ still respected. A failing condition
+ will not result in the unit being
+ moved into a failure state. The
+ condition is checked at the time the
+ queued start job is to be
+ executed.</para>
+
+ <para>With
+ <varname>ConditionPathExists=</varname>
+ a file existence condition is
+ checked before a unit is started. If
+ the specified absolute path name does
+ not exist the condition will
+ fail. If the absolute path name passed
+ to
+ <varname>ConditionPathExists=</varname>
+ is prefixed with an exclamation mark
+ ('!'), the test is negated, and the unit
+ is only started if the path does not
+ exist.</para>
+
+ <para><varname>ConditionPathExistsGlob=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>,
+ but checks for the existence of at
+ least one file or directory matching
+ the specified globbing pattern.</para>
+
+ <para><varname>ConditionPathIsDirectory=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a
+ directory.</para>
+
+ <para><varname>ConditionPathIsSymbolicLink=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a symbolic
+ link.</para>
+
+ <para><varname>ConditionPathIsMountPoint=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a mount
+ point.</para>
+
+ <para><varname>ConditionPathIsReadWrite=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether the underlying
+ file system is readable and writable
+ (i.e. not mounted
+ read-only).</para>
+
+ <para><varname>ConditionDirectoryNotEmpty=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a non-empty
+ directory.</para>
+
+ <para><varname>ConditionFileNotEmpty=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and refers to a regular file
+ with a non-zero size.</para>
+
+ <para><varname>ConditionFileIsExecutable=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists, is a regular file and marked
+ executable.</para>
+
+ <para>Similar,
+ <varname>ConditionKernelCommandLine=</varname>
+ may be used to check whether a
+ specific kernel command line option is
+ set (or if prefixed with the
+ exclamation mark unset). The argument
+ must either be a single word, or an
+ assignment (i.e. two words, separated
+ '='). In the former
+ case the kernel command line is
+ searched for the word appearing as is,
+ or as left hand side of an
+ assignment. In the latter case the
+ exact assignment is looked for with
+ right and left hand side
+ matching.</para>
+
+ <para><varname>ConditionVirtualization=</varname>
+ may be used to check whether the
+ system is executed in a virtualized
+ environment and optionally test
+ whether it is a specific
+ implementation. Takes either boolean
+ value to check if being executed in
+ any virtualized environment, or one of
+ <varname>vm</varname> and
+ <varname>container</varname> to test
+ against a generic type of
+ virtualization solution, or one of
+ <varname>qemu</varname>,
+ <varname>kvm</varname>,
+ <varname>vmware</varname>,
+ <varname>microsoft</varname>,
+ <varname>oracle</varname>,
+ <varname>xen</varname>,
+ <varname>bochs</varname>,
+ <varname>chroot</varname>,
+ <varname>openvz</varname>,
+ <varname>lxc</varname>,
+ <varname>lxc-libvirt</varname>,
+ <varname>systemd-nspawn</varname> to
+ test against a specific
+ implementation. If multiple
+ virtualization technologies are nested
+ only the innermost is considered. The
+ test may be negated by prepending an
+ exclamation mark.</para>
+
+ <para><varname>ConditionSecurity=</varname>
+ may be used to check whether the given
+ security module is enabled on the
+ system. Currently the only recognized
+ value is <varname>selinux</varname>.
+ The test may be negated by prepending
+ an exclamation
+ mark.</para>
+
+ <para><varname>ConditionCapability=</varname>
+ may be used to check whether the given
+ capability exists in the capability
+ bounding set of the service manager
+ (i.e. this does not check whether
+ capability is actually available in
+ the permitted or effective sets, see
+ <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for details). Pass a capability name
+ such as <literal>CAP_MKNOD</literal>,
+ possibly prefixed with an exclamation
+ mark to negate the check.</para>
+
+ <para><varname>ConditionHost=</varname>
+ may be used to match against the
+ host name or machine ID of the
+ host. This either takes a host name
+ string (optionally with shell style
+ globs) which is tested against the
+ locally set host name as returned by
+ <citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
+ or a machine ID formatted as string
+ (see
+ <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
+ The test may be negated by prepending
+ an exclamation mark.</para>
+
+ <para>Finally,
+ <varname>ConditionNull=</varname> may
+ be used to add a constant condition
+ check value to the unit. It takes a
+ boolean argument. If set to
+ <varname>false</varname> the condition
+ will always fail, otherwise
+ succeed.</para>
+
+ <para>If multiple conditions are
+ specified the unit will be executed if
+ all of them apply (i.e. a logical AND
+ is applied). Condition checks can be
+ prefixed with a pipe symbol (|) in
+ which case a condition becomes a
+ triggering condition. If at least one
+ triggering condition is defined for a
+ unit then the unit will be executed if
+ at least one of the triggering
+ conditions apply and all of the
+ non-triggering conditions. If you
+ prefix an argument with the pipe
+ symbol and an exclamation mark the
+ pipe symbol must be passed first, the
+ exclamation second. Except for
+ <varname>ConditionPathIsSymbolicLink=</varname>,
+ all path checks follow
+ symlinks.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>SourcePath=</varname></term>
+ <listitem><para>A path to a
+ configuration file this unit has been
+ generated from. This is primarily
+ useful for implementation of generator
+ tools that convert configuration from
+ an external configuration file format
+ into native unit files. Thus
+ functionality should not be used in
+ normal units.</para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ <para>Unit file may include a [Install] section, which
+ carries installation information for the unit. This
+ section is not interpreted by
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ during runtime. It is used exclusively by the
+ <command>enable</command> and
+ <command>disable</command> commands of the
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ tool during installation of a unit:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><varname>Alias=</varname></term>
+
+ <listitem><para>Additional names this
+ unit shall be installed under. The
+ names listed here must have the same
+ suffix (i.e. type) as the unit file
+ name. This option may be specified
+ more than once, in which case all
+ listed names are used. At installation
+ time,
+ <command>systemctl enable</command>
+ will create symlinks from these names
+ to the unit file name.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>WantedBy=</varname></term>
+ <term><varname>RequiredBy=</varname></term>
+
+ <listitem><para>Installs a symlink in
+ the <filename>.wants/</filename>
+ or <filename>.requires/</filename>
+ subdirectory for a unit, respectively. This has the
+ effect that when the listed unit name
+ is activated the unit listing it is
+ activated
+ too. <command>WantedBy=foo.service</command>
+ in a service
+ <filename>bar.service</filename> is
+ mostly equivalent to
+ <command>Alias=foo.service.wants/bar.service</command>
+ in the same file.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Also=</varname></term>
+
+ <listitem><para>Additional units to
+ install when this unit is
+ installed. If the user requests
+ installation of a unit with this
+ option configured,
+ <command>systemctl enable</command>
+ will automatically install units
+ listed in this option as
+ well.</para></listitem>
+ </varlistentry>
+ </variablelist>
+
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.snapshot</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ </para>
+ </refsect1>
+
+</refentry>